Ask Question / Post resume

Post a reply to the thread: www.matrixquality.com Matrix Quality Verification Services Pvt Ltd Bangalore : Welding Inspector, NDT

Your Message

Your Username:

Click here to log in

Notes:-
1) You can copy and paste your full resume in the box below.
2) Or you can ask your question. We try to answer, as far as possible.

Title:

[QUOTE=Guest;164484]T.SURESHKUMAR 
 [b]Email [/b]:tskumar12355 AT gmail.com
SEEKING A SUITABLE POSITION IN QUALITY CONTROL DOMAIN 
BACHELOR OF MECHANICAL ENGINEERING 
( ASNT Level II in RT, PT,VT, UT&MPT )
Recognised for 100% QUALITY Work/ Perfect Safety Record
PROFILE AT A GLANCE
- A dynamic & competent professional with 5 years of experience and strong background in the field of construction,fabrication,erection, which involves supervision, quality control of welding, piping, pipeline,boiler components & test package review, witness of pressure test and non-destructive examination of various construction such as oil & gas sepration plant,petrochemical plant and Refinery work with both and EPC orginatation, Fabrication of Boiler components, pressure parts,non-pressure parts,pressure vessels,heat exchangers,tanks, duct,etc.,.
- Conversent with code and standard and project specification such as ASME/ANSI B31.1, B31.3, ASME sec I,II ,V, VIII, IX.,
- Proficient in Oil, Gas, Petro chemical Sector and Power Stations
- Outstanding work ethic with attention to quality, costs and project scheduling (deadline).
- Highly organised & dedicated with a positive attitude. Self motivated; able to set effective priorities and handle multiple assignments under high pressure within tight deadlines; adopt easily to new concepts and responsibilities.
AREAS OF EXPERTISE
 
- Strong Technical & Mechanical Aptitude
- Regulations & Code compliance
- Customer service management
- Team Management
- Custom Fabrication & Welding
- Flexible and adaptable
- Quality Control – Attention to detail
- Safety & Security Coordination
 
CAREER PROFILE
 Career Progression
Orgainsation Designation Duration Project
Nasser S.Al-Hajri Corp., Jubail KSA. QA/QC Engineer April 2010 to Till Date National Chevron Phillips project,saudi aramco project
G.B Engg Ent(P) Ltd.,
INDIA., QA/QC Engineer Mar 2007 to Mar2010 Thermax,Ansaldo,Ijt,Kcp,enmas
KEY SKILL
- Excellent Knowledge of applicable industry standards and QC activities in Welding, Piping and NDT.
- Overall monitoring implementation and outputs of quality control on the project. 
- Experience in Co-ordination of site inspection activities.
- Experience in establish welding requirements against specifications for entire projects.
- Experience in material receiving inspection and review of material test certificates and related documents.
[b]- Familiar with ISO 9001 [/b]:2008 – Quality Management System requirements
- Follow of QA/QC procedures, method statements and ITP. 
- Experience in develop and co ordinate recommended corrective and preventive actions.
- Experience in UT, MPI, VT,PT, PMI, and Hardness testing.
- Experience in Monitoring heat treatment activities.
- Experience in establishing welding procedure qualification and welder qualification.
- Familiar with welding surveillance inspection and monitoring welder performance. 
- Conduct routine auditing on contractors project records.
- Review of pressure test packs and witnessing leak testing.
- Test pack wise Punch listing before Leak test and system wise punch listing after leak test 
- Inspection of re instatement after leak test.
- Conversant with carbon steel, low alloy steel, austenic stainless steel, duplex stainless steel and Nickel based Alloy welding. 
- Experienced in establishment of punchlist sytem,reviews mechanical completion submissions to ensure that all QC Inspection requirements have been met. 
PROJECT MANAGEMENT & RESPONSIBILITY
- Reporting to QC Lead inspectors. Plan and Coordinates inspection activities for various discipline inspectors at site and reports to the QC Manager on Quality Surveillance issues. 
- And to verify the completion of the Quality records of each of the Respective disciplines in compliance with the requirements of the Project and the Quality management system.
- Special expertise in projects related to Oil & Gas Industry, Petrochemicals, Power Plant Natural Gas Transmission, Distribution Pipeline and Gas Plant Project Construction activities.
- Review/Validate and approve and contractors quality documents such as Welding procedure specification , PQR, Work Method statement, Standard Operating Procedures, Standard Inspection Procedures, Inspection Test Plans, Material Test Certificate, Equipment Health Certificates, Instrument Calibration Certificates, etc.
- Witness the Mechanical test of PQR, like Bend test, Hardness test, Tensile test, Charpy impact test etc.
- Witness of welder performance quanification, and approvel.
- Review of the project scope of work, material specifications, and IFC drawings for any conflict with the requirement of the Quality standards and advise the Engineering Department to initiate the corrective actions with the client prior to commencement of work.
- Co ordinate with the client in all technically related issues and resolve The Quality / technical issues by coordinating with the Concerned Disciplines
- Attend the daily Quality tool box meeting with the Quality staff and The construction crews to resolve the technical / Quality issues. 
- Ensure quality norms are maintained as per set standards through inspections, daily checks, supervision etc.
- Prepare and generate daily/weekly/monthly progress reports.
- Supervise& witness final Hydro testing, & Commissioning.
- Conduct inspection of Pre Weld Joint Set-Ups and Post Weld Joint Visuals. Select Welds for NDE and Surface Preparation by Blasting, Airless Painting & Field Joint Coating when required.
- Witness & moniter the Preheat, Post weld heat treatment are carried out according to the requirement of the WPS,project specification and the relevant standard, review the PWHT Chart.
- Interpret and evaluate Non Destructive Examination (VT, RT, DPT, UT, MPT, etc.) and Destructive Testing (Tensile, Impact, Bend, Chemical, etc.)
- Co-ordinate with the NDT third party Examination & testing agencies For the relevant testing and examination as to comply with the Requirements of client.
- To witness and review the hydrostatic test package for the completed quality related documents and reports in accordance with the approved Inspection & Test Plan,like pre hydro test check list, post hydro test check list, line flushing reports, and summery of Welding including reports for NDE, P&IDS, pipe arrangement plan, isometric drawings and certificate for the calibration of the relief valves, pressure gauges etc prior to hydro test of the line etc.
- Coordinate all activities in material handling, storage, preservation etc as to ensure adequate protection & proper storage, handling & Preservation of the materials at site .
- Ensure all safety measures are taken into consideration through compliance to all Applicable Standards & Codes in Practice, adherence to governing codes and adherence to client specifications and maintained of necessary documents.
Accountable for maintaining compliance with Quality Management System and the Local Procedures. In case of any shortfalls, take immediate corrective actions.
EMPLOYMENT RECORD
[b]Apr 2010 to Till Date  [/b]: Nasser .S. Al-Hajri Corporation., Kingdom of Saudi Arabia
[b]Project  [/b]: SAUDI ARAMCO TOTAL REFINARY AND PETROCHEMICAL 
 PROJECT(SATORP)
[b]Client  [/b]: DAELIM
[b]Position  [/b]: QA/QC Engineer.,
[b]Period  [/b]: From march-2011 to Till
[b]Project  [/b]: NATIONAL CHEVRON PHILLIPS PROJECT 
[b]Client  [/b]: Japan gas company (JGC)
[b]Position  [/b]: QA/QC Engineer
[b]Period  [/b]: From Apr 2010 to march-2011 
 
[b]Mar 2007 to Mar 2010  [/b]:G.B ENGG ENT (P) LTD,TRICHY,TAMILNADU,INDIA. Project : Thermax,Ansaldo,Ijt,Kcp,enmas
[b]Position  [/b]: QA/QC ENGINEER
 
EDUCATION
- Master of Busness Administration(M.B.A) OPERATION
- Bachelor of Mechanical Engineering(B.E) MECHANICAL
[b]- Certificate courses [/b]: 
~ ASNT - Level-II in RT, UT, PT,VT & MPT.[/QUOTE]

All times are GMT +5.5. The time now is 08:29 PM.