www.singhal-group.com Singhal Institute of CADD Centre and Engineering Services Pvt Ltd Lucknow : CADD ENGINEER

[mskavi]

Singhal Institute of CADD Centre & Engineering Services (P) Ltd.
http://singhal-group.com

Keywords: Mechanical Engineer with Knowledge Auto CAD, Pro - E, CATIA, SolidWorks

Designation: CADD ENGINEER
Experience: 0 - 1 Years
Location: Lucknow
Compensation:
Rupees 80,000 - 90,000
Education: UG - B.Tech/B.E. - Mechanical
PG - Other
Industry Type: Education/ Teaching/Training
Functional Area: Teaching, Education
Posted Date: 12 Dec 2008

Job Description
Candidate has to take the classes on Auto CAD, SolidWorks & CATIA

Desired Candidate Profile
B.Tech / B.E. Mechanical and having prior knowledge of SolidWorks, Pro-E, CATIA & Auto CAD is preferred

Company Profile
SICCES PVT LTD is having the franchisee of CADD CENTRE TRAINING SERVICES, CADD CENTRE is a 19 years old company having 200+ training centre in abroad . In Lucknow this company has 2 centres

Executive Name: Tarang Singhal

Address:
Singhal Institute of CADD Centre & Engineering Services (P)
G-17 to G-20, Murli Bhawan,
10-A, Ashok Marg, Hazaratganj
Lucknow,Uttar Pradesh,INDIA 22601

Email Address: tarang@singhal-group.com,sakshi@singhal-group.com

Telephone: 91-0522-4043380

Reference ID:
CADD ENGG

[Guest-IJT]

Name : k.sivachandran
Email : k.sivachandran85 AT gmail.com
Designation / Skillset : piping engg
Having 3 years experience as CAD designer in Mechanical power piping and oil& gas field. Excellence skills in PDMS,PDS Modeling, Microstation and Auto CAD 2D & 3D drawings.

Resume :

Objective
Looking for a challenging position of the PDMS Piping Designer in the reputed Organization with a view to use my wide experience for the benefit of the organization.
Intend to build a career with a leading corporate of hi-tech environment where there will be opportunities to demonstrate my skills and knowledge in order to pursue a long-term relationship with the organization.
Experience Profile
Having 3 years experience as CAD designer in Mechanical power piping and oil& gas field. Excellence skills in PDMS,PDS Modeling, Microstation and Auto CAD 2D & 3D drawings.
Working as a cad designer in Mech Ci Cadd ENGINEERING PVT. LTD Chennai, Nov 2008 – till date
Undergone Graduate Apprenticeship Training in BHEL PIPING CENTRE,CHENNAI From August 2009 to 2010 August Placed on PDMS Trainee.
Technical Qualification
Bachelor of Mechanical Engineering, Annamalai University, 2008 with 62%
HSC in N.L.C Higher Secondary School under State board with 64%.
SSLC in N.L.C Higher Secondary School under State board with 60%.
Software Skills
1.PDMS,PDS
2.Caesar 11 5.20
3.MicroStation J,V8,-2D&3D
4.Auto-CAD.2008-2D&3D
5.MS-Office

KEY Competencies
PDMS
3D Pipeline routing & Equipment modeling using Design module.
Piping isometric using Spooler & Isodraft module.
GA / Layout Drawing using Auto draft module.
Backing sheet creation using Draft module.
Creation of Piping Catalogues & Specification using Paragon & Specon module.
Setting up a New Project & Creating the main ADMIN Elements.
1. Project Details :
Software : Microstation, PDS and Navisworks
Designation : CAD Designer
Responsibilities
Inputs Study
Effort Estimation
Scheduling
Understanding Client Requirements
AHU Unit modeled in MicroStation 3d Modeling then its assembled
ASU Unit and its Flat supports modeled in MicroStation3d Modeling then its assembled
Different type of Fan like Cooling supply fan and Exhaust fan are modeled in MicroStation 3d Modeling then its assembled
To Create Mezzanine Floor with Handrail modeled in MicroStation3d Modeling then its assembled
Different Type of Staircase modeled for Mezzanine Floor then its placed in Assembly as per dimension
Some complicated working area modeled some other software like Inventor, Pro-E etc, Then it has to be imported to MicroStation
Different Type of Ducting like Air duct, exhaust duct Above False Ceiling duct, Recycle ASH duct, These are modeled in MicroStation3d Modeling then
It’s assembled
Overall piping modeled in PDS like Compressed Air Piping, Water Supply Piping, Circulation Water Piping, Drain piping, Chilled Water Piping, Paint Reccover piping, Paint Feed Piping, Gas Piping, Filter Press Piping, etc
Interaction with Team Leaders
Interaction with the Clients
2. Project Details :
Title : paint shop
Client : PTK Architecture pvt ltd, Chennai. Modeling and Assembly of Automobile paint shop overall structural were done in Microstation and PDS. The main focus being on the complete parameterization of model. Interaction with clients to meet their standards and requirements. Checking drawings as per client pre requisite.
Software : Microstation, PDS and Navisworks
Designation : CAD Designer
Responsibilities
Inputs Study
Effort Estimation
Scheduling
Understanding Client Requirements
Grid, Floor, Ramp These are modeled in MicroStation3d Then placed
Different type of columns like RCC Columns, Steel Columns are modeled in MicroStation3d then placed as per dimensions
Different types of wall, doors and windows are modeled in MicroStation3d Then placed
False Ceiling, Mezzanine Floor, bridge connections, Stairs with handrails are created in modeled in MicroStation3d Modeling then its assembled
Truss, tie beam, lattices, cladding post, cladding runner, cladding sheets are modeled as per dimensions then placed in assembly
Overall pipe racks, cable tray, roof are modeled in Microstation3d modeling then these are placed as per dimensions
Interaction with Team Leaders
Interaction with the Clients
3. Project Details :
Title : As Built Drawing
Client : Ruchi Soya Industries pvt ltd, Chennai. Modeling and Assembly overall boiler unit were done in Microstation and PDS. The main focus being on the complete parameterization of model. Interaction with clients to meet their standards and requirements. Checking drawings as per client pre requisite.
Software : Microstation, PDS
Designation : CAD Designer
Responsibilities
Effort Estimation
Scheduling
Understanding Client Requirements
Interaction with Team Leaders
Interaction with the Clients
Dimensions are taken from plant itself then modeled in PDS and Microstation
Different type of equipments placed using equipment model as per dimensions
4 . Project Details :
Title : BONGAIGON THERMAL POWER PROJECT (3X250 MW)
Client : NATIONAL THERMAL POWER CORPORATION LIMITED.
Software Used : PDMS
Involved in 3D Pipeline routing using Design Module.
Generated detail drawing.
Created Piping Catalogue with Isometric drawing.
Done Piping stress analysis.
5 . Project Details :
Title : BINA THERMAL POWER STATION (2X250 MW)
Client : BINA POWER SUPPLY CO. LTD.
Software Used : PDMS
Involved in 3D Pipeline routing using Design Module.
Generated detail drawing.
Created Piping Catalogue with Isometric drawing.
Supported the overall day-to-day PDMS piping operations in BHEL, PC by maintaining the databases and resolving design issues among the users.
Area of Expertise
Designing & Modeling of Equipment & piping routing.
Well known understanding the Piping layout, Equipment layout, plot plan & GAD.
Support modeling as per Support Standard using PDS support modeler.
P&ID markups updating in model.
Preparation and checking of isometrics as per designer check list.
Interference Checking
Preparation of piping layouts using Drawing manager.
Proficient in Piping and Instrumentation Diagram & General Assembly Diagram..
Well knowledge in Isometric Diagrams.
Strong knowledge in 2D &3D Diagrams.
Familiar with international codes and standards like ASME, API etc.

Reference

Mr.C.Vaithianathan,
DGM/Engineering (PDMS-DEVELOPMENT)
Piping Centre / BHEL, Chennai-18.

-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4293411
Date & Time : 24th Jun 2011 5:41 AM (UTC)
IP Address : 122.174.47.235
Browser Info : Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.100 Safari/534.30
Predicted Country : India