www.nocl.co.in Nagarjuna Oil Corporation Ltd Cuddalore : Piping, Static, Rotary, MECHANICAL ENGINEER

[mskavi]

Nagarjuna Oil Corporation Limited Cuddalore : MECHANICAL ENGINEER

Website: http://www.nocl.co.in

Keywords: piping, static, rotary, LSTK, BOOT

Designation: MECHANICAL ENGINEER
Experience: 3 - 8 Years
Location: Cuddalore

Job Description:
To work with CB&I Lummus (Our Project Management Consultants formerly known as ABB Lummus) for erection and construction of 6 MMTPA Refinery Projects at Cuddalore, on three years contract

Desired Candidate Profile:
Should be a mechanical engineer with 3-8 years experience in petroleum refinery/petrochemical industry in inspection and audit, piping, rotary and static equipment, utilities, offsite, power plant.

Company Profile:
Nagarjuna Oil Corporation Limited (NOCL) a Public Limited Company is setting up a 6 MMTPA capacity of Petroleum Refinery at Cuddalore, Tamil Nadu. This project is being promoted by Nagarjuna Fertilizers and Chemicals Limited (NFCL)

Email Address: career@nocl.co.in

[Guest]

CURRICULUM VITAE
KANAKARAJ.G.
Email :Kanaku_tech AT yahoo.com

Career Objective :
To secure a challenging position where I can effectively contribute my skills as chemical engineering Professional, possessing competent Technical Skills.

Educational Qualifications :
Discipline/ Specialization School/college Board/ University Year of Passing % :
B.Tech ChemicalEngineering Veltech high dr.RR dr. SR engg college. chennai Anna University 2011 68%(still 7th sem)
diploma Sugar technology Government poly technic college Trichy-22 DOTE 2008 83%
S. S.L. C Government higher secondary school-annavasal State board 2005 73%

Computer Skills :
Operating System : Windows 98/2000/X
Major Achievements :
- Participated in National Level technical project contest TECHTOP2009 at thiruvananthapuram, kerala state. And win 3rt place.
- And also participated in techno2010 AT ANNA UNIVERSITY
- I got a first place in my diploma course.

INPLANT TRAINING : 2 WEEKS TRAINING IN EID PARRY , NELIKUPPAM 2 WEEKS TRAINING IN EID PARRY, KURUMBUR

INDUSTRIAL VISIT : EID parry,nelikuppam. Aavindairy,sholinganalur
Academic Project

Project1 : Silver extraction (diploma)
DESCRIPTION :
In this project descripe about effluent treatement. The waste hypo solution have more amount of silver from X- RAY flim cleaing that silver is recovered by chemical method.

Project 2 : consumption of steam in sugar process(engineering)
DESCRIPTION :
This project deal with sulphur mlter in sugar industry change the sulphur melting process from steam to electrical coil.

[Guest]

NISHANTH.A
B.E. (MECHATRONICS ENGINEERING)
Mail Id :nishanth.nishanth1 AT gmail.com

CAREER OBJECTIVE :
To sacrifice and devote my full effort comprehensively for the workplace to realize my worthful skills which contribute much to the upgradation and success of my firm.

EDUCATIONAL QUALIFICATION :
COURSE INSTITUTION/SCHOOL BOARD/ UNIVERSITY YEAR OF COMPLETION PERCENTAGE/CGPA :
BE K.S.RANGASAMY COLLEGE OF TECHNOLOGY, TIRUCHENGODE. ANNA UNIVERSITY 2011 8.96
HSC A.R.L.M.Matric.Hr.Sec.School . MATRIC 2007 77.5
SSLC A.R.L.M.Matric.Hr.Sec.School MATRIC 2005 76.3

FIELD OF INTEREST :
Robotics & machine vision system.
Rapid prototyping.

CO CURRICULAR ACHIEVEMENTS :
Attended symposiums in KONGU ENGINEERING, CRESCENT ENGINEERING, DHANALAKSHMI SRINIVASAN COLLEGE OF TECHNOLOGY.
Attended a workshop about 4G TECHNOLOGY at DHANALAKSHMI SRINIVASAN COLLEGE OF TECHNOLOGY.

PAPER PRESENTED :
Robotic localization using intensity of wi-fi map at DHANALAKSHMI SRINIVASAN COLLEGE OF TECHNOLOGY.
Exhaust Gas Re-circulation at CRESCENT ENGINEERING COLLEGE.
Low cost vehicle tracking system at KONGU ENGINEERING COLLEGE.

PROJECTS :
AUTOMATIC DOORBELL ALARM
POWER FAILURE INDICATOR TO ELECTRICITY BOARD.
STUDY ON EMISSION CONTROL BY VARYING ELECTROLYSIS COATING IN EXHAUST PIPE OF FOUR STROKE ENGINE.

SOFTWARE SKILL SETS :
Software known : Pro E, and PLC.
Working Platform : Windows XP, Vista,windows 7.

EXTRA CURRICULAR ACTIVITIES :
Member in CELCAIS.
Player of School Junior badminton team.
Member in NSS.
Member in ISTE.

INDUSTRIAL EXPOSURE :
Undergone In-plant training in NEYVELI LIGNITE CORPORATION and had a good exposure.
Undergone In-plant training in ASIAN PAINTS PENTA DIVISION (Cuddalore) and had a good exposure to turbine, power production.
Undergone In-plant training in M.M.GEARS (Coimbatore).

LEADERSHIP QUALITIES :
Organizer of School Alumni functions for my batch.

HOBBIES :
Riding Bike.
Playing Need for Speed,FIFA 10.
Listening to Music.

[Guest]

RESUME
MOHAN PENTAKOTA
E-Mail ID : pentakota_mohan2000 AT yahoo.com

OBJECTIVE
To be associated with a Progressive and Esteemed Organization and to attain Competent Position, this gives scope to implement my Knowledge and Skills to the almost level for the Betterment of the Organization.
EDUCATIONAL BACKGROUND
- B.Tech (Mechanical) at Krupajal Engineering College with 6.7 CGPA passed in the year 2009
- Intermediate (MPC) at Vignan Vidyalayam with 52.2 % passed in the year 2004
- 10TH (SSC) at Nalanda Residential School with percentage of 65.1 % passed in the year 2002
SPECIALIZATIONS
- Insitu Machining
- Flange Facing Machining
- Valve Lappings
- Milling Beds and Sheets
- Ball Mills
- Using Alignments like Laser and Ferro Laser Tracks
- Using Dial gauge methods
- Fabrication works like ship buildings
SOFT SKILL SET
Languages : C, C++
Operating Systems : Windows 98/XP
Others : Auto-Cad, Data Structures
AREAS OF INTEREST
- Handle different types of projects
- Application Development
TRAITS
- Quick learner and an excellent team player.
- Enthusiastic about applying new technologies, enhancing current technical expertise and applying transferable skill sets.
- Active participant in the annual meets conducted during the due course of my studies.
- Attending workshops conducted in interesting fields.
AWARDS RECEIVED
- Achieved Mr. Perfect Award in Fleurdelis Technologies Pvt. Ltd. on 28th Feb 2011 with 2 stars
- Achieved Mr. Perfect Award in Fleurdelis Technologies Pvt. Ltd. on 28th Feb 2010 with 1 star
- Participated in Blood Donation Camp in college
- Organizing and managing events in FLORESCENCE (Annual Spring Fest of K.E.C)
- Participated in Cricket at Inter-College Sports Meet
EXTRA CURRICULAR ACTIVITIES
- Attending Workshops and Seminars on interesting Subjects/Topics.
- Member of A.S.Raja Voluntary Blood Bank.
PROJECT WORKED AND WORKING ON
1) In Hindustan Shipyard Limited, Visakhapatnam (HSL) worked for INS SINDHUKIRTHI Submarine on Hull Gland Machining for a period of one year from Nov 2009- Nov 2010.
Description :
The project is all about refitting the submarine. In this project we have grinding the rust, we have build the metal, then we done Flange facing and brought the submarine to original position. We have totally worked on 206 glands in the range from 150mm to 1000mm.
2) In Naval Dockyard, Visakhapatnam (NDV) worked for INS VINASH Submarine on Stern Tube Boring Machining like Shafting Machining for a period of one month in Dec 2009.
Description :
The project is all about In-line boring of Thordon bushes through optical sighting between the targets provided by NDV. Each shaft line consists of 3 Thordon bushes, Chamfering (5mm*45deg.), slotting (600mm) of Thordon bushes after machining, Bore ovality tolerance : 0.05mm, Bore tapper tolerance: 0.05mm, After machining there should not be any bottom clearance when the shaft is inserted. Then we have aligned the machine and stared the bore.

3) In HPCL, Visakhapatnam worked for DHDS Department pipeline. We worked on Flange Facing Machining and reactor like tube bundles OD mount facing part is done for a period of one month in Jan 2010.
Description :
(i) The project is all about refitting the reactor with 32inches outer diameter. We have done build the metal and done Flange face. Totally we have done the work on 25 Reactors.
(ii) The same work is carried with the 4 Heat exchangers of 40 inches diameter in the reactor. Building the metal and Flange acing is done on the Heat Exchangers.
4) In Naval Dockyard, Visakhapatnam (NDV) worked for INS RANAVIJAY War Ship on Gas Turbine (GT) bed milling/ beveling part machining for a period of one month in Feb 2010.
Description :
In this project we have worked on the ship in which there are 2 engine rooms that are forward and aft which contains 21 pads. For all the pads we have done bed milling using the reference given by the NDV. The ultimate work is done with 0.1mm accuracy checking with Dial Gauge/Ferro Laser Track. Finally we have drilled holes into the pads.
5) In Steel Plant, Visakhapatnam worked for BF3 plant Hatch cover Machining for a period of two months from March 2010 to April 2010.
Description :
In this project we have done X-Milling and Grooving with the contract of PAULWORTH (Italian Collaboration) with accuracy of 0.1mm. In this project we were appreciated by the Italian based organization for our work.

6) In Visakhapatnam Port Trust (VPT) on AW-DALIEMA TUG & CUT WRITE RIDE TUG on Flange Facing Machining for Shaft Rotating Proportion (SRP) Unit Dec 2010 to March 2011.
Description :
\ In this project we have done Overhead Flange Facing machining on Aw-Daliema and Cut Write Ride Tug with range of 3000mm.
7) In Garden Reach Ship Building Engg. Ltd.,(GRSE) on GT foundation bed milling machining from Jan 2011 to Feb 2011.
Description :
In this project we have worked on the ship in which there are 2 engine rooms that are forward and aft which contains 21 pads. For all the pads we have done bed milling using the reference given by the GRSE. The ultimate work is done with 0.1mm accuracy checking with Dial Gauge/Ferro Laser Track. Finally we have drilled holes into the pads.

[Guest]

RESUME

R.MANOHAR
E-mail : manodme91 AT gmail.com
manomech91 AT gmail.com

CAREER OBJECTIVE :
Wish to seek a challenging future in Mechanical field where my technical analytical and presentation skills will be utilized effectively.

WORK EXPERIENCE :
Designation : Technical Apprentice Trainee.
Name of Company : M/s Bharat Heavy Electricals Limited, High Pressure Boiler Plant, Trichy-620 014.
Department : TUBULAR PRODUCTION/PRODUCTION DEPT., Period of Training : From 07th September 2009 to 06th September 2010.
Now I am working as a Supervisor Trainee (Production & Mainatanence) in JBM AUTO SYSTEMS PVT LTD, Maraimalainagar, Chennai.
Experience in the following fields :
- Supervise the Orbital TIG welding machine.
- Verify the circuit drawings properly.
- Reduce the welding time for one joint.
- Check the RADIO GRAPHIC TEST results and Rectified also for which defect is more.
- Supervise the material movements and system bender machine (70m long tube).
- Supervise the HPS( High Press Shop Machines)

ACADEMIC PROFILE :
QUALIFICATION : DIPLOMA IN MECHANICAL ENGINEERING.
College : Valivalam DesikarPolytechnicCollege, Nagappattinam.
Year of passing : April 2009
Percentage of Marks : 92%

S.S.L.C
School : Govt.Hr.Sec School, Adiyakkamangalam.
Year of Passing : March 2006
Percentage of Marks : 88.4%

COMPUTER KNOWLEDGE :
- AutoCAD
- SAP
- MS Office

[Guest]

CURRICULUM VITAE
Niveth Kumar.D
E-Mail : nivee_cute AT yahoo.com

OBJECTIVE :
Aim to be associated with progressive organization that gives scope to update my knowledge and skills in the accordance with the latest trends, and be part of a team that works dynamically towards the growth of the organization and gain satisfaction.
ACADEMIC CHRONICLE :
2001-2005 B.E - Mechanical Engineering Passed with 62 % From
C.Abdul Hakeem College of Engineering & Technology,
Affiliated to Anna University.
2000-2001 H.S.C Passed with 53% from Bharat Matriculation Higher Secondary School, in Vellore.
1998-1999 S.S.L.C Passed with 55% from Bharat Matriculation Higher Secondary School, in Vellore.

SOFTWARE EXPOSURE
- CATIA, AUTO CADD 2000, PRO-Engineer 2000, M/S Word
EXPERIENCE :

1) Worked as a Quality Inspector in SS INDUSTRIES at Bangalore manufacturing FEED PUMP in FUEL INJECTION PUMP for Heavy vehicles from August-2005 to April-2007
2) Worked as a Quality Engineer in Amman Industries and Fabs at Vellore District(Ranipet) from July-2007 to June-2009
3) Worked as a Quality Inspector in Nettur Technical Training Foundation (NTTF)Private Ltd at VelloreDistrict from September-2009toFebruary-2010
4) Worked as a Quality Engineer in Sri Dhanalakshmi Industries and Fabs at Vellore District(Ranipet) from May-2010 to July-2011
JOB PROFILE
With a new production technologies involved since its volume of business got increased during this process we got engaged and our job profile is as follows.
- After Production, the Component will be taken for Inspection Process.
- Inspection will be done Dimentionaly by using various Gauges & Instruments as per in the Instruction chart.
- During in the Inspection, the Dimentions of the Component will be measured as per the Customer requirements.
- During in the Production inprogress, the component will be checked and Inspection will be done to avoid rejections and reworks.
- All the Measured Components Dimentions should be entered in the Inprocess
Inspection Report Sheet.

- Finally,Visual Inspection done for the Despatch Area.
EXTRA CURRICULAR ACTIVITIES
- Participated in Zonal Level Shuttle Badminton Tournament & Cricket Tournament.
- Participated in Zonal Level Volleyball Tournament & I received applauds as Runners.

- Elected as the Best Student for Extra-Curricular Activities in my school level competition

[saravanan sandy]

RESUME
R.SARAVANAN
e-mail : saravan8990 AT gmail.com


Career objective :
Intend to build a career with leading corporate of hi- tech environment with committed and dedicated people, which will help me to explore fully and realize my potential. Willing to work as a key player in challenging and creative environment.
Work Experience :

Company Profile : AC Nielsen Org Marketing (Marketing Survey)
1Year-PART TIME(Team Leader & Field Work).

Academic Chronicle :
- B.E.MECHANICAL ENGINEERING from Arunai Engineering College, Thiruvanamalai.
Aggregate 68.5%,with FIRST CLASS under Anna University, Chennai.
- HSC (2007) Aggregate 70%, St.Joseph’s Hr Sec School, Cuddalore.

- SSLC (2005) Aggregate 71%, St.Joseph’s Hr Sec School, Cuddalore.
Area Of Interest :

- Design
- Quality
- Sales , Purchase
Industrial Exposure :
- Industrial visits : AUTOSHELL PVT LTD, Coimbatore.
INDOSHELL PVT LTD, Coimbatore.
- In Plant Training : Harbour, Chennai.
Project Done :
. Mini Project : DESIGN & FABRICATION OF PNEUMATICALLY
OPERATED POWER WINDOW.

. Main Project : DESIGN & ANALYSIS OF ROTARY CUTTER FIXTURE , AT MITSUBISHI IN RANIPET.

Other skills :
- CATIA-V5R20
- Basics of CAD
- Assembling of PC and Basic knowledge.
Co-Curricular Activities :
- Volunteer in National Service Scheme-(NSS).
- Participated in 2007 SPORTS MEET and got second place in FOOT BALL MATCH in school level.
- Been an Tresurer for Mechanical Dept. Symposium, ‘FORGE 2010’.
Hobbies :
- Playing Cricket.
- Hearing Songs.
- Playing Carom.
Personal Traits :
- Confidence and ability to learn fast and contribute.
- Believe in teamwork and good team player and can easily fit into any team.
- Flexible enough to pick up new skills, ideas and simulate personal and professional growth.

[Guest]

K.JAGATHEESH,
Email :Jaganwins7 AT Gmail.com
Jagatheesh.kannan AT reliancaada.com
EDUCATIONAL QUALIFICATION :
LEVEL
SCHOOL/INSTITUTE
YEAR OF PASSING
%
GEC Course in Operation & Maintenance in Transmission&Distribution National Power Training Institute,
(Central Ministry of Power),
Bangalore.
2008
73.20
B.E (Electrical & Electronics Engg.) Arunai Engineering college
Anna University,
Chennai. 2007 71.83
Higher Secondary Education,
(Maths & Science Group) Sri Ramakrishna higher secondary school, Vilupuram,
Tamilnadu. 2003 87
SSLC, Matriculation Board. St.Xavier’s Matriculation Board,
Vilupuram,
Tamilnadu. 2001 87
EXPERIENCE DETAILS :

No of years : 4 years from Jan’2009

Company : BSES (A joint venture of Reliance Infrastructure with Govt. of
Delhi)

Company profile : BSES is a group company of Reliance Infrastructure involved in power distribution in Delhi in partnership with Govt. of Delhi. It started power distribution in Delhi in 2002 when privatisation of power distribution was done.
Field of experience :

1) Asst Manager in Planning & Engineering involving erection of 66/11 KV grids, Construction of HT & EHV networks ranging from 11 KV to 66 KV, Erection of transmission towers.
2) Project engineer in erection of 66/11 KV Grid at Commonwealth Games Village at Akshardham, New Delhi.
3) At present working as Asst. Project Manager in erection of 66/11 KV BSES Grid at Sonia Vihar, New Delhi.
4) Also worked as inspection engineer in purchase of various electrical equipments for BSES.
5) Also involved in Operation & Maintenance of various EHV, HV & LV networks like troubleshooting, Fault analysis, and load balancing of DT’s, Preventive maintenance, Predictive maintenance, repair of DT’s, Analysis of protection systems etc.
Current CTC : 4.34 lacs per annun
Additional Qualification :
1) Certified Lead Auditor for OHSAS 18001 dealing with Occupational Health & Safety in organisation who can conduct both internal & certification audit for own & other outside organisation.
2) Finished GEC course in Operation & Maintenance of Transmission & Distribution which deals with practical knowledge of transmission & distribution networks ,equipments involved in T&D networks

3) Certified Lead Auditor for ISO 9001 dealing with Quality management in organisation who can conduct both internal & certification audit for own & other outside organisation.

[Guest]

RESUME
R.T.ARULMOZHI,
E- Mail : arulmozhirt AT gmail.com ,
SUMMARY OF WORK EXPERIENCE :
Mechanical engineering degree with 19 years experience.
8 years experience in site piping engineer (Execution)
(Refinery and petrochemical pipe lines - 27Months)
(Process & Chemical pipe lines - 60 Months)
( Fire protection pipe lines - 16 Months
7 years experience in production field.
4 years experience in erection field.
Additional Qualification .
ASNT Level” 2”.
Primavera (p6)

PREFESSIONAL EXPERIENCE :
ORGANAISATION : M/S Golden Engineering AT Trichy.
(Sub contractor for Cethar Ltd)
DESIGNATION : Production Engineer.
PERIOD : From Feb 2006 To Till date
Nature of work : Fabrication o f Non - pressure boiler components like
Air box, Conveyor, Sample cooler, Hand rails, Stair case handrails
ladders.
ORGANAISATION : M/S Sri Ramana Engineering Works. AT Trichy.
DESIGNATION : Engineer.
PERIOD : From Jan 2002 To Dec 2005.
Nature of Work : Fabrication & Erection of tress Work.
ORGANAISATION : M/S S.M.S Natural Products P Ltd AT Chennai.
DESIGNATION : Plant Engineer.
PERIOD : From Oct 1999 To Dec 2002
PROJECT EXECUTED : Food Processing / Extraction plant AT Indore.
Nature of Work : Fabrication and installation the Plant at” 50kg/s “ operating
pressure Third party inspection by M/S SGS India Ltd.
ORGANAISATION : M/S Artson Engineering Ltd AT Bombay.
DESIGNATION : Sr. Piping Engineer.
PERIOD : From march 1997 To Aug1999
PROJECT EXECUTED : Mangalore refinery and petrochemicals p Ltd. AT Mangalore.
Nature of work : Fabrication ,Erection and testing of Unit piping & Off site piping
Consulted by M/s Engineers India Ltd and M/S Toyo Engineering Ltd.

ORGANAISATION : M/S Devidayal Industries Ltd AT Chennai.
DESIGNATION : Site Engineer
PERIOD : From Sep 1995 To Dec1996
PROJECT EXECUTED : Southern Iron Steel Corporation Ltd AT salem.
Nature of work : Installation of Fire Protection and Fire Detection system.
ORGANAISATION : M/S Petron Engineering Construction Ltd .
DESIGNATION : Engineer
PERIOD : From Aug1993 To Aug 1995
PROJECT EXECUTED : M/S J.K.Pharmachem Ltd AT Cuddalore.
Nature of work : Installation of Fire Protection and Non pressure pipe lines.
ORGANAISATION : M/S Srinivasa Industries AT Trichy.
(B.H.E.L. Ancillary Unit.)
DESIGNATION : Production Engineer.
PERIOD : From June 1992 To Jully 1993
Nature of work : Machining Works.

LIST OF KNOWLEDGE :
1. Getting Site Clearance and Site Closing activities
2. Preparation of daily and weekly work schedule and follow up the progress as per the target.
3. Basic knowledge on international standards like ANSI /ASME .
4. Good coordination with sub contractors and clients for efficient progress.
5. Able to generate isometric drawings from G A & P&I , Engineering Drawings.
6. Preparation of BOQ from engineering drawings and coordination with materials department.
7. Fabrication and Installation of Pipe Lines – Unit piping’s and Off shore piping’s and under ground piping’s as per piping’s specifications with M.S ,S.S Alloy steel.
8. Execute piping and piping supports as per drawings.
9. Conducting approval test for TAC Inspection and Mechanical Clearance, Hydro Test, Holiday Test Pneumatic Test, Seam Test, Stress Relieving test as per Procedure.
10. Preparation as erected drawings.
11. Preparation of work bills and follow up for payments.
PERSONAL DETAILS :
Father’s Name : R. THANGARAJ
Date of Birth : 18-04-1969.
Marital Status : Married.
Passport No : F 3642565
SIGNATURE

[Unregistered]

CURRICULUM VITAE
V.VIJAYARAJAN
Project Engineer (PIPING & PIPELINE)
Email : vijayarajan.mech AT gmail.com

Objective :
TO WORK IN CHALLENGING & RESPONSIBLE POSITION IN A DYNAMICALLY PROGRESSING ORGANIZATION WHICH WILL
GIVE SCOPE TO APPLY MY SKILLS, KNOWLEDGE AND TO CONSTANTLY GROW WITH THE COMPANY AND ATTAIN A
CHALLENGING POSITION IN THE TECHNICAL FIELD.

Professional Qualification :
- B.E Mechanical Engineering with First Class ( 2007 – 2010 )
- Diploma in Mechanical Engineering with First Class ( 2003 – 2006 )

Academic Qualificaticon :
- Govt.Hr.Sec. School with 59% ( 2001 – 2002 )

Technical Qualification :
Course : “ASNT LEVEL II (RT, UT, MT&PT)

Addetional Qualification :
Course : “MS-Office Excel , MS-Office Word, Auto cad 2007.

Professional Experience :
1. Company : Mynor enterprises (Pvt Ltd) (Leading cross country pipelines contractor)
Job Profession : Site Engineer (PIPING & PIPELINE)
Duration : Aug 2010 to Till Date

Duties and Responsibilities :
- ISOMETRICS AND DRAWINGS CHECK.
- DIMENSION CHECK AND WELDING VISUAL INSPECTION
- WITNESS / INSPECT EXECUTION OF ALL SITE TEST (HYDROSTATIC)
- PERFORMED INSPECTION OF FIT-UP AND DIMENSIONAL AS PER ISOMETRIC.
- LINE CHECKING WITH TEST PACKAGES, PUNCH CLEARING, WITNESS AND INSPECTION OF HYDRO TESTING.
- INTERACTION WITH CONCERN DEPARTMENTS AND DISCIPLINES SUCH AS ROW, STRINGING, WELDING, COATING, TRENCHING, LOWERING, OFC & DUCT LAYING, BACKFILLING, TIE – IN , HDD BORING,
- REVIEW DOCUMENTS OF ACCEPTANCE FOR MATERIAL, EQUIPMENT, WELDING, AND PAINTING/COATING.
- CO-ORDINATION WITH ENGINEERING AND QUALITY CONTROL. PUNCH LIST MEETING WITH CLIENT TO RESOLVE CONSTRUCTION ISSUES.
- RESPONSIBLE FOR VERIFICATION/DOCUMENTATION OF CONTRACTOR COMPLIANCE TO THE CONTRACT SPECIFICATION AND QUALITY CONTROL PROGRAM AND THAT THE FABRICATION AND INSTALLATION GROUPS WORK IN COMPLIANCE WITH THE GUIDELINES OF THAT PROGRAM.
- EXECUTION OF INSTALLATION AND ERECTION OF FABRICATED SPOOLS AND CLEARING OF TEST PACKAGES FOR TESTING AT SITE.
- PRELIMINARY WELDING INSPECTION ACTIVITIES (FIT UP, ROOT PASS, INTERMEDIATE, AND HOT PASS)

SITE HANDLED :
1) Client : Gail India LTD.
Project Description : Laying of U/G Cross Country Pipeline and Piping.
Project Name : 10’’Dia API 5L X42 grade × 3.968 km Ponnamanda to Kadali P/L at
Andhra Pradesh.

2) Client : ONGC Ltd, Cauvery Asset
Project Description : Laying of U/G Cross Country Pipeline.
Project Name : 4’’Dia API 5L X42 grade × 7.10 km KPDP to KMP EPS P/L at
Thiruvarur.

3) Client : ONGC Ltd, Cauvery Asset
Project Description : Laying of U/G Cross Country Pipeline.
Project Name : 4’’Dia API 5L X42 grade × 15 km KADQ to KUT GCS P/L at
Mailadudurai.

4) Client : CPCL, Panangudi
Project Description : Repair and Maintenance of Naptha & Diesel Storage Tank
Tank Detail : 18 mtr Dia x 12 mtr Height, 2500 Cu Mtr

Personal Information :
Father Name : C.Varadharajan
Date of Birth : 27 May 1986
Nationality : Indian
Marital Status : Unmarried
Language Proficiency : Tamil, English, Telugu

I HEREBY DECLARE THAT ALL THE ABOVE PARTICULARS GIVEN BY ME ARE TRUE AND CORRECT TO THE BEST OF MY KNOWLEDGE.

(V.VIJAYARAJAN)

[Unregistered]

I AM WORKING AS AQC INSPECTOR IN THE FIELD OF REFINERY AND POWER PLANT CONSTRUCTION PIPING. I WANT TO WORK IN THE AREA OF SOUTH INDIA. IF YOU HAVE ANY OFFER PLEASE INFORM ME.

[Unregistered]

BE Mechanical Engineer