PRM Travels Singapore : Aeronautical Engineer, CABIN TECHNICIAN

[mskavi]

PRM Travels Singapore : CABIN TECHNICIAN (Walk-in On 12th Feb)
Designation: CABIN TECHNICIAN (Walk-in On 12th Feb)
Experience: 0 - 4 Years
Location: Singapore

Job Description:
* Removal / Installation, Check, Repair and Refurbishment of Aircraft Seats, Galleys, Lavatories, Stowage bins, PSU’s, Oxygen masks and Containers.
* All kind of repairs on cabin interior plastic and non-honeycomb composite parts.

Desired Candidate Profile:
Min 2 yrs Exp in Relevant field.
Diploma/ Degree In Aeronautical.
Excellent knowledge of Removal / Installation, Check, Repair and Refurbishment of Aircraft Seats

Company Profile:
One of the Leading Aircraft Company in Singapore looking For Cabin Technician,,Freshers Can Also Apply..
Walk-in Interview on 12th Feb 2009 at
THE RESIDENCY TOWERS
NO: 115 Sir Thyagaraya Road,
T- Nagar, Chennai -600 017

Address:
PRM Travels
# 02 Rams Apartment
# 78 Rameswaram Road
T Nagar
Chennai,Tamil Nadu,INDIA 600017

Keywords: Cabin Crew , Aeronautical , seats , Aircraft , Airlines

[Guest]

FAIZAL MOHAMMED
Mobile No: +91-9819991320
E-mail: fz00@rediffmail.com


OBJECTIVE

To become part of a result oriented and successful team involved in innovating and implementing new ideas in tune with latest Aviation development and to pursue a successful carrier in the field of aviation.

QUALIFICATIONS

- ACADEMIC QUALIFICATIONS:
Passed S.S.C from MAHARASHTRA BOARD

- TECHNICAL QUALIFICATIONS:
1) Completed DIPLOMA IN INDUSTRIAL ELECTRONICS from M.H.S.S SABOO SIDDIK.

2) Successfully completed 3 years of AIRCRAFT MAINTAINANCE ENGINEERING course in AVIONICS stream equivalent to ICAO Type II approved by D.G.C.A from BOMBAY FLYING CLUB, MUMBAI

3) Passed D.G.C.A LICENSE PAPERS :
PAPER-1 [AIRCRAFT RULES AND REGULATIONS]
PAPER-2 [GENERAL ENGG. & MAINTAINANCE PRACTICES]

- TECHNICAL EXPERIENCE:.
1) Worked in ENGINE &INSTRUMENT SHOP for 3months each in BOMBAY FLYING CLUB.
2) Working as a Junior Service Engineer in AVIONICS & ELECTRICAL section on various Aircraft components & equipments installed on ATR72,BOEING737,B777,A-330,A-320 & BELL412 in MAX AEROSPACE & AVIATION LTD.

PERSONAL PROFILE:


NAME : Faizal Mohammed Patel

DATE OF BIRTH : 22 September 1986.

GENDER : Male.

PERMANENT ADDRESS : Room No:402;Squatter’s colony;chincholi gate;malad(E); Mumbai:400097

COMPUTER NUMBER : E-07036867


DECLARATION

I hereby declare that all my details furnished above are true to the best of my knowledge.

(FAIZAL MOHAMMED PATEL)

[bhalalarohi]

hello i am sending my cv as below so please help me and guide me for job.

Bhalala Rohitkumar Ratilal

203/ Shubhlaxmi society,
Near Akar club,
Nana varachha,Varachha road,
Surat(Gujarat).
Pin code :- 395006
Mobile. No. :- + 91-9510475966 ,+ 91-9879827250
E-mail :- bhalalarohit@yahoo.com


CAREER OBJECTIVE: A rewarding position in a dynamic & professionally
managed organization, where my abilities and skills are
optimally utilized and challenged.


EDUCATIONAL QUALIFICATION

QUALIFICATION MONTH & YEAR UNIVERSITY / BOARD & INSTITUTE PERCENTAGE
B.Tech
(Aeronautical Engg..) Nov 2008 International Institute Of Aeronautical Engg.& Computer Science, Baroda
(JRN. Rajasthan Vidayapeeth University, Udaypur.)
61.83(first class)
H. S. C. (Std. 12th) March 2003 GSEB, GANDHINAGAR Pass class
S. S. C. (Std. 10th) March 2001 GSEB, GANDHINAGAR 80.71(Distinction)



TRAINING
ORGANIZATION DURATION
Hindustan Aeronautics limited, Bangalore One month (2008) Trainee



Detail of Training (HAL)
Industrial Training: - Visited 22 workshop of aircraft division of HAL.
In which got a keen experience of making of Jaguar fighter
Aircraft from Jaguar lathe m/c shop to final assembly as a familiar trainee under guidance of supervisor of every workshop.

Project done (B.Tech in Aeronautical engg.)

Project :- Comparison of Gas turbine engine and Reciprocating engine
of Aircraft.

Details :- The comparison of both Gas turbine and reciprocating engine can
give the information or idea of importance of gas turbine engine and in present it is very efficient than reciprocating engine.


COMPUTER SKILLS
COURSES NAME YEAR NAME OF INSTITUTE CLASS
AutoCAD 2005 2007 B.C.M.
(Government Center, Surat) Distinction
Office Automation 2006 Government center Dist.
Operating Systems (Windows 98, XP) 2005
Government center Dist.


PERSONAL INFORMATION
- Date of Birth :- 8th December,1985
- Nationality :- Indian
- Marital Status :- Unmarried
- Gender :- Male
- Full name of Father :- Bhalala Ratilala v.
- Father’s occupation :- Diamond worker
- Languages known :- English, Hindi, Gujarati


I hereby declare that the above-mentioned information is true to the best of my knowledge.

BHALALA ROHIT R.

[ajay_king3418@ymail]

AJAY KUMAR SINGH E-mail : ajay_king3418 AT ymail.com

CARRER OBJECTIVE :
To carve a niche for myself as a professional in Aviation Industry in the area of Maintenance and Repair and contribute my learning’s & work as a team player for the success of the organization.
PROFESSIONAL PROFILE :
- A dynamic professional having a great flair for learning and believes in creating value for the organisation associated with.
- A team player to the core having a track record of producing quality work within the time frame.
- Like to accept new challenges.
- Open for the criticism to improve my self.

TOTAL AERONAUTICAL EXPERINCE : 04 YEARS & 8 MONTHS
1. Completed 3yrs.DGCA Approved AME course from Hindustan Institute Of Aeronautics, Bhopal.
2. Assisted in Completion of Top Overhaul of six cylinders opposed
Piston engine Of Series Lycoming Continental E-185 installed on NAVION Aircraft
3. MESCO AIRLINES PVT. LTD. 8th Apr 2009 to 7th Oct 2009
Completed ON JOB TRAINING on maintenance Engine & Airframe of the MI-172(VT-MAE) Helicopters having TV3-117VM Twin Turbine engine.
- Assisted in Rigging of Main Rotor and tail rotor Blade.
- Assisted in Tail Rotor Blade changing at 100 hrs Intervals Schedule.
- Assisted in Airframe work. Respectively.
4.Worked as trainee technician in Cheetah/Chetak Army Leg Heli Division
on maintenance of Engine and Airframe with Components since 15 Oct 2009 to 15 Mar 2010.
5. Working as an Instructor in Indraprasth Institute of Aeronautics, Gurgaon from 19 Mar. 2012 to
Till date.
ACADEMIC CREDENTIALS :
- DGCA Approved AME (AIRCRAFT MAINTENANCE ENGINEERING) from Hindustan Institute of Aeronautics, Bhopal with 83% marks.
- Passed XII from CBSE Board with 70% marks
- Passed X from CBSE Board with 74% marks
D.G.C.A LICENCES
- DGCA Papers : Paper I (A/C Rules and Regulations) in Oct. 2007
Paper II (General Engg. & Maintenance Practices) in Oct. 2008
Paper III (Jet Engine) in June. 2009

PROFESSIONAL EXPERINCES :
- Worked As CCE in Aegis Private limited, Udyog Vihar, Gurgaon
- Worked As Junior TL in IBM Udyog Vihar, phase I, Gurgaon
- Worked As Project Manager/BDM with IT WAVE SOLUTION, Mahipalpur, Newdelhi.
- Worked As Junior Officer in ICICI bank limited Sector-14 Branch, Gurgaon
- Working as an Instructor in Indraprasth Institute of Aeronautics, Gurgaon from 19 Mar. 2012 to
Till date.

PERSONAL DETAILS :
- Date of Birth : Oct. 15, 1986.
- Father’s Name : SUB. Major Babu Singh
- Languages known : Hindi & English.
- Nationality : Indian.
- Computer No. : E-07035643
Declaration : I declare that above mentioned facts are true & correct to the best of my information.
DATE :26 SEPTEMBER 2012
(AJAY KUMAR SINGH)

[bhonzo ann andrews]

hello sir,
i am a B.E HOLDER IN AERONAUTICS.I want to work for the following post given in your AD.I don't have experience but i have knowledge in aeronautical.
my resume
RESUME

BONZO ANN ANDREWS
C/O BIJU K.P,KARITHARA HOUSE
33/2244 C,MADAVANA WEST ROAD
VENNALA P.O, KOCHI-682028
Mobile: +91 9629382619
+91 9947087530
E-mail:bonzo_ann AT yahoo.co.in
bonzo.ann AT gmail.com


Objective
To become a professional where I could use my knowledge and skills effectively and efficiently and which also provides an environment for acquiring new skills and knowledge constantly.

Experience Summary
- In-plant training in TAAL(Taneja Aviation & Aerospace Limited) FOR 1WEEK

Academic Profile

Degree % Marks University/Board Year Passed
B.E- AERONAUTICAL ENGINEERING 61%-VIIth semester,preferring final year completion on may 2010 ANNA UNIVERSITY 2010

+2 [V.H.S.C] 59% BOARD OF PUBLIC EXAMINATIONS, Kerala 2006
S.S.L.C [ 10th ] 64% CENTRAL BOARD OF SECONDARY EDUCATION,NEW DELHI 2004

TECHNICAL QUALIFICATION
- PAPER PRESENTATION ON IMPACT OF NANO MATERIALS
- NATIONAL SEMINAR ON LIGHT COMBACT AIRCRAFT FROM AERONAUTICAL DEVELOPMENTAL AGENCY
- NATIONAL SEMINAR ON ROCKET PROPULSION FROM ISRO(INDIAN SPACE RESEARCH&ORGANISATION)

OPERATING SYSTEMS KNOWN
- COMPUTER AIDED DESIGN IN 2-D&3-D
- DESIGN OF FUSELAGE&WING IN CESSENA

EXTRA CURICULAR
- GOOD IN COMMUNICATION SKILLS
- GOOD IN MANAGERIAL SKILLS
Personal Data
Father name : M.J Robbert
Date of Birth : 21/02/1989
Sex : Male
Nationality : Indian
Languages Known: English , Hindi , Malayalam, and Tamil.

Declaration
I here by declare that the given above information are true to the best of my knowledge and belief and can be supported with reliable documents when needed.

Thanking you,
BONZO ANN ANDREWS

[bhonzo ann andrews]

hello sir,
i am a B.E HOLDER IN AERONAUTICS.I want to work for the following post given in your AD.I don't have experience but i have knowledge in aeronautical.
my resume
RESUME

BONZO ANN ANDREWS
C/O BIJU K.P,KARITHARA HOUSE
33/2244 C,MADAVANA WEST ROAD
VENNALA P.O, KOCHI-682028
Mobile: +91 9629382619
+91 9947087530
E-mail:bonzo_ann AT yahoo.co.in
bonzo.ann AT gmail.com


Objective
To become a professional where I could use my knowledge and skills effectively and efficiently and which also provides an environment for acquiring new skills and knowledge constantly.


Experience Summary

- In-plant training in TAAL(Taneja Aviation & Aerospace Limited) FOR 1WEEK


Academic Profile

Degree % Marks University/Board Year Passed
B.E- AERONAUTICAL ENGINEERING 61%-VIIth semester,preferring final year completion on may 2010 ANNA UNIVERSITY 2010

+2 [V.H.S.C] 59% BOARD OF PUBLIC EXAMINATIONS, Kerala 2006
S.S.L.C [ 10th ] 64% CENTRAL BOARD OF SECONDARY EDUCATION,NEW DELHI 2004

TECHNICAL QUALIFICATION
- PAPER PRESENTATION ON IMPACT OF NANO MATERIALS
- NATIONAL SEMINAR ON LIGHT COMBACT AIRCRAFT FROM AERONAUTICAL DEVELOPMENTAL AGENCY
- NATIONAL SEMINAR ON ROCKET PROPULSION FROM ISRO(INDIAN SPACE RESEARCH&ORGANISATION)


OPERATING SYSTEMS KNOWN

- COMPUTER AIDED DESIGN IN 2-D&3-D
- DESIGN OF FUSELAGE&WING IN CESSENA

EXTRA CURICULAR
- GOOD IN COMMUNICATION SKILLS
- GOOD IN MANAGERIAL SKILLS
Personal Data
Father name : M.J Robbert
Date of Birth : 21/02/1989
Sex : Male
Nationality : Indian
Languages Known: English , Hindi , Malayalam, and Tamil.

Declaration
I here by declare that the given above information are true to the best of my knowledge and belief and can be supported with reliable documents when needed.

Thanking you,
BONZO ANN ANDREWS

[jacinth_aero]

I have attached my resume for ur kind perusal

RESUME
B.Angela Jacinth

Objective:
To accomplish my dream to become an enlightening engineer by utilizing your company’s reputation and to strain my every nerve to be a full- fledged designing Engineer by designing intrinsic novel innovative designs in aircrafts and to search strategies to avoid flight mishaps

Educational Qualification:
Qualification Institute Percentage
B.E(AERONAUTICAL) Nehru Institute of Engineering and Technology,Coimbatore 75.18(upto 7th Semester)
XII Magdalene Matric Hr.Sec School,Tirunelveli 88.17
X Sarah Tucker Hr.Sec School,Tirunelveli 95.8

Software skills:
I have qualified myself with a professional degree of Mechanical CADD
- Foundation-AutoCAD
- Diploma- CATIA V5
- Professional-ANSYS

Inplant Training:
- Completed my inplant training in ISRO-IISU(Indian Space research Organization-Inertial reference systems unit) in Trivandrum.
- Have done a flight training course in IIT (Indian institute of technology),Kanpur. (SINUS 911) and (PIPER-SARATOGA)
- Completed a familiarization course in “Air Traffic Control” in Cochin International airport (CIAL) under Airports Authority of India

Project:
A Project on “Landing gear Surveillance” in Cochin International Airport(CIAL) under “Airports Authority of India”

Strength:
- Aircraft designing
- Rockets modeling
- Aerodynamics & Aircraft structures
- Aircraft Systems & Instrumentation
- Aircraft repair and maintenance

Hobbies:
Dreaming is my fun-time hobby and I used to scribble poetries and drawings.

Extra-curricular activities:
- During my schooling, Leaded my school Literary debating society as a Secretary.
- Have won many laurels in many debates,mono-act,Essay competitions, Science Olympiad quiz competitions
- Have done my paper presentation on “Robotics and Artificial Intelligence”

Managerial skills:
- I am ready to work with my team as a wing leader for my team
- To promote the fails of the company and for the upliftment of my department.
- Administration over all inspection allocation of duties will be rendered by me with such skill and dexterity.
- I will allot and assign works according to their capacity and press on them to finish it on time.

Declaration:
I have appeared for my B.E final year, last semester and awaiting for my results., I assure you sir/madam, that If I join the company, I will strain my every nerves to come out successful in flying colours in all the works assigned to me. I will work with my team members with a congenial and amicable atmosphere for the benefit of the company and to promote the development of the company.

All the details furnished by me are genuine and true

Date:19.5.10 (B.Angela Jacinth)
Coimbatore.

[Guest]

RESUME
SRIDHAR D
E-mail id : sriukt AT gmail.com , aeroukt AT yahoo.com , dsridhar.aero AT gmail.com .
Objective :
I would like to make best use of my acquired skills with an opportunity to improve on the same and contribute to the growth of the firm in every way I can.
Summary :
- Capable of handling analysis and Structural designs.
- Good analytical and problem solving skill.
- Adjustability and adoptability to any environment.
- Hard Working and committed team member.
Academic Qualification :
Qualification Institution Board/University Year of passing Percentage
B.E (AERO) VSB ENGG COLLEGE Anna University 2010 61%
Higher Secondary GOVT HR SEC SCHOOL State board 2004 67.42%
SSLC GOVT HR SEC SCHOOL State board 2002 73.44%
Technical Skills :
- Area of interest : Propulsion, Aerodynamics & Flight Dynamics.
Career Summary :
Name Of The Company : SCANSTAR NDT SERVICES
Duration : 1 Year Expirens.
Technical Achievements :
- Won I prize in ‘Glider competition’ at Noorul Islam University - Kanyakumari
- Won 2nd prize in “Aero Modelling” at Noorul Islam University - Kanyakumari.
- Won 2nd prize in “Wooden Craft” at Jaya Engg College - Thiruinravur.
- Participated in “water rocket competition” at Anna University - Chennai.
- Participated in “Paper presentation” at Noorul Islam University – Kanyakumari.
- Participated in “Glider Competition” at Anna University - Chennai.
Programming Skills :
- Auto CAD
- CATIA
- ANSYS
- MS office
Hobbies :
- Aero modeling
- Playing Kabadi.

ENGINEERING PROJECT :
DESIGN AND ANALYSIS OF MICRO TURBINE
A micro turbine can be used in UAV, refrigerator, generator; air drier. A micro turbine being small in size compared to large turbine has less weight which reflects on pressure ratio, low cost, easy maintenance.
In our project we are going to design and analyze the compressor blade and shaft of a micro turbine. The compressor of the micro turbine is analyzed with different number of blade, with different rotational speed of the shaft.
Thus we consider an engine comprising of a single shaft compressor. The various type of impeller model are used in this with four blade, six blade, eight blade, ten blade are been taken in account.
The analysis of the compressor is carried out with CATIA V5 R17, ANSYS 10, Compressor blade has been designed and CFD analysis, Structural analysis is been carried out. The result proves that our design is efficient and good in performance wise.

[Unregistered]

RESUME OF
Tufayal Ahmed Choudhury
Email : roneein AT yahoo.com

Objective :
Among to build up a versatile and challenging career in a positive and dynamic environment of well-organized organization, where the opportunity to utilize knowledge and experience will be available for professional's career development.

Educational Qualification :
Aeronautical Engineering :
Name of Institution : Sathyabama University
Result : 1st class with 66%
Passing year : 2013

All India Senior School Certificate Examination :
Name of Institution : Kendriya Vidyalaya Kailashahar North Tripura
Group : Science
Result : 63.4%
Passing Year : 2009

All India Secondary School Examination :
Name of Institution : Kendriya Vidyalaya Kailashahar North Tripura
Group : Science
Result : 59.2%
Passing Year : 2007

Additional Information :
Language Literacy : Hindi, Tamil and English
Computer Skills : MS Word, MS Excel, Internet Browsing
Other Skills : Communication Skill, Teamwork, Self -Motivation ,CAD,C++,Programming in C

Personal Details :
Name : Tufayal Ahmed Choudhury
Father’s Name : Gias Uddin Choudhury
Mother’s name : Monowara Begum
Nationality : Indian
Date of Birth : 4th April 1990
Marital Status : Single
Email : roneein AT yahoo.com

I hereby am stating that all Information mentioned above is absolutely correct with the best of knowledge.

Sincerely Yours,
Tufayal Ahmed Choudhury
Date : 07-05-2013