Bonatti Saudi Arabia : QA/QC Piping Inspector

[Admin]

Bonatti Saudi Arabia : QA/QC Piping Inspector

Designation: QA/QC Piping Inspector
Experience: 5 - 7 Years
Location: Saudi Arabia

Job Description:
Requirements as per SAUDI ARAMCO

Inspector shall be High School graduate, or equivalent; shall be able to read, write and speak English Language; shall be fully conversant with applicable Industry Standards and Specifications.

Company Profile:
Client Name: Bonatti
Bonatti S.p.A. began its activity as Contractor in 1946 under the name Ing. Saul Bonatti & F.lo: By the time its main activity was wells drilling and mechanical works

Email Address: career@asmacs.net

Keywords: Exp in variety of inspection functions with minimal supervisions

[Guest]

CURRICULUM - VITAE
Mohammad Riyazuddin
Email : mryz.786 AT gmail.com

CAREER OBJECTIVE :
Looking forward for a suitable opening in Inspection / QA / QC and Industrial Piping Materials field under reputed organization in order to perform dedicated, committed, productive & efficient exposure of my talents, skills and capabilities to the benefit of the employer and simultaneously work towards my career development and personal growth.
EDUCATIONAL QUALIFICATIONS :
Bachelors Degree in Mechanical Engineering in 1st Division from Bangalore University, Bangalore, India in the Year 1991
CAREER SUMMARY :
More than 15 Years of experience in the Kingdom. Hands on experience in industrial, buildings construction projects and manufacturing companies. Industrial projects like petrochemical process plants, Turn Around Maintenance ( Shutdown Projects ). Building construction projects such as infrastructures, HVAC, plumbing and fire fighting.
Worked with different clients and companies like JUPC-Sabic, Advanced Petrochemical Company (APC), Fluor Arabia Ltd ( Saudi Kayan Project – Sabic ), SIPCHEM, Foster Wheeler Arabia Ltd.- Jana Chenicals, CCE-Saudi Aramco, Saudi Oger Ltd.-KJO, Raymonds Saudi Arabia Ltd.-Royal Commission, Al Fouzan Steel Industry and Zamil Air Conditioners Ltd. Co.
Well versed with Quality Control , Quality Assurance and ISO.
Exposure in SAP ( MM & PM Modules Transaction ), RAMIS & EDMS Softwares.
CERTIFICATION IN FOLLOWING PROFICIENCY COURSES :
1. Refrigeration and Air Conditioning system.
2. Industrial Hydraulics and Pneumatic Controls system.
3. Tungsten Inert gas welding ( TIG/GTAW)
Conducted by “Advanced Training Institute “Ministry of labor, Government of India,
Hyderabad, A.P
4. Radiographic Testing ( RT )
5. Magnetic Particle Testing ( MPT )
6. Ultrasonic Testing ( UT )
7. Dye-Penetrant Testing ( DPT )
Conducted by “Kalva Institute of NDT & Quality Management” Hyderabad, A.P. India
(In accordance with ASNT Standard)
8. Fiber glass Reinforced Thermosetting Resin (RTR) Piping & Fittings System.
9. Fiberglass GRP/FRP Fuel Storage Tank System.
Conducted by “AMIANTIT BONDSTAND LTD & AMIANTIT FIBERGLASS INDUSTRIES LTD (AFIL). AMIANTIT GROUP DAMMAM, KSA.
IT PROFICIENCY :
MS Office ( Windows 2007 ), SAP-MM & PM Modules Transactions, RAMIS & EDMS.
PROFESSIONAL EXPERIENCE :
1. From : 05st June 2010 – 06 Oct 2011
Employer : Jubail United Petrochemical Company ( JUPC ), A Sabic Affiliate
Role : Material Coordinator
Project : Ethylene Glychol ( EG 1& 2) Reliability and Enhancement Project -2010
(Turn Around Maintenance and Units Equipments Replacement and Modifications)
Project Description : Replacement of 5 columns, 5 Pressure Vessels, 2 Heat Exchanger and
other modification works etc.
Job Responsibilities :
- Inspection of project materials ( Stock and direct charge items ) on the basis P.O. text requirement, Material Test Certificate ( MTC ) and manufacturers documents.
- Preserving materials from atmospheric effects at yards against damages / spoils.
- Making proper arrangements for materials for easy identification as per job ID, equipment number MOC number and material number.
- Maintaining proper documentation in soft and hard copy files.
- Assisting in planning activities by doing transactions in MM modules for ME 51 N, ME 52 N, ME 53 N, PM modules for IW 21, IW 22 & IW 23(NOTIFICATIONS), IW 31, IW 32, IW 33(WORK ORDERS).
- Searching Material numbers in RAMIS for different types of materials.
- Printing the P&ID, isometric drawings and equipments data sheets from EDMS softwares.
- Issuing material to contractors as per job ID, equipment number, material number for execution.
- Updating materials stock physically and in the system frequently.
- Preparing technical packages for EG1&2.
2. From : 01st March 2010-31st March2010 (1 month)
Employer : Advanced Petrochemical Company (APC)
Role : Inspection Engineer
Project : Turn Around Maintenance-2010 in running process plant
Project Description : Modification at 22 TIE-IN joints in poly de-hydrogenation (PDH) plant, 2” Dia Dry Flare line modification in Polypropylene (PP) Plant, Cleaning of Dryers, Filters, Strainers, Pressure Vessels and overhauling of manual and automatic Gate Valves etc.
Job Responsibilities :
- Review of P&ID, Isometric drawings.
- Review of ITP, WPS of respective job.
- Visual inspection of FIT-UPS, weld joints and Dye-Penetrant test(DPT) of TIE-IN joints as per ASMESECV & ASME B31.3
- Pre-internal inspection, middle inspection, final inspection of dryers, filters, pressure vessels, dearator, strainer’s, after high pressure water jetting (HPWJ) and final Box-up of equipment.
- Inspection of overhauled manual and automatic gate valve’s (Kuboto) and witnessing of hydro static pressure testing at valve’s servicing center (work shop)
- Preparation of final inspection package for assigned jobs.
3. From : October 2009 to February 2010 (5 months)
Employer : FLOUR Arabia Ltd (FAL), EPC Contractor
Role : Piping Inspector
Company : Saudi Arabian Kentz Co. Ltd.
Project : U & O (Utilities & Off Sites) - Saudi Kayan Petrochemical Complex, Jubail KSA
Project Description : Construction of plant support utilities like crude oil boilers A & B, package boilers A,B,C,D,E, Incinerators A & B, De-mineralized water system, air compressors and flare system, etc.
Responsibilities :
- Review of P & ID, Isometric Drawings and Inspection of Test Plan (ITP)
- Familiar with SABIC and International Engineering Standard and Codes.
- Inspection of Industrial Process Piping (Metallic & Non Metallic)
- Co-ordination with client representative and Sub-contractor crew to solve technical issues.
- Witnessing of Hydro test, Pneumatic test, Service test, Air blowing and Visual Inspection for Vent and Drain lines.
- Witnessing of Bolt Torquing for different sizes of Flange assemblies
- Inspection of Re-instatement of Process pipelines after Hydro test and Preparation of Punch list
- Attending weekly meetings to discuss quality issues
- Raising NCR against violation of specification and drawing requirements by Contractor.
4 .From : August 2009 - September 2009 (1Month)
Employer : Saudi International Petrochemical Co. (SIPCHEM), Jubail, KSA
Role : Inspection Engineer
Project : SIPCHEM Turnaround / Shutdown Construction
In designated areas 12-Tie-In points in utilities, Engineering work requests (EWR), Plant project management (PPM), Reformer burner’s replacement works in Methanol plant.
Main Responsibilities :
- Review the P&ID and Isometric drawings.
- Review the WPS, QCP & ITP of respective job.
- Inspection of fit-ups as per isometric drawings.
- Visual inspection of weld joints, identifying and marking defects and joints.
- Inspection of Magnetic Particle Test (MPT) and Dye Penetrant Test (DPT) and identifying indications on weld joints.
- Accepting NDE result as per ASME section V and ASME B31.3.
- Inspection of reformer burners during and after installation in Methanol Plant.
5.From : June 2007 To December 2008 ( 18 Months )
Employer : Foster Wheeler Arabia Ltd. (EPC Contractor), Jubail, KSA
Role : QA/QC Piping Inspector
Project : Jubail Chemical Industries Co. Ltd. (JANA), NAMA Group, KSA
Hassad (Chemical Process Plant Expansion) : Construction of production units Allyl Alcohol (AAL), Epiclorohydrine (ECH) Chlor Al Kali (CAL), Calcium Chloride (CACL) and plant support utilities. Like De-Mineralize Water Plant, Boiler for steam generation, cooling water System and chilled water system etc.
Main Responsibilities :
- Review of P&ID, Isometric and GA drawings.
- Familiar with Saudi Aramco and International Standard codes.
- Inspection of industrial process piping and its supports.
- Co-ordination with Client representative and sub-contractors related to construction and inspection activities.
- Quality Surveillance inspections on contractors project execution during different phases of execution.
- Line checking as per ISO and P&ID and preparation of punch list.
- Witnessing service test / hydro test for completely erected lines according to test limits and required pressure.
- Review of project quality plan and Inspection and Test Plan (ITP).
- Assisting in pre-commissioning and commissioning activities.
- Inspection of material as per MRR / packing list / delivery notes.
- Raising NCR against violation of specification & drawings.
6. From : Feb 2006 To May 2007 ( 15 Months )
Employer : Contracting & Construction Enterprises (CCE) Ltd. Khursaniyah, Jubail-2, KSA
Role : QA/QC Vendor Inspector (Approved By Saudi Aram co SAP#70004599)
Project : Saudi Aram co, Khursaniyah Industrial Support Facilities (KISF), KSA
Construction of temporary and support facilities of gas plant etc.
Main Responsibilities :
a) RTR Pipes & Fitting Inspection And GRP/ FRP F uel Storage Tanks I nspection at Factory :
- Witnessing of Hydrostatic and Mechanical test as per ITP and, Saudi Armco form 175 requirements.
- Final Visual Inspection of products as per Saudi Aram co form 175 requirements.
- Inspecting the products as per standards 01-SAMSS-034, AWWAC950 and purchase order & drawing requirements.
- Reviewing and signing on all QA/QC Documents comes under Inspection Assignment package.
- Preparation of Release Note and Material Release for shipment.
- Preparation of Inspection Assignment package & Vendor Inspection completion package and submit to Saudi Aram co.
- Witnessing Vacuum Test, pressure Test, Lifting Device Test, Marking (Identification) and visually checking surface defects under final Inspection for tanks.
- Inspecting the products as per standard 32-SAMSS-030, Purchase order, Drawings, ITP & Saudi Aram co form
b) Job Responsibilities at Site :
- Familiar with Saudi Aram and International Standards & codes.
- Study and review of all shop drawings, project technical specifications.
- Inspecting project materials as per MRR (Materials Receiving Report).
- Inspecting the installed mechanical utilities based on RFI and as per approved shop drawings issued for construction.
- Arranging the timely inspections with authority Saudi Aram co Inspector to get approval for each performed activities.
- Coordination with construction department, sub-contractors and Saudi Aram co Inspector for technical problems.
- Raised NCR’s against violation and non conforming quality of materials and execution works.
7. From : Feb 2005 To Feb 2006 ( 12 Months )
Employer : Saudi Oger Ltd., Al Khafji, KSA
Role : QA/QC Inspector (Approved by KJO)
Project : KJO (AL-KHAFJI JOINT OPERATIONS) Construction of MTD & Work
Shop Package, KSA
Construction includes Aram co Marine Terminal Department facilities etc.
Main Responsibilities :
- Familiar with ASTM, ASME, SASO etc. Desktop standards.
- Study and Review of all approved shop drawings, project technical specifications and applicable standards
- Review of Technical Material Submittals submitted by contractors.
- Preparation of Field Quality Control Procedures, ITP, Method Statement for Mechanical Utilities & Installation and Testing
- Inspecting the Plumbing, Firefighting and HVAC Materials on the Basis of Material Inspection Report (MIR)
- Inspecting the Mechanical Utilities Installation based on RFI and as per approved Shop Drawings
- Arranging the Timely Inspections for Authority (Consultant) to get approval for Performed Activity
- Coordination with Construction Department, Subcontractors and consultant to solve Technical Problems.
- Implementing quality controls system on site
8. From : Nov 2003 To Dec 2004 ( 13 Months )
Employer : Raymond’s Saudi Arabia Co. Ltd., Jubail, KSA
Role : QA/QC Inspector
Project : Royal Commission -Rehabilitation of Treated Waste Water Facilities, Jubail, KSA. Construction includes installation HDPE pipes for irrigation facility etc.
Main Responsibilities:
- Inspection of BUTT-FUSION WELDING JOINT, ELECTRO-FUSION WELDING JOINTS of HDPE Pipes & Fittings
- Inspection of Pipes & Fittings Material received from Vendor as per project requirements and Royal Commission Specification
- Preparation of Daily QC Reports, Log Sheet and Submitting to the QC Manager
- Pre-inspection of Hydro test and after hydro test Inspection
- Coordination with Client Representative (Consultant) for Technical aspect to get Inspection approval for each performed activity.
MANUFACTURING COMPANIES
9. From : May 2002 To Oct 2003 ( 17 Months )
Employer : Al-Fozan Steel Industries Co. Ltd., Dammam, KSA
Role : QA/QC Supervisor
The company dealing with manufacturing of building construction materials like straight rebar’s, wire mesh, flat bars and corrugated roof sheet etc. Handling with lead man and operators etc.
Main Responsibilities:
- Reporting to Q.C Manager, Looking after supervising all QA/QC activities in the shop floor
- Inspection of raw materials, as per company quality policy and required specifications.
- Preparation of daily Q.C inspection reports, in process inspection reports rejection reports and final inspection reports.
- Preliminary inspection, in process inspection during fabrication and final inspection of finished products before delivery.
10. From Apr 1995 To Apr 2002 ( 7 Years )
Employer : Zamil Air conditioners Co Ltd. Dammam, KSA
Role : QA/QC Supervisor
The company Zamil Air Conditioners is manufacturer of consumer and applied products (Air Condition), and I am maintaining the quality over production. Etc.
Main Responsibilities:
- Reporting to Q.C Manager, after performing all supervising activities related to the inspection of Air Conditioning utilities in shop floor.
- Inspection of raw materials, as per company quality policy, requirements and specifications.
- Communicating with vendors about the raw materials damages.
- Preliminary inspection of components before assembly in process inspection and final inspection of finished products before packing.
- Issuing of non-conformance during internal auditing against violations.

[Guest]

CURRICULUM VITAE
SHADH AHAMED M
QUALITY CONTROL ENGINEER


Email :
shadh.ahmd AT gmail.com
Languages Known :
- English, Hindi, Malayalam (able to read, write and speak)
- Arabic (able to read and write)
CAREER OBJECTIVE :
Intend to build a career with leading corporate of hi-tech environment with committed and dedicated people, which will help me to explore myself fully and realize my potential.
SUMMARY :
- 2 years experience in Quality Control for Oil & Gas projects, worked in countries like India and Uae.
ACADEMIC QUALIFICATION :
- B.E in Mechanical Engineering.
- ASNT Level II Certificate in RT, UT, MT, PT.

ADDITIONAL QUALIFICATION :
- Post Graduate Diploma in Oil Field Engineering & Quality Control from Induscan Petroleum Institute, India with the following subjects.
- Construction Drawings such as P&ID, Piping Isometrics,
Equipment, Structural, GAD.
- Familiar with material inspection, dimensional check & documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516, SA 105, SA 312, SA 240, SA 234 etc and with ANSI Standards of B 36.10, B 16.5, B 16.9 etc.
- Thorough knowledge in Welding Standards of ASME Section IX and API 1104. Familiar with welding procedure qualification, welder qualification, p numbers, selection of electrodes, weld visual inspection etc.

- Good knowledge in radiographic interpretation of weld joints, ultrasonic inspection, magnetic particle inspection and penetrant test, reporting and documentation.

- Good knowledge about fabrication of piping, structure, pressure vessels and other equipments, documentation of history sheet, test pack clearing etc.

- Highly confident to handle the construction & quality control activities as specified in the drawings, application standards and specifications.
PROFESSIONAL EXPERIENCE :
Present Experience :
Working as QC Engineer / QC Inspector in Robt.Stone (ME) LLC, Abudhabi, Uae from
August 2010 to till date.
Robtstone is an experienced EPC & Maintanance Contractor for pipeline & process plant in the Oil & Gas sector of Uae and New Zealand.
Projects Assigned :
1. Natural Gas Transmission and Distribution Supply to Yas Island – Abudhabi.
Description : Installation of 8 kms long Gas-Pipeline (24", 16" & 12" dia) including hot
tap, highway and canal crossing, launcher, receiver stations, primary and
secondary pressure reduction stations (PPRS & SPRS I & II) and
arranging temporary gas supply by 10" PE Pipeline.
Client : GASCO (Abudhabi Gas Industries Ltd).
2. NGD 07 – NGV Filling Stations High Pressure Pipeline Connections – Abudhabi & Al Ain.
Description : Installation of Gas Pipelines for 7 fuel stations in Abudhabi and Al Ain
including AGI's i.e; Pressure reducing skid, H2S skid, ROV skid, hot taps
and NDRC of major highways.

Client : GASCO.
3. Carry out Inspection and Repair as per API 650 to Water Tank 81-TK-101B – Abudhabi.
Description : Carry out MFL Inspection of Water Tank of size 20 m dia x 10 m ht,
repair works of the corroded plates and internal painting of the tank.
Client : GASCO.
4. Rehabilitation of 67 No's Supports welded on top of Habshan – 0 flare piping – Abudhabi.
Description : Rehabilitation of Pipe Supports including grinding, cutting, blasting and
painting.
Client : GASCO.
Job Responsibilities :
- Review of project specifications, material requisitions, drawings & vendor documentation for compliance to project quality requirements.
- Preparations of Method Statements, Inspection & Test Plans, WPS, PQR for various pipeline projects.
- Inspection and reviewing of material certificates, incoming material inspection reports before using the materials to the process.
- Maintaining calibration system of inspection / measuring tools used in the project
- Inspection of welding consumables as per required specification.
- Reviewing MT, PT, UT, RT, MFL and Vaccum Box Test according to specification.
- Inspection of blasting, profile check, chloride check, painting, wet film thickness, dry film thickness of pipeline joints, piping & storage tanks (internal lining).
- Inspection & witnessing of holiday test and adhesion test for painting, coating etc.
- Conducting the pipeline testing activities including cleaning using pigs, gauging, hydro testing, drying and precommissioning.
- Played a key role for hot tapping activity including welding and perforation.
- Prepare and issue site inspection reports with all findings, abnormalities & recommendations.
- Control of quality records, compilation of test packs & submission of final data dossiers.
- Inspection of all construction activities related to installation of pipelines which includes row, stringing, trenching, field joint coating, pre padding, lowering, post padding, backfilling, hdd and erection of piping, installation of equipment & block valve stations.
Previous Experience :
Worked as QC Engineer in PEEKAY Steel Castings (P) LTD, Kerala, India from
July 2009 to April 2010.
PEEKAY Steel Castings is a leading manufacturer of steel castings of carbon steel, stainless steel, alloy steel of various compositions in various sizes and weights for oil & gas sectors, mining, power & other engineering sectors.
Job Responsibilities :
- Familiar with materials like carbon steels, austenitic stainless steels and low alloy steels.
- To inspect casted material, welding activities.
- Assisting non destructive testing, reporting and documentation.
- To verify materials test certificates and specification.
- Check hardness on castings wherever customer requirements.
- Preparation, review and maintaining of various quality documents such as NDE reports, defect sketches, weld map, inspection cards etc.
- To carry out the final inspection when the product is ready for despatch.
- Co-ordinating with the client for technical queries and resolving issues.
TRAININGS ATTENDED :
- Permit To Work training from ADCO.
- Permit To Work training & HSE Induction from GASCO Pipeline Division, Maqta.
- Permit To Work training & HSE Induction from GASCO Pipeline Division, Habshan.

- HSE Induction from BPCL Refinery, India.

[Guest]

CURRICULUM VITAE
PERSONAL DATA :
Name Gyula Modrovits
email : modrovits AT tvn.hu
Marital status : married with two children
Education : Technical vocational secondary school
Mechanical Engineering University BSc.
Languages : Hungarian - native
English, Russian – good German – little
Computer knowledge : Word , Excel are good, AutoCAD user only
Skills : driving license A, B, C category

CAREER RECORD :
2010- General Electric TANECO project at Kama river region in Russia
Job : Piping superintendent
Duties : Supervising low and high pressure piping execution contractors by ISOMERIC
drawing and P&ID. Controlling equipments erections. Installation and adjusting of
rotating equipments
2008-2009 General Electric _ Sea Water Desalination Project in Turkmenistan
Job : Project Control Engineer
Duties : Supervising low and high pressure piping execution contractors by ISOMERIC
drawing and P&ID. Controlling equipments erections. Installation and adjusting of
rotating equipments.

2005-2008 Chemimontazh Ltd. - Oil-gas project in Karabatan / Kazakhstan.
Job : QA/QC-Pressure Test Engineer
Duties : Piping quality control, supervising the pressure test, documentation for pressure test,
Finishing the Test Packages complete.
2005-2008 Chemimontazh Ltd. - TCO project in Tengiz / Kazakhstan.
Job : Piping Supervisor, Piping Engineer, QA/QC Engineer,
Duties : Piping Supervisor: leader of large pipe fitting crew at a Chevron project.
Our task was small-large bore piping ½”-42”,carbon-stainless- PE piping,
hydro- pressure test in Second Generation Project
Piping Engineer : in technical aid of Project Manager, maintenance technical
documentation, Red Line, DCC activity.
QA/QC : keep quality, documentation of piping, NDE organization, progress report
2002-2005 Strabag Ag. Austrian road builder Co.
Job : That was out of interesting for Oil-gas industry either piping job as well. I was fore
man there.
Duties General repair the road builder equipments.-Finisher, compactor, excavator
2001-2002 General Electric I.I. West Kazakhstan Development Project
Job : Piping Superintendent of mechanical division.
Duties : Gas power station was build for energy supplying of Karachaganak Gas Project
It included three 40 MW ALSTOM turbine whit auxiliary systems, gas
compressors, substation, switch yard, boiler house and all piping systems of power
station. The piping system includes high pressure pipes for fuel gas, large bore pipes
for fleur gas, instrument air system, utility air system, utility water system, heater
system and so on.

My responsibility was erecting and installation of turbines and any other
equipments. Prefabrication, erecting and installation of piping networks.
I had to pay attention to safety, quality and extremely for feasibility. We were under
pressured for death line.
1999-2001 AUDI Hungary Ltd. and VAW aluminum works in Hungary
Job : Maintenance engineer
Duties : Responsible for maintenance and troubleshooting especially for potable water, air
filtration and waste water separation and treatment
1997 -1999 Valmont (one of the biggest irrigation Co. in USA) Participation in irrigation project of Valmont in Iraq. Romania and Kazakhstan
Job : Supervisor
Duties : Participation in irrigation project of Valmont in Iraq, Romania and Kazakhstan.
Supervising assembly and installation of irrigation equipment. Piping work in pump
stations. Supervising of irrigation piping network execution.
1992-1997 IKR Bábolna Trading Co. Hungary, Foreign Programs Division in Russia
Job : Project manager
Duties : Supervision and practical implementation of complete field production

[Unregistered]

KRUSHNA CHANDRA SAHU
E-Mail : krishnach.sahu1 AT gmail.com
Kcsahu3 AT gmail.com

In quest of career enrichment assignments in QA/QC INSPECTOR.(PIPING) with an organization of high repute.
Location Preference : abroad.

Synopsis :
- A growth driven self-motivated professional offering over 5 years of rich experience in Inspection and Execution of projects related to Oil & Gas Industry, Petrochemicals, Power Plant & Natural Gas Transmission, Distribution Pipeline and Gas Plant Project Construction and Piping jobs as a QA/QC Engineer coupled with strong leadership and communication skills to contribute in achieving organization’s long-term goal.
- Relevant exposure in handling projects and encompassing quality and industrial relations.
- An excellent communicator with strong interpersonal, analytical & problem solving skills.

Academic Credentials :
DIPLOMA ENGINEER :
Technical Qualification :
Code Awareness :
I am familiar with following standard and codes.
ASME SECTION II
ASME SECTION V
ASME SECTION VIII (Division - 1)
ASME SECTION IX
ASME B31.1
ASME B31.2
ASME B31.3
API 1104

Qualification in ASNT Level – II
ASNT Level II in LPT.
ASNT Level II in RT.
ASNT Level II in MPT.
ASNT Level II in UT.

Duties & Responsibilities as a QA/QC INSPECTOR :
- Review of inspection and Test plan (QAP) per QC-Procedure, Client Specification and Approved Drawing.
- Review of the project scope of work, material specifications, and drawings for any conflict with the requirement of the Quality standards and advise the Engineering Dept to initiate the corrective actions with the client prior to commencement of work.
- Preparation of WPS & PQR.
- Preparation of welding inspection summary.
- Inspection of joints fit up, alignment and dimensional accuracy as per drawing requirements
- Witness of Hydro testing, PWHT & Pre heat, post heat requirements etc.
- Verification of package punches and preparation of Quality dossiers.
- Maintaining welding inspection/NDT reports and record tracking
- Carry out blasting and painting inspection of all the jobs as per specified requirement.
- Preparation of welding inspection summary / joint tracking log.
- Verification of punch list and test packages.
- Co-ordination with client or TPI or Contractor.
- Interpretation of Isometric drawings and Weld maps.
- Witness of welding procedure qualification, welder performance qualification & approval.
- Witness mechanical test on materials like Bend test, Hardness test, Tensile test, Charpy impact test etc.
- Inspection of joints fit up, alignment and dimensional accuracy as per drawing requirements.
- Offering of NDT Test involves to Inspection Agency & Approve.
- Review of NDT Test Report with TPI or Client.
- Defect mapping & attain the repair work.
- Quality control documentation as per Quality inspection Procedure.
- To ensure related activities are carried out in accordance with project specifications.
- Carry out internal audit of related shops and office.
- Preparation of QC Report.

Experience & Job Responsibilities :
COMPANY NAME : Jordan Petroleum Refinery Company Limited (Jordan)
Period : 29-08-2008 to 16 - 02-2010
Position : Quality Control Inspector.
Job Profile :
- Fit-up inspection of weld joints.
- Preparation of daily welding reports.
- Interpretation of radiography films as per applicable code.
- Preparation QA/QC dossier as per client requirement.
- Coordination with NDT team at site.
- Monitoring of Preheating/ Post heating / post weld heat treatment and electrode backing activities.
- Inspection and testing of safety relief devices. Preparation of test pack and witnessing of hydro test.
- Interacting & coordinating with Clients for Quality parameters.
- Witness the Welding for establishing PQR for welding processes GTAW, SMAW.
- Witness the stage wise inspection like Raw material identification, marking & cutting, fit-up, final weld visual, dimension check up,blasting, painting etc.
- Accountable for preparing NDT plan, seam-wise check list.
- Review subcontractors welding procedures and ensure compliance to the Client specification
- Coordinating for the preparation of project specific Procedures, Work Instructions and Quality Plans as required and issue as per the Subcontractor Quality System Procedures
- Coordinating with Management representative for Internal Quality Audits, Quality System and follow-up audits.

COMPANY NAME : JYOTI ENGINEERING CO.LTD , INDIA
Designation : Quality Control
Period : 18 Month
Project : NOCIL, Navi Mumbai
Job Profile :
- Fit-up inspection of weld joints.
- Preparation of daily welding reports.
- Interpretation of radiography films as per applicable code.
- Preparation QA/QC dossier as per client requirement.
- Coordination with NDT team at site.
- Monitoring of Preheating/ Post heating / post weld heat treatment and electrode backing activities.
- Inspection and testing of safety relief devices. Preparation of test pack and witnessing of hydro test.
- Interacting & coordinating with Clients for Quality parameters.
- Witness the Welding for establishing PQR for welding processes GTAW, SMAW.
- Witness the stage wise inspection like Raw material identification, marking & cutting, fit-up, final weld visual, dimension check up,blasting, painting etc.
- Accountable for preparing NDT plan, seam-wise check list.
- Review subcontractors welding procedures and ensure compliance to the Client specification
- Coordinating for the preparation of project specific Procedures, Work Instructions and Quality Plans as required and issue as per the Subcontractor Quality System Procedures
- Coordinating with Management representative for Internal Quality Audits, Quality System and follow-up audits.

COMPANY NAME : KIRAN ENGINEERING CONSTRUCTIONS, INDIA
Designation : Quality Control
Period : 2 Years
Project : Lubrizol India Ltd, Navi Mumbai
- Fit-up inspection of weld joints.
- Preparation of daily welding report Interpretation of radiography films as per applicable code.
- Preparation QA/QC dossier as per client requirement.
- Coordination with NDT team at site.
- Monitoring of Preheating/ Post heating / post weld heat treatment and electrode backing activities.
- Inspection and testing of safety relief devices. Preparation of test pack and witnessing of hydro test.
- Interacting & coordinating with Clients for Quality parameters.
- Witness the Welding for establishing PQR for welding processes GTAW, SMAW.
- Witness the stage wise inspection like Raw material identification, marking & cutting, fit-up, final weld visual, dimension check up, blasting, painting, etc.
- Accountable for preparing NDT plan, seam-wise check list.
- Review subcontractors welding procedures and ensure compliance to the Client specification
- Coordinating for the preparation of project specific Procedures, Work Instructions and Quality Plans as required and issue as per the Subcontractor Quality System Procedures
- Coordinating with Management representative for Internal Quality Audits, Quality System and follow-up
Audits

BLASTING, PAINTING (EXPLOSEDURE) :
AS QC INSPECTOR :
Before Blasting inspection
- Surface Condition
- Metal Temperature
- Weather Conditions by Whirling Hygrometer
- Grit Size and TC
- Wind force
- Compressor pressure
- Safety of blasting equipment

During Blasting :
- Pressure checking of compressor
- Grit condition in hopper
- Nozzle distance & Angle

After Blasting :
- Substrate preparation as per SIS 055900
- Profile checking by 1 ) profile needle gauge
2 ) Testex tape :
Before prime coat
- Surface condition
- Time period
- Paint technical data sheet

During prime cost :
- WFT
- Volume solids
- Weather condition

After prime cost :
- Drying and curing time
- DFT by elecometer
- Paint effects
During 2nd coat /mod coat :
- Same as Sr .No.

IT Forte :
- Well versed with :
- MS Office Tools (Word, Excel & PowerPoint)
- Internet Applications.
- Windows 2000, Windows XP, Windows Vista, Windows 7.

Personal Vitae
Date of Birth : 17st May, 1989.
Languages Known : English, Hindi & Odia.
Area of Interest : Oil and Gas Sector.

- Hobbies : Learning attitude

DECLARATION :
I hereby declare that all the information furnished above is true to the best of my knowledge.

Place : MUMBAI
Date :
KRUSHNA CHANDRA SAHU

[RIYAZ SHAIKH]

RESUME

PERSONEL DETAIL :
NAME : RIYAZ JAFFAR SHAIKH
NATIONALITY : Indian
MARITAL STATUS : Married
DATE OF BIRTH : 30-05-1964
LANGUAGES : English and Hindi can speak, read and write. Arabic can speak.

EDUCATIONAL DETAILS :
1. S.S.C.-1983 pass From The Maharashtra state Board of Secondary School, Pune
2. Higher Secondary Certificate – 1988 Detained from Premier College of Commerce & Arts, Bombay.
3. Diploma in Mechanical Draughtsman – 1984 from K.T.I. Bombay.
4. Certificate in Piping Draughtsman – 1986/87 from Academy of Technicians Bombay.

COMPUTER SKILL DETAILS :
1. Certificate in Computer aided Drafting (Auto Cad ) - 1993 from Academy of Technicians Bombay.
2. Certificate of Training in Microstation PC Ver-95 - 1997 from PI-Consult, K.S.A.
3. Certificate of Training in AutoDesk Inventor ver-7 – Dec 2004 from The Workstation Computer Education Bombay By AutoDesk Certify Center.
4. Certificate in PDS Aug.2009 From Design Technologies Consultants & Engineers, Mumbai

COMPUTER SOFTWARE : Working Knowledge in using software Auto cad, Microstation, Inventor-Ver-7, MS words, power points, Excel, Etc.
CAREER PROFILE : 20Years experience in mechanical / Piping Design and drafting ship related to variety of Industrial and Refinery, Petroleum Projects, Hands on Experience in Drafting & Designing of Piping, Mechanical & Electrical, Instruments, Process equipments, Power Transmission tower, Oil & Gas Industry Offshore & Onshore, HVAC, high rise Multistoried Building, fabrication detail dwg. Emphasis on structural design, detailing, checking, field inspection and on-site engineering. Ability to adapt in different environment and Changing circumstances. Ability to produce drawing in Auto-Cad System Release 12/14,2000 as well Microstation 95 V-SE, & AutoDesk Inventor ver7.3D module.
OBJECTIVES JOB : To coordinate various engineering services for commercial, infrastructure & industrial activities, according to Company policies & procedures. To study & analyses contract documents & drawings. works & any modification of shop-drawings and engineers for variations & claims. To provide technical guidance to CADD Operators to proceed with shop-drawings. and verify design data & drawings for project requirements. To coordinate with all Discipline Engineering services related to Project Engineering & Construction as a requirements (on going project). To maintain the quality of drawings & following company's procedures. And also Maintain standards of safety and comply with Company’s Health, Safety and Environment Management System. According to project facilities.
Core Skills and Strengths :
** Exposure to various Piping Codes and Specifications for SS and MS Piping
** Preparation of Plot Plan, Piping Layout in 2D and 3D Modeling.
** Preparation of Piping Isometrics, Bill of Materials & Bulk MTO
** Checking of GADs and Isometrics prepared by Draftsmen/ Modelers
** Project Management, Commissioning Assistance and Schedule Monitoring of Projects
** Knowledge of and experience in planning and organizing. and Confidence in own abilities and is motivated to deliver.
** Self Driven and ability to achieve immediate and long term goals and meet operational deadlines.
** Ability to As build rapport and relate to a wide range of projects.
** Good Communication Skills – Written & Verbal.
** Ability to learn quickly and result oriented. and Able to supervise and motivate design personnel.

EMPLOYMENT RECORDS :
EMPLOYER : Dayim Punj Lloyd. KSA.
PERIOD OF WORK : Aug 2012 to Feb 2013
DESIGNATION : Piping Designer
RESPONSIBILITY : Reporting to the Project Engineering Manger, responsible for preparation and development of Piping drawings such as:
As I my involvement in Piping Design, Yanbu Export Refinery Project SP-2 off site Pipe Line,400,000,(BPD),and 40.000mqu./hr.of cooling water,3.98KM.P/L, 2.9 M dia Sea water Supply and 2.1m Dia Sea water Return P/L.(GRP)Preparing MTO for.30’’ crude Pipe line and Export line 36’’ gasoline product P/L,24’’ Recireculation Gasoline P/L.12’’ Benzene P/L, over all routing plan dwg., Piping Plan, and same of changing dwg, as per site going on construction to modify the dwg. And reissued for IFC dwg. And I have to go site survey for P/L to get correct Northing and Easting co-coordinate and making bench mark .and I have to support construction team for further verify to get the actual site dim. Prepare construction pipe support dwg. for A/G and U/G P/L, ISO-dwg. Checking ,piping plan cross section detail dwg .ect

EMPLOYER : Techno-Chem Services Engg. Mumbai
PERIOD OF WORK : Sept. 2010 to Aug.2012
DESIGNATION : DESIGNER Piping ( HEAD of DRAWING DEPARTMENT)
RESPONSIBILITY : Prepare/Revise Equipment List for Mechanical/Piping
Prepare/Revise Basis of Design for Mechanical Piping,
Prepare/Revise Equipment Layout Study
My involvement in Equipment layout ,GA piping layout , Fabrication detail to make a sketch and give to cad draughtsman and cad operator and also Piping plan and clash checking and design review and update clarification with all inter discipline with Engineers/Project engineers/and manager and client according to with the help of Standards and also produce fabrication details Dwgs. Like Heat Exchanger and Reactors , column, Tank, Re boilers, Receivers Detail drawing .Pipe Support dwg and also produce isometrics dwg.MTO, Auto cad 2007/8/9

EMPLOYER : Brunel Energy LLC Dubai
PERIOD OF WORK : April. 2010 to June. 2010
DESIGNATION : DESIGNER Piping
RESPONSIBILITY : Prepare/Revise Equipment List for Mechanical/Piping
Prepare/Revise Basis of Design for Mechanical
Prepare/Revise Equipment Layout Study
I assign short time work with Passvant Roediger FZN on going Projects Weast Water Treatment System in Fujairah UAE . My involvement in pumping station and Equipment layout design in weast water system As Built Dwg. Chlorination plant bulid Mechanical Layout & Section , P&I Diagam ,Area piping. Produce As Built Dwg, Piping Plan and Clash checking and design review. Review & finalization of the Plot Plan and Layout in accordance with statutory and Din standards. Review and finalization of Pump Station,Piping Plan. Produce Underground Piping arrangements studies. Produce Piping Isometrics and MTO’s , Using a design software’s :2D, Auto Cad 2007

EMPLOYER : Design Technologies Consultants & Engineers, Mumbai
PERIOD OF WORK : Aug. 2009 to Sept. 2009
DESIGNATION : PDS DESIGNER
RESPONSIBILITY : I assign part time Basis work on going Projects in Mumbai. My involvement in Equipment layout design in SUR system Area piping. Produce Piping Plan and isometric and MTO’S, and Clash checking and design review. Review & finalization of the Plot Plan and Layout in accordance with statutory and standards. Review and finalization of Piping Plan. Produce Piping arrangements and Nozzle orientation studies. Complete Piping and Equipment PDS modeling. Produce Piping Isometrics and MTO’s , Using a design software’s :PDS (Plant Design System)

EMPLOYER : SNC-Lavalin B.V. Europe
PERIOD OF WORK : Sept. 2007 to Jun 2009
DESIGNATION : PIPING DESIGNER
RESPONSIBILITY : I work and on going Aramco Projects in KSA. My involvement in Yanbu Refinery Crude Distillation unit project.wer016,and also I am preparing as EPC Jubail Export Refinery Project.(LSTK) Bid and estimated with new and Existing Projects, and Gas Compression NGL Khafji Projects to prepare facility plot plan and facility equipment layout and piping plan NGL shipping Pump, Fire Hazardous Area Classification, piping plans Scraper launcher, Replace Platformer Heater upgrade process and utility Tie-Ins, for Riyadh Refinery piping plan & Detail Area –E18,19,piping plan Vessel and piping plan Pump and Heater, and Isometric dwgs , Mainly I am preparing a Preliminary Piping Design a piping plan, pipe routing layout design in Tank age system Area piping and utility area piping, Produce piping isometric and MTO’S, jetty modification and Clash checking and design review. project Dr-1 Pipe line, Dhahran bulk plant, tank age system,det. Tie-in Detail, Review & finalization of the Plot Plan and Layout in accordance with statutory and Aramco standards. Review and finalization of Piping Plan and Detail, Produce Piping arrangements and Nozzle orientation studies. Preparation of sleeper schedule and detailed design. Detailed Piping design for large and small bore piping. Complete Piping and Equipment Microstions modeling. Produce Piping Isometrics and MTO’s Piping support location, identification, design & markup, Using a design software’s : Microstaion, 2D,

EMPLOYER : TECHNIP ABU DHABI
PERIOD OF WORK : Nov 2006 to Mar 2007 ( Short Term )
DESIGNATION : PIPING DESIGNER CAD
RESPONSIBILITY : I assign to work with Total ABK projects, as a PIPING DESIGNER, I am Involvement in Offshore Khuff gas project, to checked the isometric and P& ID and GA layout to verify the line no and tagging Tie-In and make a new dwgs Piping Plan, Isometric, production platform and GL platform project dwg ect. Using a design software’s : 2D, Auto cad 2002, Microstaion,

EMPLOYER : LEIGHTON CONTRACTOR INDIA PVT. LTD. MUMBAI
PERIOD OF WORK : February 2006- Nov ’ 2006
DESIGNATION : PIPING DRAUGHTSMAN CAD
RESPONSIBILITY : I assign to work with as a Mechanical/piping draughtsman. I am Involved in the NOKIA & KRL & RIL Refinery plant, project Continuous Catalyst Regeneration (CCRY) & Light Straight Run Naptha , Piping Plan and Isometric dwgs, and Pipe rack layout section and detail dwgs, Cross county pipe line Plan and profile dwgs, jetty modification and Clash checking and design review. Section detail for Jetty pipe laying, ECT. Using a design software’s : 2D, Auto Cad 2000

EMPLOYER : CONSOLIDATED CONTRACTOR COMPANY WLL. KSA
PERIOD OF WORK : February 2005 – Oct ’ 2005
DESIGNATION : CAD MECHANICAL/PIPING Design (DRAUGHTSMAN)
RESPONSIBILITY : I assign to work with as a Mechanical/piping draughtsman. I am Involved in the Saudi Aramco Refinery plant Yanbu, Expansion project Continuous Catalyst Regeneration (CCRY) & Light Straight Run Naptha (LSRN), Piping plan GA dwg. Pipe rack support, Equipment layout dwg. And P&I diagram for waste heat boiler,& W.H.B blow down system, water injection, ccr platform unit, LPG saturated gas concentration unit. feed gas cooling, Propane Absorber, Utility flow diagram of fuel system, making isometric dwg. Bill of material P&ID for spent caustic neutralization for LSRN, LSRN hydro treater unit, fire protection system, LPG uop merox unit, LPG Marox, naptha unit, CCR Platfromer unit, ect,. Also to make modification the line crude Oil & LPG preparation dwg. Sea water system iso dwg. And construction dwg. And fabrication spool dwg. For fabrication shop. Using a design software’s : Microstaion, 2D,Auto cad 2000

EMPLOYER : SONADIETS SERVICES S.A. ( Monaco, Panama )
PERIOD OF WORK : January 2004 –June ’2004
DESIGNATION : CAD DESIGNER DRAUGHTSMAN
RESPONSIBILITY : I assign to work with algoa international services Angola. I am Involved in the offshore, Oil & Gas preparation of oil field drg. The Offshore hookup construction, offshore Tlp 15, Drill deep see water 15 & 18 sect., Flare boom gas line modification for Pride Africa, Pipe rack support, LPG saturated gas concentration unit, Valve operation steel platform det. & Scraper Area structural steel platform, Involving in the preparation of steel structural drawings as per fabrication. code ASME section VIII Div. 1, Pin & box dwg. Making a new and old containers, fabrications dwg. Fuel gas Turbine dwg. Pride Africa and other clients like Halliburton, Cameron, Esso. ABB Schlumbreger,. Using a design software’s : Microstaion and 2D,Auto cad 2000,,AutoDesk Inventor ver-7

EMPLOYER : PETRO-INFRASTRUCTURES ENGG.CONSULTANTS CO. Saudi Arabia
PERIOD OF WORK : September 1997 –June ’2003
DESIGNATION : Sr. MECHANICAL/PIPING DRAUGHTSMAN ( CADD)
RESPONSIBILITY : Involved in the preparation of industrial & infrastructures several type of Worked in major project from our Saudi Aramco, Secco, ABB, Nalco, Barry Gas Plant, Shell, Sasraf, Zamil, Ibn Zahar & Sceco & other private client. As like Oil & Gas offshore & onshore, Piping plan, Pipe rooting layout, Isometric, P& ID, Utility flow diagram of fuel system, pipe bridge & Fnd. Det, valve operation platform Det, Instrument point & line Diagram, Cable block diagram digital NGL-3 P/L Compression & Deeth’ing plant Abqaiq, Inter connection Diagram NGL-3 P/L, Instrument loop diagram Qa-10 NGL-c3 P/L, Hydrostatic test diagram 30”UA-1& 36”UA-3 P/L, Instrumentation & Electrical works for Haradh Water Injection wells. Field Instrumentation & Cathodic Protection system Instrumentation-Interfacing thru Radio Telemetry to Remote Control Stations & PI systems to Dhahran to gather well data. Installation of Switch Racks, RTU & Field Instrumentation for monitoring Well head Pressure, Water Flow, Temperature, Back up Fuel Gas System for South Steam Plant at Abqaiq. Prepared a complete Design Package to Install a Back-up Fuel Gas Line to Steam Plant100.Pressure Control Systems, ESD Systems, Lighting, Power & Associated Fire and Safety System. RT Terminal Tanks-2504/2505 Instrumentation Upgrade. Upgrading the Tank Level Gauging system, Instrument loop diagram, Instrument Installation Schedule, Inter connection diagram, Plan & Profile 40”QA-6 tie-line pipe line Qatif, Process flow diagram for pump shed piping layout, Electrical area Classification day light P/L QA-10 scraper launcher Area, scope of work, crude & sour flow pipe line, well head pipe detail, & cross country pipe line etc. system consist of many mechanical, electrical & electronic components such as motor, compressor, pump, fan, pipe conduit, thermostats, and switches throughout the entire system. ASME B31.3, ASME B31.8, API 600, also steel structural Dwg. Pressure vessel, Heat exchanger, receiver, storage roof tank, Weld joint detail, as per ASME Sect. viii Div.1., also using Saudi Aramco, & Shell std. Using a design software’s : Microstaion and 2D,Auto cad 2000

EMPLOYER : M.M. GHAMDI & PART. COMPANY. Jeddah, Saudi Arabia
PERIOD OF WORK : April’1994 to April’1996
DESIGNATION : MECHANICAL DRAUGHTSMAN (CAD)
RESPONSIBILITY : Involved in the preparation of different kinds of drawings like home and industrial project drawings, hospital, hotel, kitchen exhaust hood, wall type and island type, HVAC layout and fabrication of duct, SS table, sink SS & cabinet, SS wall cabinet, food warmer, cold pan, service trolley, fryer etc. Using a design software’s : Auto cad

EMPLOYER : VADILAL DAIRY INT’L LTD. Bombay, India.
PERIOD OF WORK : August’1993 to April’1994
DESIGNATION : MECHANICAL DRAUGHTSMAN
RESPONSIBILITY : Project design drawings of Dairy Food industries, milk dumping station, plot plan Equipment layout, Piping plan & Detail drawings sections & elevation of Equipment Drawings & fabrication at vessels & detail drawing chiller plan layout & HVAC systems consist of many mechanical, electrical, and electroniccomponents such as motors, compressors, pumps, fans, ducts, thermostats,& switches. In central heating systems, Detail drawing Boiler room drawing P & ID &Flow diagram drawings. Etc.& Steel structural dwg and fabrication detail dwg. As per ASME Sect. viii Div-1.

EMPLOYER : CHEMI PLANT ENGINEERING CO. Bombay, India
PERIOD OF WORK : July’1990 to July’1993
DESIGNATION : MECHANICAL DRAUGHSMAN
RESPONSIBILITY : Preparing design drawings of several types of chemical process of Equipment Design, as like gas, air-dryer, feed water heater, pressure leaf filter ,reactivation cooler, pressure vessel, boiler, tema-C & R class heat-exchanger, pressure drop as per client requirement column, receiver reaction vessels, coating pan mixture, ribbon mixture drawings, drawn mixture drawings, coil type, anchor, turbine, impeller etc. storage roof tank, Involving in the preparation of steel structural Design as per fabrication. Code ASME section VIII Div.1.and TEMA Class C&R

EMPLOYER : M/s. KSBe ENGG. IND. P. LTD. Bombay, India
PERIOD OF WORK : August’1988 to Jun’1990
DESIGNATION : MECHANICAL DRAUGHTSMAN
RESPONSIBILITY : Making project design drawings of dust formulation plant, plot plan, pumping station drawings, piping layout plan, P & ID diagram, flow system diagram, foundation for pipe rack, footing layout drawing, plant equipment layout. Section drawings for equipment elevation and equipment detail, like pressure vessels, reaction vessels, receiver, condenser, agitator anchor type, reaction vessels and detailing drawing TEMA-C & R class heat exchangers detail drawing, steel structural design, fabrication code :ASME Sec. VIII Div.1.

EMPLOYER : M/s. FIXWELL INDUSTRI ENGINEERS Bombay, India
PERIOD OF WORK : June’1985 to July’1988
DESIGNATION : MECHANICAL DRAUGHTSMAN
RESPONSIBILITY : Work in design office knowledge in process of Textile M/C. I was connected with quality control department (Inspection Dept.) responsible for producing drawings of general layout of Textile M/c Assemble, structural steel drawings detail drawings boiler tank etc.

Training Facility : Training and Teaching in Piping Diploma courses, Dimensional Academy Engg. Collage Mumbai in April 2012 (Part time)
ACHIEVEMENT: I was connected with quality control department (Inspection Dept.)
TRAINING & SAMINAR : QA & QC Attend Program in KSA (Years 2000)
SPORTS: Well played Cricket, Foot ball and Chess
HOBBIES : Reading Books, News paper and Collecting Postal Stamp in different country.

This is to certify that the above information is true and correct to the best of my knowledge and belief.
RIYAZ SHAIKH
Signature