CAE-Crash, Safety Engineer Bangalore : Geometric soft

[Admin]

CAE-Crash and Safety

4 to 8 years experience with strong Automotive domain experience in Hypercrash V 2.7 and RADIOSS
Experience in MADYMO will be an added advantage

Location – Bangalore

Please send your resume to cae-cv@geometricglobal.com with the position title in the subject line.

[Guest-IJT]

ANOOP.K.U Mobile : +91 -
E-mail : anoopkoothoor AT gmail.com
Professional summary
- Over 5 years of experience in technical activities and in Design & Costing of Electrical and Telecom products,. Currently finished contract with Electro Industries Jeddah. as Design engineer at engineering department , Kingdom of Saudi Arabia.
- Experience with installation and operation and maintenance of both HT & LT Transformers, feeders and substation up 220 KV rating.
- Graduate in Bachelor of Engineering specialization in Electrical and Electronics Engineering
- Proven skills in managing teams to motivate a group of junior engineers, draftsman’s & technician to achieve a good results in parameters and motivating them for archiving business and individual goal.
- Experience in Electrical load calculation, Solar energy system design, SLD preparation, production and planning scheduling in various organization.
Professional Achievement
- Hands of experience gained international tender preparation, drawing detailing, product development & good knowledge in IEC ,ASTM, Standard related to IP protection and Type tests for products & service.
- Senior consulting engineer with international test laborites like CPRI Bangalore, KEMA, SASO Saudi Arabia.
- Tested and certified more than 700 No’s distribution transformer at KSEB transformer production unit, Shroanur, India.
- Developed 7 new products to Saudi Electricity board (SEC) & 3 products to Qatar electricity board.(KAHRAMA)
Professional Experience - 5 + years
Current Employer - ELECTRO INDUSTRIES, Jeddah, KSA
Job Title - Electrical Design Engineer

Job Description -
Looking after all the technical activities related to Electro Industries product development. Production schedule, Project coordination , Design & Costing preparing of Tenders, and supporting the Sales Team. Most of the products are using for Electrical distribution and Metering, Protection area. The Products are Distribution meter boxes, Feeder pillars with Fuse rails & Breakers, Current transformer & low voltage breakers.

Summary of Key Responsibilities –
1. Sales and Marketing related-
- Manage Client details, Giving Solution for technical parameters from vender side.
- Preparing technical specifications for the tenders, follow-up on payments, and market research for achieving specified targets for the company and Product quality.
- To coordinate & manage material clearance from QC lab for Electrical Industries product range
- To procure all the necessary materials required for the installation of equipments & Product design.
- conducting demonstration, presentation and training to the employees on both production and costumers side.
- Provide technical and application support to costumers, manage, and maintain relationship with key costumers.

2. Engineering Development related-
- Design, Costing, Drawing detailing, arranging approval and permission from various department for production .
- Preparation of Bill of materials for new & modified products.
- Design of SLD for showrooms, building, Industrial lighting, machines cabling layout.
- Liaise effectively with customers in job planning, execution, follow-up and sales support, and internally with engineering departments, manufacturing, and Sales team.
- Keeping up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner.
- Working with experienced field engineers on basic troubleshooting, installation, maintenance and service repair needs on designated equipment.
- Load calculation for building ,industries, LED advising screens & Television. Solar energy system design.

- Knowledge about plastic molding such as injection, SMC molding.



Previous Employer - Eltel Industries Pvt Ltd, Bangalore
Job Title - Product Engineer
Job Description –
Joined as product engineer trainee for design and development of testing and measuring instruments for a short period ( 4 months). Specialized on capacitance and tan delta measuring system, which can automatically measures capacitance, dielectric loss, dissipation factor/power factor, excitation current, and inductance of electrical insulation by the Test Voltage up to 12kV.
Summary of key Responsibilities –
- Product development of the instrument.
- Developing test programs to debug, characterize and production testing of digital ICs.
- First quality assurance of the instrument by doing proper testing procedures.
- Installation, Commissioning, calibration, and troubleshooting of the testing instruments which are used in power sector (CRM, TRM, Capacitance and Tan Delta etc that are used for the testing of the substation equipments like Transformer, Circuit breaker etc.)
- Managing costumer record for future calibration of the instrument

Previous Employer - Kerala State Electricity Board.
Substation 220 KV & TMR Division
Job Title - Assistant Engineer
Job Description –
Operation, Installation and maintenance of 220KV substation. Load flow analysis of various substation and feeders. Knowledge of various protection, communication and testing diagrams. Junior engineer for production and maintenance of distribution transformers up 500 KVA. Good knowledge in Ratio testing ,Short-circuit testing, OC testing and efficiency calculation

Summary of key Responsibilities –

- Design of Single line diagram of substation & Panel board wiring for HT & LT feeders.
- Design of Battery system, Fire fighting system. Cable scheduling and control wiring.
- Assisting testing of various types of relays, CTs, PTs, Breakers & Transformers.
- Operation & Trouble shooting of various types of breakers ,isolators, earth switches, relays, power transformers, Compressors
- Installation of switch gears & different types of electrical apparatus.
- Transformer oil filtration and BDV testing, Inspection of both HT & LT coil winding.
- Tanning of new employees and apprentices in various testing and operation.
Software knowledge -

Auto cad 2010,Solid work 2010. MS Office 2007 .

Trainings Undergone -
- Familiarization program on Thermal power plant conducted by NTPI at Chennai
- Foundation in Electrical CADD at Cad Centre Thrissur.
- Completed health and safety training held at 220 KV substation Shoranur.
- Training on Great plain software for industrial production planning.

Educational qualifications –

- B.E in Electrical and Electronics engineering from Rajalkshmi Engineering college under Anna university with first class (69%) in the year of 2005.
- Diploma in Electrical engineering from government polytechnic Perithalmanna under Kerala technical education with first class with distinction (80%) in the year of 2002.
- P.D.C in Science from S.V.N.S.S college wadakanchery under Calicut university with Second class (59 %) in the year 1999.
- S.S.L.C from St; Joseph H,S Pangarapillay with first class (71%) in the year of 1997

[Guest]

Resume
Ananth.H.R
Email id : hrananth005 AT gmail.com

Definition :
A BE in Mechanical Engineering (ME), Sapthagiri College of Engineering, Visvesvaraya Technological University.
Career Objective :
To join an organization, which will provide me wide Exposure, Sufficient responsibilities and the Opportunity to learn and enhance my Knowledge. To work ably by applying my existing knowledge and to enhance career growth while contributing to the success of the organisation.
Academic credentials :

Si No.
Course University /Board Percentage Year of Passing
1 B.E(Mech) Visvesvaraya Technological University 62.00 2011
2 Pre-University Karnataka
Pre-university Board 63.16 2007
3 10th CBSE 67.80 2005
Certified courses :
CATIA V5.
Academic Project Details :
Title : Tribological Aspects of Aluminium Base Hybrid
Composites
Duration : 3 months.
Team size : 4
Tests conducted : Microstructure, Micro hardness, wear and friction test
Description :
The objective is to increase the hardness and wear resistance of Al7075 by TiO2, Gr reinforcements. Specimens are subjected to 4 types of Heat treatment to increase hardness and wear resistance.
Technical Skills :
- Tools worked on : SOLID EDGE, ANSYS, Cad M, and CATIA V5.
Extra-curricular activities :
- Represented school for kho kho in cluster level.
- Actively participated in NCC.
Hobbies :
listening music, reading novels and biographies, internet browsing, playing cricket.