www.elgi.com Equipments Coimbatore : Value Engineering

[mskavi]

Elgi Equipments Coimbatore : Manager-Value Engineering

Website: http://www.elgi.com

Keywords: Value Engineering , R&D

Designation: Manager-Value Engineering
Experience: 10 - 15 Years
Location: Coimbatore
Education:
UG - B.Tech/B.E. - Mechanical,Diploma - Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Industrial Products/Heavy Machinery
Functional Area: Engineering Design, R&D
Posted Date: 07 Jan

Job Description:
The position involves in handling the value engineering projects of R&D Team.

Desired Candidate Profile:
The candidate should be a BE/DME with 10/15 Years Experience in R&D,Engineering Design and Value Engineering.
Good communication and interpersonal skills.
Team management skills.
Leadership / Motivating ability.

Company Profile:
Elgi Equipments Ltd is the flagship company of the Elgi Group, Asia's largest integrated Air Compressor and Automotive service equipment manufacturer.For over 4 decades ELGI, a leading Indian multinational has been reaching out to discerning clients in more than 40 countries across the world. ELGI now offers opportunities to career -conscious and self motivated professionals to be part of a team that's been the front-runner in technological innovations and world -class service.

Executive Name: Raj Kannan S

Address:
Elgi Equipments
Singanallur
Coimbatore
Coimbatore,Tamilnadu,INDIA 641005

Email Address: rajkannan@elgi.com

Telephone: 91-422-2589111

Reference ID:
Manager-Value Engineering

Keywords: Value Engineering , R&D

[Guest]

any vacancies in metrology dept

[Guest-IJT]

Dear Sir,

My self Santanu Kumar Mohanty having five years experience in power , steel & aluminium sector in materials department. Here i am forwarding my Resume.

SANTANU KUMAR MOHANTY
At-Champatotha
P.O.-Kanpur
Dist- Cuttack
Pin-754037
Orissa
Mob: 9937500490 E-mail-santanu_manua@rediffmail.com

CAREER OBJECTIVE

Aiming for working in an organization that is young at heart, where work is appreciated and encouraged, and mind always looking for new ideas is considered an asset in employees. I believe that any situation can effectively overcome if tackled with confidence, decisiveness and sense of hum our.

SUMMARY OF SKILLS

 Excellent time management and organizational skills.
 Able to work well independently as well as in a team environment.
 Responsible and eager to learn new skills.
 Vendor development & Vendor evaluation in the field of procurement.
 Excellent negotiation skills.
 Cost estimation & Cost analysis.
 Working on an environment using on-line ERP software.


 Total Year of Experience: Result-oriented technocrat with 5 years of qualitative experience in the field of materials procurement.



Since May,2008 with Hindalco Industries Limited(Unit: Aditya Aluminium), Sambalpur, Orissa as a Purchase Officer - Commercial & Materials
The Company Profile: Hindalco Industries Limited, the metals flagship of the Aditya Birla Group, ranks today as the World’s largest aluminum rolling company and among Asia’s largest integrated player in aluminum.
The Job Profile: Working as a permanent employee in the post of Purchase Officer- Commercial & Materials posted at Sambalpur and looking after the integrated Mega Greenfield Project in Orissa for manufacturing 4.5 MTPA Mines at Maliparbat , 1.5 MTPA Alumina Refinery at Kansariguda in the district of Rayagada and 0.359 MTPA Aluminium Smelter and 900 MW Captive Power Plant at Lapanga in the District of Sambalpur with a Capital outlay of about Rs 11108 Crores from 07.05.2008 to till date.




Contd.02
:02:

2005-2008 with Aartisteels Ltd, Ghantikhal, Orissa as a purchase officer
The Company Profile: M/s Aarti Steels Ltd., Ghantikhal which consists of 500 TPT Sponge Iron Plant , Coal Washery of 1.0 Million tonnes, 40 MW Power Plant, 1.0 million tones of steel melting shop and Submerged Arc Furnace(SAF) 2nos at Ghantikhal , Cuttack

JOB PROFILE :

 Capable of purchasing imported & indigenous materials , developing a strong network of vendors for indigenous materials.

 Able to work in single window systems of purchasing i.e.-scrutinizing Indents, pursuing the tendering process for material procurement by floating tenders & evaluation of bids to awarding of contracts, liaising with bidders with regard to techno-commercial negotiations, Preparing Purchase Proposal for final approval, contract agreement, preparing order, follow up of the order placed, getting inspected the received goods, sending D.R. (Deficiency Report) for rejected items and co-ordinate with stores for proper maintaining of records.

 Fully conversant with ERP system in Procurement of materials.

 Following Just in Time purchase & ARC contract’s of SMS(Steel Melting Shop) consumables maintaining Zero inventory level.

ACADEMIC CREDENTIALS

 B.E. (Mechanical) from Utkal University , Bhubaneswar from 2000- 2004 with 69% marks.

 +2 Science from CHSE Orissa (Dhenkanal Govt.College, Dhenkanal) from 1997-1999 with 55% Marks.

 Passed 10th from B.S.E. Orissa in the year of 1997 with 83% of marks.

 Continuing PGDMM (correspondence, 3rd year) from ‘Indian Institute of Materials Management’, Navi Mumbai.

PERSONAL DETAILS

Name : Santanu Kumar Mohanty
Father's name : Late Mr. Debaraj Mohanty
Mother's name : Sarojinee Mohanty.
Date of birth : 17th July, 1982
Nationality : Indian
Marital Status : Un married
Religion : Hinduism
Sex : Male
Language Known : English, Hindi,Oriya
Hobby : Gardening & playing Chess

DECLARATION
I do hereby declare that all the information given above are true complete and correct to the best of my knowledge and belief.


Date :
Place:

[Guest]

MUTHUPANDI.S
E-mail : mpmech12 AT hotmail.com ,
muthupandi1261 AT gmail.com
________________________________________
CAREER OBJECTIVE :
To become a successful professional in the field of Mechanical Engineering and to work in an innovative and competitive world. This will help me to explore myself fully and realize my potential. Willing to work as a key player in challenging & creative environment.
I am also confident of my ability to work in a team.
ACADEMIC DETAILS :
Course Specialization Institution Board/
University Year of
Passing Percentage
B .E
Mechanical Engineering Park College of Engineering and technology
Coimbatore
Anna University
- 73% (Upto 8th sem)
HSC
Computer science/ Mathematics S.B.K.Higher Secondary School,
Aruppukottai.
Tamil Nadu
State board
2007
82.3%
S.S.L.C
Science/
Mathematics
S.B.K.Higher Secondary School,
Aruppukottai.
Tamil Nadu
State board
2005
83%
AREA OF INTEREST :
- automobile
- Manufacturing Technology
PROFICENCY :
- AutoCAD
EXTRA- CURRICULAR ACTIVITIES :
- Surfing net for latest updates.
- Playing basketball, cricket, handball and chess.
INDUSTRIAL VISITS :
- BAY FORGING COMPANY, Chennai.
.
PROJECT WORK :
- Have designed and fabricated a RECIPROCATING SAW MACHINE system.
- I have finished my project on DESIGN, FABRICATION AND ANALYSIS OF FIVE FINGERED ROBOTIC GRIPPER and also I got “Best Project Award in 2011 Batch” in mechanical department of our college.
PAPER PRESENTATION :
- Participated in a paper presentation in HINDUSTAN COLLEGE OF ENGINEERING Chennai.
ORGANISATION SKILLS :
- Organized EXCAPADE’10 & 11
- Organized N.C.C Special camp’04

[Guest]

S.NAVEEN

e-mail : naveensabastin AT gmail.com

CAREER OBJECTIVE :
To work efficiently in a challenging environment where my skills and knowledge are utilized for the growth of the Organization.
EDUCATION :
BOARD/
UNIVERSITY
INSTITUTION
PERCENTAGE
YEAR OF
PASSING
Anna University- Chennai.
St.Peters Engineering college, Chennai.
Course : B.E / EEE

69

2011
Tamil Nadu Higher Secondary Examination
Jawahar Matric Higher Secondary School, Neyveli.
87

2007
SSLC
[Matriculation]
Jawahar Matric
Higher Secondary
School,Neyveli.
78
2005
TECHNICAL KNOWLEDGE :
- Ms-office
- Languages : C , C++
- PLC Programming.
STRENGTHS :
- A good team worker.
- Efficient knowledge in Mathematics & Electronics.
- Good drawing capability.
- Honesty and Trustworthiness.
INDUSTRIAL VISITS :
- North Chennai Thermal Power Station
- Substations in Avadi and Sriperumbudur
- Thermal Power Station-1 and Mines-1 in Neyveli Lignite Corporation.
- Pondicherry Cooperative Sugarmills Ltd.
INPLANT TRAINING :
Have attended the inplant training for a period of 15 days in Thermal Power Station1 /Neyveli .Lignite Corporation (A Govt. of India Enterprise). The training gave a huge experience
and the knowledge about the working of the thermal power station and the various processes implemented to produce the certain amount of power.
PROJECT :
TITLE : “ Busbar protection using Microcontroller ”
Have done the project in the title ‘Busbar protection using Microcontroller’ in Thermal
Power station-1 in Neyveli Lignite Corporation for a period of 1month. The main objective of the
Project is to protect the Busbar from various faults (ie.,)during abnormal conditions.The principle
of operation is based on the Differential protection.The sum of the incoming currents should be
equal to that of the outgoing currents. In case of any discrepancy or difference, the relay will
get energised and the busbar will be isolated from the faulty section.

[Guest]

R.MOHAN

- mohan8.rajan AT gmail.com
CURRICULUM VITAE
CARRER OBJECTIVE :

To pursue a challenging career in a progressive environment where learning, innovation and creativity are encouraged, where my skill set can be enhanced to their maximum potential to contribute to the overall success and growth of the organization.
AREA OF PASSION :
- Prodution.
- Quality management.
- New energy sources.
- Industrial safety.
PROFESSIONAL SUMMARY

Quality control engineer with diversed experience in quality control , excellent communication & supervisory capabilities.formulae idea clearly and concisely. Open minded team player with effective inter personal skills and with an ability to give quick results.
EXPERIENCE DETAILS :
ORGANIZATION DURATION DESIGINATION
AQUASUBENGINEERING
ONE YEAR QUALITY INSPECTOR
CRI PUMPS ( RANSAR -1) ONE YEAR QUALITY INCHARGE
-
ROLES & RESPONSIBILITIES :
- COMPANY : AQUA SUB ENGINEERING -1, COIMBATORE.
- Inprocess & final inspection of pump components.
- Maintaining 5’S in machine shop, TPM, POKA YOKE.
- Raising NON CONFORMITY.
- For every setting setup approval will be approved.
- COMPANY : CRI PUMPS PVT LTD ( RANSAR -1), COIMBATORE.
- Maintaining 5’S concept in machine shop.
- By using NDT (magnetic particle & penetrate test) defect will be found out.
- Updating quality maintenance chart for every day.
- STATISICAL PROCESS CONTROL study will be taken for every machine.
- CONTROL PLAN, OPL & SOP will be prepared & training given.
- KAIZEN has been identified.
- 8D & NON CONFORMITY will be raised to concern department.
- Training class will be conducted for every month about product & process knowledge.
- Training conducting to quality employee about SPC , 7 QC TOOLS.
- Knowledge about FMEA, PPAP,FIFO, ISO 9001, MSA,TPM,TQM.
- Create awareness about safety & personal protective equipment.
CO-CURRICULAR ACTIVITIES :
- Participated in NSS camp programming on YOUTH FOR RECHARGING OF WATER RESOURCES held at nelli kollai , cuddalore district.
- Runner in district level HOCKEY held at karadivavi in Tirupur.
- Diplomo in industrial safety in ANNAMALAI UNIVERSITY.
SOFTWARE EXPOSURE :
Microsoft word , excel , AUTOCADD.

EDUCATIONAL PROFILE :
Course Board/University Year of completion Name of Institution Marks Secured
%
B.E (MECHANICAL) ANNA MALAI UNIVERSITY 2009 ANNAMALAI UNIVERSITY. 7.03(CGPA)
HSC STATE BOARD 2005 MAHAJANA HIGHER SECONDARY SCHOOL,
METTUPALAYAM 79.8
SSLC MATRIC 2003 SAN JOSE MATRICULATION SCHOOL,
METTUPALAYAM 72.9
PROJECT :
TITLE ;
IMPROVED DESIGN OF DOUBLE SLOPE SOLAR STILL FOR PRODUCIVITY.
CONDUCTED AT :
Solar energy lab in ANNAMALAI UNIVERSITY.

[Guest]

GOPALAKRISHNAN
Email : gokii_25 AT yahoo.co.in

ENGINEER PROFESSIONAL
Quality assurance ~ Purchase~ Vendor development
SYNOPSIS
An astute professional with 14 years of experience in managing the wide spectrum of tasks including Quality assurance, Purchase, Vendor development etc. In quality assurance responsible for incoming Inspection, in-processes Inspection, supplier end inspection, maintaining and updating of calibration instruments. Adept in negotiating with vendors for procurement of numerous components; supervising overall processes at the vendors end & providing valuable suggestions for efficiency enhancement. Distinction of effectively steering procurement with accomplishments spanning reduction in material costs and enhancing vendor performance.. Successful in building relations with vendors & sorting out critical problem areas and delivering on customer commitments. STA responsible for New Supplier Evaluation and Approval, Supplier New Part Approval, Supplier Quality Performance Intimation, Technical Support for Solving Quality Issues, Supplier Process Audit and Supplier Development Qualified as Internal Auditor for ISO Standards,API6A and pursuing supplier certification for ISO.
PROFESSIONAL QUALIFICATION
DME from Vinayaga mission, Salem with 79%
Automobile Technology from Annamalai University
ITI from TKAM, Kunnarakkudi
Computer Skills
- SAP-MM (Working Knowledge)
- Proficient in MS Office, Open Office, AutoCAD and Internet Applications.
Company profile
Servall Engineering Works (P) Ltd, Coimbatore. (Since Dec’2010 to Till now)
A leading ISO 9001/ EMS 14001/ OHSAS 18001 Certified Paper & Pulp Machines Manufacturing Company in Coimbatore.
PROFICIENCY FORTE –Vendor Development
Assignments Handled : Dec’2010 to Till now
The Role : Sr Engineer – Vendor Development
- Evaluation and Approval of new supplier's
- Providing and ensuring necessary inputs to the suppliers on Technical requirements.
- Approval of Supplier product / Process through PPAP
- Ensuring the effective implementation of the required Quality system at supplier site and development
of the supplier for Servall system requirements.
- Implementation of supplier process change request in co-ordination with related functions.
- Conducting supplier's audits and initiating to improve the supplier based on the audit results and ensuring that the supplier has improved.
- Development of supplier's for self- certification and maintaining QMS standards
- initiation & implementation of Kaizens and continual improvement project at supplier end based on day by day activities.
- Co-coordinating with the supplier's for taking permanent corrective action for supplier quality problem and analysis 7 QC tool.
- Monitoring the effectiveness of the corrective and preventive actions implemented the supplier's
- Designing of required Tool,Dies,Jigs and Fixtures
RECOGNATION FOR PERFORMANCE
- ITC – Customer Satisfaction award for disaster Management
Company profile
Roots Multi Clean Ltd, Coimbatore. (Since Nov’2008 to Nov’2010)
A leading ISO 9001/ EMS 14001/ OHSAS 18001 Certified Industrial Cleaning Machines Manufacturing Company in Coimbatore. The company is engaged in manufacturing Mechanized Industrial and Domestic Cleaning Equipment with German Technology and Collaboration
PROFICIENCY FORTE – Product Development Engineering
Assignments Handled : Nov’2008 to Nov’2010
The Role
Engineer – Product Development Engineering (PDE)
Materials Management
- Interfacing with Department Heads for assessing annual requirement of material in line with core organizational objectives.
- Directing the development and implementation of key purchase / procurement strategies; identifying & developing reliable vendor for procurement of materials.
- Ensuring optimum inventory levels for achieving cost savings without hampering the production process and preparing reports for the same.
Sourcing / Procurement
- Formulating budgets for timely procurement of various critical components.
- Establishing Procurement targets; developing operational budgets and ensuring adherence to the same.
- Developing sound sourcing strategies to minimize Total Cost of Acquisition of direct materials.
- Developing the alternate source of procuring and establishing the process.
Supply Chain Management
- Costing and negotiating with supplier for new components and as well as rate revision matters as per raw material price fluctuation.
- Developing long-term partnerships with local & foreign suppliers; managing day-to-day supplier performance to ensure meeting of service, cost, delivery and quality norms.
Cost Planning & Management
- Making effective use of cost analysis tools in support of strategic sourcing process, procurement costs, cost reduction metrics and bottom line performance indicators.
- Generating MIS reports relating to material management, cost savings / vendor QA operations & transmitting them to the top management for facilitating the decision making process.
Supplier Development
- Consistently evaluating vendor performance to ensure adherence to predefined specifications and supply of quality material / execution of job works.
- Negotiating with vendors for improving product quality & reducing lead-time for deliveries.
- Strengthening existing vendor source & developing alternate suppliers.
- Assessing the performance of the vendors based on various criteria such as prices, quality improvement rate, timely delivery, credit terms etc.
- Releasing supply schedules to vendors to ensure on time deliveries
Company profile
GTN Engineering India Ltd, Coimbatore. (Since Jun’2007 to Oct’2008)
A leading API6A/ ISO 9001/ EMS 14001/ OHSAS 18001 Certified Valve Manufacturing Company in Coimbatore.
PROFICIENCY FORTE –Supplier Technical Assistance (STA)
Assignments Handled : Jun’2007 to Oct ‘2008
The Role : Engineer – STA
- Evaluation and Approval of new supplier's
- Providing and ensuring necessary inputs to the suppliers on Technical requirements.
- Approval of Supplier product / Process through PPAP
- Ensuring the effective implementation of the required Quality system at supplier site and development
of the supplier for GTN system requirements.
- Implementation of supplier process change request in co-ordination with related functions.
- Conducting supplier's audits and initiating to improve the supplier based on the audit results and ensuring that the supplier has improved.
- Development of supplier's for self- certification and maintaining QMS standards
- Initiation & implementation of Kaizens and continual improvement project at supplier end based on day by day activities.
- Co-coordinating with the supplier's for taking permanent corrective action for supplier quality problem and analysis 7 QC tool.
- Monitoring the effectiveness of the corrective and preventive actions implemented the supplier's
- Designing of required Tool,Dies,Jigs and Fixtures
Supply Chain Management
- Costing and negotiating with supplier for new components and as well as rate revision matters as per raw material price fluctuation.
- Developing long-term partnerships with local & foreign suppliers; managing day-to-day supplier performance to ensure meeting of service, cost, delivery and quality norms.
Supplier Development
- Consistently evaluating vendor performance to ensure adherence to predefined specifications and supply of quality material / execution of job works.
- Negotiating with vendors for improving product quality & reducing lead-time for deliveries.
- Strengthening existing vendor source & developing alternate suppliers.
- Assessing the performance of the vendors based on various criteria such as prices, quality improvement rate, timely delivery, credit terms etc.
- Releasing supply schedules to vendors to ensure on time deliveries
RECOGNATION FOR PERFORMANCE
- OMNEX INDIA – Best Individual Contribution Award
- GTN ENGG – Developing the New Innovation (TPM-Development Management - Member)
- RA PHOENIX – Best Performance award for Supplier QC story analyzing
PROFICIENCY FORTE – QUALITY
Since Jan’1997 RGM Polyester Laminates, Coimbatore
Assignments Handled : Jan-1997 to May-2007
A leading ISO 9001-2000, Designers and Manufactures of Glass Fiber Re In forced Plastics and Rotational Molding Products related to home appliances and Engineering sectors.
The Role
Junior Engineer - Quality Assurance
- Responsible for supplier and in process quality
- Responsible for new product development.
- Exposure in Supplier Technical Support & implementation of continuous improvement activity
- Root cause and analysis of non conformity products
- Exposure in Instruments handling
- Exposure in calibration of instruments and gauges
- Maintaining and updating of the calibration record and master list of instruments.
- Responsible for implementation of system in quality
- Responsible for sample and pilot batch inspection
- Handling of customer complaints and implementation of corrective action
- Responsible for MR related activities
- Exposure in Conducting System audit, Final Product audit and process audit.
RECOGNATION FOR PERFORMANCE
- RGM – Best Service Excellence award for Year of 2001-2007
TRAINING
- Problem Solving Techniques
- ISO 9001 :2001 - Internal Auditor
- 5s Techniques
- Auto CAD
- SAP-MM

[Guest]

BIO-DATA
NAME : S. JEEVAPRIYA
QUALIFICATION : 10TH PASS
TECHNICAL KNOWLEDGE : ITI (ELECTRONIC MECHANIC)
70.4%
COMPUTER KNOWLEDGE : DTPO
DECLARATION
I HERE BY THAT ABOVE DETAILS ARE TRUE TO MY KNOWLEDGE, IF NOT ANY ACTION CAN BE TAKEN ON ME.
YOURS TRUTHFULLY
(S. JEEVAPRIYA)
PLACE :
DATE :

[Guest]

i am electrical engineer. i want to job

[Guest]

I have completed Diploma in Mechanical Engineering in 2012 April,
& i am seeking for job

[Guest]

KARTHICK S A
Email : karthicktgode AT gmail.com

CAREER OBJECTIVES
Young, enthusiastic & energetic professional looking for a lucrative career where I can have challenging environment to develop my skills.

EDUCATION
School / Degree Year School / University Percentage/CGPA
Bachelor of Mechanical Engineering 2008- 2012 St. Joseph’s college of engineering,
Anna University. 6.97
12th 2006-2008 Vidhhyaa Vikaas matric. Hr. Sec. School 81%
10th 2005-2006 Vidhhyaa Vikaas matric. Hr. Sec. School 87.8%
TECHNICAL SKILLS
Area Technology
Operating System Windows 9x/XP/7
Tools Auto CAD, CATIA, Ansys, Pro-E ,Solid works
AREA OF INTEREST
- Manufacturing technology
- Design of transmission system
PERSONAL SKILLS
- Can be able to work in a team very effectively.
- Leadership qualities.
- Adjustable to any environment.
- Good problem solving abilities.
INDUSTRIAL EXPOSURE
- Underwent in plant training in “RANE VALVE Ltd”.
- Industrial visit in “UCAL Fuel Systems”, “CARBORANDUM India” and “DIAMOND Engineering”.
EXTRA CURRICULAR ACTIVITIES
- Membership in “Society of Automotive Engineers”.
- Completed courses in yoga.
PROJECTS WORKS
- Mini projects on Design and fabrication of “WIRE DRAWING MACHINE”.
- Main projects on “MODELLING OF FRICTION WELDING PROCESS ON COPPER AND AUSTENITIC STAINLESS STEEL USING ELMAN BACKPROP NEURAL NETWORK”.
.DECLARATION
I do hereby declare that the information provided above is true to the best of my knowledge and belief.
Place : signature
Date : (KARTHICK.S.A)

[Guest]

I am Ganesan from CRI PUMPS PRIVATE LTD. I have 11 yrs experience in sourcing development and value engineering. I had studied DME and i am doing B.E from C.I.T(coimbatore)