Piping Stress Mumbai : Mott MacDonald Consultants India Pvt Ltd

[Admin]

Mott MacDonald Consultants (India) Pvt.Ltd. Mumbai : Chief Engineer - Piping Stress

Website: http://www.mottmac.com

Keywords: Strees

Designation: Chief Engineer - Piping Stress
Experience: 9 - 14 Years
Location: Mumbai
Education:
UG - B.Tech/B.E. - Chemical, Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 25 Feb

Job Description:
Helps managing the discipline for safe, operable and economic designs
ranging conceptual, front-end, detailed design & close-out
Ensures the designs meet the quality and agreed project requirements
Performs as Lead Engineer and executes project design works.

Desired Candidate Profile:
Executes the engineering & design works within budget and schedule
Co-ordinates with other disciplines & resolves the engineering issues
Provides engineering inputs during all design phases including interpretation and challenge of standards
Actively communicates with other disciplines to optimise areas of interface, during the design development, review and check processes
Ensures design packages meet the relevant safety, environmental & ergonomic standards
Discusses with support engineers and designers regularly on scope, man-hours, resources and schedule etc
Prepares material requisitions, evaluate technical bids & reviews Vendor / third party documents
Participates in the Technical reviews and progress review of projects
Familiar with the Company procedures and international standards & codes.

Company Profile:
Mott MacDonald - India, part of a world wide Mott MacDonald Group, is a leading management and engineering consultancy service provider to the industry, infrastructure and social sectors.
Our Industry and Buildings division provides engineering services to projects from concept to commissioning viz. process, front-end, basic and detailed engineering, procurement assistance, contract management, inspection, construction and overall project management to a wide spectrum of industries such as Chemicals, Petrochemicals, Oil and Gas, Man-made Fibres, Pharmaceuticals Life sciences, Agro etc. and to a range of Buildings.

Executive Name: Alvis Fernandes

Address:
Not Mentioned

Telephone: 022-30835000

Keywords: Stress

[vs.prince]

V.S.PRINCE
Pipe Stress Engineer
OBJECTIVE:
To absorb all qualities of good professional with my technical thoughts contribute towards organization.

PROFESSIONAL PROFILE:Six (6 ½) years experience in the Piping Design and Pipe stress analysis for EPC companies.CLIENT EXPERIENCE: M/s Waha Oil Company (Libiya)M/s Petroleum Development of Oman (Oman) M/s Kuwait Oil Company (Kuwait)

CURRENT AND PREVIOUS EMPLOYMENT:
- Worley Parson Engineering L.L.C., Oman 2008 - 2009
- Heavy Engineering Industries and Shipbuilding Company, Kuwait 2005 - 2008- Millicon Consultant India pvt. Limited, India 2005 - 2005
- Camy Engineering Limited, India 2002 – 2004

EXPERIENCE SUMMARY:
- Stress analysis Static & Dynamic (Slug flow) using CAESAR-II version 5.0 & 5.1
- Identifying the Stress critical lines from the P&ID and line list as per the Stress Specification.
- Preparing the Stress Critical Line list.
- Preparing the Nozzle Loads calculations.
- Preparing the Flange Leakage calculations.
- Preparing the Pressure Relief valve Reaction force calculations.
- Preparing the Wind Load calculations.
- Preparing the Vibration analysis.
- Preparing the Buried pipe analysis.
- Preparing the Stress Analysis Design Basis.
- Submitting Stress Analysis Reports to the Client and getting their approval.
- Preparation of Support Load Data and passing the same to Civil.
- Pipe support calculations.
- Co-ordination with the other Engineering Departments.

CAREER HISTORY:
1. Piping Engineer, June 2008 to 2009 @ Worley Parsons Engineering L.L.C., OmanList of Projects Involved
(i) Currently working on the Faregh field development phase-II gas processing facilities for WAHA OIL COMPANY, Libiya.
Responsibilities Include:
- Stress analysis performed for Reciprocating Compressor suction lines for 6" and Discharge lines for 4" in accordance with the requirements of ASME B31.3 and Allowable nozzle load as per Equipment Manufacturer Allowable loads.
- Stress analysis performed for Centrifugal Compressor suction lines for 14" and Discharge lines for 8" in accordance with the requirements of ASME B31.3 and Allowable nozzle load as per API 617 and Equipment Manufacturer Allowable loads.
- Stress analysis performed for Air cooler Heat Exchanger suction lines for 10" and 6" in accordance with the requirements of ASME B31.3 and Allowable nozzle load as per NEMA SM 23 and API 661 and Equipment Manufacturer Allowable loads.
- Stress analysis performed for 8" Buried Pipe Line at 140Km length for gas piping in accordance with the requirements of ASME B31.8 and found the Anchor block force.
- Pressure Relief valve reaction force calculation and 24", 20" and 12" Flare line analysis as per ASME B 31.3.
- Stress analysis performed for Hot production Well head Pipe for 4" with Ball joint Scissor arrangement in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 4" to 24" Lines at 10m height pipe rack for gas and oil process piping in accordance with the requirements of ASME B31.3.
- Static Equipment Allowable Nozzle load analysis as per Pressure vessels.
- Vibration Effect analysis.
- Dynamic analysis (Slug flow analysis) performed for 6" Line in accordance with the requirements of ASME B31.3.

2. Piping Design Engineer, August 2005 to May 2008 @ Karafi National - Heavy Engineering Industries & Shipping Company, Kuwait.
List of Projects Involved
(i) GC-27, New desalter and light crude drain modifications and GC-27 capacity expansion for effluent water separation,
transfer and minagish injection plant upgrade. Kuwait. Client: Kuwait Oil Company, Kuwait. Consultant: SNC-Lavalin, UK
Responsibilities Include :
- Stress analysis performed for 48
- Flare Line Piping in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 20
- Oily water Transfer pump Suction and Discharge Line Piping in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 24
- Line of Effluent water system with Buried GRE Piping in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 16” and 18” Lines of Oily water system with Buried GRE Piping in accordance with the requirements of ASME B31.3
- Ascertain stresses of GRE piping system are within the allowable per B31.3.
- Determine the restraint loadings at pipe supports and tie-in point.
(ii) Modification of Tank Vapor system, crude tank filling pipe works & Reconstruction of Tanks at Gathering Centers 2, 3, 9, 11 and Modification of Boot Risers at 14 GC's, (South & East Kuwait)Client: Kuwait Oil Company, Kuwait Consultant: AMEC plc, London, U.K.
Responsibilities Include :
- Stress analysis performed for 6",8",10" Lines at 15m height for Boot riser modifications for Wet crude oil tank and Dual crude (wet and dry) oil tanks in accordance with the requirements of ASME B31.3.
- Stress analysis performed for 16",20",30" and 36" Lines of Crude oil inlet, Crude oil outlet piping for Dual and Dry crude oil tanks in accordance with the requirements of ASME B31.3
- Stress analysis performed for 36" Flare line for Dual crude oil tank and Dry crude oil tanks in accordance with the requirements of ASME B31.3.
- Review location of piping supports as per stress calculation and recommend possible location to accommodate other piping layout attaining minimal pipe spacing especially on pipe-rack.
- Review IFC drawings to ensure that correct information is transmitted.
(iii) Heaters & Boilers safety up gradation and Emission control project, Kuwait National Petroleum Corporation - Shuaiba Refinery, Kuwait.Client : Kuwait National Petroleum Corporation, Kuwait.Contractor: Engineers India Ltd., India & HEISCO.
Responsibilities Include :
- Stress analysis performed for 6" turbine exhaust line and 4" turbine inlet line in accordance with the requirements of ASME B31.3 with Equipment Manufacturer Allowable Nozzle loads.
(iv) Heavy fuel oil pipe line from Mina Al-Ahamadi Refinery to Doha west power station, Kuwait. (120 km)Client: Ministry of Energy-Electricity and Water, Government of state of Kuwait, Kuwait.Consultant: Kuwait Oil Company, Kuwait. Responsibilities Include :
- Preparation of Wall thickness calculations for 20
pipelines as per B31.4.
- Stress analysis performed for 20",10" and 8" Lines of on-plot piping (MAA Refinery, TL3-Cross over, Doha west power station) in accordance with the requirements of ASME B31.3 and B31.4.

2. Piping Engineer, January 2005 to July 2005 @ Millicon Consultant Pvt. Ltd, India
(i) Modification of pipe works, Clariant Chemical Ltd., INDIA
Responsibilities Include :
- Develop and check system design drawings in conformance with project specifications, design parameters, codes and industry practices.
- Review project specification, design instruction, plot plan, flow diagrams, line list and supplier's information.
- Performed piping layout drawings and isometrics. Check, back-check and correct plan drawings and isometrics. Update master flow diagrams and equipment location plan. Support construction in drawing and specification interpretations and design modifications.
- Preparation of the pipe thickness calculation.

3. Asst. Mechanical Engineer, January 2002 to November 2004 @ Camy Engineering Pvt. Ltd, India.
- Checking the piping drawings and specifications in conformance with codes, design parameters and industry practices.

ACADEMIC QUALIFICATION: BE in Mechanical Engineering C.S.I. Institute of Technology Tamilnadu, India.
Diploma in Mechanical Engineering Morning Star polytechnic Tamilnadu, India.
Piping Engineering, Indian Institute of Technology Mumbai, India.

COMPUTER SKILLS: Expert User of Caesar II software both Static and Dynamic (Slug flow analysis)
- Good Knowledge of Microsoft Excel

PERSONNEL INFORMATION:
Date of Birth : 15 March 1979
Nationality : Indian
Passport No. : E 4986125,
Validity: 16.03.2013.
Permanent Address : 1100, Sahaya illam,
Aruguvilai, Nagercoil,
Kanyakumari Dist, Tamilnadu, India.
PIN-629001
+ 91-4652 272458
Mobile no. : + 91-9629777825
E-mail : ervsprince1979@yahoo.com vsp_ani@rediffmail.com

Thanks and Regards,

V.S.PRINCE

[Guest]

CURRICULUM VITAE
SHAIK OMER MIYA
E-mail : shaikomer65 AT gmail.com
Career Goal : To make a strong and influential career in an esteemed organization where I can develop and contribute my personal and professional skills.
EDUCATIONAL QUALIFICATION
1) Bachelor of Technology (Mechaniccal Engg.), with first class ,from Royal College of Engineering & Technology (Affiliated to JNTU Hyderabad,A.P),
Chevella, A.P, (2007-2011).
2) Intermediate, from Sri Chaitanya Junior College(Affiliated to Board of Intermediate Education,A.P),Santhosh nagar,Hyderabad.(2006-07)
3) S.S.C from St Mary’s High School(Board of Secondary Education,A.P), Kanchanbagh,Hyderabad,(2004-05)
I.T. skills :
High level knowledge in software like MS office, C language
Live Projects :
Design and Analysis of Roller Of Lime Briquetting Machine.
Certificates
- 2D and 3D modeling using Autocad
- Certified Pipe engineer
Strengths
- Sincere, committed and has a strong zeal to succeed.
- Good Communication skills.
- Adaptable to any working environment and quick learner.
- Decision making ability