Uhde India Ltd Mumbai Vikhroli : Piping Area Engineer

[Admin]

AREA ENGINEERS - PIPING
Location: Mumbai
Ref No.: PI/15

The incumbent must have hands-on experience in developing piping layouts for Chemical process plants. Experience in 3D-PDMS / PDS preferred.

The company offers professionally rewarding opportunities to work in India & abroad on technologies from the world’s best licensors. Compensation package shall match the best in the industry.

For outstation candidates, accommodation will be provided in Mumbai as per Company Policy.

Your Contact : Ms.Balbir Tathgir, Sr.Manager (Personnel & Human Resources)
Tel : 91 22 6796 8538
Fax : 91 22 2578 6182
E-mail : balbir.tathgir@thyssenkrupp.com

[saurin dave]

RESUME

SAURIN A. DAVE

13,Nutan Patidar Society, Vallabhvadi, Maninagar, Ahmedabad-380008
(: 91-079-25462146 (R), 91-98240 49546 (M), *: sau_dave@yahoo.co.in

OBJECTIVE:
¨ Looking forward for a challenging assignment where my abilities, strengths and skills can be used in mature growth oriented company.

COMPUTER SKILLS:
Operating Environments : Dos, Windows – XP, NT
Packages : MS-Office – 2003

WORK EXPERIENCE (Total 11 years):
Company’s Name Designation Duration Job Responsibility
Doshion Veolia Water Solutions Pvt. Ltd. Ahmedabad Assistant Manager (Project) Feb 2007 TO Till date
Project execution & site management based on water management services.

Rushabh Chemicals Sanad- Ahmedabad Plant In charge (Process) July 1999 TO August 2001
Looked after the production of Dyes intermediates Like GAMMA Acid Acid , G-Salt & Many Other products.

OM Laboratories Santej- Mehsana Production Manager (Process) September 2001 TO JAN 2007
Looked after over all Production, Maintenance, Production Planning, Process Transfer & R & D Work. Good Knowledge of all the Process (Distillation, Extraction etc.) of Solvent Base Chemical/Pharmaceutical Plant

TECHNICAL EXPOSURE:
· Erection & Commissioning of Water treatment Plants such as Reverse osmosis, De-mineralisation and cooling tower plants
· Good knowledge of Erection of heavy equipments with safety, interconnecting piping, Erection of supports, cable trays, Electrical Panels & Commissioning the plant in time period as a Site In charge.
· Knowledge of working on Grignard Reaction, solvent recovery by different distillation methods.

JOB RESPONSIBILITY:
Independent handling of Project execution & planning :
· Basic Engineering: - Development of PFD’s, P&ID’s, Process Calculations, Pipe Schedule, Valve schedule, Pump Hydraulics Etc.
· Detail Engineering: - Review of Engineering Documents & Design basis included in the order.
· Verification & Completion of P& I Diagrams, Technical Information in the Equipment list and updating the list after proper sizing of equipment, piping, Instrumentation Etc
· Responsible for getting approval of all Engineering documents and drawings of various streams such as process, Mechanical, Electrical and Instrumentation from clients - Consultants.
· Preparation of Inquiry specification, obtain technical clearance from client, order specification, Checking of sub vendor drawings & communicating with sub vendors.
· Bill of Quantity (Material) for Mechanical Equipments and Valves, Process datasheets, Obtaining Statutory Approvals and all engineering approvals from consultants.
· Preparing Billing breakup and billing Schedule with the milestone dates for the entire project.
· Operation and maintenance Manuals, Co-Ordination with the site engineers for the requirement of materials on need basis.
· Working on site as a Site In Charge & have a good knowledge of Erection, Fabrication, Manpower Management, Welding & Cutting, Documentation for Site Planning & Site Closure.

PROJECT DETAILS
· From Oct-2008 I am working as a Project Manager of IOCL– Barauni Project. The total cost of the project is 2500 Laces.
· From Dec-2007 To Sept- 2008, I worked as a Site In charge in Hindustan Zinc Limited (Phase- 3) – Rajasthan Project. The total cost of the project is 1600 Laces.
· From Feb- 2007 To Nov- 2007, I worked as a Site In charge in Hindustan Zinc Limited (Phase- 2) – Rajasthan Project. The total cost of the project is 3100 Laces.

STRENGTHS:
¨ Honest, Sincere and Hardworking.
¨ Good Listener & Fast Learner.

PERSONAL INFORMATION:
¨ Date of Birth : 28/11/1976
¨ Nationality : Indian
¨ Marital Status : Married
¨ Languages Known : English, Hindi, Gujarati
¨ Father’s Name & Occupation : Ashok D. Dave, Retired Government Servant

CURRENT CTC: 3.7 Lac per Annum

Expected Salary: 6.3 Lac Per Annum

I here by affirm that the information provided above is true to the best of my knowledge.

(SAURIN DAVE)


Date:

[Guest]

CURRICULUM VITAE

AKANKSHA S.THAKUR
Cell : E-mail :akankshathakur2004 AT yahoo.com

Aspiring for opportunities in any Industry preferably in the Service Sector

EDUCATION
Masters of Commerce (M.Com ), Mumbai University.
Bachelor of Education (B.Ed ), Mumbai University.

WORK EXPERIENCE
- Teaching Experience in Primary Section for 5 years.
- Worked as a Receptionist with Akay Industries for 2 Years.
- Presently working with Consite Engineering Co. Ltd as Receptionist since 2006.

JOB ROLE PERFORMED
- Attending Incoming and Outgoing Calls.
- Drafting and Sending E-mails to Customer and Suppliers.
- Drafting Reply letters in response to Inward correspondences.
- Sending Follow up letters to clients.
- Attending visitors.
- Distribution of Inward Mails to the concerned Departments.
- Assisting Engineering Department for submitting tenders.

[Guest]

SUSHIL D. KHARAT
email : -sushil8851 AT gmail.com
Career Objective
A competent professional with qualitative & rich experience in general administration, personnel management, training, liaisoning & security, corporate policy implementation & disaster management across assignments. A keen communicator with the ability to relate to people across all hierarchical levels in the organization.
Brief Overview
Over 5 years of Corporate experience in the areas of General Administration
- Office Administration
- Vendor Management
- Purchase Management
- Statutory Compliances
- Facility Management

Professional Summary
Supreme Infrastructure India Ltd.
Duration : May-2009 - till date
Designation : Officer- Administration
Scope of Job :
- Administration Function
- Responsible for day today managing use of office space, warehouse space for company facilities. This involves responsibility for purchases of capital & other goods/assets and liaison with estate consultants.
- Responsible for Political matters, Hospital matters, Court matters and Police Matters.
- Responsible for all asset movements & their appropriate accounting.
- Responsible for maintenance and upkeep of Company guest houses and facilities.
- Attendance recording & monitoring utilizing the Access Control devices & associated software.
- Responsible for site and Head Office Coordinator.
- Monitoring labour welfare activities.
- Responsible Hospitality Management for Labour welfare.
- Physical security - Oversee functioning of Security Guards & manage the visitor, vehicle &vendor movement into & out of the premise.
- Administering special events like seminars, festivals, dignitary visits, conferences, organized informal interactions etc.
- Control & Operate Company owned vehicles including all regulatory compliances for both drivers as well as vehicles.
- Responsible for maintenance and update of Data card, internet, telephone, electricity connections, etc.
- Vendor Management
- Responsible for negotiations with contractors, service providers, and vendor selection. These would include courier companies, car rentals firms, Stationery, etc.
- Responsible for managing Facility Management staff and dealing with vendors who manage facilities services.
- Responsible for all business stationary needs including coordinating with internal customers with respect to needs & liaison with suppliers.
- Responsible for purchase of all company owned cars and to ensure timely Insurance renewal & adequate coverage thus protecting valuable company assets.
- Responsible for effectively co-coordinating the activity of the company canteen.
- Responsible for preparing the Administration MIS and compiling special analytical reports to management that brings about cost reduction.
Statutory Compliance :
- Responsible for the Coordination with vendors to ensure agreements and licenses are renewed within the stipulated time frame.
- Ensure compliance to various existing laws and regulations as well any other regulations that might come in effect from time to time is addressed effectively
- Work with agencies to get the required agreements and license renewed within the stipulated time frame.
Vintex Fire Protection Pvt. Ltd.
Duration : Feb-2007 to Apr-2009
Designation : Assistant-Administration.
Scope of Job :
- Preparing & updating administration costing on monthly basis.
- Checking mobile & telephone costing on monthly basis.
- Responsible for maintenance and upkeep of Company guest houses and facilities
- Making the necessary arrangements for the client visits.
- Checking stationery & Printing and vendor Bills.
- Preparing purchase orders & cheque requisitions.
- Preparing transport costing and arrangement.
- Interacting with the Airtel/ Vodafone service providers.
- Physical security - Oversee functioning of Security Guards & manage the visitor, vehicle &vendor movement into & out of the premise
- Handling Inward as well as outward domestic / International Courier.
- Responsible for maintenance and update of Data card, internet, telephone, electricity connections, etc.

Golden Plastics Pvt. Ltd.
Duration : Jan-2006 to Feb-2007
Designation : Office-Assistant.
Scope of Job :
- Maintaining tea-coffee stock.
- Handling of courier and its billing
- Distributing stationery.
- Follow up for the vendor payments.
- Maintaining Product Stock
- Day to day support for administrative work.

Technical Skills
- Operating Systems : Windows 2000, XP-2/3.
- Programming Languages : C, C++, C#, XML, HTML, JavaScript, .Net Technologies.
Academic Qualifications
- T.Y. Bsc.(Computer Science) from Mumbai University
- H.S.C from Mumbai Board with Second Class Division in the year 2006
- S.S.C from Mumbai Board with Second Class Division in the year 2002

[Guest]

CURRICULUM VITAE
Gorade Akshay Bajirao
Email : gorade.akshay AT gmail.com

Career Objective
To secure a challenging and responsible position in which my experience and education will have valuable application.

Academic Qualification
Pursuing BE Mechanical From Lokmanya College of Engineering.
Aggregate Percent :- 57.08%
Examination Specialisation Month and Year of Passing
School/College Board/University Percentage
B.E Sem VII Mechanical
Engineering Dec 2010 Lokmanya Tilak College of Engineering, Navi Mumbai.

Mumbai University
65.12%
T.E. Sem VI Dec 2010 54.35%
T.E. Sem V Dec 2009 59.76%
S.E. Sem IV Dec 2009 57.29%
S.E. Sem III May 2009 58.58%
F.E. Sem II Dec 2008 52.00%
F.E. Sem I Dec 2008 52.35%
H.S.C.
N/A
March 2007 National Sarvodaya College Maharashtra State Board 70.00%
S.S.C.
N/A March 2005 Swami Vivekanand High School Maharashtra State Board 67.06%
Project Profile :-
- B.E.( Final Year ) Project

- Project Name : Electricity generation from exhaust gas of a single cylinder 4 stroke diesel
engine
- Guide : Mr. Sandeep Joshi.
- Description : This project involves fabrication of a device which can use heat contained in
exhaust gas to produce electricity to illuminate that particular area , in this project the exhaust gas which goes waste , was utilized to produce electricity
Computer Skills :-
- Ms office
- AutoCad
Extra-Curriculum Activities :-
- Volunteered in different Cultural Programs organized in Lokmanya Tilak College of Engineering, koparkhairane.
- Active Member of the LTCOE Social Cell, a student’s association working for the betterment and welfare of the society.
- Active Member of Indian Society for Technical Education

[Guest]

CURRICULUM VITAE :
Sarode Vishal
Email : – sarode99 AT gmail.com

SCHOLASTICS
2010 Mechanical Engineering (B.E.) from MMCOE, Pune University with 52.38%.
2006 Class XII from Kendriya Vidyala, Ojhar, CBSE with 59.00%.
2004 Class X from GES-HAL, Ojhar, Maharashtra Board with 72.00%
PROFESSIONAL CREDENTIALS
2012 Piping Design Engineering & Construction (P.G.D) from AAPT, Pune with Distinction.
- Preparation of Plot Plan, Piping Layouts, Equipment Layout, G.A Drawings, Piping isometrics and Line list by using P&ID with Costing.
- Conversant with international codes and standards like ASM B31.1, ASME B31.3, ASME B31.4.
- Pressure design of Process Piping and Component as per ASMEB 31.3.
- Preparation of preliminary valve MTO, Final MTO.
- Static and Dynamic analysis of piping systems.
- Knowledge of designing of Tank farm, Pipe Racks, Expansion loops, Jacket piping etc.
- Plot plan, Process plant layout, PFD and P&ID, Equipment drawings, Pipe Welding.
- Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning.
- International Design codes & Dimensional standards. Viz : ANSI/ASME, API, BS, ASTM, DIN & there use in design, analysis and calculation.
Project Title : PLANT DESIGN FOR PRODUCTION OF OIL.
Organization : ASIAN ACADEMY OF PROFESSIONAL TRAINING.
Description : In this project we did the equipment layout (plan and elevation), nozzle orientation and piping general (plan and elevation) arrangement. After that did calculations for stress acting on pipe internally as well as externally by using standard formula and nomographs as per ASME B 31.3 and then did floor height calculations’ and ladder calculations. Finally drawn the equipment layout (plan and elevation), piping arrangement (plan and elevation) and Isometrics by using software like Auto CAD as well as Pro Pipe software.
COMPUTER SKILLS
Designing Software : PDMS, Pro Pipe, AutoCAD 2010, Caesar-II, CATIA V5R17
Tools : Ms-Office, Outlook Express
Operating System : Windows-XP/ Vista/7, Ubuntu, Mac
Others : C, Operating ERP, Hardware & Networking (Basics), Programming Injection Molding M/C
ACADEMIC PROJECTS
Project Title Design & Manufacturing of Grooving Machine.
Organization M.M.C.O.E.,Pune
Role Coordinator
Duration 6 months (2009-10)
Description The machine manufactured, provides easily the groove on stud’s of different material. This Machine is able to size different groove on stud. It’s a kind of small milling machine. Major advantages were the less production cost and performance of operation is simple as it does not require skilled labor. The project has been drafted, designed and tested for its safety & simplicity.
- Features of the project are : Low manufacturing, Ergonomic design, Simplifying the cutting procedure, Rigidity of machine ,Better & Quick productivity
INDUSTRIAL WORK EXPERIENCE
- Organization : SAPL (SARDESAI AUTOPARTS PRIVATE LIMITED), PUNE.
- Experience : Eighteen Months ( 01/07/2010 to 31/01/2012)
- Designation : Production cum Quality Control Engineer
- Company is OEM manufacturer of major plastic automotive components.
- Programming Injection molding m/c.
- Responsibilities such as; Production & Quality aspects of products; Managing & Supervising- Injection molding m/c & operators.
- Updating Shift Analysis, NCR, TPM & has sound knowledge of ERP.
- Conducting Internal audit, Inspection, Process Chart, PDCA, APQP (new development), PPAP, SPC, 5s activity & Lean management.
- Participated in Kaizen Event successfully organized by TML (Tata Motors Ltd) : completed 4 projects.
- Introduced Poka Yoke methods, made 5 projects in company.
- On regular basis carrying out Waste & Rejection management along with Recycling practices.
- Preventive maintenance, Operators training, maintain hygiene and cleanliness in the plant.
- Maintaining Heat Ageing Test of Degassing Tanks.
- Made 14 no’s of Jig-Fixtures for plastic products for process enhancement.
INDUSTRIAL PROJECTS
Project Title Mould Runner Detecting System : Industrial Safety Product
Organization SAPL, Pune
Duration 2 months (Oct’10-Dec’10)
Description
- Designed & manufactured a System, which detects the left runner in the mould.
- This absolutely prevents the mould damage, time and increase the production.
- Successfully working system installed on 2 machines.
- Thus ultimately leads to Process control enhancement.