www.matrixquality.com Matrix Quality Verification Services Pvt Ltd Bangalore : Welding Inspector, NDT

[Admin]

matrixquality.com
Matrix Quality Verification Services Pvt Ltd specializes in the areas of Verification and Certification services. With our rapid expansion into new and evolving markets, we’re always looking for skilled, energetic, enthusiastic people to join our team.

Opportunities exist for professionals for the following :

1. Quality Inspectors
Qualified experienced engineers for third party inspection, expediting and allied services, on contract basis (2years), extensions depending upon performance, customer requirement. MQV offers dynamic and creative work environment, with compensation and benefits on par with industry standards.

Qualification : Diploma in Mechanical / Electrical Engineering
Experience : 3 - 5 years
Area of Experience :
Mechanical : Inspection of Precision Machined parts, welding, NDT (Due weightage given for experience with valid certificate) castings, forgings, plates, bars other bought outs, & calibration of measuring and test equipments.
Electrical : Inspection of motors generators, control panels, transformers, cables, switch gears, relays & all related accessories.
Familiarity : Should be conversant with IS/BS/ASTM/ASME, other related standards


2. Civil Inspectors
Qualified experienced engineers for third party inspection, expediting and allied services, on contract basis (2years), extensions depending upon performance, customer requirement. MQV offers dynamic and creative work environment, with compensation and benefits on par with industry standards.

Qualification : Diploma in Civil Engineering
Experience : 3 - 5 years
Area of Experience :
Civil : Inspection, QA / QC of civil construction projects
Familiarity : Should be conversant with IS/BS/ASTM/ASME, other related standards
Place of Posting : Bangalore / Any where in Karnataka / Any where in India. Also indicate the willingness to go abroad.

If you're looking for a challenging and rewarding career, we invite you to apply. Please fill in your personal details in the form below and submit.

Submit CV here:
http://www.matrixquality.com/careers.html

Matrix Quality Verification Services Pvt Ltd
Platinum City, G/13/03, Site No. 02, Next to CMTI,
HMT ROad, Yeshwanthpur Post, Bangalore- 560 022
INDIA.
Telefax: +91-80-41172751

[Guest-IJT]

Gautam kumar
e-mail : gautam_on_mail AT yahoo.co.in
CAREER OBJECTIVE :-
To be a self dependent and motivated next generation leader with the ability to adapt to the rapidly changing technologies and environment. To associate with an organization that provides the finest work environment and excellent work culture and contributes my best effort for development of the organization as well my career.
SUBJECT :-
B.E. in Mechanical Engineering with around 1year & 9 months experience in Project Execution, operation and Maintenance in the Steel and Power Sector.
TECHNICAL QUALIFICATION :-
Completed Full-Time B.E. in MECHANICAL ENGINEERING from NORTH MAHARASHTRA UNIVERSITY ,JALGAONwith 67% aggregate in the year 2009.
ACADEMICS :-
- Passed 12th fromK.K.MANDAL SCIEN CE COLLEGE DAUDNAGAR, the year 1999.
- Passed 10th from DEHRI HIGH SCHOOL in the year 1997.
WORK EXPERIENCE :-
- Joined Bhushan Steel Limited, Meramandalli, Dhenkanal, ODISA as a GET (Employee Code-G0081) on JULY, 09 and successfully completed the Probation period of 1year.
- Presently designated as A.E. in Bhushan Steel Limited, in the Mechanical Deptt. (CENTRAL UTILITY) of the Project for Steel Production.
JOB DESCRIPTION :-
- Dealing with various Drawing studies & erection of pipe & Valve related to the Project of utility department.
- Presently working as a Project-In-charge and dealing with various heavy Compressor machine Erection, Installation and Commissioning at the Project Sites.
- Dealing with the erection, maintenance and operation of Centrifugal Air Compressors of capacity 9000 cfm mainly meant for supplying Instrument and Service Air for operation of various sections of the plant. Compressor Make- Ingersoll Rand.
- Dealing with Operation and Maintenance of Refrigerated Air Dryers meant for making the Plant Air around 99% moisture free.
- Dealing with C.A. & I.A. Line charging and testing.
- Various testing of L.D.O., H.S.D. & H.F.O. tank.
- Dealing with pump houses and cooling towers of the Plant.
- Dealing with D.M.PLANT mechanical maintenance of Pumps And Valve of Plant.
- Erection and commission of L.P.G. Yard and mechanical maintenance
EXPECTED SALARY :- Negotiable
COMPANY PROFILE :
Bhushan Steel Limited, Presently setting up a large Integrated Steel Plant (Meramundali, Dhenkanal, Orissa) with a Project cost of Rs. 9000 crores to produce 2.5 million tones a Hot Rolled Steel Coils and 0.5 million tones of long products in the first phase and a 450 MW captive power plant in Odisa.The Company is also planning to increase the production capacity of steel to 6MT by an additional investment of Rs. 8000 crores by 2012.
COMPUTER SKILLS :-
- PLATFORMS : WINDOWS VISTA, WINDOWS XP, WINDOWS 2000 & 98.
- OFFICE PURPOSE : MS WORD, MS POWER POINT, MS EXCEL, AUTO CAD 2006.
- OFFICE PURPOSE : WORKING IN DAILY CONSUMABLE LIST IN SAP.
SPECIAL TRAINING :-
One month Yard Engineering training in OIL REFINARY , BAROUNI.
PROJECT :- “Stress mitigation hole with in circular thin plate
STRENGTHS;:- Punctual, Hard-Working, Key-Learner, Leadership Skills.

[vinoth_fusion]

CURRICULAM VITAE
VINOTH.S
QC Welding Inspector

Name : Vinoth.S
Mail ID : vino_fusion AT yahoo.co.in

Educational & Technical Qualifications :
Diploma in Mechanical Engineering (D.M.E)
Additional Certification :
- AWS Certified Welding Inspector (AWS Certificate No :09062511)Valid up to
June 01th 2012

- NACE coating Inspector----Certified (CIP Certification No :20937)Valid up to Nov 30th 2011

- American Society Of Non- Destructive Testing (ASNT) Certified Accordance With SNT-TC-1A Level II in Rediographic Testing,Ultrasonic Testing Valid Till 2011 Magnetic Particle Testing and Liquid Penetrant Testing Valid Till 2013
Year of experience : 4yrs of Exp in QA/QC Welding / Painting Inspection
: 3 yrs of Exp In Oil, Gas and Petrochem
Total experience : Total 7yrs of Exp in Mech Engineering & Allied Fields
Technical Training :
Safety Training undergone in B-Safe at Ras Gas company Limited, Qatar.,
- B-Safe Observer Supervision safety works.
Job profile :
YEAR COMPANY COUNTRY DESIGNATION
FROM TO
Jan 2011
Till date
Cairn Energy India (p) Ltd

INDIA
QC Inspector Welding
Aug 2010
Sep 2010
Sasol synfuels/Raysonics
SOUTH AFRICA
QC Inspector welding
May 2009
April 2010 Dutco McConnell Dowell (ME) LLC DUBAI QA/QC
Welding Inspector
Sep 2006 April 2009 Dodsal/CTJV/Ras Gas QATAR QA/QC
Welding/Painting Inspector
Sep2003 Aug2006 SGS India (p) Ltd INDIA QA/QC
Supervisor

May 2009 April 2010 Gas&Fuel Pipeline at GCS to Hassyan power plant 48” gas pipeline.
QA/QC Inspector in Welding
Dutco Mc Connell Dowell (ME) LLC, Dubai UAE.
Experience summary :
- Maintenance inspection using Radiography, Magnetic Particle and Dye Penentrant test Methods, on pipelines
- Duties include review fabricator and subcontractor's QC programs, WPSs, PQRs, welder certifications and material test reports. Communicate with project engineers (i.e., NCRs, project status), monitor work, perform NDT (VT, UT, MT), final product inspection and complete project documentation requirements (i.e., daily NDT reports, client updates).
- Conduct Procedure qualification and Welder qualification as per API 1104 & ASME Sec IX
- Interpretation of Radiographs as per the ASME Sec.V and API and Witnessing of destructive testing.
- Monitoring all NDT, welding, Contractors inspectors and Ensuring that all codes, standards and specifications requirements are strictly adhered during execution & final signing off of products.
- All stages of Material Inspection (complies with requirements, chemical composition dimensional acceptance of purchased material and review material certificates against heat number).
- Preparation of daily welding visual inspection reports, NDT coordination and Review of NDT Reports.
- A seasoned professional with extensive progressive experience in planning, executing and spearheading Quality control, Supervising and Inspection activities.
- Deft in swiftly executing the projects with competent cross functional skills and ensuring on time deliverables.
- Undertaking initiatives and modifying / enhancing existing system / process to escalate productivity and generate cost saving.
Duties and Responsibility :
- Handled all NDT and Inspection activities for the project.
- Liaison with engineer / works coordinator for conduit of day-to-day quality related activities of the contract.
- Raising deviation/ concession request technical queries as required by project within technical specification.
- Monitoring all contractors, inspectors’ activities and Ensuring that all codes, standards and specifications requirements are strictly adhered during execution & final signing off of products.
- Verifying and approving all construction, Nondestructive testing getting approval from clients.
- Reviewing of welding procedure specifications (WPS) for different materials and joints with different configurations with different materials.
- Managing quality control department in projects, controlling and monitoring all QC & NDT activities as per project quality plan and inspection test plan and controlling activities of all NDT and QC technicians and coordinating with all QC and NDT inspectors.
Sep.2006-April.2009 Contruction&Fabrication of Process piping, steel Structural&Erection.
QA/QC Inspector in Welding/Painting
Dodsal Engg& contruction Pvt.Ltd, RGX-II Project,Doha,Qatar.,
Construction
- Interpretation of weld drawings , weld symbols. Co ordination with production supervisor regarding weld symbols and welding methods.
- Inspected Materials for Piping and Structural. As per ASME B31.3, AWS D 1.1.
- Review and acceptance of Mill certificate for Materials and Welding Consumables as per ASME sec II Part A& Part C.
- Inspected Alignment and Orientation for structural & piping. As per WPS and Specification.
- Inspected Edge preparation before Welding. As per Approved WPS.
- Verification of Preheat as per WPS and Applicable codes.
Welding
- Monitored Welding parameters , interpass temperature and Post heat As per WPS and PQR.
- Visual inspection of Completed welds. As per Codes and Std.
- Conducted Welder qualification test as per ASME SEC IX , API 1104 & Training programs.
- Maintained Welder performance reports.
- Prepared documents , inspection reports in computerized environment .
- Conducted toolbox talks for welders and fabricators.
- Maintaining Project records , reports , and final submission to client.
- Preparing Hydro test Packages in system wise as per requirement.
- Identification of weld repairs and problem solving with welders, inspectors and fabrication supervisor.
Inspection
- Conducted VT, PT, MT, UT, & RT NDT Methods.
- Maintaining of radiography films and final submission to client.
- Review and interpretation of NDT reports and acceptance of welds fittings as per ASME sec V , B31.3, API 1104, AWS D1.1 ( VT,UT,PT & MT )
- Maintaining NDT reports and Weld history sheets.
- Conducted Hydro Testing & Pneumatic Testing. As per ASME B31.3
Sep.2003-Aug.2006 Primary and Secondary steel Structural members and Ducting for power plants & petrochemical plants.
QA/QC Supervisor
SGS India pvt ltd
Duties and Responsibility :
- Responsible to comply with company client and inspection authorities.
- Inspections of Boiler columns top brazing structures and roof walls fit-up, welding, erection. After erection getting clearance from client to go for next step.
- Daily maintain a Electrode storage register and Daily Welding reports to be forward to client and getting clearance for further movement
- Interpretations of radio grapy films comply with acceptance standards.
- Prepare welding procedure specification based on company procedure qualification and conduct welder qualification.
- Implement the company Quality work procedure and Plans.
- Involved in welding inspection for Straight Tube Butt welds, Visual Inspection for tube butt welded joints and inspection of Welding in heat exchangers and pressure vessels.
- Understand fully of the specifications/drawings, documents and Understand planning schedule to achieve the target activities success fully.
- Involved in Painting Final inspection and Heat resistant painting system surface preparation and Final Painting Inspections.
- Preparation for hydro tests and offering of radiography of welds.

[Guest]

Moulappa
- moulappa_r AT yahoo.co.in
OBJECTIVE
Seeking a challenging position as Quality Engineer in Engineering Services sector to achieve career goals and contribute towards organizational success.

Career Summary
Having 3 years of experience in Quality Dept (2 years experience in aerospace and 1year auto)
- Worked Areas like line inspection at shop floor and final inspection.
- Proven ability to interact with Team members, technical persons and end-users.
- Quick learner and ever eager to be involved in a good work environment.
Technical Skills
Operating Systems : Windows 2000 / XP, MS-Office (Word, PowerPoint and Excel).
CAD/CAM Packages : Catia V5 (part design & drafting).


Qualification
College Course Aggregate Year of
passing
Poojya Doddapaa Appa Collage of Engg. Gulbarga. B.E.(Mech.) 60.09 2008
Laxmi Venkateswara Desai
Collage Raichur
PUC
53.24
2002
Govt. juniors collage Hutti gold mines SSLC 63.84 2000
Work Experience
Currently working in OM shakthi hydraulics as quality engineer from May 2011…to till date
- worked in Maini global aerospace Ltd bommansandra from October 2010 To April 2011
- Worked as a Contract Engineer in Hindustan Aeronautics Ltd. Bangalore from September 2008 October 2010
Working Experience
- COMPANY : Hindustan Aeronautics Ltd.(LCA project) Bangalore.
I worked as Contract Engineer in Hindustan Aeronautics Ltd. Bangalore from September 2008 to October 2010. It is one of leading organizations in Defence Sector, Such as LCH, LCA, GSLV, PSLV type of defiance products Etc...
Job Responsibilities in HAL (LCA) and Maini Precission Products. Bangalore complex,
I worked in “Quality Control & assurance Dept” handling various activities of the Dept. Such as,
- Studying drawings.
- Preparing inspection plans as per drawing
- Inspecting the component as per drawing and process control plan by measuring instruments like verneir,height gauge,vision system,roundness and roughness tester etc
- Inspecting the jig dimension by using CMM (BASIC) and also for checking contour.
- Preparation of snag list, if deviation observed in the component if it can be reworked.
- Preparing action plan for the deviation and closing the non conformities
- Referring to the designer for major deviation of his clearance on assembly point of view
- Raising MDR, DDR (drawing discrepancy report) for methods dept. for issue level, clarification etc.
- If is not possible in the sense, going and communicating with senior peoples.
- After accepting the part moving for further operations like cad plating, solutionizing, application of Epoxy primer etc .if Rejected raising the PDO
- Finally Tagging as per route card and checking whether all operations carried out.
- Entering the daily status of work in progress sheet.
- Finally updating the quality documents in IFS & LIS(LCA information system).
- Conducting do it right and sunrise meeting on daily basis for closing non confermitivies
- Monthly reviewing of rework and rejection analysis by using ppm
- Updating the control charts on monthly basis for rework,acceptance and rejection
- Overall responsibility is to see that there is no bottleneck and carry out the operation smoothly
- CURRENT COMPANY : OM SHAKTHI HYDRAULICS PVT LTD PEENYA
Job Responsibilities in OM SHAKTHI HYDRAULICS
Currently working as Quality engineer handling various activities of the Dept. Such
- handling two line inspectors guiding and motivating
- inspecting the final part as per layout plan
- if any deviation raising nc and conducting nc meeting
- preparing 8d report for nc and closing the nc
- communicating with customer for any deviation
- sending the daily report through mail to the director
Technical Profile
Projects carried out :
1. “Erosive wear test on aluminum based metal matrix composites”
2. Seminar;: “NDT (Non Destructive Testing) in engineering”.

[Guest]

RESUME
APLICATION FOR THE POST OF QA/QC INSPECTOR

Email : hemantrathod74 AT gmail.com
hemant_152 AT yahoo.com
Hemantkumar Rathod


Objective :

To work in a challenging environment using my skill & communicate ideas & accomplishing various responsibilities to perform quality work. A career, which is performance based, thereby, providing me an opportunity to play a meaningful role in shaping the future of the organization.
Profile :
A strong willed & energetic individual accompanied by ability to lead & work in Teams in a performance driven environment.
Educational Qualification :
- Diploma in Mechanical Engineering from Government Polytechnic Valsad, Gujarat. Passed with 1st class.
- Passed S.S.C from Gujarat Education Board, Gandhinagar.
Professional Qualification :
- CSWIP 3.1 WELDING INSPECTOR LEVEL II
- Non Destructive Testing ASNT Level – II ( Magnetic Partical Testing)
- Non Destructive Testing ASNT Level – II ( Liquid Penetrant Testing)
- Non Destructive Testing ASNT Level – II ( Radiographic Testing)
- Non Destructive Testing ASNT Level – II ( Ultrasonic Testing )
- Diploma in Computer Applications ( Knowledge in MS Word, Excel)
- Attended & Qualified HSE Safety Training Program of Bahrain Petroleum Company (BAPCO), Bahrain.
Experience :
13 years of Industrial Experience in Quality Control Inspections in the fields of Petrochemical, Refinery and Engineering Projects and Static equipments.
Work Experience of Overseas : 5 Years in Bahrain Oil and Gas Refinery Piping Projects,
Structural Steel Projects and Static Equipment.
Work Experience In India : 8 Years in Fabrication Field (Static Equipment)
1. COMPANY NAME : M/s JOSHI & ASSOCIATES , MUMBAI , INDIA
DESIGNATION : AS A THIRD PARTY INSPECTION ENGINEER
WORKING From November 2010 to still continue
Responsibilities :
- Raw material inspection : visual, Dimension, verification of correctness, Identification and correction with manufacturer’s test certificate
- Inspection of weld edge preparation as per approved drawings, fit- up, Preheating
- Review of welding procedure and Performance qualification record
- Qualify welding procedure and welder as per applicable standard
- Verify correctness of consumables and proper baking / storage
- Ensure proper preheating and monitor welding parameter during welding

- Carryout visual inspection of root run, cap and ensure inter-pass Temperature as per WPS
- Check dimension of finish weld

- Witness necessary NDT such as Penetrant testing , magnetic particle Testing, ultrasonic testing and review of weld radiography film as per applicable specification
- Carried out dimensional inspection on all the finished products like Pipes and fittings etc…
- Hardness survey on the body inner Parts and body based on the client specification
2. COMPANY NAME : Mechanical Contracting & Services Company W.L.L, Bahrain,
DESIGNATION : Mechanical QA/QC Inspector
WORKED From Oct’06 to Oct’2010
ISO 9001 :2000, OHSAS 18001:1999, and ISO 14001:1996 & ASME
Certified ‘U’, ‘S’ & ‘R’ Stamp company engaged in Project Management,
Fabrication of Pressure Vessels, Piping, Structural, and Construction &
Maintenance for Oil, Gas, Petrochemical, Refinery Plant.

Responsibilities :
Involving in all general QA/QC activities, Preparation of QAP and ITP, Welding Procedures and welding Inspection, Welder qualifications & all other related documents. Material inspection & Material receiving Inspection, Dimensional inspection, QA/QC documentation, All stage wise inspection in fabrication, Welding Pipe Spools & Structural jobs. Calibration of pressure gauges/measuring instruments, Co-ordination of Integrated Management System audits, Co-ordination with Authorised Inspector, third party, client Inspectors and NDE sub contractors, Co-ordination of shop and site QA/QC activities.
Clients :
- Bahrain Petroleum Company (BAPCO).
- SAUDI ARAMCO.
- Bahrain National Gas Company (BANAGAS).
- Gulf Petrochemical Industries Company (GPIC).
- JGC Corporation, for Liquid Sulphur Diesel Production Plant (LSDP)
- Foster Wheeler Italiana, for Refinery Gas Desulphurization Project (RGDP)
Work Profile :
- Review and approval of spool travel package in accordance with code and client specification, which includes WPS, PQR, WPQ records and ITP.
- Inspecting and checking parameters of during fit -up, visual inspection of weld joints, Blasting. Inspection of prefabricated material, from raw material receiving inspection to final inspection and documentation.
- Monitoring welding control (Welding Procedure, Welder & consumables) and maintaining welder performance records.
- Monitoring weld rejection rate.
- Dealing with clients and third party inspection for Hold/Witness points according to the approved ITP.
- Reviewing of Radiography films, Post Weld Heat Treatment (PWHT) charts and other NDE reports.
- Preparation and Releasing of final spool travel package.
- Assisting the QA/QC Manager with the day-to-day operation and technical queries.
- Participate in Welders Qualification Test, Internal/External Quality Assurance Audits.
- Reviewing of WPS, PQR and WPQ records.
- Co - ordination with client and Authorized Inspectors.
- Regularizing of Project activities as per Project quality requirements.
- Inspection of raw materials.
- Responsible for inspection, testing and documentation for field fabricated structural material, piping and field erected equipment's (Stationary and Rotary equipment’s).
- Preparation of weld map, weekly and monthly welding summary (Welder Ability Status, NDT Traceability reports, Production Reports)
- Monitoring welding control (welding procedure, welder & consumables).
- Responsible for co-ordination of all NDT activities. To check the weld by various tests like for all materials chemical composition, mechanical properties, hardness, PWHT, RT, MPT, LPT, VT for weld joints
- Witnessing of Hold/Witness points as per the approved Q.A Manual.
- Reviewing of RT films, PWHT charts and other NDE reports.
- Preparation of punch lists and re-inspection of all punch listed item.
- Witnessing of hydro test and other leak test.
- Daily Discussion with Engineering, Production, Quality & Despatch head regarding non conformance, Isometric Drawings, Despatch reports. Resolving of technical queries, Non conformity and corrective action.
Projects Undertaken
Was designated as QA/QC Inspector for various projects like
- Gulf Petrochemical industries Company Shutdown( GPIC )(period Nov./Dec.-2007)
Project involved replacement of column internals, Tubes for Reformer, nozzles for various vessels and Erection of P.G. cooler, steam super heater under inspection of GPIC.
- The Bahrain Petroleum Company B.S.C.( BAPCO ) Low Sulphur Diesel Project Shutdown ( July/August-2007 )
Project involved replacement of column internals, Tube bundle of Heat exchanger, modification of bubble cap tray of perforated tray of Reactor and nozzles of high pressure separator. Under inspection of JGC Corporation Japan.
- Saudi Aramco structural Steel Project ( 750 tones )
Project involved Prefabrication of structural steel under inspection of Saudi Aramco.
- Construction of Air Receiver for GPIC.
Project involved pressure vessels of various sizes as per ASME Sec.VIII Div.1 under inspection of GPIC.
- Construction of S.S & C.S Material Receiving Tank for GPIC
Project involved Construction of 5 Floating roof tanks of various sizes as per API 650 under inspection of TICB.
Worked in Major Projects
1. Low sulphure Diesel Plant Project (LSDPP) Project involved 100000 inch Dia of welding. For BAPCO.
2. R. G .D.P. Project. The Project involved 120000 inch Dia of welding. For BAPCO.
3. Carbon Dioxide Recovery Project. The Project Involved 80000 inch Dia of welding. For GPIC.
4. Lube Base Oil Plant Project. The Project Involved 125000 inch Dia of welding. For BAPCO.
5. Structural Steel Project. The Project involved 700 ton Structural steel. For Saudi Aramco.
Work Experience in India 8 Years in Fabrication Field
3. COMPANY NAME : R D Engineers Pvt. Limited, Mumbai India.
An ISO 9001-2000 Certified Company
DESIGNATION : As an Inspection Engineer.
WORKED For 3 years, From Feb ’03 to Oct ’06.
Responsibilities :
- Inspection activities include review of raw material certificates
- Identification of raw materials
- Verification of calibration certificates
- Verification of handling of Electrodes
- Witness of welder Qualification
- Inspection of welding parameter during welding
- Final visual and Dimension Inspection
- Reviewed of HT charts and final documentation
- Communication with Clients regarding all the respective activities.
- Offloading material on the right place for the job.
- Activities of Hydro test, Pneumatic testing.
- According to the DRGS, WPS& ITP Fabricated the job.
- Carried out of Hydrostatic test and Pneumatic Test of Equipments.
- Preparing procedures for NDT, Quality Assurance plan
Qualifying Welders as per ASME Sec – IX
- Assuring quality of Pressure vessels, Heat Exchangers as per ASME,
TEMA, IBR
- Carry out RT, MPT& LPT inspection for the different clients.
- Proper record maintaining of different equipments during stage inspection
as per approved QAP & Customers, & Inspection requirements
Worked with Major Client :
- RIL (Jamnagar)
- BPCL
- HPCL
- L & T
Work with 3th party Inspection agencies :
- EIL
- LRIS
- IBR
- BVIS
- UDHE INDIA LTD.
- BAX COUNCEL
- TATA PROJECT
- S G S
Experience in execution of the following :
- Pressure vessel as per code ( ASME SEC-VIII DIV-I )
- Column as per code ( ASME SEC- VIII DIV-I )
- Heat exchanger as per code TEMA
- Process piping project as per code Piping code B 31.3
- Piping supports
- Structural steel ( as per code AWS D 1.1 )
- Storage tank as per code ( API 652 )
4. COMPANY NAME : M/S Indus engineering pvt ltd, Mumbai. India
DESIGNATION: Production Engineer
WORKED for 5 years, from sep ’98 to Jan’ 03.
The company manufacturer of c.s & s.s pressure vessel, column, heat Exchanger, Spheres, storage tanks etc…
Responsibilities:
- Handling the shop floor activities and operations.
- Handling the shift wise Man power at site.
- Communication with Clients regarding all the respective activities.
- Stage wise Inspection offering for fit-up & Welding
- Offloading material on the right place for the job.
- Activities of Hydro testing, Pneumatic testing.
- According to the DRGS, WPS& ITP Fabricated the job.
- Proper instruction to the crew for job.
- Weekly meeting for job.
Worked as a various Materials like Carbon Steel, Stainless Steel, Alloy Steel, Dissimilar Material, and Cladding Material. Etc…..

[Guest]

T.SURESHKUMAR
Email :tskumar12355 AT gmail.com
SEEKING A SUITABLE POSITION IN QUALITY CONTROL DOMAIN
BACHELOR OF MECHANICAL ENGINEERING
( ASNT Level II in RT, PT,VT, UT&MPT )
Recognised for 100% QUALITY Work/ Perfect Safety Record
PROFILE AT A GLANCE
- A dynamic & competent professional with 5 years of experience and strong background in the field of construction,fabrication,erection, which involves supervision, quality control of welding, piping, pipeline,boiler components & test package review, witness of pressure test and non-destructive examination of various construction such as oil & gas sepration plant,petrochemical plant and Refinery work with both and EPC orginatation, Fabrication of Boiler components, pressure parts,non-pressure parts,pressure vessels,heat exchangers,tanks, duct,etc.,.
- Conversent with code and standard and project specification such as ASME/ANSI B31.1, B31.3, ASME sec I,II ,V, VIII, IX.,
- Proficient in Oil, Gas, Petro chemical Sector and Power Stations
- Outstanding work ethic with attention to quality, costs and project scheduling (deadline).
- Highly organised & dedicated with a positive attitude. Self motivated; able to set effective priorities and handle multiple assignments under high pressure within tight deadlines; adopt easily to new concepts and responsibilities.
AREAS OF EXPERTISE

- Strong Technical & Mechanical Aptitude
- Regulations & Code compliance
- Customer service management
- Team Management
- Custom Fabrication & Welding
- Flexible and adaptable
- Quality Control – Attention to detail
- Safety & Security Coordination

CAREER PROFILE
Career Progression
Orgainsation Designation Duration Project
Nasser S.Al-Hajri Corp., Jubail KSA. QA/QC Engineer April 2010 to Till Date National Chevron Phillips project,saudi aramco project
G.B Engg Ent(P) Ltd.,
INDIA., QA/QC Engineer Mar 2007 to Mar2010 Thermax,Ansaldo,Ijt,Kcp,enmas
KEY SKILL
- Excellent Knowledge of applicable industry standards and QC activities in Welding, Piping and NDT.
- Overall monitoring implementation and outputs of quality control on the project.
- Experience in Co-ordination of site inspection activities.
- Experience in establish welding requirements against specifications for entire projects.
- Experience in material receiving inspection and review of material test certificates and related documents.
- Familiar with ISO 9001 :2008 – Quality Management System requirements
- Follow of QA/QC procedures, method statements and ITP.
- Experience in develop and co ordinate recommended corrective and preventive actions.
- Experience in UT, MPI, VT,PT, PMI, and Hardness testing.
- Experience in Monitoring heat treatment activities.
- Experience in establishing welding procedure qualification and welder qualification.
- Familiar with welding surveillance inspection and monitoring welder performance.
- Conduct routine auditing on contractors project records.
- Review of pressure test packs and witnessing leak testing.
- Test pack wise Punch listing before Leak test and system wise punch listing after leak test
- Inspection of re instatement after leak test.
- Conversant with carbon steel, low alloy steel, austenic stainless steel, duplex stainless steel and Nickel based Alloy welding.
- Experienced in establishment of punchlist sytem,reviews mechanical completion submissions to ensure that all QC Inspection requirements have been met.
PROJECT MANAGEMENT & RESPONSIBILITY
- Reporting to QC Lead inspectors. Plan and Coordinates inspection activities for various discipline inspectors at site and reports to the QC Manager on Quality Surveillance issues.
- And to verify the completion of the Quality records of each of the Respective disciplines in compliance with the requirements of the Project and the Quality management system.
- Special expertise in projects related to Oil & Gas Industry, Petrochemicals, Power Plant Natural Gas Transmission, Distribution Pipeline and Gas Plant Project Construction activities.
- Review/Validate and approve and contractors quality documents such as Welding procedure specification , PQR, Work Method statement, Standard Operating Procedures, Standard Inspection Procedures, Inspection Test Plans, Material Test Certificate, Equipment Health Certificates, Instrument Calibration Certificates, etc.
- Witness the Mechanical test of PQR, like Bend test, Hardness test, Tensile test, Charpy impact test etc.
- Witness of welder performance quanification, and approvel.
- Review of the project scope of work, material specifications, and IFC drawings for any conflict with the requirement of the Quality standards and advise the Engineering Department to initiate the corrective actions with the client prior to commencement of work.
- Co ordinate with the client in all technically related issues and resolve The Quality / technical issues by coordinating with the Concerned Disciplines
- Attend the daily Quality tool box meeting with the Quality staff and The construction crews to resolve the technical / Quality issues.
- Ensure quality norms are maintained as per set standards through inspections, daily checks, supervision etc.
- Prepare and generate daily/weekly/monthly progress reports.
- Supervise& witness final Hydro testing, & Commissioning.
- Conduct inspection of Pre Weld Joint Set-Ups and Post Weld Joint Visuals. Select Welds for NDE and Surface Preparation by Blasting, Airless Painting & Field Joint Coating when required.
- Witness & moniter the Preheat, Post weld heat treatment are carried out according to the requirement of the WPS,project specification and the relevant standard, review the PWHT Chart.
- Interpret and evaluate Non Destructive Examination (VT, RT, DPT, UT, MPT, etc.) and Destructive Testing (Tensile, Impact, Bend, Chemical, etc.)
- Co-ordinate with the NDT third party Examination & testing agencies For the relevant testing and examination as to comply with the Requirements of client.
- To witness and review the hydrostatic test package for the completed quality related documents and reports in accordance with the approved Inspection & Test Plan,like pre hydro test check list, post hydro test check list, line flushing reports, and summery of Welding including reports for NDE, P&IDS, pipe arrangement plan, isometric drawings and certificate for the calibration of the relief valves, pressure gauges etc prior to hydro test of the line etc.
- Coordinate all activities in material handling, storage, preservation etc as to ensure adequate protection & proper storage, handling & Preservation of the materials at site .
- Ensure all safety measures are taken into consideration through compliance to all Applicable Standards & Codes in Practice, adherence to governing codes and adherence to client specifications and maintained of necessary documents.
Accountable for maintaining compliance with Quality Management System and the Local Procedures. In case of any shortfalls, take immediate corrective actions.
EMPLOYMENT RECORD
Apr 2010 to Till Date : Nasser .S. Al-Hajri Corporation., Kingdom of Saudi Arabia
Project : SAUDI ARAMCO TOTAL REFINARY AND PETROCHEMICAL
PROJECT(SATORP)
Client : DAELIM
Position : QA/QC Engineer.,
Period : From march-2011 to Till
Project : NATIONAL CHEVRON PHILLIPS PROJECT
Client : Japan gas company (JGC)
Position : QA/QC Engineer
Period : From Apr 2010 to march-2011

Mar 2007 to Mar 2010 :G.B ENGG ENT (P) LTD,TRICHY,TAMILNADU,INDIA. Project : Thermax,Ansaldo,Ijt,Kcp,enmas
Position : QA/QC ENGINEER

EDUCATION
- Master of Busness Administration(M.B.A) OPERATION
- Bachelor of Mechanical Engineering(B.E) MECHANICAL
- Certificate courses :
~ ASNT - Level-II in RT, UT, PT,VT & MPT.