www.capgemini.com Bangalore : Aircraft Maintenance Engineer MPD

[mskavi]

Capgemini Bengaluru/Bangalore : Aircraft Maintenance Engineers -MPD

Website: http://www.capgemini.com

Keywords: Aircraft Maintenance Engineers,MPD,MRB process,aircraft certification process,SB incorporation,maintenance planning,Job card creation

Designation: Aircraft Maintenance Engineers -MPD
Experience: 2 - 7 Years
Location: Bengaluru/Bangalore
Compensation:
Rupees 2,00,000 - 7,00,000
Education:
UG - Any Graduate - Any Specialization,Graduation Not Required
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: IT-Software/ Software Services
Functional Area: Application Programming, Maintenance
Posted Date: 25 Feb

Job Description:
Experience
1 Minimum 2-4 years experience in airlines, maintenance of aircraft
2 Knowledge of Maintenance Planning Document(MPD)
3 Knowledge of MRB process
4 DGCA Paper I, Paper II & _paper III
5 Knowledge of aircraft certification process
6 AirPl@n & AirN@v database usage
7 Knowledge of maintenance planning & Job card creation
8 Knowledge of SB incorporation

Job Location : Bangalore

If you fit the bill, send across your profile in Word format along with contact details
Current CTC:
Expected CTC:
Notice Period:

Kindly send resumes of interested candidates on ruby.goel@capgemini.com

Desired Candidate Profile:
Qualification BE (Mechanical, Electrical, Aeronautics, Electronic & Communication)
Aircraft Maintenance Engineering (AME)

Company Profile:
Capgemini is one of the top 5 consulting companies in the world. With a global strength of 65,000 professionals and operations in more than 34 countries, we are preferred employer of IT talent across. Our Indian operations encompass high ended solutions architecture and deployment from state of the art infrastructures located in Mumbai, Kolkatta and Bangalore. Our 5000+ employees in India, make us the Jewel in the Capgemini Crown.

Read Capgemini Blog

Executive Name: Ruby Goel

Address:
Not Mentioned

Telephone: 6656700-8058189

Keywords: Aircraft Maintenance Engineers,MPD,MRB process,aircraft certification process,SB incorporation,maintenance planning,Job card creation

[Monika19]

Dear Sir,

I wish to work in your esteemed organisation.

Please find my CV & o the needfu.

Rgds,
Monika

[avilashk]

Dear Concern,

My profile is completely matched with your requirement. I would like to work with your esteemed orgnisation.

please consider the same.

Regards,
AVi

[sanjairc]

Job Application
Sanjai Ravandur Chikkaveerappa,
139, Gangamma Circle,
Kalathur Layout,
Bangalore 560013,
+91-997-218-9779.
Dear Sir/Madam,
I am writing to introduce myself to you as a Research Assistant in Indian Institute, Bangalore. I'm responding to your advertisement over internet for want of a Mechanical Engineer.
As you can see in the enclosed resume, I have a very strong two year experience in the field of Non-Destructive Testing, Mechanical Testing and Composite fabrication. I have good hands on packages like Matlab, AutoCAD, Unigraphix and Ansys. I have also been working on X-Rays from past two years. I have used VIDISCO FoX Rayzor X-Ray system.
I am looking out for new opportunities in the same or related field. I believe that I could make a significant and valuable contribution in your firm.
Thanks for your time and consideration.

Sincerely,
Sanjai R C.
Research Assistant,
Indian Institute of Science,
Bangalore
Enclosures:
Resume

[srinu.buridi]

Respected sir,.....

i have total of 5 years and 4 months aeronautical experience and cleared DGCA
paper i, ii, iii(L.A, C.P, H.A &J.E) . I also have the QC cell work
experience and technical experience including carry out major schedule
and handling of store. if u give an opportunities i will perform the given duties
with honor and at any level not jeopardizing the trust of the company
and learning wisdom and improving my skills with making myself known
and representing organization.

i here by sending my resume for your kind attention

[shanmugamkathiresan]

I would like to work for the capgemini aviation sector and I assure I will give my best effort
for the company

[Guest Poster]

15 Yrears navy and aircraft ground run qualification experience in AME instruction, ground handling at AIRINDIA SATS, contact 9845330762

[Guest]

SIR MY NAME IS ANOOP MP,I HAVE COMPLETED AIRCRAFT MAINTENANCE ENGINEERING

[Guest]

Curriculum Vitae
GARIMA KUMARI E-mail :
garima.ame AT gmail.com
CAREER OBJECTIVE
To carve a niche for myself as a professional in Aviation Industry in the area of Maintenance and Repair and contribute my learning & work as a team player for the success of the organization.
PROFESSIONAL PROFILE
A dynamic professional having a great flair for learning and believes in creating value for the organisation associated with a team player to the core having a track record of producing quality work within the time frame.

WORKING EXPERIENCE
TOTAL AERONAUTICAL EXPERIENCE :
- 5 years and 06 months till date.
Two & half years Aircraft Maintenance Engineering course (Category- A & C from July 2005 to Dec 2008) for ICAO TYPE II licence as approved by DGCA, Government of India from Hindustan Institute of Aeronautics, Bhopal excluding OJT.
- Four months OJT from MESCO AIRLINES LTD Mumbai. (From Jan. 2008 to Apr
2008)
- One Year practical work experience in Indira Gandhi Rashtriya Udan
Academy, Raebareli (from May 2008 to Nov 2008 then Jan 2009 to June 2009) on :
i. Beech craft King Air C-90A aircraft fitted with Pratt & Whitney PT6A-21
Engines.
ii. Zlin 242L & Trinidad TB-20 aircrafts fitted with Avco Lycoming piston
Engines.
- Six Months teaching experience as a instructor in Hindustan Academy of AME, Lucknow from Jan 2010 to July 2010 & nine months teaching experience as a instructor in NDC Institute of AME, Vadodara.
- Presently working as a Deputy Chief instructor (Mechanical) in NDC Institute of AME, Vadodara (GUJ.)
ACADEMIC CREDENTIALS
1. Undergone Approved AME course from Hindustan Institute of
Aeronautics, Bhopal from July 2005 to June 2008.
2. XII from C.B.S.E in 2005 with 72%.
3. X from C.B.S.E IN 2003 with 75%.
4. Persuing B.sc honours Physics.
D.G.C.A PARTICULARS
1. Paper 1 (A/C RULES AND REGULATIONS) in Feb. 2008.
2. Paper 2 (AIRCRAFT GENERAL ENGG. & MAINTENANCE PRACTICES) in
June 2008.
3. Paper 3 (TURBINE ENGINE) in June 2008.
4. Paper 3 (LIGHT AEROPLANE) in June 2009.
5. Paper 3 (PISTON ENGINE) in June 2009.
6. BAMEL Issued in Jet Engine. (No : 12984)
SKILLS
1. Like to accept new challenges.
2. Open for the criticism to improve my self.
3. Self-Motivated, a quick-learner and team player
4. Easily gets adapted to work places.

[Guest]

CURRICULUM VITAE
ANKIT SHARMA
E-mail – ankit_12v AT yahoo.com
Objective :- Intend to build a career with leading organizations with committed and dedicated peoples, which will help me explore myself fully and realize my potentials. Willing to work as a key player in challenging and creative environment.
Experience :- Total Aviation Experience
09 years & 02 months.
From 17 Sept. 2005 to 16 July 2009 :
Worked in Mesco Airlines as a Junior Technician.
From 21 July2009 to Till Date.
Presently working in Pawanhans Helicopters limited,
New delhi, as a Junior Technician.
Working Experience
- Associated with MI-172 Helicopter fitted with TV3-117VM engine.
- Associated with ECUREUIL Helicopter fitted with ARRIEL 1B
Engine.
- Associated with P-68 Observer fitted with Lycoming IO-360A1B6
Engine.
- Associated with ALH Dhruva Helicopter fitted with TM333 2B2
Engine.
- Associated with Bell 407 Helicopter fitted with 250C47M Engine.
Education :- (Session 2002 – 2005)
Successfully completed AME License Training in Mechanical Stream from Indian Institute of Aeronautical Science, Kolkata.
Technical
Qualification :- Technical Qualification

- PAPER 1 (A/C Rules & Regulations).
- PAPER 2 (General Engineering & Maintenance Practices).
- Successfully completed ALH DHRUVA Familiarization Course From HAL Bangalore.

Educational Qualification
- Passed (10 +2) in 2001 from CBSE Board.
- Passed 10th in 1999 from CBSE Board.

[Guest]

RESUME
RAVI SHANKAR V
Mail Id : ravi44sun AT yahoo.in
Results-oriented individual seeking a full-time position as an Aeronautical Engineer in the areas of Design, Maintenance, and in related areas inside a competitive environment where I am allowed to use my skills to best serve the needs of the company.
Course Period
Institution
Board / University
Aggregate
B.E (Aeronautical) 2008-2012 J.J College Of Engineering & Tech, Trichy Anna University CGPA
6.8
XII 2007-2008 Maharishi Vidya Mandir, Hosur. State board 75.58%
X 2005-2006 Sri Vijay Vidyalaya, Hosur. Matriculation 84.45%
- AUTOCAD 10
- CATIA V5
- ANSYS
- PGDCA
- Operating Systems : Windows XP.
- Packages : MS office 2000, 2003, 2007.
- Trustworthy, Flexible and Positive attitude.
- Adaptive and Great Listener
- Responsible
- Industrial Visit to Indian Naval Air Station at Arakkonam.
- Participated in the event “One day Workshop on Ornithopter”, a part of National Level Aviation Awareness held at Park college of Engineering & Technology, Coimbatore
- Participated in the two day National Level Workshop on ‘Trends and Developments in Aeronautics and Avionics’ held at Adhiyamaan College of Engineering, Hosur
- Industrial visit to Tanjore Air Force.
Title : Design and Fabrication of Active AeroElastic Wing.
Team Size : 3
Description : The project focuses on increasing the Turn Angles and also for easy Manuvering using Aero Elastic Wing. This is applied in X-56. This can be used during war times mainly for Dog fights.

Declaration
I hereby declare that the above-furnished details are true and fair to the best of my knowledge. I assure you that, if I given an opportunity, I shall perform duties to the best of my ability in all possible ways to satisfy the organization as a whole.
Date : 12/05/2012
Place : Hosur (V.RAVI SHANKAR)

[Guest]

I would like to know organisation's email id if possible asap..please..help me out..
Thanx..

[Kalhapure]

I am retired but want to share the experience as an employee or otherwise.
KALHAPURE C B
(37+ years of cross industry experience with graduation in mechanical engineering from Indian Air Force)
Overall of 37+years of cross industry experience in which 21 years of extensive experience in Aircraft Maintenance and Repair in Indian Air force and 16 years of experience in Production planning, Plastic Engineering, quality assurance and contract manufacturing from vendors.
PROFESSIONAL QUALIFICATION :
- Degree in Mechanical Engineering
- Acquired India Certificate Examination, National Productivity Council,
- Graduation from the Indian Air Force 45th Production and Repair Technical Course (1986) Ministry of Defense USSR.
- Acquired training in Germany for production and maintenance of BIHLER make automatic high speed, CNC controlled punching and forming machine.
PROFESSIONAL SUMMARY AND EXPERTISE :
- Over 21 year’s of hands on experience in Aircraft maintenance and repair ,of Packet, MIG-21 T-77& 66, MIG-23 MF & UB, Rotables servicing, Overhauling MIG 23, MCF and Type training. Planning and co-ordination. Got discharged from Air force as Warrant Officer.
- Extensive experience in Production planning, Plastic Engineering, Quality assurance, Contract manufacturing from vendors.
- Product range handled includes, LT Switchgear and component manufacturing.
- Played significant role in installation and commissioning of machines (new plant).
- Manpower planning and deployment.
- Experience in new technique of thermo set. Vacuum injection molding and auto-de gating.
NOTABLE ACHIVEMENTS :
- Commendation by THE CHIEF OF THE AIR STAFF, INDIAN AIR FORCE (1992)
- Cost reduction in production and maintenance.
- Automation in the hydraulic presses by installing process logic control (PLC).
- Optimum utilization of manpower, machine and material.
- Imparting Continuous training activities (in-house).
- ISO and EMS implementation.
PROFESSIONAL EXPERIENCE :
1. Company : Larson and Toubro Ltd., Ahmednagar, Maharashtra
Position : Manager Production
Duration : March 2006 – 01 Jul 2011 (Retired)
Job Responsibilities :
- Production Planning, Installation and commissioning the projects.
- Manpower management - scheduling and monitoring.
- Maintenance activities related to machines
- Reporting to Management.
2. Company : Datar Switchgear Ltd., Nashik, Maharashtra
Position : Manager, Production
Duration : April 1996 – Feb. 2006
Job Responsibilities
Present employment with public limited switchgear manufacturers since April1996 to date. An ISO 9001 company is leading manufacturer of switchgear, Static Energy meters, Energy management system and Relays in India. Job involved direct reporting to Executive Director.
- Job responsibilities - Heading complete molding and component manufacturing department with 55 workers, 4 shift supervisors and 3 maintenance engineers.
- Monitoring movement of raw material, work in progress components and finished stock.
- Freezing specification of appropriate material and bench marking of quality limits.
- Determining of strategy in consultation with centralized production planning team for purchase of critical components.
- Keep abreast of market trends and technology changes, so as to analyze input of new product development in co-ordination with R&D engineering team.
3. Company : Al plast Engineering India Pvt. Ltd., Nashik, Maharashtra
Position : Manager, Production
Duration : April 1994 – March 1996
Job Responsibilities :
- Was employed in one of the plastic processing, Aluminum pressure die casting engineering private limited organization at Nashik as Manager Production and maintenance.
4. Indian Air force,
Position : Warrant Officer
Duration : April 1973 – Feb. 1994

Job Responsibilities :
Served Indian Air force, Mechanical engineering Aircraft Maintenance and discharged as Warrant officer on fulfilling the initial engagement conditions.
- Aircraft maintenance, Hydraulics, Pneumatics, Fuel system.
- Airframe structure.
- Metallurgy, NDT methods of crack detection.
- Quality assurance.
- Planning co-ordination and deployment of man power.
- Safety and security of man, material and information
- Trade proficiency Certificate attached for details.

DATE : JUL 2012 SIGNATURE
( C. B. KALHAPURE )