Piping Engineer Layout, Stress Analysis Delhi, Gurgaon : Procon India Pvt Ltd

[Admin]

Procon India Pvt Ltd Delhi/NCR, Gurgaon : Piping Engineer with Layout & Stress Analysis

Website: http://www.cairnindia.com

Keywords: Piping Stress & Layout Engineer

Designation: Piping Engineer with Layout & Stress Analysis
Experience: 7 - 12 Years
Location: Delhi/NCR, Gurgaon
Education:
UG - B.Tech/B.E. - Mechanical
PG - M.Tech - Mechanical
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 07 Feb

Job Description:
Should be able to identify lines to be stressed, identify the stress systems and rate the criticality of the systems and perform stress analysis using CAESAR II software to relevant ASME codes.

Desired Candidate Profile:
Work in close co-ordination with the layouts / 3D modeling group and liase with Civil / Structural for support loadings. Should have worked in a diverse environment

Company Profile:
We are assisting our gurgaon based client to meet their manpower requirement.You are welcome to visit their website.

Executive Name: Rashmi

Address:
Not Mentioned

Email Address: ij.singh@proconindia.com, rashmi@proconindia.com

Telephone: Not Mentioned

Reference ID:
PSE-13-01-09

Keywords: Piping Stress & Layout Engineer

[Guest]

PRAVEEN GARG

E-Mail : praveen.visit AT gmail.com

CAREER OBJECTIVE :
Seeking a position with a dynamic organization that provides me with the opportunity to apply my educational and creative skills which I have acquired, and challenges me to expand my field of knowledge and to make a meaningful contribution.

WORK EXPERIENCE

Engineer (Mechanical-Piping) : Project and Development India Limited, Baroda (PDIL), India, August 07-Till date

Company profile :

PDIL, an ISO 9001-2000 certified company, is a leading design engineering & consultancy organization having experience of over 40 years in design, detail engineering, procurement, project management, construction supervision & commissioning of fertilizer & allied chemical, refinery, oil & gas & power projects.

JOB RESPONSIBILITIES :

- Familiar with International Design Codes such as ASME B 31.3, ASME B31.1 & other
Standards for various piping component such as valves, pipe fitting, flanges etc.
- Preparation of plot plan & equipment layout.
- Review of piping material specification
- Preparation and checking of piping general arrangement drawing & isometric drawing.
- Preparation of Bulk MTO from P&ID as well as isometrics basis.
- Preparing cost estimation.
- Preparation of enquiry documents of various piping component such as valves, flanges, fittings, gaskets, steam trap, spring support etc. & evaluation of technical offers.
- Preparation of IBR documents i.e. IBR thickness calculation as per IBR reg. 350, Preparation of steam network.
- PT rating calculations, condensate loads calculation, hydro test pressure calculation as per ASME.
- Preparation of Nozzle & Platform orientation drawings.
- Preparation of pipe support schedule.
- Checking of vendor drawing.
- Coordination with client & other department.
- Flexibility/ stress analysis of piping using CAESAR.
- Selection of Support & its Position


IT SKILLS :

Software- 3-D : Smart Plant Review, CAESAR 5.2.
Software- 2-D : Micro station Ver 7.0, Auto Cad.
Packages : Windows, MSOffice, Internet Explorer, DOS.


PROJECTS HANDELED :

- Project : 525 MTPD methanol project, GSFC, Vadodara.
Responsibilities :
- Preparation of plot plan & equipment layout.
- Review piping material specification and creation of piping physical data library.
- Preparation of tie in point detail as per process requirement.
- Review of piping general arrangement drawing & isometric drawing.
- Preparation of Bulk MTO from P&ID as well as isometrics basis.
- Preparation of enquiry documents of various piping component such as valves, flanges, fittings, gaskets, steam trap, spring support etc. & evaluation of technical offers based on the enquiry documents.
- Preparation of IBR approval documents such as thickness calculation, steam network.
- Preparation of pipe thickness calculation, hydro test pressure as per ASME B31.3.
- Selection of steam trap and condensate load calculation.
- Preparation of support schedule.
- Review of Nozzle & Platform orientation drawings.
- Checking & approval of various equipment vendor drawings i.e. compressor, pumps, exchanger, column etc.
- Co-ordination with inter department and client.

- Project : Trombay Methanol Revamp, Rashtriya chemical fertilizers (RCF), Trombay, Mumbai.
Responsibilities :
- Review piping material specification and creation of piping physical data library.
- Review of piping general arrangement drawing & isometric drawing.
- Preparation of Bulk MTO from P&ID as well as isometrics basis.
- Preparation of enquiry documents of various piping component such as valves, flanges, fittings, gaskets, steam trap, spring support etc. & evaluation of technical offers based on the enquiry documents.
- Preparation of IBR approval documents such as thickness calculation, steam network.
- Preparation of support schedule.
- Checking & approval of various piping component vendor drawing such as valves, spring support, steam trap, strainers.


- Project : Ammonia syn gas generation plant, GNFC, Bharuch.
Responsibilities :
- Review of plot plan & equipment layout.
- Review of piping material specification and existing G.A. Drawings.
- Review of 30% and 60% piping model using smart plant review.

- Project : LPG & Propylene Bullets, IOCL, Haldia
Responsibilities :
- Preparation of piping general arrangement drawing & isometric drawing.
- Preparation of Bulk MTO from P&ID as well as isometrics basis.
- Preparation of support schedule.

EDUCATIONAL CREDENTIALS :

M.E in, Thermal Engineering with 74.5% from (DCE) Delhi College of Engineering in the period of 2006 to 2008.
B.E in, Mechanical Engineering with 64.2% from (ECK) Engineering College Kota in the period of 2001 to 2005.


PERSONALITY STRENGTHS :

- Possess a flexible, learning & detail oriented attitude.
- Hardworking & sincere with good communication skills & an ability to deliver the goods.

DECLARATION :

I hereby declare that the above information given by me is true & correct to the best of my knowledge & belief.

Date :
Place :

(PRAVEEN GARG)

[Guest]

SENTHIL KUMAR .A

Email.yaasenthil AT gmail.com


.PROJECT- INCHARGE
Accomplished, seasoned manufacturing engineer with a piping background in design, layout, and details for products, tooling /fixtures and special machinery. Piping management capabilities with a consistent track record of anticipating consequences of new designs, initiating solutions, and completing projects to specification in the first attempt. Detail driven with outstanding
Communication skills and proven success interfacing with co–workers. Assumes mentor role and interacts well with diverse personalities. Technically skilled in the following software
- AutoCAD 2006 (Drawing & Programming )
- Certified in Level ll Testings, (Dye penetrate Testing, Radiograph Testing & Magnate Testing)
PROFESSIONAL EXPERIENCE
Worked : INDIAN TOBACCO CORP. LTD., CHENNAI
Designation : PROJECT ENGINEER from NOV 2003 to May 2005.
Profile :
- Oil Separating
- MCW (Maximum cooling water Line)
- ACW (Auxiliary cooling water) 300NB
- CTMW (Cooling Tower Minimum Water )
- Raw Water Line 700 NB - Steel Line 700 NB

Worked : SRF POLYMERS PVT. LTD., CHENNAI.
Designation : PROJECT ENGINEER from JUNE 2005 to JAN 2007

Profile :
-
- De - Poly
- MRP ( Monomer Recover Plant )
- BP ( Batch Poly )
- EP (Engineering Plastic )
- Thermic fluid Boiler for all process
Worked : MATHUKON SUGAR & POWER INDUSTRIAL PVT. LTD.,
Designation : PROJECT ENGINEER from FEB 2007 to OCT 2007.

Profile :
- D.M Water Tank (600 Cube)
- Makeup Water Tank (600 Cube)
- MCW (Maximum cooling water Line)
- ACW (Auxiliary cooling water) 300NB
- CTMW (Cooling Tower Minimum Water )
- Raw Water Line 700 NB - Steel Line 700 NB
Worked : L & T ECC LTD., JAM NAGAR, GUJARAT
Designation : PROJECT ENGINEER from NOV 2007 to July 2009
Profile : Isometric Drawings, Loop Clear, Planning
- RELIENCE REFINERY PROJECT
- SHUTDOWN PROJECT (Equipments erection piping ) 1 month
Worked : L&T ECC LTD, VIRAMGAM, GUJARAT
Designation : PROJECT ENGINER from August 2009 to August 2010

Profile : BSPL [BARMAR TO SALAYA PIPE LINE PROJET]
- Fabrication, Erection, I so clearance, hydro testing
Worked : CHENNAI PETROLEUM CORPORATIN LIMIT CHENNAI
Designation : PROJECT ENGINEER
- SHUTDOWN PROJECT (IN PIPING 6 MONTH )
- ISO clearance &Loop clearance
- Acid cleaning & Pickling
- Hydro Testing
- Commissioning Activities
RESPONSBLITIES
- Knowledge for a DPT in pipe fabrication
- Lay out preparation for process & Utility Equipments./Machines
- Vendor Evolution for fabrication of process Equipments.
- Preparation of BOM and detailed specification for fittings & valves.
- Erection and commissioning of all process & utility Equips/Machines
- Communication with vendors for processing Equips/Machines
- Preparing Engineering flow diagram for all plants

Worked : TITANIUM TANTALUM PRODUCTS LTD CHENNAI
Designation : PROJECT INCHARGE- June 2010 to till date
- Man power controller
- Material follow up and document preparation
- Planning & Designing
- Lay out Preparations
- To reporting day to day activities
EDUCATIONAL QUALIFICATION :
- Higher Secondary(Vocational – General Machinist)Passed Year of 2000 with 66.25%
- Diploma in Mechanical Engineering (D.M.E) passed year of 2003 with 68. 25%