FALAH ENGINEERS SOLUTIONS Bahrain, Doha, Kuwait : INDUSTRIAL SAFETY OFFICER

[mskavi]

FALAH ENGINEERS SOLUTIONS PVT LTD Bahrain, Doha, Dubai/ UAE, Kuwait, Oman, Qatar, Saudi Arabia : SAFETY OFFICER

Website: http://www.falahengineers.com

Designation: SAFETY OFFICER
Experience: 0 - 5 Years
Location: Bahrain, Doha, Dubai/ UAE, Kuwait, Oman, Qatar, Saudi Arabia

Job Description:
This course covers entire domain knowledge in INDUSTRIAL SAFETY MANAGEMENT.
This Course is Designed to cater the industry Specific needs of
INDUSTRIAL SAFETY.
Scope for a Career in Industrial Safety Management Abroad:
After completing Industrial Safety Management Courses, one can work as a safety officer in countries like UAE, Oman,Saudi Arab,Qatar,Kuwait,Bahrain etc

The min Qualification is 10+2/GRADUATION in any desciplines whoever wish to make their carrier in the specific field mentioned above.

The Course Is Conducted at the following Address: "FALAH ENGINEERS SOLUTION"
301,3RD Floor, Pratap complex,near munirka bus stand,Munirka,New Delhi.
email:adil@falahengineers.com or mhs@falahengineers.com

Excellent Course material is provided with placement Assistance.

we suggest you to go thru our website, www.falahengineers.com(currently under maintenance).

Duration Of course 80 Hrs. - 3 month course(Saturday & Sunday)4pm-8pm.

We provide excellent course material.

Our Faculty has worked at various levels in India & Abroad.

The course fee is Rs.12000/- + service taxes.

COURSE SYLLABUS.

1.FUNDAMENTALS OF INDUSTRIAL SAFETY.
2.JOB HAZARD ANALYSIS.
3.USE OF PERSONAL PROTECTIVE EQUIPMENTS.
4.SCAFOLDING SAFETY.
5.CONSTRUCTION SAFETY.
5.ELECTRICAL SAFETY.
6.MECHANICAL SAFETY.
7.CIVIL SAFETY.
8.FIRE SAFETY.
9.PERMIT TO WORK.
10.SAFETY IN DIFFERENT INDUSTRIES.

Desired Candidate Profile:
Min Qualification is 10+2/GRADUATION in any desciplines whoever wish to make their carrier in the specific field mentioned above.

Keywords: SAFETY , INDUSTRIAL SAFETY , HSE, SAFETY OFFICER

[Guest]

CURRICULUM VITAE
IMRAN KHAN
Email :imrankhan_khan1981 AT yahoo.c.in

Personal Information :
Date of Birth : 13 January, 1981
Gender : Male
Nationality : Indian
Marital Status :Single
Religion : Islam
Language Known : English, Hindi & Urdu

Objective :
Safety Supervisor– more than 5 years experience as safety supervisor – offering the challenge and responsibility that commensurate with skill, experiences and delivers zero accident performance.

Technical Qualification :
- Diploma in Fire and Safety Management
- Diploma in Computer Application (Ms Office Software)
- Fire Fighting certification course

Academic Qualification :
- B.A from Magadh University, Gaya
- Intermediate from BIEC Patna
- 10 th from BSEB Patna

WORK EXPERIENCE :
Present Employer : Shahzad A Azeemi, Engineers and
Contractors, AMU, Aligarh
Period : May 2007 to Continue
Previous Employer : National Construction Company NEW DELHI
Period : Jan 2004 to March 2007
JOB PROFILE :
- Implementation of management Safety policies & procedures.
- Inspection of advanced fire fighting equipment (Sprinklers, Fire Hydrant system and all types fire extinguisher system.
- First Aid and emergency proceeding.
- Familiarized safe handling of compressed gas cylinders.
- Inspection all flame proof electrical equipments.
- Preparation of Hazards identification and risk analysis for site activities.
- Site preparation for startup of project activities.
- Conducted daily tool box meeting, minutes of meeting and HSE weekly and monthly meeting.
- Carry out inspection of construction site and advice on various HSE issues to construction team.
- Conduct Risk assessment and take necessary safety precaution before Implement of Work permit System
- Accident investigation analysis & maintenance of record.
- Implement of Work permit System
- Monitoring heavy lifting operation.
- Site layout inspection and house keeping.
- Crane inspection, permit traffic control and safety rules.
- Familiar with H2S gas, other toxic gas and chemicals.

AVAILABILITY : Immediate as per the requirement of the employer.
- Well experienced in construction works involving activities like : a) Excavation, b) Masonry works, c) Scaffoldings, d) Hot work like welding, metal cutting, e) House keeping
- Removal of wastage and other combustible items from site.
- Maintenance safe working area.
- Conducting seminars, orientation for newly hired employees, research and studies for the improvement of the safety in the project.
- Confined space entry.
- Book keeping filling and editing.

SKILLED AREAS :
- Advanced Fire Fighting
- First Aid
- Major safety program
- Construction Policy
- Industrial Safety
- Safety at the Hot works
- Detection of Hazardous gases
- Food Safety
- General safety as required situational

COMMITMENT :
I. I individually manage the assigned work place to convert as safe working area.
II. 100% committed to achieve zero accident performance at every assigned work place.
III. I can develop friendly and health environment with all types employees and identify maximum possible existing and predictable hazard and eliminate them in a quick span of time. Arrange the training to all employees in regard the
usage of suitable personal protective equipment (PPE) depend upon the type of work hazards involved.
IV. Inspect all the tools, equipments, machines before use, check is good condition Inspect all the tools, equipments, machines before use, check is good condition.
V. Inspect all the tools, equipments, machines before use, check is good condition Inspect all the tools, equipments, machines before use, check is good condition.
VI. Familiarized with the safety programme like safety inspection, safety audits, hazards analysis, risk assessment, accident investigation reports work permit system and advance fire control system.
VII. Achieving zero accident performance and reaching to a stage of safety manage with excellent track record.

Job Responsibility :
- Ensuring that newly joined workers/labors are given safety induction before they start work
- Providing tool box talks prior to start of work
- Fulfilling safety requirements for working by ensuring that safety checklists are maintained at site as per requirement.
- Good and safe working environment for all workersincluding use of personal protective equipments and safety devices
- Observation of unsafe act/conditions at site
- Maintaining all types of documents as per client'srequirement

DECLARATION :
I hereby declare that all the above information are true and the best of my knowledge and believe.
IMRAN KHAN

[Guest Poster]

Renjith R
renjithshivam AT hotmail.com

Application for the Post of Safety Officer
To obtain a position of responsibility utilizing my skills and educational qualification to complement those acquired through work experience.

Date of Birth : 29 August 1982
Nationality : Indian
Languages Known : English, Arabic & Hindi

Educational Details :
B.Com (70%)
Fire & Safety Engineering (NIFE, India)
OSHA (Occupational Safety & Health Administration) under Labor Department US Government
Certificate in computing (G-TEC Computer) Windows, MS Office package, Internet)

Professional Experience :
A. Saudi Arabian Chevron –Main Cont. Al Hamad Co Mina Al Zoor – Oil & Gas Service (Marine Division) -- Safety Officer
(Chevron is one of the world's largest integrated energy companies. The company is engaged in every aspect of the crude oil & natural gas industry including exploration, production & marketing, chemical manufacturing & power generation)
Duties :
- Advising Safety aspects to the required standards in all job related to safety
- Advising for preparing appropriate safety requirements for inclusion in work method statement including personal protective equipments.
- Ensuring proper Maintenance, Calibration and Operation of all safety equipments.
- Ensuring site security fire, First Aid and welfare facilities and procedures and appropriate to works are provided and properly maintained.
- Ensuring all safety standards and applicable regulations are applied.
- Carry out and record safety inspections at site.

B. Consolidated Contracting Co. (CCC) -- Safety Officer
(One of the oldest & reputed company in the field of civil construction & power generation which is an Italian based company conducting business in many countries including Middle East. In Kuwait they are concentrating in the substation works)
Duties :
- Identification, Monitoring & Control of Project Hazards and Risks
- Coordinate emergency procedures, Fire fighting & First Aid Crew
- Ensuring proper Maintenance, Calibration and operation of all Safety Equipments & Machineries (Water tender, Fire Extinguisher)
- Conduct training sessions for management, supervisors and workers of Health & Legislation & Daily Tool Box Talks.
- To maintain discipline among workers under control, evaluating quality and cost of the jobs advising on potential hazards at work site.

COVERING LETTER
To
Human Resource Department
Sub : Application for the post of Safety Officer
Dear Sir,
I would like to apply for a suitable opening in your organization based on my qualification and experience. My resume is attached herewith for your kind reference.
I have around 3 years experience in this field in Kuwait and have undergone through knowledge of the same.
I am presently with MS Saudi Arabian chevron for Al-Hamad company and over the period of my work I have gained a fair knowledge of Kuwait working environment.
I can assure you that based on my experience; I can bring out my best for your company. I believe my organizational skills and experience will enable me to contribute positively to achieve your Company objectives.
I look forward to receive an interview call at the earliest.
Thank you for your time and consideration.
Regards
Renjith R

[Guest]

RESUME
AHILESH . S,
Email.ID :ahilesh.slad AT gmail.com

Career Objective :
As a person adaptable for all safety concerns on any environment. I foresee myself as an effective contributor to any organization in its endeavor to safety and success. I possess the interest, capacity and motivation to play an effective role in the organization I work for. I am seeking a position as a safety officer in a very challenging environment.

Safety Qualification Summary :
- Maintained all safety procedures and norms effectively.
- Processed strong knowledge in the field of Fire and Safety.
- Implemented safety measures & effective strategies to reduce risks and hence improved safety.
- Strong knowledge of safety procedure ( OSHA and NEBOSH standards)
- Handled highly hazardous chemical products carefully and successfully.

Technical Qualifications :
- Diploma in Fire and Safety engineering from NIFE.
- OSHA Certified.

Academic Qualification :
- Completed a Diploma in Fire and Safety Engineering from NIFE under sikkim manipal university.
- Higher Secondary Certificate from Tamilnadu board of general education.
- Secondary school leaving certificate from Tamilnadu board of General Education.

Personal Skills:
Optimistic and Commanding attitude and ability to tackle problems efficiently.
Strength :
Possess excellent analytical skills & theoretical knowledge with ability to learn faster.

Experience :
1. Worked in m/s .Sathiapal, Engineers (India) ltd, Kilpak, Chennai – 600 010.
2 . Worked in GS ENGINEERING WORKS Plot No . 41, Parvathy Nager, 3rd cross, VGP , Srinivasa avenue, Madambakkam, Channai – 73.

[Guest]

BIBIN.D.JERALD
E-MAIL :bibin.me.eee AT gmail.com.
LANGUAGES KNOWN :

- English.
- Tamil.
- Malayalam.
INTERESTS AND HOBBIES :
- Hearing music
- Playing volley ball
- Cricket
- Badminton
COMPETENCIES :
- Good team player.
- Hard working.
- Honest and Sincere.
- Expecting peace in work OBJECTIVE :
- To be one among the best with innovative ideas, use ideas to the maximum extant in completing the assigned tasks.
- To work in a challenging environment and be known for depth of knowledge, hard work, quality and timeliness of service, honoring the commitments.
EDUCATIONAL QUALIFICATION :
DEEE :
Dipolma : SUN Polytechnic
College ,
Nagercoil,
KK(dist).
Year : 2007-2009
Percentage of marks : 82.5

Under Graduate : BE EEE:
Bachelor Of Engineering : JKK MUNIRAJRAH COLLEGE
OF TECHNOLOGY

Year : 2009-2012
Percentage of mark : 7.69(CGPA)
Diploma in fire and safety :
IIFE
Year :2011-2012
COMPUTER SKILLS :
- Microsoft office.
AREA OF INTEREST :
- Renewable energy
- Design&Fabrication
CERTIFICATES :
- Attended one days national level workshop on RESENT TRENDS IN POWER QUALITY & POWER SYSTEM MAINTENANCE in Sasuri College of engg, Erode.
- Attended A national level technical symposium Marthandam college of engg, kuttakuli,kk(dt).
PROJECT DETAILS :
DIPLOMA :
- Fifteen way intercom.
B.E :
- Microbial fuel cell.

DECLARATION :
I hereby declare that the above information is true to the best of my knowledge.

Yours faithfully,
BIBIN.D.JERALD
Date : 20-04-2012.
Place : Swamiyarmadam.

[Unregistered]

RESUME
G.KARTHIK
email : vishunkarthik243 AT gmail.com

Career Objectives :
To obtain a challenging position in an organization and prove a hard worker working dawn to dusk for the dignity and development of the company by enhancing my skills and experience as well like to be working in critical situation in ship at anytime.

Summary :
** Enthusiastic, self-confident and, self-motivated.
** Quick learner, very adaptive and flexible to any work environment.
** Has a good communication skill and committed to quality.

Academic qualification :
COURSE INSTITUTION/COLLEGE BOARD OF STUDY YEAR PERCENTAGE :
DFSE NATIONAL INSTITUTION OF SAFETY ENGINEERING MAYILADUTHURAI 2011-2012 A+ grade
D.E.E.E ELUMALAIYA POLYTECHNIC COLLEGE KOLLUMANGUDI STATE BOARD 2007-2010 74
H.Se., GOVT.HIGHER SECONDARY SCHOOL KOMAL STATE BOARD 2005-2007 50
S.S.L.C K.S.O HIGH SCHOOL MANGANALLUR STATE BOARD 2004-2005 50

Computer skill :
** Working with window operating system
** Internet

WORK EXPEREANCE :
EMPLOYER : SUJA SHOEI INDUSTRIES PVT. LTD., At 52,Villiyanallur
POST : Site in charge, office work, Hazardous Maintaining
AREA : Electrical & Mechanical Maintenance and Safety Maintenance

RESPONSIBILITY :
** Maintaining Audit records
** Maintaining TNPCB report
** Maintaining plant water consumption
** Maintaining Daily Machine Breakdown Reports.
** Maintaining monthly breakdown report
** Maintaining HAZARDUS & NON HAZORDUS materials
** Synchronization OF GRID Main power WITH DG Power.
** Working in Star-Delta Starter and DOL Starter.
** Working in HIGH & LOW RATING INDUCTION MOTORS.
** Working in PLC’s.
** Working in TEMPERATURE INDICATERS USE IN HYDRALIC PRESS FOR MEASURING TEMPERATURE.
** Working in up to 380 kva DG sets.
** Maintain battery and charging.
** Working in hydraulic machine.
** Working in hot air oven.
** Maintaining the safety equipments
** Maintaining daily & monthly accident Report

TRAINING & SEMINARS DONE DURINR THE SERVICES :
** FIRST AID
** FIRE SAFETY
** ELECTRICAL SAFETY
** DRIVING

PERSONAL PROFILE :
Name : G.KARTHIK
Father name : R.GOVINDARAJAN
Date of Birth : 30.june.1989
Gender : Male
Nationality : Indian
Language Known : To Speak & Write (Tamil, English)

DECLARATION :
I hereby declare that the above information is true to the best of my knowledge and belief.
PLACE :
DATE :
(G.KARTHIK)