Ask Question / Post resume

Post a reply to the thread: Engineer Rotating & Static : Global Oil & Gas Technology Netherlands

Your Message

Your Username:

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest;63181]SHAIK KARIMULLASHA
S/o SK.Esub John
D.NO; 62-2-43
Shareef Street
J Ramarao peta
Kakinda.
E.G.Dt, Andhrapradesh
India-533002
 Karimulla_sha3461 AT yahoo.co.in 
[b]Mobile [/b]: +91 9391957196 
[b]EDUCATIONAL QUALIFICATION [/b]:
- B.Tech in Mechanical Engineering with 2nd class through distance education from Jawaharlal Nehru Technological University, Hyderabad
- Diploma in Mechanical Engineering with 1st class from Andhra Polytechnic, Kakinada. 
[b]PROFESSIONAL QUALIFICATION [/b]:
- Trained on Vibration Monitoring, Analysis & In-situ balancing conducted by IRD Mechanalysis, Channi.
- Trained on “Machinery vibration analysis-1” conducted by IRD Mechanalysis, Channi.
- Trained on “Welding and Inspection” conducted by BHEL, Trichy. 
- Qualified as BARC LEVEL I in RT.
[b]PERSONAL DETAILS [/b]:
[b]Father’s name  [/b]: SK Esub John 
[b]Nationality/Religion  [/b]:
 Indian/Muslim
[b]Date of birth  [/b]:
 [b]10th March 1986 Marital status  [/b]: Un-Married
[b]EXPERIENCE SUMMARY [/b]: 
Having 5+ years of experience in the inspection. 
[b]- June 2004 to August 2005 [/b]: Worked as Inspection Supervisor in M/S Sri Yanam Steels Pvt Ltd.
[b]- Augast 2005 to till date [/b]: Working as Inspection Jr Engineer with Nagarjuna Fertilizers & Chemicals Ltd., Kakinada and involved in plant inspection 
[b]Key Skills & Abilities [/b]:
I . CONDITION MONITORING EXPERIENCE IN AMMONIA, UREA, POWER PLANT & OFFSITES
Condition Monitoring of rotating equipments like pumps, motors, fans & blowers, compressors & turbines, etc., 
Preparing computerised daily schedules for Condition Monitoring of rotating equipments for the entire plant.
Identifying different problems such as unbalance, mis-alignment, mechanical looseness, deterioration of bearings, oil whirl, rub, turbulence, cavitation, etc., for machinery and suggesting corrective action.
Dynamic and insitu-balancing of various type of rotors and impellers of pumps, blowers and compressors using balancing machine Schenck-Avery, IRD B-50 F and ABRO and computerised balancing software.
Preparation of inspection reports and giving recommendations for repair / replacement / modifications.
On line computerised condition monitoring of compressors & turbines using Bently Nevada’s Dynamic Data Manager ( DDM2 ) & Transient Data Manager (TDM) with DM2000 software. 
The following instruments are being used condition monitoring of rotating equipments at NFCL.
- 01Db Movipack VIBRATION ANALYZER AND BALANCING INSTRUMENT
- IRD-306 (Portable vibration meter)
- IRD-308 (Portable vibration meter)
- IRD-350 (Portable vibration meter)
- IRD-880 (Portable vibration analyzer)
- FAST TRACK USING IQ-2000 SOFTWARE ( Portable FFT Analyzer)
- SPM 43A & A2011 USING CONDMASTER SOFTWARE FOR BEARING CONDITION ANALYSIS
- BENTLY NEVADA’S DYNAMIC DATA MANAGER (DDM) AND TRANSIEMT DATA MANAGER(TDM) ONLINE CONDITION MONITORING SYSTEM FOR COMPRESSORS, TURBINES & CRITICAL PUMPS
- IRD B-50F, ABRO and SCHENCK-AVERY BALANCING STAND FOR DYNAMIC BALANCING OF PUMP SHAFTS AND COMPRESSOR/TURBINE ROTORS
- VIBROTIP WITH TIPTREND SOFTWARE (USED FOR MEASURING VIBRATION SPEED, BEARING CONDITION, TEMPERATURE & LEAK DETECTION)
- ONOSOKKI CF-250 PORTABLE FFT ANALYZER
- ULTRA PROBE FOR ASSESING THE CONDITION OF BEARINGS
- BENTLY NEVADA TK-81 VIBRATION ANALYZER
- MIKRON M SERIES INFRARED PYROMETERS OF DIFFERENT RANGES
- INFRARED THERMAL IMAGING CAMERA
[b]INSPECTION [/b]:
- Internal, On-stream and External inspection of all process plant equipments – pressure vessels, Columns, Reactors, Shell and tube heat exchangers, Air cooled exchangers, Storage tanks, Steam Boilers, fired heaters, HRSGs, process piping and ancillary equipments. 
- Assessing condition of the static equipment using conventional and advanced NDT techniques.
- Sound knowledge on different materials used in process industry in high/low temperature, corrosive environments and experience with welding practices and inspection practices of these materials.
- Having good exposure to complete inspection of High temperature steam reformers constructed with Ni based alloys and fired heaters. Inspection of high pressure multilayered Reactors and internally lined/cladded vessels. Involved in failure analysis of reformer tube failures, heat exchangers and pressure vessels in process plant.
- Conducting welder qualification tests, reviewing WPS & PQR and stage wise welding inspections and quality control.
- Vibration analysis and trouble shooting of rotating machinery. 
- Able to Plan and implement inspection activities, supervise manpower during planned and unplanned shutdowns and Major turn arounds. Familiar with ASME,API & Vibration codes and standards
- Good verbal and written communication skills. Technical report writing and presentation skills. Adaptability to new work situations. Ability to work under extreme conditions.
[b]About Nagarjuna Fertilizers facilities [/b]: 
[b]Nagarjuna Fertilizers and Chemicals Limited, Kakinada situated in east coast of India is one of the leading manufacturers of ammonia and urea. It is a new modern ISO 9001 [/b]:2000, ISO 14001 and ISO18001 certified British Five star rated plant, using HALDOR TOPSOE Technology for Ammonia manufacturing and SNAMPROGETTI Technology for Urea manufacturing. It has two Ammonia Plants of 900 MTPD capacity each and two urea plants of 1500 MTPD capacity each with the necessary Offsite facilities for its treating water, Effluents, Generation of steam(100MTPH Boilers 2nos, one 100MTPH and two 25MTPH HRSGs) and Captive power plant besides Nitrogen and Ammonia storage facility. The plant was run successfully at 142 % capacity utilization. 
[b]STATIC EQUIPMENT INSPECTION [/b]:
- Carrying out Internal visual inspections, on-stream and external inspections of static equipment which includes separators, drums, columns, reactors, reformers, fired heaters, High pressure steam boilers, HRSGs shell and tube heat exchangers, air cooled exchangers etc.
- Complete inspection of Fired heaters and reformers involving Automatic Ultrasonic testing, Creep measurement, magnetic permeability measurement, Magnetism measurements using permanent magnets, Thickness measurement, Ferrite measurement and DPT.
- Leak testing of heat exchangers by pneumatic test, hydrotest, ultrasonic leak detection and vacuum leak detection.
- Carrying out heat exchanger tube inspection by Eddy Current Testing for Magnetic and non magnetic materials. 
- Temperature monitoring of fired heaters, reformer tubes, insulated and refractory lined vessels by means of Thermal Imaging and Infra-red pyrometers and identifying areas of concerns and proposing remedial measures.
- Carrying out fiberscopic inspection and recording the observations wherever limited access for internal inspection.
- Inspection non metallic vessels i.e. GRP and FRP vessels. Condition assessment of rubber lined vessels, tanks and piping using Spark testing and Shore hardness measurement.
- Performing, reviewing and evaluating NDT reports which includes DPT, Fluorescent LPT&MT, UT, RT, Material analysis, Hardness measurement, Ferrite check and Welding inspection.
- Preparing check lists for static equipment inspection and assigning TMLs for piping and equipments for corrosion monitoring. 
- Reviewing Welding procedure specifications and Procedure Qualification Records and conducting/reviewing welder qualification tests. 
- Preparation of repair welding procedures and stage wise welding inspections.
- Reviewing quality dossiers, Conducting Welder qualification tests and certifying.
- Inspection of incoming material at stores consisting of machinery spares, bearings, pipes and pipe fittings, etc., by using different NDT techniques
- Preparation of equipment inspection reports and updating inspection asset data base including maintenance/modification histories. Preparation of technical presentations and Major turnaround reports.
- Preparation of reports and sending recommendations on the repairs & modifications if any using different packages like SAP R/3, MS Office, Lotus Notes & Oracle based soft ware.
- Identifying areas of concern and proposing dedicated inspection procedures to resolve routine troubles to improve plants Integrity. 
- Very well Conversant with safety and work permit systems and procurement of materials and controlling of inventory during plant shutdown.
[b]MAJOR INSPECTION INSTURUMENTS USED [/b]:
- KRAUT KRAMMER USN52L UT flaw detector, 
- THERMACAM thermal imaging system, 
- AMERTEST- 660 radiography camera, 
- Optical Emission Spectroport & Alloy Analyser for material identification, 
- Gauss meters, Ferrite meters, OD tapes, Magnetic permeability meters, 
- Olympus make Industrial fiberscope, Ultra Probe,
- ECT MAD8D Eddy current system, etc.,[/QUOTE]

All times are GMT +5.5. The time now is 10:12 PM.