EPCON International Bangalore : Chemical Process Engineer

[mskavi]

EPCON International, Inc. Bengaluru/Bangalore : Chemical Process Engineer

Website: http://www.epcon.com

Keywords: Chemical Process Engineer

Designation: Chemical Process Engineer
Experience: 2 - 4 Years
Location: Bengaluru/Bangalore
Compensation:
Rupees 4,00,000 - 5,00,000
Negotiable
Education:
UG - B.Tech/B.E. - Computers
PG - M.Tech - Computers
Industry Type: IT-Software/ Software Services
Functional Area: Other
Posted Date: 09 Feb

Job Description:
Will work with the US based development team to oversee process simulation software development and assist customers in conversion of flowsheets from other platforms.

Desired Candidate Profile:
Proficient in several major steady-state process simulators with good verbal and written communication skills. Knowledgeable in VLE data, thermodynamic methods, and fundamentals of physical property methods required in process simulation. Self motivated, team player that will interface between chemical engineering management in Houston and process simulation development team in India.

Company Profile:
We provide software development, training, and engineering services for engineers in the process industries. This includes software for process simulation, pipeline simulation, flare header analysis, pressure relief valve analysis including custom software development services. We have years of experience in engineering, thermodynamics, and software development that we apply to provide you with efficient and powerful simulation software solutions. Our software is depended on by leading chemical and petroleum companies worldwide and our engineering services has a 100% success rate finding root-cause problems in complicated process and utility systems.

Address:
EPCON International, Inc
1250 Woodbranch Park Dr. Suite 600
Houston,TX,US 77079

Email Address: jb@epcon.com

[Guest]

Hello mam

How can i contact u????there is no bangalore phone number

[yuva_ch]

Dear Sir / Madam,
I (P.R.YUVARAJ) am a chemical engineering graduate from ANNA UNIVERSITY, graduated in the year of 2004.At present I am working as Senior – Engineer Production (EPI CHLORO HYDRIN UNIT) in TAMILNADU PETROPRODUCTS LIMITED, a leading petrochemical complex in india,from SEPTEMBER 2004 to TILL DATE. I have attached herewith my curriculum vitae for your reference.
Thanking you
Yours truly
P.R.YUVARAJ
YUVARAJ.P. R
Mobile: 98415 03670 Email: yuva_ch AT yahoo.co.in Passport No: F7666628

Objective
A position that provides the opportunity to make a strong contribution to organizational goals through continued development of professional skills.

Professional Synopsis
-A competent professional with 5 years of experience in the areas of Plant Operations, Production Management, Maintenance, EHS Management and Resource Management in the Petro Products Industry.
-Presently working with Tamil Nadu Petro Products Ltd. as Senior Engineer – Production (Shift In Charge) - ECH Plant..
-Competency in managing production operations and devising significant solutions for maintaining sound environmental / safety conditions.
-Well versed with Hot Work, Cold Work and Vessel Entry &High Elevation Work Permit System.
-Possess excellent communication, inter personal and relationship management skills.

Education
-B.Tech (Chemical Engineering) from ANNA UNIVERSITY, A.C.Tech in 2004. (Secured 82%)
-Higher Secondary Education from Tamilnadu State Board of Education in 2000 (secured 92%)
-SSLC from Tamilnadu State Board of Education in 1998 (secured 97%)

Organizational Experience
Working in Tamilnadu Petroproducts Ltd., from Sep-2004 one of the largest petrochemical complex , An ISO 14001, & ISO 9002 Certified Company that won National Safety Council Award, British Safety Council Award and has its own Captive Power Plant As Senior Engineer – Production (Shift In Charge) - ECH Plant..
- Reporting to HOD operations

Professional experience.
ECH PLANT
-Allyl chloride section.
-Epi chloro hydrin section.
-Tank form ( propylene bullets,fuel oil, chlorinated organics,hcl, Alc, Ech storages )
-Utility section ( DM water plant, Instrument&service air system, Nitrogen unit, Raw Water & fire Warter pump)
House, cooling tower, boilers etc.)
-Effluent &sewage treatment section.

Professional skills
-Skilled in operating of DCS panel (yokogawa centum –XL) in Ech plant.
-SAP R/3 User.

Major Equipments Handled/skilled.
- Depropanisor coloumn,Azeotropic, Atmospheric & Vac Distillation Column, Stripper columns.
- Propylene reactor.
- Furnaces with Soot Blowers (natural, forced, balanced draft)
- Quench tower.
- Single & Multistage Compressors(Reciprocating type).
- Heat Exchangers(Shell and tube, double pipe, plate type).
- Syndyne Pumps, screw pumps,centrifugal pumps,Metering Pumps
- Reboilers, waste heat recovery Boilers.
- Propylene driers, Instrument air driers.
- HCL reactor and absorber.
- Cooling tower ,pumps and fans.

Training Program Attended
-Various Safety Training Programs in CPCL, &TPL.
-Firefighting Training & Safety Classes.
- Induction Training for 2 Months at M/s.SPIC Fertilizers, Tuticorin, India.
-CENTUM XL Operation Training by M/s.Yokagowa India Limited at Chennai, India.

Significant Accomplishments;
-Implemented an idea for modification in Cooling Water System which enabled major power saving in Epichlorohydrin (ECH) Plant.
-Successfully protected the factory from major fire & explotion hazard at propylene bullet area.
-Received appreciation award for voluntarily extending my service in putting off fire in CPP.


Key Result Areas:
Production Management
Planning the production activities and implementing plans with a view to ensure timely accomplishment of production targets within the cost parameters.
Implementing effective techniques to bring efficiency in operations to improve quality standards & achieve maximum cost savings.

Operations and Manufacturing
Coordinating with marketing, materials, finance, respective functional heads; preparing & monitoring of annual product wise volume budget of this division and ensuring on compliance.
Generating annual product wise efficiency budget for raw materials, utility; identifying loss points, improvement plan based on the loss points.
Monitoring of daily/monthly MIS in production and setting target bound corrective steps for variances to get planned productions and savings in efficiency as per budget wherever required.

EHS Management
Handing over equipments safely for maintenance; involved in handling safety equipments & fire fighting equipments, etc.
Identifying critical parameters and processes which are hazardous in nature & undertaking steps for curtailing plant upsets, fluctuations, emergencies and associated risks.
Charting out several safety measures for minimizing occurrence of accidents, fires, calamities; conducting investigations for determining basic cause of industrial accidents.
Personal Details

Contact Address : #83/30,South mada Street, Nellorepet,Gudiyattam,Vellore Dist -632602
Date of Birth : 27th April 1983
Marital status : Single

Declaration
I hereby declare that the above given details are true to the best of my knowledge and belief.

P.R.YUVARAJ

[Guest]

SHILPA SHRINIVAS
shilpshrinivas AT gmail.com
OBJECTIVE
To foster my career where my Chemical engineering knowledge can be well utilized to promote value based growth for me and the organization.
SUMMARY
- Almost 2 years of experience in Process Engineering (API-Chemical Synthesis)
- Good exposure in the pharmaceutical industry
- Highly skilled in quality control, cost improvement, equipment design, scale up and troubleshooting activities
- Good experience in technical evaluations of products and processes
- Strong verbal and written communication skills.
EXPERIENCE SUMMARY
BIOCON Limited-Process Engineer, Chemical Synthesis July 2010-till date
EDUCATION
- Bachelor’s degree in Chemical Engineering, from RV College of Engineering, Visveswariah Technological University with an aggregate of 80.6 %.
- 12th standard from Christ PU College with 87 %.
PROJECT SUMMARY
BIOCON Limited
Roles and Responsibilities :
- Worked on cost reduction projects (particularly productivity improvement) in Atorvastatin Calcium and Simvastatin API
- Validation and scale up of Atorvastatin Calcium Amorphous process (from R&D to 100 kg scale) with zero failures
- Worked on development of new streams for solvent recovery in Pioglitazone Hydrochloride API and Simvastatin
- Design and verification of design of new distillation column and accessories in solvent recovery plant
- Worked on cycle time reduction and trouble shooting in plant
- Prepared process and instrumentation diagrams, URS for new reactors, vessels as a part of plant expansion.
- Worked on particle size improvement in Orlistat API and Atorvastatin Calcium Crystalline.
Achievements :
- Received Bio Contribute Award at Biocon Limited for “Valuable contribution towards process excellence & Cost efficiency as a part of Cross functional team for Atorvastatin API productivity expansion”
- Enhanced Yield of Atorvastatin Calcium intermediate. Accomplished growth by 15 %
- Cost reduction of Pioglitazone Hydrochloride by developing new solvent recovery streams by 20% without compromising quality
- Cost reduction of Simvastatin by yield improvement of the product by 8%.
ACADEMIC PROJECT SUMMARY
- A project done on “Energy and emission accounting in Iron and Steel Industry” at Ecologix Knowledge Solutions Pvt Ltd, Bangalore between February 2010 to May 2010 as a part of BE curriculum.
- Worked on a project on “Use of Ultrasound for treatment of biomass effluent” at RV College of Engineering.
TRAININGS UNDERTAKEN
- Underwent 20 day industrial training in GE India Industrial Pvt Ltd, Bangalore during January 2009
- Underwent 3 day plant visit at JSW steel works, Bellary, Karnataka during March 2010.
SOFTWARE SKILLS
- Good knowledge of MS office suite, basics of hardware and internet applications
NON PROJECT ACTIVITIES
- Was technical team coordinator in a national level inter collegiate fest, REACT 2009 conducted by RVCE, Bangalore. Also was an active member in the sponsorship team.
- Organized and coordinated a one day national level technical symposium on Computational fluid mechanics held at RVCE, Bangalore
- Actively participated and won technical competitions like paper presentation, quiz etc. conducted in fests conducted in various colleges like MSRIT, BMSCE and DSCE etc.
- Trained classical singer and participated in many school and college level music competitions
- Won 1st place in Throw Ball as a part of Sports event in Biocon during December 2011.
- Actively involved and participated in Safety competitions and world environment day competitions conducted at Biocon.
PERSONAL STRENGTHS
- Excellent communication skills &possess good inter-personal skills
- Quickly learner& adaptable to new technologies
- Dedicated team player & ability to motivate team members
- Confident on taking new initiatives with minimum management direction

[Guest]

Iam intersted for this position . Please find my resume.

M. Ushakiran
Bangalore, India-560047

Email-ushakiran.mula AT gmail.com

Objective :
To contribute to the success of the organization and achieve professional growth by utilizing my technical skills and abilities, through innovative and challenging work

Professional Competencies :
Experience in equipment design and process development such as PFD, P&ID and datasheets
Skill in handling process flow circuits, process parameters and distributed control system.
Experience in onsite process control and monitoring.
Hands on experience in handling reactors, heat exchangers, and pumps.
Proficiency in managing start ups and shut downs of plants
In depth knowledge of all process design safety requirements, including HAZOP.
Ability to perform multiple tasks and meeting deadlines.

Employment History :
Hindustan Dorr Oliver Limited, Mumbai/Bangalore
Design Engineer – Process/Proposal Engineer (June 2011 - to date)

Work on EPC project design involving the following-

1.Technical & Engineering Services of Minerals like Copper/Iron/Zinc/Alumina Refinery, Lime Plants/Water Packages/Effluent Treatment Plant.
2.Basic and Detailed Engineering Package.
3.Preparing deliverables like Mass Balance, Piping and Instrumentation Diagrams (PID) Unit sizing, Hydraulics, Pipe Sizing calculations and Pump calculations, datasheet, Linelist, Instrument Process Datasheet, Equipment list, Motor list, Document Control Index.
4 Preparation of Instrument/Control Philosophy for whole plant so as to provide guidance to PLC engineer in developing logic as per this.
5.Discussion with vendor for technical Details and closure.
6.Preparation of Technical Proposals in line with client requirement which involves study of tender documents, Process Description. Design Basis, Scope of Work, Battery limits, and Technical details of various departments like civil, electrical and piping.
7.Co-ordination for engineering issues (Process related) among various departments of the organization for better and smooth execution of projects.

Work on EPC Project design involves the following :
1. Konkola Copper Mines ,Zambia

Project Name : 50,000 TPA Chingola Refractory Ore (Copper Refinery) Agitated Leach Plant Project. Involved in packages like Leaching, Counter Current Decantation, Neutralisation, and Raw Water Treatment Plant.

Job Responsibilities : Detailed Engineering & Preparing Process Deliverables like Preparation of Piping and Instrumentation Diagrams, Process Flow diagrams, Design Basis, Equipment List, Document Control Index, Motor List, Datasheets of Equipments, Line Sizing, Hydraulic Calculations and control philosophy etc.

2. Red Mud Filtration ,Vedanta Aluminium limited ,Orissa :
Project : 1.4 MTPA Alumina Refinery Project Red Mud Filtration Project. The Aim of The project is to deliquor the Red mud generated from Alumina Refinery by using Filtration method to be Eco-friendly.

Job Responsibilities : Detailed Engineering & Preparing Process Deliverables like Preparation of Piping and Instrumentation Diagrams, Process Flow Diagrams, Design Basis, Equipment List, Document Control Index, Motor List, Datasheets of Equipments, Line Sizing, Hydraulic Calculations, Discussion with vendor for technical Details, Preparation of control philosophy for whole plant, Preparation of Operating manual.

3. National Mineral Development Corporation,Donnimilai karnataka

Project : 0.36 MTPA Iron Ore Beneficiation Plant.

Job Responsibilities : Preparing Process Deliverables like Preparation of Piping and Instrumentation Diagrams, Equipment List, Document Control Index, Motor List, Datasheets of Equipment, Line Sizing, Hydraulic Calculations, Discussion with vendors for technical Details.

4. Knaiguiyah Mining Company,Saudi Arabia :
Project : 2 MTPA Cu-Zn Concentrator Plant
Job Responsibilities : Study of Tender Document, Preparation of Technical Proposal which involves preparation of Scope matrix between the Client and Contractor, Process Description, Design Basis, Battery limit conditions, Scope of Work, Equipments, Attending technical queries of client.

5. Kerala Mineral And Metals Limited ,kerala Kollam
Project : 5tph of Milk of Lime Plant.Lime plant is designed to handle 5 tph of Lime with 10 % Ca(OH)2
Job Responsibilities : Study of Tender Document, Preparation of Technical Proposal which involves preparation of Scope matrix between the Client and Contractor, Process Description, Design Basis, Battery limit conditions, Scope of Work, Equipment’s, Attending technical queries of client.

6. SAIL GUA ORE MINES ,Jharkhand India
Project : 10 MTPA Iron Ore Crushing Beneficiation and Pellet Plant

Job Responsibilities : Study of tender documents, Preparation of Technical Proposal which involves Process description, design Basis ,Battery limit conditions, Scope of work, Viewing vendor offer, Attending technical Queries of client etc.

Hindustan Zinc Limited, Vedanta PLC Dariba Zinc Smelter, Rajasthan
Process Engineer - Process (June 2009 - May 2011)
1.Process development and controlling process parameters as per specification range in Cellhouse Production of Zinc (Electrolysis Process)
2Managing distributed control system and process flow circuits in control room.
3.Production planning and achieving production targets.
4.Maintaining the product quality and monitoring equipment health and maintenance.
5.Handling the start-up and shutdowns of the plant.
6.Managing safety and environment aspect

Hindustan Zinc Limted, Chittorgarh, Rajasthan
Internship (Jan – June 2009)

Participated in project to reduce the size of particles of copper dross to 80% finer than 75 microns to achieve better rate of leaching. Achieved this by leaching the grounded copper dross with cuprammonium carbonate to extract copper.

Technology Skill Sets :
Application Software : MS Office, SAP end user.
Conversant with simulation software like Hysys.

Education :
M.Tech (Chemical), Birla Institute of Technology & Science, Pilani (2009) - 80%
B.E. (Chemical), L.D College of Engineering, Gujarat University (2007) - 74%
Ankur High School Gujarat Board (2003) - 70%
SSC Little Flower High School Gujarat Board (2001) - 83%

Academic Achievements :
- Attended CHEMCON-2006 organized by Ankleshwar Regional centre at GNFC LTD.Bharuch

Industrial Training :
- Undergone training in SANOFI-AVENTIS, a Pharma Company, at Ankleshwar during 19/12/2005 to 09/01/2006 was placed in API –I, II warehouse plants.
- Undergone training in DEVARSONS Industries Pvt Ltd. At G.I.D.C Ahmedabad during 12/6/2006 to 03/7/2006 was placed in Utility Section.
- Industrial Visits at AEROTHERM Engineers, Vatva Ahmedabad.
- Industrial Visit at IFFCO kalol in Ammonia Plants

Personal Particulars :
Date of Birth : 18 February 1986
Languages : English, Hindi, Gujarati and Telugu

Declaration :
I here by declare that all the information given above is true to the best of my knowledge.

Signature : Ushakiran