Piping Stress Analysis Engineer job Bangalore CAESAR II : www.cranessoftware.com Cranes Software International Ltd

[harisbarvi]

Cranes Software International Ltd
cranessoftware.com
www.cranessoftware.com
www.nisasoftware.com

Hi! I am Haris (HR) from Cranes Software International Ltd, We have a job requirement so thought of sharing with you......

Cranes Software International Ltd is one of the world leaders in computer aided engineering and analysis. Its product ‘NISA’ is one of the industries most comprehensive engineering analysis suites addressing the Automotive, Aerospace, Energy & Power and Civil engineering fields. Highly-skilled scientists, technology architects and software engineers are engaged in the development of NISA. They work closely with their global customers to provide solutions in the areas of Stress Analysis, Seismic Analysis, Vibration Analysis, Composite Material Analysis, Fatigue Analysis, Thermal Analysis, Computational Fluid Dynamics, PCB Analysis, Electromagnetic Analysis and Civil Structure Analysis.

For Further Details please visit our site: www.nisasoftware.com

Cranes Software International Limited is a global corporation offering scientific and engineering products and solutions to clients worldwide. It has its presence in 39 countries across the world and has a customer base of more than 360,000.

If you have the below mentioned skills and willing to take up the challenge please send your updated resume to haris.ali@cranessoftware.com along with the following details:
· Current CTC
· Expected CTC
· Notice Period

We are looking forward to hire highly skilled professional for the following position:
Position: Engineer Consultancy Services
Qualification: BE/ME - Mechanical
Experience: 2+ years of experience.
Required Skills:
· Piping Stress Analysis
· Expertise in Ceaser
· Other FEA Tools
Job Location: Bangalore

Regards!

Haris Ali
Senior Executive - Human Resources
Cranes Software International Ltd.,
Visit us at www.cranessoftware.com

[Guest-IJT]

Name : Uttam kumar naskar
Email : naskar.uttamkumar AT gmail.com
Designation / Skillset : ITI-Mechanical
LOOKING FOR A JOB

Resume :
CURRICULUM – VITAE
UTTAM KUMAR NASKAR
OBJECTIVE : ANY ENTRY TO A PROFESSIONAL ORGANISATION TO WORK WITH
HONESTY LOYALTY & DEDICATION.
SKILL : HARD WORKING & COMMITTED.
ACADEMIC QUALIFICATIONS :
NAME OF THE
EXAMINATIONS NAME OF THE
BOARD/UNIVERSITY YEAR OF
PASSING (%) OF MARKS REMARKS
H.S W.B.C.H.S.E 2005 52% 2nd Div.
MADHYAMIK W.B.B.S.E 2003 62% 1st Div.
TECHNICAL QUALIFICATION :
Board / University Institution Year of Passing Trade Percentage of marks / grade
S.C.V.T GARIAHAT I.T.I 2008 M/C GRINDER 74%
OTHER OUALIFICATIONS :
1. BASIC KNOWLADGE OF COMPUTER
2. CERTIFICATE COURSE ON AUTOCAD (2D & 3D) FROM CMC(KONNAGAR)
OTHER ACTIVITIES : ATTENDING QUIZ.
EXPERIENCE : ONE YEARWORKING EXPERIENCE
IN TIL Tractor India.Ltd.


I HERE BY DECLARE THAT THE ABOVE PARTICULARS ARE TRUE AND CORRECT TO THE BEST OF MY KNOWLEDGE & BELIEF AND IN THE EVENT OF ANY INFORMATION BEING FOUND FALSE OR INCORRECT, MY CANDIDATURE WILL BE LIABLE TO BE CANCELED.
Place :

Date :
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4445907
Date & Time : 4th Aug 2011 5:05 PM (UTC)
IP Address : 110.227.142.183
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 BTRS25396 Firefox/3.6.18
Predicted Country : Australia

[Guest]

Anup Gandhi
E-Mail : gandhianup1 AT gmail.com
CAREER OBJECTIVE :
To pursue a career in Piping Engineering & Design in an Organization that provides an opportunity to make strong contribution to organization goals and to further advance my acquired skills and educational background.
EDUCATION :
2009-10 : Post Gaduate Diploma in Piping Engineering and Design from M.I.T , Pune with Distinction
2004-08 : B.E. in Mechanical Engineering from VPCOE , Pune University with First Class
2002-04 : XII from maharashta board with Distinction
PIPING TECHNICAL PROFILE :
- Experience in the field of basic and detailed engineering activities such as Pipe Routing, Support design, Generation of Layouts, Isometrics. Generating reports, Preparing Bill of Materials & MTO.
- Exposure to Piping Stress analysis (using CAESAR II) of lines connected to Heat Exchangers, Columns, Pumps, Storage Tank and Rack Piping etc.
- Routing of piping & designing as per the system requirements using P&I Diagrams and as per the required standards
- Design and Engineering for piping general arrangement drawings, Isometrics, BOM as per Specifications and Piping supports for Refineries, Petrochemicals, Power and other process industries
- Responsible for pipe thickness calculations, Material selection, pressure drop and Line Sizing calculations.
- Equipment drawings including Heat Exchangers, tanks and other Plant equipment design & drafting.
- Complete reverse engineering of Equipment, Piping and Isometric drawings.
- Interference checking of piping with other equipments, structures.
- Familiar with standards ASME, API 650, API 620, ANSI, ASTM
EXPERIENCE :
JUNE 2010 – till Date Mold-Tek Technologies Ltd, Hyderabad as a Piping Design Engineer
Projects done in Mold-tek Technologies Ltd.
1) Project : Paradip Oil Refinery, Orissa
Client : IOCL
Designation : Piping Design Engineer
Software : CAESAR II
Role : Stress analysis of given lines
Responsibilities :
- Modeling of the systems connected to Pump, Vessels, Heat Exchanger, Columns, Tank and Rack Piping, PSV lines.
- Load case preparation for Wind Load, Seismic Load, PSV Load and Pump Cases.
- Static equivalent Wind and Seismic analysis.
- Stress analysis for line connected to heat exchanger, Column, Vessels.
- Check the Nozzle Load for the Equipment with Code or Vendor requirement.
- Check the Nozzle Flexibility
- Node Marking, Support Marking, Support Tagging, Forces and Moment at Nozzle in isometric from CAESAR Output File.
- Report Generation
2) Project : Water System Facilities for Structural Mills
Client : Tata Projects Limited
Designation : Piping Design Engineer
Software : CAESAR II
Role : Stress analysis of given lines
Responsibilities :
- Modeling the systems according to given layout drawings
- Providing supports and Analysis
- Generation of isometrics with Node Marking, Support Marking, Support Tagging in Output File
- Report Generation
3) Client : Aker solutions USA
Projects 1) Carolina
2) Sea Drill - 14
3) ODE III
Designation : Piping Design Engineer
Software : PDMS 11.6
Role : Piping Design, Support Design and Detailing
Responsibilities :
- Routing the pipes based on P&ID and Plot plan
- Preparation of piping layout as well as equipment layout
- Piping Components calculations and Preparation of VDS
- Checking pipe routing and Clash checking
- Preparation of Isometrics and BOM
- Designing the Pipe Supports as per the Analysis Reports for Critical and Non Critical Piping
- Detailing of pipe supports through PDMS DRAFT
- Preparation of General Arrangement Drawings and Piping layout
SOFTWARE SKILLS:
Proficient in the following software:
- PDMS
Design module: Equipment, Pipe work , Structural Design, Support Design
Draft module: Piping layouts, Labeling, Support drawings
ISO-draft module: Extraction of isometrics
- Smart Plant 3D
Design module: Equipment, Pipe work , Structural Design, Support Design
ISO-draft module: Extraction of isometrics AutoCAD
- CAESAR II
- NAVIS
- AUTO CAD

[Guest]

Mr. TONY THANKACHAN
ttony26 AT gmail.com
PIPING ENGINEER
Career Objective :
Looking for a challenging and demanding position in Piping Design and Engineering in a growth oriented Mechanical Consulting, Contracting, Construction organization to render professional skills and add value to organizational growth and objectives.
Software skills :

1. Engineering Analysis : - CAESAR- II (STATIC analysis)
2. PDMS :- MODULES
a. Equipment modeling
b. Piping Modeling
c. Draft
d. Isodraft
e. Structure modeling
f. Support Modeling
3. PRO E
4. Solid works 3.5
5. AutoCAD
6. Ansys Multiphysics 10.0
7. Lab view 7.1
Academic Qualification :
- B.E (Mechanical Engineering) from PSNA college Of Engineering and Technology, (Anna University,Tiruchirapalli),Dindigul,Tamilnadu with 66.57% marks
- Diploma in Process Piping Design & Engineering as per ASME B 31.3 from Institute of Piping Engineering and Building Services, Hyderabad.
- 12th standard (Kerala board) from GOVT H.S.S,Konni,Pathanamthitta,Kerala with 81% marks.
- 10th standard (Kerala board) from M.B.E.H.S.S,Pathanamthitta,Kerala with 84% marks.

*Knowledge of - PFD and P&ID
- Equipment drawings
- Plot plan
- Process plant layout

*Familiar with - International Design codes & Dimensional standards.
Viz : ANSI/ASME, API, BS, ASTM & there use in design, analysis and calculation
B.E PROJECT
1) Main Project : Design of SLURRY PUMPING SYSTEM.(Indian Rare Earths Ltd,Chavara,Kerala)
Scope of the project :
This project consists of designing of slurry pumping system considering power, discharge ,head, quantity required.
2) Mini Project : MULTI SPINDLE DRILL CHUCK
Objectives :
Drilling of three holes at a time with a single drill chuck.

[Guest]

RESUME

SWATI ROY

Email : swati.roy765 AT gmail.com
CAREER OBJECTIVE :
As an enthusiastic and innovative young professional, my aim to reach a responsible and challenging position in a performance oriented and diversified organization, using my knowledge and experience.
PROFILE :
- Quick Learning Curve.
- Ability to learn new concepts and technology within a short span of time.
- Self-motivated, hardworking and goal oriented with high degree of flexibility, creativity, commitment.
- Good communication skills, verbal as well as written, coupled with good presentation and intrapersonal skills.
- Ability to perform above expectation.
EDUCATIONAL DEVELOPMENT
Year
Stream
Name of the Institution Grade Point or %
2011 B.E. (Information & Technology)
(Bachelor of Engineering) NITM-IT, Ragiv Gandhi Technical University, Gwalior- M.P. 74% *
2006 12th Std
(Science) Bihar Intermediate council 60%
2004 10th Std Bihar board 74%
*Aggregate of 8 Semesters
MAJOR PROJECT :
Title : Inventory and Sales Management (Java Based)
Tenure : 6 month
Key Role :-
- Work as a software Developer.
- Maintaining and updating the database of goods.
- Analyzing and coding the program.
- Scanning and collecting data of program and approaching modules with documentation to solve the program problems and finally made the output.
MINOR PROJECT :
Title : File Manipulation Operations- Zipping, Unzipping, Splitting, Encryption and
Decryption (Java Based)
Tenure : 6 months
Key Role :-
- Work as a software Developer.
- Analyzing and coding the program.
- Scanning and collecting data of program and approaching modules with full documentation to solve the program problem or take some action.
TRAINING :
Title : GSM
Organization : BSNL, Indore (M.P.)
Tenure : 45 Days
Key Role :-
- Checking how the data packets are send on the transmission line.
- Testing the proper communication between the two terminals.
- Testing for the proper connection between the two terminals.
TECHNICAL KNOWLEDGE :

- Languages : C, C++, Java (Core & Advance), HTML ,Mysql, Data Structure,CSS
- Operating System : Window xp, 2000, 2007 & Window Vista.
- Applications : MS Office(2003,2007 & 2008), Web Applications(Mozilla Firefox, Opera Mini )
EXTRA CURRICULAR ACTIVITIES :
- Won prize Quiz Contest for the academic year 2011
- Actively took part in the following activities.
- Sports both in School and College.
- Cultural activities both in School and College.

DECLARATIONS
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.
Place : Bangalore
Date : swati roy