Amiruth Groups Doha, Dubai, Qatar : Design Mechanical Engineer

[mskavi]

Amiruth Groups
http://www.amiruthgroup.com

Designation: Design Mechanical Engineer
Experience: 5 - 10 Years
Location: Doha, Dubai/ UAE, Qatar

Job Description
Preparation of the H.V.A.C Scheme layout, drawings and details, Heat load Calculation, Preparation of Cost Estimate with Detailed bill of Quantities, Meetings with the Contractors and preparing the Techno-commercial Analysis for Comparison

Desired Candidate Profile
B. E Mechanical with 5 to 6 years of experience in designing air conditioning system for buildings. Candidates should have experience in Designing HVAC layout, Fire fighting, plumbing, drainage.

Company Profile
Amiruth Group of companies handle all kinds of construction works & Human Resource Requirement for the parent company BIN THANI GROUP OF COMPANIES at Doha, Qatar and IMEC-INTERCON ELECTRO MECHANICAL WORKS LLC at Dubai.

Email Address: amiruthconsultants@yahoo.com

Keywords: HVAC Engineer , Design Engineer- HVAC, Service Engineer , Mechanical, HVAC , MEP Engineer, Mechanical Engineer, B.E Mech, Mechanical, B.Tech Mechanical, Diploma, CAD, Fire Fighting, plumbing, Drainage

[Guest]

W.Mohammed Azharuddin
mechazhar85 AT yahoo.co.in,mechazhar AT gmail.com

Objective :
To pursue a career in an organization that would mould me into a consummate professional both in my approach and in my attitude and thus resulting in the mutual development of both the organization and myself.
Academic Profile
Course Duration Institution Percentage
B.E.(MECH) 2003-2007 Jaya Engineering College,
Thiruninravur - 602 024 76.72(Distn.)
MBA(Project Management) -Distance Mode 2010-2012 Sikkim Manipal University Ongoing
Additional Certified Courses
- Diploma in Computer Application (DCA)
- Windows Operating System Till Date
- MS-DOS,MS-Office
- Master Diploma in Mechanical Cadd (MCADD)

- AutoCad
- Pro/e
- Ansys
- Catia
- MSC-Nastran
Industrial Exposure
- Underwent Inplant training at Integral Coach Factory (Chennai) in Shell division & Furnishing division for a duration of 8 days
- Underwent Inplant training at Visteon Co.Ltd(Chengalpet) in fabrication of Automobile’s HVAC Components line for a duration of 5 days
B.E.Final Year Project

Underwent final year project in Tracter and farm equipments (TAFE) Pvt. Ltd. Simpson group of companies under the title “Modification in cylinder testing equipment & process layout”
Achievement

Completed my four year course of B.E with no History of Arriers i,e. cleared all the papers in the first attempt and attained Distinction is my most significant achievement
Work Experience

Currently working in ETA(Electro-Mechanical&Technical Associates) Co.LTD,Saudi Arabia as a Project Incharge for Mechanical division which includes :
- HVAC System
- Fire Fighting System
- Plumbing(Water Supply & Drainage)
Projects Handled
- Commercial Projects
1) Al-Manar Plaza (Shopping Mall),Al-Madinah, KSA
CLIENT : Al-Habeeb Real Estate Development
CONSULTANT : Al-Habeeb Real Estate Development
MAIN CONTRACTOR : Al-Habeeb Real Estate Development
ELECTROMECHANICAL SUB-CONTRACTOR : ETA
SCOPE OF WORK : Complete MEP services
JOB RESPONSIBILITIES : Been as a Trainee for a duration of 4 months,looked after all the Mechanical activities completely of site work,attended Field Inspections with consultant & so on.
- Residential Projects
1) Hotel Al - Fal (Multi-storey Residential Hotel),Plot # 2098,Central Area, Al-Madinah, KSA
CLIENT : Fal Holdings Arabia Co.Ltd
CONSULTANT : Sohail Sami Hefzi Consultants
MAIN CONTRACTOR : Mubarak Al-Guthmi Contracting co.
ELECTROMECHANICAL SUB-CONTRACTOR : ETA
SCOPE OF WORK : Electrical,Plumbing & Fire Fighting
JOB RESPONSIBILITIES : Been as a Site Engineer for a duration of 1.5 year & performed the following job activities
- Design Calculations – Plumbing & Fire Fighting
- Preparation of Drawing Schedule & Material Schedule.
- Instructing & guiding Draughtsman in preparation of Electro-Mechanical Co-ordination Drawings ,Shop drawings of services as follows from contract drawings as per site condition & in a profitable way :
- Mechanical(Plumbing & Fire Fighting)
- MEP Builders work (Openings in Structural drawings) from Electro-mechanical co-ordination drawings
- Preparation of Material Submittals & submission of same to consultant
- Dividing the manpower in groups & assigning work to them through the under supervisors
2) Currently working in Taiba Aramas (5-star Hotel), Plots # 3137,3081,3082,Central Area, Al-Madinah, KSA
CLIENT : Al-Aqeeq Real Estate Development
CONSULTANT : Othaishan Consulting Engineers
MAIN CONTRACTOR : El-Khereji Commerce & Contracting Co.
ELECTROMECHANICAL SUB-CONTRACTOR : ETA
SCOPE OF WORK : MEP services
JOB RESPONSIBILITIES : Being as a Project Engineer from a duration of 1.5 years till present, performed & performing the following job activities:
- Design Calculations – Plumbing & Fire Fighting
- Had been along side with HVAC Engr. While preparation of HVAC design calculations & reviewed it.
- Preparation of Drawings & Materials submittal Schedules.
- Instructing & guiding Draughtsman in preparation of Electro-Mechanical Co-ordination Drawings ,Shop drawings of services as follows from contract drawings as per site condition & in a profitable way with application of Codes like NFPA,NPC,IPC etc.& then make submittal of same to the consultant for approval :
- Mechanical(Plumbing & Fire Fighting)
- MEP Builders work (Openings in Structural drawings) from Electro-mechanical co-ordination drawings
- Possess knowledge of HVAC & can Manage HVAC side in any temporary absence of HVAC Engr.
- Preparation of Material Submittals & submission of same to the consultant for approval
- Submitting the work schedule,work progress so far & expected in future in percentage basis to the planning engr.everything only after discussions from my sub-ordinates
- Dividing the manpower in different groups & assigning work to them through the channel of site engrs.-supervisors-foremans

[Guest]

ANIKKUTTAN K.R
Email mailto :anianesh AT yahoo.com
mailto :sajilbnair AT yahoo.co.in
mailto :sajilbnair AT gmail.com
Post Applied for- Jounier Electrical Engineer/Site Engineer

- Bachelor’s degree (B-Tech) in Electrical & Electronics Engineering from an accredited university.
- Experience of Electrical Engineering in residential buildings & textile industry with, hands on construction sites.
- Experience in 220kV substation & ‘Unilec’ energy meter manufacturing industry (part of studies)
- Good command of written and spoken English
Career Objectives
To work for a dynamic organization, committed to quality and which can provide an opportunity to enhance my capabilities and skills, along with the fulfillment of professional and personal goal.
Summary of Skills
- Able to manage time, and completion of work within deadline.
- Able to build good relationships at all levels, internally and externally
- Accurate, efficient, and detail-oriented.
- Self-starter with a ‘can do’ attitude.
- Familiar with Quality Assurance and Inspection procedures.
- Computer literate
Technical Strengths
- Familiar with HV/LV power Transmission, distribution systems and gen sets.
- Knowledge of BMS Automation.
- Knowledge of Energy Transferring Systems (DCP and Chiller systems)
- Knowledge of Boiler operation.
- Knowledge of Fire fighting systems and FACPs.
- Experienced in Electrical, Mechanical and HVAC Schematics and Drawings.
- Experienced in Electrification of residential buildings

Previous Platforms
Global Constructions, India - [From AUG-2010 to Jan-2012]
Designation - Site Engineer (Electrical)
Fathima Engineering Company PVT. LTD - [From July-2007 to May-2010]
Designation - Asst. site Engineer (Electrical)
Key responsibilities
- To supervise the activities, plan for upcoming plan activities, keep vigil on the contractor and coordinate with clients during the execution and commissioning activities.
- To develop and ensure that high-class electrical and power engineering specifications, standards, and procedures are delivered and applied by Contractors on all phases of the Projects.
- To review and approve engineering design activities performed by MEP Contractor and Consultants for all Electrical and power generation and distribution systems related activities.
- To ensure uniformity and standardization compatibility at optimum levels in design engineering in all phases of the project and update company Specifications by incorporating the lessons learned.
- To audit installations during construction, witness Factory and Site Acceptance Tests, pre-commissioning and commissioning of equipment / systems and assures that the installation / performance are in accordance with specifications.
- To witness and approve the FAT (Factory Acceptance Test) for major electrical equipment.
- Follow up with the MEP contractor construction planning and progress on daily basis.
- Support the effort of resolving the pending and punched items during project stages.
- Fully understands the company HSE policy, procedures, regulations and objectives as they relate to area of responsibility. Ensures that work under control is performed in a safe and environmentally sound manner.
- Provide on-site electrical engineering consultation during construction, pre-commissioning & commissioning stage.
- To undertake planned and reactive maintenance tasks on electrical, control, mechanical and building fabric systems.
- To undertake installation works such as lighting and small power installations.
- To carryout fixed and portable appliance testing as required, throughout the building.
- To carryout fault findings on systems up to 415 V.
- Preparation of drawings and design data for quotations/Manufacturing drawings.
- Communicating directly with clients and sub contractors on electrical issues.
- Providing O&M instruction assistance for electrical and control aspects for inclusion in main O&M document.
- Attending meetings/ providing status reports to assist in project execution activities and workload planning.
- Supporting other departments at meeting with customer and job sites.
- Provides calculations relating to cable sizes and equipment rating/selections as required.
- Works with minimum supervision and has responsibility for checking manufacturing drawings and designs; prior to issue to customers/ subcontractors and internally within.
- Familiar with Health & Safety policy and is prepared to attend and participate in H&S induction courses at clients or customer premises.
- Performs other related duties as assigned or requested
Academic Qualifications
B. Tech in Electrical & Electronics Engineering - C C S University, Meerut.
V H S E - Under Vocational Higher Secondary Board
SSLC - From the Board of Public Examinations
Computer Proficiency
M S Office
Photo Shop
C, C++, MATLAB, MIPOWER
Auto CAD
I here by declare that the above mentioned details are true in my knowledge
Yours faithfully
Anikkuttan.K.R

[Unregistered]

NORIEL CASTILLO HERNANDEZ
Balete, Batangas City

POSITION APPLIED : PIPE FITTER / PIPE FABRICATOR

PERSONAL INFORMATION
Date of Birth : February 05, 1981
Place of Birth : Lobo, Batangas
Sex : Male
Age : 32 years old
Civil Status : Married
Citizenship : Filipino
Height : 5’7”
Weight : 120 lbs
Religion : Islam
Languages : English / Tagalog

Person to be contacted in case of Emergency :
Mrs. Racquel A. Hernandez (Wife)
Balete, Batangas City

EDUCATIONAL BACKGROUND :
Secondary : Batangas National High School
Rizal Ave., Batangas City
1994 – 1998

Elementary : Sta. Rita Elementary School
Sta. Rita, Batangas City
1988 – 1994

EMPLOYMENT RECORDS :
Company : AG&P COMPANY OF MANILA INC. (BECHTEL)
Address : San Roque, Bauan, Batangas, Philippines
Position : Pipe Fitter
Inclusive Dates : January 29, 2013 – present

Company : ANEL Electrical Projects Contracting and Trading Company
Address : Doha, Qatar
Position : Pipe Fabricator/ Pipe Fitter/ Copper Welder
Inclusive Date : July 20, 2011 – August 31, 2012

Duties and Responsibilities :
Install and fabricates piping system alter repair of various material including all kind of valves and fittings
Fit-ups, fabrication, erection and installation of different kinds of spools as per isometric or orthographic drawings
Understand plan and isometric drawing, preparation of jigs and fixture clamps and other needs for fabrication in held connection in accordance to drawing and specification
Checking and aligning pipe materials PVC plastic
All kinds of valves and fittings
Ability to install general ship services to termination points with or without the aid of pipe run drawing
Lay out shipboard piping system in accordance with plan specification and other technical instructions

Company : KNM OGPET (EAST COAST) SDN, BHD.
Address : Lot 1863, Kuantan Port, Jalan Pelabuhan 2 Mukim
Sunghai Karang, 26080 Kuantan, Parang, Malaysia
Tel. No. : (60 9) 583 8272 / 73
Fax : (60 9) 583 8349 & 583 8270
Email : kps AT knm-group.com
Position : Pipe Fitter
Inclusive Date : March 2009 – September 10, 2009

Duties and Responsibilities :
Install and fabricates piping system alter repair of various material including all kind of valves and fittings
Loading positioning and fit-up of random using crane, rollers in according with its corresponding line numbers. Materials class color coding on above ground process piping.
Responsible for the tool sand equipment using the site
Fit-ups, fabrication, erection and installation of different kinds of spools as per isometric or orthographic drawings
Lay out shipboard piping system in accordance with plan specification and other technical instructions
Understand plan and isometric drawing, preparation of jigs and fixture clamps and other needs for fabrication in held connection in accordance to drawing and specification

Company : BRUNEL OIL & GAS SERVICES W.L.L
Somi Impianti SRL
Address : P.O. Box 24936 Doha State of Qatar
Power & Desalination Plant Project
Position : Pipe Fitter
Inclusive Date : October 1, 2006 – September 1, 2007

Duties and Responsibilities :
Knowledge in fabrication and installation of on board marine piping system
Ability to install general ship services to termination points wit or without aid of pipe run drawing
Lay out shipboard piping system in accordance with plan specification and other technical instruction
Fit-ups fabrication, erection and installation of different kinds of spools as per isometric or orthographic drawings

Company : AG&P COMPANY OF MANILA INC.
Address : San Roque, Bauan, Batangas, Philippines
Position : Pipe Fitter
Inclusive Dates : April 06, 2006 – September 13, 2006

Duties and Responsibilities :
Install and fabricates piping system alter repair of various materials including all kinds of valves and fitting
Loading positioning and fit-up of random using crane, rollers in accordance with its corresponding line numbers. Materials class, color doing on above ground process piping
Checking and aligning pipe materials PVC plastic
Provide and support to the Senior Pipe Fitter in the line
Responsible for the tool stand equipment using in the site
Company : AAR Fabricator and Contractor
Address : Bagong Pook, Lipa City, Philippines
Position : Pipe Fitter
Inclusive Date : December 15, 2003 – December 18, 2005

Duties and Responsibilities :
All kinds of valves and fittings
Checking and aligning pipe material and PVC plastic
Provide and support to the Senior Pipe fitter in the line
Responsible for the tool stand equipment using in the site

Company : SIEMENS BUILDING TECHNOLOGIES INC.
Address : Philip Morris, FPIP
Sto. Tomas, Batangas, Philippines
Position : Pipe Fitter
Inclusive Date : August 22, 2002 – September 20, 2003

Duties and Responsibilities:
Knowledge in fabrication and installation of on board marine piping system
Ability to install general ship services to termination points with or without the aid of pipe run drawing
Lay out shipboard piping system in accordance with plan specification and other technical instruction

I HEREBY CERTIFY that the above information is true and correct to the best of my knowledge and belief.

NORIEL CASTILLO HERNANDEZ
Applicant’s Signature