Air Energi Group Singapore : Structural Engineer FPSO conversion

[Admin]

Air Energi Group Singapore Pte Ltd Singapore : Senior Structural Engineer (FPSO conversion)

Website: http://www.airenergi.com

Keywords: hull, naval architect, offshore, FPSO, conversion, shipyard, finite element analysis

Designation: Senior Structural Engineer (FPSO conversion)
Experience: 10 - 20 Years
Location: Singapore
Compensation:
U.S Dollars 1,00,000 & above
open for discussion
Education:
UG - B.Tech/B.E. - Civil
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 03 Feb

Job Description:
A global FPSO operator is looking for a Senior Structural Engineer on an initial 1-year extendable contract through to permanent posting to join their FPSO conversion project team based onshore in Singapore.

You will be responsible for providing structural design and analysis for conversion of a tanker to FPSO/FSO; reviewing shipyard detailed structural design; supervising structural design team; coordinating with sub contractors design and analysis; providing support to the site team.

This is a senior leadership role with rates open for discussion. Standard company benefits and bonus schemes apply.

If you would like to find out more, please contact Eugene Santos on +65 6511 2341 or send your CV quoting this advert’s Requirement No. & Position as subject for immediate consideration to eugene@airenergi.com

Desired Candidate Profile:
You will ideally possess a degree in Civil/Structural Engineering with 5y+ experience in the shipyard or FPSO industries, with know-how on Finite Element Analysis and ABS Safe HULL Program.

Company Profile:
With over 1,000 conractors working through us worldwide, Air Energi is a leading provider of outsourced onshore & offshore manpower & contracting services to the world's top players in the oil & gas and energy process industries.

Executive Name: Mr. Eugene Thomas Santos

Address:
Air Energi Group Singapore Pte Ltd
1 North Bridge Road
# 06-03/04 High Street Centre
Songapore,na,Singapore 0

Telephone: 006565112341

Keywords: hull, naval architect, offshore, FPSO, conversion, shipyard, finite element analysis

[Guest]

Mr. David McCracken
310 W. Saulnier
Houston, Texas 77019
Mobile (281)851-9605
Email: dpmadmax@yahoo.com

EXPERIENCE:
04/08 to Present: KBR, Houston, TX - Structural Design
FPSO - Design and layout of primary steel plate girders, stabbing guides and lifting nodes. Development of secondary steel decks, access platforms, equipment supports and monorails.
PDMS v11.6

05/07 to 04/08: Boeing Commercial Airplane Group, Everett, WA. - Interiors Mechanical Design
787 Dreamliner - Developed new closet assemblies using the latest version of CATIA v5 & ENOVIA. Workbenches used include; sketcher, part design, assembly design. CATIA

01/07 to 05/07: Aker Kvaerner, Kristiansand, Norway - Structural Design
Drilling Platform - Designing miscellaneous steel structure enclosures for harsh weather environments, equipment supports and platforms.
PDMS

05/05 to 12/06 Mustang Engineering, Houston, TX - Structural Design
Offshore Platform Design - Topsides development. Developing topsides using DESIGN and DRAFT. Responsible for Secondary steel and tertiary steel; modules, skids, platforms, grating, plating, deck drains, jacket design, flare tower, equipment supports, mudmats. PDMS

05/04 to 04/05: CB&I John Brown, London - Structural Design
Offshore Platform Design - Fixed Platform ‘Buzzard’. Provided 3D Design and Draft using PDMS software. Developed equipment supports, platforms, decks, ladders, handrails. PDMS

03/03 to 05/04: Technip-Coflexip, Paris, France - Structural Design
Offshore Platform Design - TPG platform ‘Shah Deniz’. Assisted in 3D Design and Draft using PDMS software. Developed equipment supports and incorporated design changes in the model. Updated or created draft drawings to support final design of project. PDMS

10/01 to 03/03: Mustang Engineering, Houston, TX - Structural Design
Offshore Platform Design - Modeled platforms and walkways using PDMS 3D software package. Responsibilities included interfacing with all disciplines to coordinate final design. PDMS

09/97 to 10/01: Boeing Commercial Airplane Group, Everett, WA. - Interiors Mechanical Design
Overhead Crew Rest, Class Dividers and Partitions - Developed detail drawings for manufacturing, assembly and installation. Process included 3D solid modeling, surfacing and 2D drawing development.
CATIA & PDM (Product Data Management).

09/96 to 09/97: Shell Deep Water Development, New Orleans -
Structural Design
(Offshore platform). Assisted in the development of structural modules with the aids of 3D solid modeling (PDMS), 2D (PDMS) intelligent geometry and AutoCAD software. Team member of Structural Autocad Review Team.

10/95 to 09/96: Avondale Shipyard, New Orleans - Structural Design
Developed structural detail drawings for construction of Coast Guard Ice Breaker. Assembly type drawings were prepared using Autocad

03/95 to 09/95: Todd Shipyards, Seattle - Structural Designer: Developed various type of drawings for construction of the Washington State Ferry Jumbo auto ferry. Crew accommodations, public restroom arrangements, stowage area designs and emergency escape plans.
Autocad

EDUCATION:
High School Diploma, Brooklyn Park, MN
Programming Languages: C & C++ (University of Washington 2000/2001)

SOFTWARE APPLICATIONS:
EXCEL, WORD, AUTOCAD 13 (on Windows and Unix platforms), 14 & 2000, MICROSOFT VISUAL C++

[Guest]

PonnaiahPillai Ramesh Resume
Email – spramesh62 AT gmail.com
spramesh_smoe AT yahoo.com.au
Post Apply For :-Senior Enggr For Piping-Mechanical

PERSONALITY SUMMARY
Mechanical Engineer with more than 26 years of overall experience in project engineering, fabrication, installation, package-preparation&Review,mechanicalcompletion,pimsinformation,Dossiersubmission,pre-commissioning, Commissioning Quality Assurance/Quality Control (QA/QC) supervision, Monitoring, reporting activities .
with various reputed organizations. Familiar with ASME, API, ANSI, AWS, AWWA & API standard code 510,653,570,580 Inspection, Monitoring, Other international codes and standards. subcontractor quality surveys Monitoring and issuses clearences . Extensive Knowledge of Welding Processes, Non-Destructive Testing. Well versed with the Inspection of pressure equipments and non-pressure equipments such as Pressure Vessels, Heat exchangers, Boilers, Drums and Storage Tanks, Hydrostatic and Pneumatic test for various pressure equipments etc. Team player with excellent organization, presentation, communication, and team leadership skills.
EDUCATIONAL QUALIFICATION
DIPLOMA IN MECHANICAL ENGINEERING.
Valivalam desikar polytechnic in 1983
Secondary School Leaving Certificate
Board High School Kodavasal 1978
COMPUTER SKILLS
MS WORDS ,MS EXCEL,AUTOCAD
PROJECTS COMPLETED
ThermalPowerProject,Hydropowerproject,Atomicpowerproject,WaterTreatmentproject,CementPlant Crude Basin Refinery,RefinaryExpentionProject,LPGRecoveryproject,RefinaryShuitDownProjects., Solarpower Energy. Rle UpGrade Projects.
FPSOProjects, Processplateform,OffshoreAccomondation,crossover Bridge, Modules and Pipe Racks, FPSO Conversation project.
Page 1 of 5
Role & responsibilities :
- Production planning and control for piping Systems of all modules.
- Performing stage wise inspection in Piping, Structural ,Mechanical .
- Preparation of Final documentation and performing and coordinating
For inspection.
- Test pack Review & Test pack preparation and Mc Completion.
- Planning of Construction activities, and maintain constant contacts
with project team & Client.
- Daily Coordination meeting with contractors for achieving their targets.
- Review & Monitoring the site Construction activities, to identify any
issues related to Engg.
- Preparation For project Mechanical completion& punch list clearance for
commissioning.
- Preparation& completion Plan for Hydro test, Hot oil Flushing, Helium
leak test, chemical Cleaning, Pickling & Passivation.
- Strictly Monitoring the HSE Requirements.
- Monitoring of job progress and reporting the same to senior management.
- Co-coordinating with the client for various development and issues
analysis.
- To ensure proper record keeping and documentation.
- To undertake PMT Roll inspection at various stages as per the
specification.
- To ensure daily basis or weekly& Daily meeting With sub contractor for
Schedule & site other issues to be discussed and cleared.
- To be monitoring& ensured daily tool box meeting &, Daily progress &,
manpower issues.
- Coordination with MC team for ITR closing. And Main Dossier Submiting For
Pre Com- Commissioning activities for Startup.
- For pre commissioning/commissioning/start up of static and rotating equipment,
- Process and utility system in onshore/offshore environment.
- Preparing P&ID boundary markup drawings and commissioning planning and
executing, commissioning procedures/start up procedures independently.
- Capable to liaise with clients/construction team and attend project meeting.
- Supervising subcontractors/vendors to meet project schedule
- Using commissioning database and preparation of system commissioning handover to
Dossiers Client & field opration team.
- Managing Commissioning Permit to Work (PTW).
Page 2 of 5

PAST THREE PROJECTS HANDLED :
A) ERHA FPSO project (ASME Nigeria Deep Water Saipem) :
PROJECT DETAILS :
Procurement of bulk materials, fabrication of Topsides Modules, including the main Gas Injection Trains and Generator Modules as well as various Utility Modules. Installation and integration of the Modules, together with Free issued components.
Total weight 22,000 MT
Position : Sr. Supervisor
1. Independent module in charge for structural, piping, mechanical and Insulation Lead
2. Structural Pan cake fabrication and Erection,
3. Piping Fabrication and Erection , Testing and Insulation and Mechanical completion
4. Module Erection to vessel and Integration of module and commissioning and sea fastening.
B) BOHAI FPSO Project (ASME based) :
Project Details :
Fabrication/ Installation, integration and providing commissioning assistance of 15 Topsides Modules and 7 Pipe rack Modules onto a new build FPSO hull of 2 million barrels storage capacity Total Weight :32.000 MT
Position : Superintendent / Sr. superintendent
1. Independent module in charge for structural piping, mechanical and Insulation Lead
2. Structural Pan cake fabrication and Erection,
3. Piping Fabrication and Erection , Testing and Insulation and Mechanical completion
4. Module Erection to vessel and Integration of module and commissioning and sea fastening.
5. BOHAI vessel HULL Piping , Insulation Fabrication, Erection, Testing and
Chemical cleaning, Mechanical completion (Hull carry over jobs)
C) HALF DAN Project (EN-STANDARD NORTH SEA) :
PROJECT DETAILS :
Detailed design and engineering, procurement, construction, load-out and sea fastening of the Topside, Jacket, piles, flare and three connecting bridges
Topside - 7,600mt
Jacket - 3,530mt
Piles - 2691mt
Bridges - 765mt, 547mt, 105mt
Flare - 293mt
Position : Sr. Superintendent
Page 3 of 5
SUMMARY EXPERIENCES :-
Employer From To Position held Project details country
Sembawang Shipyard , BlueWater Singapore 4/2010 to till date SeniorEnggr,Pressure vessel Inspection co-ordinator[Lead] FPSO-Glas Dowr-Blue Water Project RLE Upgrading Works. For Kitan Field Devolopement . Blue Water Energy Services, Saipem Eni.Sembawng Shipyard Singapore
SMOE Singapore 6/2008 3/2010 Sr. Enggr [Bridge Piping STR Lead] Halfdan North sea project pro- platform ,Fabrication,Erection,Commissioning. Sembawang off shore Marine offshore Engg, Mearsk Norway Gen.
SMOE Singapore 6/2006 to 6/2008 Superintendent [Piping Mech-Lead] Bohai FPSO-Topside Modules Fabrication,Installation,Commissioning, Sembawang off shore Marine Engg,ConocoPhilips China. Singapore.
EswaraMarine Engg Supply to SMOE 9/2004 to 10/2005 Sr. Supervisor [Piping-Mech Lead] ERHA FPSO –Topside modules. Fabrication,Erection,Commissioning,Integration Sembawang Marine Offshore Engg.SHELL/Saipem
LG Engg Doha Qatar 7/2000 to 5/2002 Sr. Supervisor[Piping Insulation Lead] NODCO Refinery Expansion New Project And [ShuitDown Project]Commissioning QATAR General Petroleum Corporation.
Spic-JEL Engg India 1998 to 3/2002 Sr. Supervisor [Piping-Lead] Atomic power project, Water-Treatment Plant And UG Piping.Erection,Testing,Commissioning. Gujarat/ATPP Nuclear power Board India[Baba Attomic Energy]
RajaLakshmi Enrg.MRL Nagai India 1996 to 1998 Self Employee Gas Sweetening/LPG Recovery Plant[ShuitDown] MRL Nagai India/EIL India
Newton Engg India 1993 to 1995 Supervisor MRL Crude Basin Refinery[Shuit Down Project] MRL Nagai South India/EIL
BHEL/India 1990 to 1993 Supervisor Hydra power Project Erection Testing,Commissioning. Raichur/India RTPS Karnataka India/NTPC
ICPL/India 1989 to 1990 supervisor Thermal power project, Cement Plant.Erection,Testing,Commissioning, APHMEL/Andhra India/EIL
Gammon Engg India 1986 to 1988 supervisor Thermal power project, Aluminum Smelter Plant Orissa/India CPP/BHEL
Petron Engg India 1984 to 1986 supervisor Thermal power project, Orissa/India CPP/BHEL
Page 4 of 5
WORK EXPERIENCE For Decipline Wise
Steel Structural
- Structural detail drawing, Cuting plan ,Shop drawing Review,MTO Prepration and Procurement,Material Handling,Fabrication, Erection, Alignment,welding,Ndt, waying,loadout,barging or lifting.
Piping
- Piping detail drawing Shop drawing Review,MTO Prepration, Procurement,Material Handling, Fabrication, Erection, welding,NDT ,Test pack prepration review,Hydro Testing,driying,re-instatement,mc-completion,Insulation, helium leak Test,Pre-Commissioning ,commissioning activities.
Mechanical
- Equipement detail drawing, Layout review , Procurement,Equipement Storage, hadling, vendore drawing, Vessel, Cooler, Heat Exchanger, Storage Tank, turbine, LP&HP Casing, Generator, Plate coolers, KO Drums, Test Separator, Stabilizer Column ,Exciter, Centrifugal pumps, Heavy motors, and STR drg Review and Equipement lifting installation, Skid Leveling, Alignment, mc-completion, commissioning activities.
Pressure Vessel & Heat Exchanger Cooler
- Any Type of vessels,Stabiliser column,HeatExchanger,Cooler,plateCooler,KO-Drum,Volume Bottele,Hydro cyclone unit,Fabrication,Assembly, welding, Testing,Installation,Alignment.Mc Completion,DossiersSubmition.
Upgrading works Example :-
- VesselsManholeopening,Internal API Standard Inspection,NDT Advance Technology, Internal & External Video Scopic Inspection,UV Test.
- Review and recomondation,Internal Removal,Repair,ReAssembly,ReInspection,Testing,MC Completion,Final Documentation & Commissioning.

[Guest]

CURRICULAM-VITAE
M.THIRUMUGAM

Email : thiru_mugam2003 AT yahoo.com

CAREER OBJECTIVE :

Always try to give back the company much more than I get from them & to take the company to top position, wherever I work .
Personal Mission Statement :

To attain perfection & excellence in my work, upgrade knowledge & technical skills to help the beneficiary.
EXPERIENCE :
Jan’99 – Mar’00 > Completed one Year APPRENTICESHIP TRAINING PROGRAM
At, M/s.SEAMLESS STEEL TUBE PLANT,
BHARAT HEAVY ELECTRICALS LTD.,
Trichirappalli – 620 014.

Jan’01 – Dec’03 > CAD Draughtsman at DSM Soft (P) Ltd,
Trichirappalli – 620 001.

July’04- Feb ‘06 > EFFIMAX ENGINEERS (P) LTD
Chennai-41
Feb’06-Jan 2007 > M/s THERMAX LTD
Chennai-18
Jan’07-till date > M/S AE & E (India) Private Limited.
53,Greams road
Chennai-06
Educational Profile

Technical Qualification : Diploma in Mech Engg

Name of Institution : Christian polytechnic, Amblikai..
Year of passing : Oct ’96
Percentage of Marks : First Class
COMPUTER SKILLS

Operating System : Dos 6.22, Windows 95/98.
Packages : AutoCAD, AutoCAD Mechanical 2008, PDMS 11.6 SP4,
Inventor 2008, Navis works
GUI : Ms-Office-97/00(Word, Excel, PowerPoint).
EMPLOYER : M/s AE & E(India) Private Limited.
Period : From Jan 2007 to till this date.

Designation : Designer
Responsibilities : Preparation of General Arrangement and Fabrication detailed drawing for
Steel structure and ducting for Power plants. Preparation of General
Arrangement Model in PDMS and Inventor.

2D Extraction & Drafting from PDMS and inventor Model.
Projects done :
- Bamberg - Germany
- Moerdijk - Netherlands
- Intradel - Belgium
- Cleveland – United Kingdom
- Zitersdorf – Austria
- Bergen (PDMS)-Norway
- Leudelange (INVENTOR)-Luxemberg
- Riverside (INVENTOR)-United Kingdom
- New Haven (INVENTOR & PDMS)
- Roosendaal(INVENTOR & PDMS)
- Oslo(INVENTOR & PDMS)

EMPLOYER : M/s THERMAX LTD
Period : From Feb 2006 to Jan 2007.

Designation : Cad draughtsman(Contract)
Responsibilities : Preparation of General Arrangement and Fabrication detailed drawing for

Steel structure and equipments for Sugar plant.

Projects done :
- Mawana 90TPH
Client – Titawi sugar complex (unit of Mawana sugars)
- Bagasse Fired Boiler 100 TPH.
Client – Ncs sugars Ltd.
- Floormounted Boiler 70 TPH
Client – Qater Vinal Company Ltd.
- FBC Water Tube BI-Drum Boiler 45 TPH
Client – Shreyans Industries Ltd.

- Auxiliary Boiler 275 TPH
Client – Reliance Jamnagar Export Refinary
Pressure parts :
Involved in Detail Engineering of Pressure parts such as Air preheater,Economicer,Superheater,
Inbed Superheater,Attemptator.
- AFBC Boiler 76 TPH
Client – A/C :-Madras Cements Ltd.
EMPLOYER : EFFIMAX ENGINEERS
EFFIMAX ENGINEERS a company which expertise in the field of Boiler Supporting Structural Drawings.

Period : From July 2004 to Jan 2006.

Designation : Cad Draughtsman
Responsibilities : Preparation of General Arrangement and Fabrication detailed drawing for
Steel structure and ducting for Power plants.
Projects done:

- Fluidised Bed Boiler-45TPH
Client – M/s. Rukmani Power & Steel Ltd.
- Water Tube Boiler – 25 TPH
Client – M/s, KAILASH PAPER PRODUCTS LTD

EMPLOYER : DSM SOFT PVT.LTD
Period : From Jan 2001 to Dec 2003.

Designation : Cad Draughtsman

Responsibilities : Conversion of P & I Diagram, Steel Structural,Architechtural and
as per the clients requirement.
EMPLOYER : DSM SOFT PVT.LTD
Period : From Jan 1999 to Mar 2000.

Designation : Apprentice

Responsibilities : Preparation of Final inspection Report for SPIRAL FIN WELDIED TUBES.
And Co-operate with IBR.

Declaration
I here by declare that the above mentioned details are true and correct to the best of my knowledge
And belief.
Yours truly,
M.Thirumugam.
Place : Chennai
Date : 05.07.2011
(THIRUMUGAM.M)

[Guest]

MD. ABUL BASHAR
(B.Sc. in Naval Architecture & Marine Engineering)
E-mail :bashar02m AT gmail.com
Experiences : 5 years
Objective :
According to me, intelligence is not a privilege and there is no shortcut way to succeed. Only strenuous efforts can put a man to his apposite destiny. In an adverse circumstance a man can exploit his ability explicitly. Working in an auspicious position which can augment my attributes not desultorily but in a structured manner is my first and foremost objective of my career. And if in a perplexity I don’t know the answer, I’ll admit that I don’t know the answer. Pragmatically I’ll find the answer, because, I know how to find the answer.
Professional Track Records :
Project Attended :
“10 Nos. 70 m, 1600 dwt Oil Tanker of RINA Class”
Company, Designation &Duration : Class RINA as a Jr. Surveyor since June, 2012—Till Date.
Key Responsibilities :
- To check and confirm shipbuilding materials quality & size (plates, profiles, angles etc.)
- To check and confirm if the approved drawing is being followed.
- To check and confirm the quality of welding and of workmanship.
- To check and confirm the machinery item is being installed as per specification.
- Inspects Load Line Item, such as hatchways, freeing ports, ventilators,
- Bulkheads, fittings, and attachments, for compliance with operating standards, and compliance with standards for protection of crew.
- Observes operating tests on machinery and equipment and inspects opened up machinery for interior condition.
- Observes Inclining Test, Sea Trial, Delivery of Vessel
- Prepares reports on types of surveys conducted, recommended actions and repairs, or conditions remedied, Preparation of Reports, Records and Issue of Interim Class Certificates.
- Submits report to client, and conducts a statistical survey and ascertains the contents and condition and value of merchandise.
“3 Nos. 42 m, 300 t Capacity Deep Sea Fishing Vessel for Bangladeshi Flag”

Company, Designation & Duration : Western Fishers Shipyard Ltd. as a Manager (Design, QC &Planning) Since July, 2011—May, 2012
Key Responsibilities :
- Overall In-Charge of Design and Quality Control Dept.
- Responsible for detail design of hull structures and hull outfitting for commercial and other marine related products.
- Lead and manage the design team of naval architects and design engineers performing calculations and design of new ships and major ship conversion.
- Conduct design review with customer, Classification society, national regulatory bodies, consultants and vendors.
- Responsible for planning, control and monitor details design/drawing schedule according to build strategy.
- Responsible for ensuring quality, timely delivery, Class & Owner’s satisfaction.
- Ensure proper training of QM staff and create awareness of quality, safety among the general staff of shipyard.
- Maintain all documents as per quality management system
- Responsible for proper execution of all works related to quality of shipbuilding as per contract agreement.
- Others job assigned by the management.
“3 Nos. 30 ft , 10 t Capacity Wooden Fishing Boat for FAO-BD(UN)”
Company, Designation &Duration : Food & Agriculture Organization of the United Nations as a National Consultant (Naval Architect), From March, 2011—June, 2011
Key Responsibilities :
- Assist the FAO international consultant Naval Architect to review the designs of traditional coastal and inshore fishing vessels.
- In collaboration with the FAO international consultant Naval Architect, train counterparts from Bangladesh University of Engineering and Technology and other marine engineering institutions in the principles of the new designs and guidelines for construction of the improved boats.
- Design an “on the job” training program and train selected local boat builders.
- Prepare a manual in the construction of improved fishing boats.
“6 Nos. 150 m, 17000 dwt BV Classed, Bulk Carrier and Oil Tanker for Bangladesh Govt.”
Company, Designation &Duration : Bangladesh Shipping Corporation as an Asst. Manager (Ship Repair) from August, 2010---January, 2011.
Key Responsibilities :
- Responsible for In-house survey of the vessels before class inspection.
- Prepare repair related drawings/documents
- Invitation and processing of repair/Supply related tenders.
- Responsible for preparing work order
- Processing of repair related bills.
- Responsible for preparing comparative statement of different materials by collecting quotations from vendors
- Attend port/custom/MMD for certification of Flag State
- Maintain Documents of ISM, ISPS, Class and Flag State Control.
“4 Nos. 100 m, 5200 dwt GL Ice Classed, MPC Vessel for German Flag.”
“1 No. 25 m, 150 t capacity GL Classed, Oil Recovery Vessel for LAMOR Corp. Finland.”

Company, Designation &Duration : Western Marine Shipyard Ltd. As a QM Surveyor from January, 2009---July, 2010
Key Responsibilities :
- Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
- Lead a team of engineers/supervisor to complete block fabrication/erection in time.
- Liaises with Contract Engineers for mechanical completion and commissioning supports from contractors.
- Liaises with Class and Owner’s Rep.
- Prepare ITP,SWP, WPS ,WPQR of Individual Project.
- Prepare and maintain delivery protocol/documents
- Assist QA/QC Inspectors on material verification check and incoming goods receive
- Inspection of Surface Preparation before Painting and records of painting.
- Implementation of ISO 9001 :2000 rules and guide lines
- Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
- Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
“2 Nos. 88 m, 4100 dwt GL Ice Classed, MPC Vessel for Denish Flag.”
Company, Designation &Duration : Western Marine Shipyard Ltd. As a Naval Architect from February, 2008---January, 2009
Key Responsibilities :
- Prepare production drawings (detailing of hull structure), welding schedule etc.
- Material estimation of steel plate, profile, pipe etc.
- Stability calculations , inclining experiment ,GA plan
- Prepare Nesting Plan for CNC cutting.
- Freeboard, tonnage, light ship weight calculations
- Coordinates interdisciplinary and subcontracting activities.
- Reviews supplier / sub-contractors design deliverables.
- Prepare production drawings (detailing of hull structure), welding schedule etc.
- Material estimation of steel plate, profile, pipe etc.
- Stability calculations , inclining experiment ,GA plan
- Freeboard, tonnage, light ship weight calculations
- Coordinates interdisciplinary and subcontracting activities.
- Reviews supplier / sub-contractors design deliverables.

Education :
Degree Institute PassingYear Result
B.Sc. in Naval Architecture & Marine Engineering (4 Years) Bangladesh University of Engineering and Technology(BUET) Jan/2008 CGPA : 3.37
(out of 4)
Training :
- Participated in Occupational Health & Safety Workshop Organized by ILO, Dhaka.
- Security Awareness Training from UNDSS, Dhaka, Bangladesh.
- New Building Surveyor Training From Class RINA(2months)
Computer Skills : Other Skills:
Language Proficiency :
- English : Excellent in Listening, Reading, Writing and Speaking
- Hindi : Standard in Listening & Speaking.
- Bengali : Excellent in Listening, Reading, Writing and Speaking
Personal Information :
- Parents : Md.Bachchu Meah & Johora Begum
- Date of Birth : 1st Dec, 1984
- Nationality : Bangladeshi by Birth (Passport No.AA6473732)
- Religion : Islam
- Weight & Height : 165 lb (75kg) & 176cm (5’9”)
- Marital Status : Married
- Hobby : Watching Movies, Reading Literature & Traveling
Member of Professional Bodies :
- Associate Member of The Royal Institution of Naval Architects (AMRINA) (UK)
- Associate Member of Institution of Engineers Bangladesh (AMIEB)
Certification : I certify that all information stated in the curriculum vitae are true and complete to the best of my knowledge. I authorize you to verify information provided in the curriculum vitae. Md. Abul Bashar