SAFRAN Aerospace India Pvt Ltd Bangalore : Front Office Executive

[mskavi]

SAFRAN Aerospace India Bengaluru/Bangalore : Front Office Executive- for immediate joining

Designation: Front Office Executive- for immediate joining
Experience: 0 - 1 Years
Location: Bengaluru/Bangalore

Job Description:
Knowledge on handling EPBAX system for transferring calls to the concerned departments.
Responsible for Handling Calls, Guiding Visitors, Coordination with various Departments for Admin work like Courier, Bills, and Payments etc, Should have exprience in admin related acrivities, with good communication skills.

Expreince: 0 to 1 yrs
Qualification : Any Graduate

Desired Candidate Profile:
Knowledge on handling EPBAX system for transferring calls to the concerned departments.
Responsible for Handling Calls, Guiding Visitors, Coordination with various Departments for Admin work like Courier, Bills, and Payments etc, Should have exprience in admin related acrivities, with good communication skills.

Expreince: 1 to 2 yrs
Qualification : Any Graduate

Company Profile:
Safran is an international hi-technology group with four core businesses: Aerospace propulsion, Defense and Security, Aerospace equipment and Communications. The group has workforce of 62,000 spread over approximately a hundred sites worldwide.

Address:
SAFRAN Aerospace India
CSRIE, No 32
Grape Gardens, 17th H Main Road
6th Block Koramangala
Bangalore,Karnataka,INDIA 560095

Email Address: recruitment@safran.in
Website: http://www.safran-aerospace-india.com

Keywords: Front office , admin

[Guest]

TRIPORNA GHOSH

157-A, Swin-Hoe Lane,
Kolkata-700042.
Mobile: +91- 9903890129
E-mail ID:- tripornaghosh AT gmail.com


OBJECTIVE
- Want to work in professional manner and grow with my work.
- To keep learning and performing, so as to share my knowledge and skills with the further growth of the organization of esteem.


ACADEMIC QUALIFICATION
- Secondary Examination (X) passed in year 2004 from W.B.B.S.E. (West Bengal Board of Secondary Education).
- Higher Secondary Examination (XII) passed in year 2006 from W.B.B.H.S.E (West Bengal Board of Higher Secondary Education) with Science Stream.

TECHNICAL QUALIFICATION
- Three Year Technical Training Course approved by Director General of Civil Aviation, Govt. of India in Aircraft Maintenance Engineering from Aircraft Maintenance & Engineering Institute (W.B, Barasat).
- Training conducted in Avionics Stream, commenced w.e.f. July 2006. Having Experience in RADIO NAVIGATION, ELECTRICAL SYSTEM, and INSTRUMENT SYSTEM Maintenance.
- DGCA, Computer Number E-06033257.

- Paper-1 rules n regulation passed
- Paper-2 general engineering passed
- Paper-3 radio navigation (r.n) will appear on October’10 session

WORKING EXPERIENCE
- Six Months Practical Experience in RADIO NAVIGATION from AIRCRAFT MAINTENANCE TELECOM AGENCY (ATMA), Kolkata, approved under CAR 145 part C3 for Maintenance including Overhaul, FTD, Testing of Airborne Radio Communication & Navigation Equipments fitted on aircraft upto 5700 kg AUW.

- During this period I have assisted in carrying out:-
- FTD schedule inspection on VHF Nav./Com. RT- 385A, RT- 485B, KX-155, KX-155A.
- Non Radiation Load (NRL) test on ELT DM- 6, DM- 8.1, NARCO-10, C-406-2, E-01, 3000-10, DM-6.1, and ARTEX-C406V.
- Bench Check schedule inspection on ADF Rxr. R-546E.
- Bench Check schedule inspection on VHF Txr. / Rxr. RT-385A.
- FTD schedule inspection on HF Controller KCU-951.
- Six Months Practical Experience in ELECTRICAL & INSTRUMENT SYSTEMS from INSTRUMENTS AVION, Kolkata, approved under CAR 145 part C5 & C13 for Overhaul, Repair, Inspection, Modification and Certification of Electrical Equipments and Electrical & Mechanical Instruments fitted on aircraft upto 5700 kg AUW.
- During this period I have assisted in carrying out:-
- 500hr. inspection, Overhaul & Testing of Magneto, D.C Generator, Alternator, Voltage Regulator, Starter Generator.
- Initial Inspection, Charge, Capacity Test, Deep Cycle, Cleaning & Re-Assembly of Ni-Cd Battery.
- Initial Charge, 24hr. Inspection, Capacity Test, Re-Charge of Pb-Acid Battery.
- Inspection, Friction Check, Deviation Compensation of DR Compass.
- Overhaul, Inspection, Reassembly, Cabin Climb, Calibration & Leak Test of V.S.I.
- Overhaul & Scorsby Test of Artificial Horizon.
- Overhaul & Calibration of T.S.I.
- Rotor Freedom Check of Directional Gyro.
- Disassembly, Inspection, Cleaning of Pivot Pointer Dial, Check for damage, Reassembly & Calibration of Altimeter.
- Bench Check of Air Speed Indicator (scale: 10-200 knots).
- Calibration & Inspection of Vacuum Gauge, Pressure Gauge, D.T.I, Safety Gauge (N2), Oxygen Pressure Gauge, R.P.M Indicator, TGT Gauge, CHT Gauge.

SKILLS & STRENGTHS

- Determined.
- Hard working.
- Like to work in a team.
- Self motivated.
- Basic knowledge of M.S. Office, PowerPoint, M.S.Excel.

PERSONAL DETAILS
- Father’s name - Mr. Tapas Kumar Ghosh.
- Date of birth - 25 July, 1988.
- Languages known - Hindi, English & Bengali.
- Marital status - Single.
- Nationality - Indian.
- Hobbies - Reading, Traveling, Music & Dance.

I hereby declare that above mentioned information are true to my best knowledge & belief.

Triporna Ghosh.

[Guest]

CURRICULUM VITAE
VIBHA BAGGA
Email address :vibha2210 AT gmail.com
Objective :
Intend to build a career with leading corporate of hi-tech environment with committed & dedicated people, which will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging and creative environment.
Professional Qualifications :
(1) Completed 3 years Aircraft Maintenance Engineering Course from Hindustan Academy of Aircraft Maintenance Engineers, Lucknow [Uttar Pradesh].
(2) Passed Paper 1 of DGCA Licence Course.
(3) Passed Paper2 of DGCA Licence Course.
(4) Passed Paper 3(I.S) of DGCA Licence Course.
(5) Passed Paper 3(E.S) of DGCA Licence Course.
(6) Passed Paper 3(R.N)of DGCA Licence Course.
Academic Qualifications :
XII I.S.C Board 84.2%
X IC.S.E Board 84.6%

Total Aviation Experience :
From JULY 2008 to JULY 2009,
SEPT 2009 to DEC 2009.
Details of Working Experience :
- 1). Worked with MESCO AIRLINES as a Trainee Technician on MI-172 and Eucurueil AS-350 BA Helicopters with experience of 1 year.
Practically trained in routine maintenance, snag rectification and component replacement during this period.
- 2) Worked with GO AIRWAYS on AIRBUS A-320-200 fitted with CFM56-5B and IAE-V2527.

[harshadt]

RESUME
Name HARSHA D T
Email – harshadt88 AT yahoo.com/harshadt88 AT gmail.com
Objective I am looking forward for an opportunity to be part of reputed organization to utilize my knowledge, skills and contribute in the growth and development of the organization.
Educational Qualification
DEGREE :
Completed Bachelor of Engineering in the stream of Mechanical Engineering , At June 2010 from Bapuji Institute of Engineering & Technology, Davangere, affiliated to V.T.U.(Belgaum)
PRE-DEGREE :
Examination
Passed Board Institution attended Year of
passing %of marks obtained
BE V.T.U Bapuji Institute of Engineering & Technology, Davangere. 2010 54.80%
PUC Karnataka
Board Government P U college
Mysore. 2006 49.50%
SSLC State Board Shri Basavesvara High School,
Banur. 2004 77.60%
Skill Set
CATIA V5
project
Title : DESIGN AND FEBRICATION OF SOLAR POWERED ROVER
The project deals with surveillance purpose. It is based on mechatronics principle. Solar powered rover is an unmanned,autonomous,remote operated vehicle used for space exploration defence,wildlife,forests and general purposes.
It’s a prototype model designed using mechanical parts such dc gearhead motors for movement of vehicle,monocrystalline solar panel as power source and electronic components such as diodes,thyristors,resistors,capacitors etc.The main concept of the project is to make use of renewable sources and make use of solar energy to run these type of robotic vehicles. Use of this robotic vehicles in various hazardous places, where man cannot work or travel.

Extra
Co-curricular
Participated in cultural programs held in college.
Positives Traits Can bond well with people
Good team player
Hard worker
Performance oriented person
Good time management
Leadership
Friendly nature.
Hobbies Playing Cricket,
Watching movies, listening to songs, reading news papers.

[Guest]

I am Btech in aeronautical engineering working in GRIHA SOFTWARES .I here by apply for a job in your company.

[Guest]

Resume
PANKAJA B N

E-mail : pankaja.pkj AT rediffmail.com

CARRIER OBJECTIVE
Pay a vital role in progress of the company goals and try to give hundred percent performance in work.
EDUCATIONAL BACKGROUND
Diploma(Commercial practice)
Sandur polytechnic, Yeshwantnagar-583124
Bellary(dist), Karnataka
ACADEMIC ACHIEVEMENTS
Diploma in commercial practice :59%
SSLC (secondary education) :50%
COMPUTER KNOWLEDGE
Operating system :DOS, Windows XP
Office suit :M.S Office, tally, Visual basic, M.S Word, Internet
Exposer to Autocad, HTML, and other knowledge.
Other Knowledge : Senior Grade in Short hand and Typing.
WORK EXPERIENCE
- Worked as personnel secretary toAVP in JSW Steel ltd Torangallu for 2years.
- Working as a Secretary in Alpha Design Technology,Banglore.

` NATURE OF WORK
- To look after all aspects of correspondence of the office like drafting of letters, preparation of project report, sending/receiving fax, operation of internet and services, attending telephone calls etc.
- Handling and sorting all inward and outward mails and regular filing of correspondence / documents, systematic maintenance of files and all other routine work.
- Manage and carry out all administration and Secretarial work for smooth function of Department.
- Any other task assigned by the Management.
DECLARATION
I hereby declare that, the above information furnished by me is true and correct to the best of my knowledge and belief.
Yours truly,
( Pankaja B.N)

[Guest]

ROSHAN.P
E-mail ID : roshan4230 AT gmail.com
Career Objective
Seeking a career oriented position in a challenging environment of an organization, working for stability, growth and advancement of the organization by utilizing my academic qualification and project experience in Analysis.
Academic Profile
Bachelor of Engineering in Mechanical from Visweswaraiah Technological University, Belgaum, in 2012.
Course name Name of the Institution Percentage of marks and class
B.E. Mechanical S.T.J. Institute of Technology, RNR 62%
[First class]
P.U.C (12th)
Shivaji College, Karwar 64%
[First class]
SSLC
ST. Joseph’s School, Karwar 71%
[First class]
Technical Skills
- Hypermesh
- Ansys (using commands)
[Certification in Hypermesh at RVE Training center, Banglore].

Strength and Skill set

- Self-Belief, dedication and hard working, urge to learn more.
- Good communication, team oriented, flexible and efficient.
- Ability to lead and motivate team members to achieve the desired results.
- Ability to pick up new techniques and subjects fast and with minimum guidance.
Computer Proficiency
- Platforms : Windows Xp, Win 7.
- Basic hardware and software knowledge.
Academic Project
Analysis of Main Landing Gears :
In this study of finite element analysis, we have dynamically simulated various operations of Main Landing Gears.
- Aircraft chosen : Boeing 737.
- Software used : Hypermesh (as a pre-processor) and Ansys (as a solver).
- Analyses : 1. Static analysis.
2. Dynamic Analysis.

3. Modal Analysis.
- Landing Gear Material : Titanium and High Strength Steel.
- Preprocessing : 1. Geometry Modifications.
2. Components Meshing.
3. Setting the attributes (Materials, Real constants).
4. Modifications : Merging and Couplings of nodes,
Creating Restraint,
Springs to Struts, etc.
5. Boundary conditions : Load Displacement.
- Processing : Solving.
- Post-processing : 1. Plotting displacements (Vertical, Axial, Lateral, etc.)
2. Stress displacements.
3. Various Simulations.
Declaration
I hereby declare that, all the above mentioned information is true and correct to the best of my knowledge.

Date : 06-07-2012
Place : Bangalore (Roshan P)