www.coirboard.gov.in Recruitment 2013 Coir Board

[hemalathaijt]

Organization : Coir Board
Recruitment Page : http://coirboard.gov.in/index_%20notification.htm

Stenographer, Training Assistant Recruitment : http://www.indianjobtalks.com/forum/...ad.php?t=73087

All posts tagged as <coirboard.gov.in>

Following is the list of recruitment announcements in Coir Board for the year 2013 :
1) Director
Number of Vacancies : 01
Last Date :18.02.2013.

2) Project, Incubation Assistant
Number of Vacancies : 09
Last Date :20.03.2013.

[hemalathaijt]

Name of the organisation : Coir Board (coirboard.gov.in)
Name of the post : Recruitment 2013 Director
Reference No. : CB/Adm./2013/4/1 18.01.2013
Advertisement : http://coirboard.gov.in/News/notific...tification.pdf

Applications are invited from candidates possessing the qualifications given below for appointment to the post of Director(Research, Development, Training & Extension) in the Pay Band of Rs.15,600-39,100+7600(Grade Pay), under the Coir Board. The eligibility conditions are as detailed below;

Name of the post : Director
No. of Post : One
Age : Not exceeding fifty years as on 18.02.2013

Educational qualifications : “Doctorate in any branch of Textile Technology or Textile Chemistry or Mechanical Engineering or Applied Chemistry with at least 10 years experience in research, development, programming, training and extension work in the field of coir or any other natural fibre. Preference will be given to persons who have published papers in any of the fields.

Fee : Rs.100/-
Demand Draft only drawn on any Bank, payable at Ernakulam in favour of Secretary, Coir Board, Ernakulam.
Note : No fee is payable by SC,ST,PH, Ex-Servicemen and Female candidates.

How to Apply :
Applications on plain paper superscribing “Application for the post of Director (Research, Development , Training & Extension)” giving full bio-data together with copies of testimonials duly attested by a Gazetted Officer in proof of age, qualifications, experience, etc. should reach the
Secretary, Coir Board,
Coir House, P.B.No.1752,
M.G.Road, Ernakulam,
Kochi-16, Pin-682 016

Last Date : 18.02.2013.

Note : Those who are working in Govt. Departments/ PSU’s / Govt. Organizations should apply thorugh proper channel with Vigilance Clearance Certificate and copies of the ACRs/APARs for the last 5 years.

[hemalathaijt]

Name of the organisation : Coir Board (coirboard.gov.in)
Name of the post : Recruitment 2013 Project, Incubation Assistant
Reference No. : CB/Adm/2005/1/7/Vol. II; 25-02-2013
Advertisement : http://coirboard.gov.in/News/notific...RI_Project.pdf

Applications are invited for engagement of Project Hands under various Research Projects being carried out at Central Coir Research Institute, Coir Board, Kalavoor P.O., Alappuzha-688 522, Kerala, places noted against the projects on contract basis, for a period of one year, which is likely to be extended for a maximum period of three years subject to necessity, as per the details given below;

I. Name of the Project : Operationalisation of Library/ ASTM/ Museum
Name of the Post : Project Assistant
No. of post : 1
Qualification : Degree in Arts with 2 years experience in documentation of Museum objects, storage and exhibit preparations
Monthly Remuneration : Rs.10,000/-

II. Name of the Project : Establishment of an Incubation Centre at CCRI
i)Name of the Post : Incubation Co-ordinator
No. of post : 1
Qualification : Ph.D in Science/M.Tech in engg./MSc. in Science/B.Tech.in Engg.; For Ph.D/M.Tech, 2 years and for M.Sc/B.Tech 3 years experience in incubation & Technology transfer is desirable
Monthly Remuneration : Rs.20,000/-

ii)Name of the Post : Incubation Assistant (Engineering)
No. of post : 1
Qualification : B.Tech. in mechanical engineering with 2 years experience in respective field
Monthly Remuneration : Rs.14,000/-

iii) Name of the Post : Incubation Assistant (Geotextiles)
No. of post : 1
Qualification : B.Tech.in geotechnical/ structural engineering/ Civil Engineering with 2 years experience in respective field
Monthly Remuneration : Rs.14,000/-

iv) Name of the Post : Secretarial Assistant
No. of post : 2
Qualification : Graduate with Typewriting Higher with two years experience in respective field-
Computer knowledge is desirable
Monthly Remuneration : 7,000/-

III. Name of the Project : Setting up of a Dye Extraction Plant at CCRI
i)Name of the Post : Project Associate
No. of post : 1
Qualification : M.Sc. in textile Chemistry or degree in textile chemistry with 2 years experience in synthesis/extraction of dyes preferably in Natural dyes.
Monthly Remuneration : Rs.14,000/-

ii) Name of the Post : Project Assistant
No. of post : 1
Qualification : M.Sc. in environmental science/Analytical Chemistry with 2 years experience in dyeing analysis of effluent is desirable
Monthly Remuneration : Rs.14,000/-

iii)Name of the Post : Project Assistant
No. of post : 1
Qualification : Degree in Textile Chemistry or Diploma in Textile Chemistry with 2 years experience in dyeing preferably in natural dyes
Monthly Remuneration : Rs.10,000/-

Age group : 25-45 years.

How to Apply :
Applications on plain paper, along with complete bio data, recent passport size photograph, attested copies of all certificates and mark sheets may be forwarded to the undersigned in the address given below so as to reach at 5 P.M on or before 20.03.2013.
Director,
RDTE, Central Coir Research Institute,
Coir Board,
Kalavoor P.O.,
Alappuzha-688 522, Kerala.

Last Date : 20.03.2013.

[Unregistered]

I am 40 years old. Can I apply for the post of Director?
I am master degree in ancient history above 40 years. I am looking for government job.

Age : Not exceeding fifty years as on 18.02.2013 for the post of Director

If you have required eligibility criteria as per given on the notification, you can apply.

[Unregistered]

GOVIND VIJAYAN
Email : govindvijayan86 AT yahoo.com

CAREER OBJECTIVE :
To work in recent dynamic and growing projects and to understand exact requirement, wherein I can apply my skills and knowledge to optimum use for delivering the best results expected by the Organization and to gain value addition from them. Thus enabling me to grow and become a part of the growing management.

EDUCATIONAL QUALIFICATIONS :
COURSE SPECIALIZATION COLLEGE/SCHOOL PERCENTAGE Month & Year of Passing :
Master of Engineering CAD/CAM University College of Engineering, Osmania University and Central Institute of Tool design (MSME division, Govt. Of India). 71.7 October, 2011
Bachelor of Technology Mechanical College of engineering, Amrita University 62.7 May, 2009
12th Maths, physics, chemistry, Computer science. Bharatiya Vidya Bhavans, Thrissur 75.0 March, 2005
10th General Bharatiya Vidya Bhavans, Thrissur. 85.0 March, 2003

PROFFESIONAL EXPERIENCE :
From March 2011 - Present
Working in Infotech-Enterprises Limted, Hyderabad – One of the leading Mechanical Engineering Services Company Globally.
Role : Design Engineer
Projects Handled : March 2011 to Nov 2012
Design & Product Definition for HPC Rotors of Gas Turbine PW 1000G Engine.
1. Product Definition and Design for 30K HPC (High Pressure Compressor) Rotors including detail design for IBR ( Integrally Bladed Rotors).
2. The CICR (Component Interface Coordination Requirement) Layout Design For 30 K HPC Rotor.
3. Tolerance Stack up and Gap calculations for 30K HPC Rotor Section.
4. Experiments to Production conversion tasks of BA/MRJ Product Definitions.
5. Structure support for 30K HPC with Ansys.

November 2012 –Present
Gas Turbine PW 1000G Engine – Fancase Design
1. Leading the Design task of Fancase and its interface components for Ishikawajima-Harima Heavy Industries Co., Ltd and Pratt N Whitney Co-Owned Components interface.
2. CICR (Component Interface Coordination Requirement) Layout Design for block 2 changes.
3. Assembly configuration and design proposals for Fancase and its components.

Software used : UNIGRAPHICS , ANSYS, Pro-E

TECHNICAL SKILLS :
Subject Knowledge : Mechanical Vibrations, Mechanical Design, FEM.
Modeling Software : UNIGRAPHICS, Pro-E, AUTOCAD.
Analysis software : ANSYS, MATLAB.
Software Languages : Academic knowledge on C++ coding.

ACADEMIC PROJECTS :
ME CADCAM Project :
The Finite Element Based Analysis of Magneto Rheological Dampers :
** A Finite Element Model built to analyze and examine a 2-D axi-Symmetric MR Dampers.
** The Study is done for four different configurations of an MR damper piston to determine how changing the shape of piston affects the maximum forces that Damper can provide.
** The Magnetic flux density contour before and after reaching the Rheological Saturations.
** Different Model Studies are done in order to find which models produce maximum force to the wheels.
** The Models are made designed in Pro –E, and the following analysis done in ANSYS software.

BTech FINALPROJECT :
Semi active Vibration Control of an Automobile Suspension System.
** The Analysis is done on a ¼ car Model.
** The analysis is done in MATLAB.
** The Simulation is done for the control systems using MATLAB Simulink.
** The results are then applied to half car and Full car model.

MINI PROJECT :
The design and Fabrication of a scooter compatible for physically challenged, through modifications made on a 4-Stroke kinetic Honda scooter.

PERSONAL INFORMATION :
Date of birth : 5th November 1986.
Gender : Male.
Languages known : English, Malayalam, Hindi, Spanish