ICS Moulds & Dies Pvt Ltd NOIDA : CAM Programmer, Unigraphics, VMC, NX4

[mskavi]

ICS Moulds & Dies Pvt. Ltd.
http://www.icsgroup.com.sg

Designation: CAM Programmer- Greater Noida
Experience: 4 - 9 Years
Location: GREATER NOIDA

Job Description
Looking for a CAM programmer who knows Unigraphics (UG) software, need to do programming for VMC.

Desired Candidate Profile
CAM, cam programming, Unigraphics, VMC, NX4, nx4, UG Software, Cam Programmer

Company Profile
A Singapore based company, manufacturing Moulds & Dies for the companies like TATA, MINDA UFI Filters etc.

Address:
ICS Moulds & Dies Pvt Ltd
Plot No. 19
Mahila Udyami Park-1
phase I
Greater Noida,U.P,INDIA 201301

Email Address: varun_ics@rediffmail.com

Keywords: CAM Programmer

[shivagangadhar]

CURRICULUM VITAE
M.shiva gangadhar
E-mail :m.shivagangadhar AT gmail.com
shiva_gangadhar AT yahoo.co.in.

OBJECTIVE :
Intend to take up a creative position in a result-oriented company , where my acquired skills will be utilized towards continued growth and advancement of the organization.

EDUCATION QUALIFICATION :
Qualification Institution University / board Year of passing Percentage of marks :
B.E (AUTOMOBILE ENGINEERING) Sriram Engineering College, Chennai Anna university DEC 2008 74%
Diploma in Mechanical Engineering Diviseema polytechinic college, avanigadda, Krishna Dt. A.P..State board of technical education and training , Andhra pradesh.Oct 200465.0%
Intermediate in automobile engineering & technician AKP Junior college, Chirala,
Prakasam Dt. A.P.Board of Intermediate Education, Andhra Pradesh.Mar 2002 86.4%
SSCRavindhra convent,Chirala,A.P..Board of secondary education , A.P..Mar 2000 57.7%

COMPUTER SKILLS :
SKILLS SET : UNI GRAPHICS NX-4 (specialization in modeling & drafting with Complete engineering concepts)
AUTO CAD

IN-PLANT TRAINING :
Undergone In-plant Training in Simpson , Chennai, an Assembly Line of Tractors. (15-11-07 to 24-11-07)
On Job Training in T.V.S.Motors, Chirala. Work done : Servicing of two wheelers

PROJECT :
1. INDUSTRIAL PROJECT DURING 7TH SEMESTER
INPLEMEMTATION OF ‘5SIGMA’ IN AUTOMOBILE INDUSTRY HINDUSTAN MOTORS , TIRUVALLUR, TAMIL NADUPERIOD : FROM 1ST FEB 2008 TO 15 MAR 2008

2. LAB PROJECT DURING 6TH SEMESTER :
RECONDITIONING OF TATA & ASHOK LEYLAND ENGINES FOR HEAVY VEHICLES.

INDUSTRIAL VISITS :
HINDUSTAN MOTORS , TIRUVALLUR.
SIMPSON , CHENNAI.

PERSONAL STATUS :
Date of birth : 02.02.1985
Marital status : Single
Nationality : Indian
Religion : Hindu

LANGUAGES KNOWN :
SPEAK : ENGLISH HINDI TELUGU TAMIL
READ : ENGLISH HINDI TELUGU
WRITE : ENGLISH HINDI TELUGU

DECLARATION :
I here by declare that all the information mentioned above is true to the best of my knowledge and belief.
Place :hyderabad
Date : (M.gangadhar)

[Guest]

CURRICULAM VITAE
VARUN SRIVASTAVA
Email : varun.srivastava.veenu AT gmail.com

Objective :
I would like to perceive my career in an esteemed organization, where I can implement my knowledge and intelligence to achieve the organization goals by the way of continues learning & development.

Educational Qualification :
- BE Mechanical from G H Raisoni College Of Engineering recognized by Nagpur University. 62.36% passed in 2011
- Higher Secondary Certificate (Science) from Cathedral College, Jhansi I.S.C Board. 57% Passed in 2005
- Secondary School Certificate (SSC) from Cathedral College, Jhansi I.C.S.E Board 67% Passed in 2003

Areas of interest :
Research and Development
Designing

Industrial Visits :
Mahindra& Mahindra, Nagpur
Shri Sastha Engineering Works,Nagpur
Industrial training : Shri Sastha Engineering Works,Nagpur

Key Skills :
- Good Planner & Smart Thinker
- Team Player
- Enthusiastic & Dedicated to Work
- Leadership

Achievements & Extracurricular :
Successfully Completed Unigraphics NX Professional course in
- Modeling
- Drafting
- Sheet Metal
- Assembly
- Machining

Participated in Student Events :
- Mud Race
- Boat Race
- CAD Designing competition
- Iron Man (Bench Press)

Projects:
- Design & fabrication of Pneumatic Jack
- Hand Operated Pipe Bending Machine

Languages Known:
- English
- Hindi

Hobbies :
- Watching discovery channel, National Geography
- Playing PC games
- Travelling
- Working out

[Guest]

CURRICULAM VITAE
Name : Gangadharaiah .K.R

CAREER SUMMARY :
Aiming to associate with a progressive organization that givesme scope to apply my technical skills and help develop my professional and personal growth.
Having 6 years of relevant experience in CNC MILLING

TECHNICAL QUALIFICATION :
I T I FITTER. From vishweswaraiah institute kunigal.

EMPLOYMENT AND PROFESSIONAL SUMMARY :
Worked as CNC OPERATOR –AT MOTHERSON SUMI SYSTEMS LTD.BANGALORE from july -2005 to jan- 2007
Currently working as a operator in 5 axies (dmu 80monoblock) and 3axies (h13 (FANUC 18imb ).dmu60. dmc63v) at ELECTRO PLAST PVT LTD(TOOLROOM) Bangalore from feb-2007 to till date

STRENGTHS :
Emphasis on CAD tools like worknc v19 and autocad
have sound verbal and written communication skills and ability to interact with individuals at all levels.
Ability to build strong working relation ships co – with workers.
A positive attitude and total belief in my capabilities.

SOFTWARE PROFICIENCY :
Operating systems windows xp 2000
Cad tools worknc v19
Autocad LT
Application tools ms office
Training undergone in NTTF
CNC PROGRAMMING IN FANUC CONTROL 80MBI

DECLARATION :
I hereby declare that all the above information is true to the best of my knowledge.
Date :
Place : Bangalore
yours Sincerely
(Gangadharaiah .K.R)

[Guest]

CURRICULUM VITAE
SHALIMAR VILLAGE
E-mail :rajeshkumarjha83 AT gmail.com

OBJECTIVE : A position in manufacturing industry, which would allow me to contribute to the success of an organization through the knowledge and experience that I have gained & also enhances my technical skills.

WORK EXPERIENCE :
1. Presently working as a CNC Milling PROGRAMMER MOTHARSON MOLD DIE CASATING LTD. Imt manesar gurgon 25th May. 2007 till.
Job responsibility :
- Team member of CNC Milling section
- Making manual programs in Fanuc & Haidenhain
- Follow-up of development schedule in CNC Section on actual vs planned

Activities.
- 5 years solid experience in Tooling Industry.
- Excellent ,managerial and leadership skills.
- Development of, Jigs& Fixture, Gauges.
- Effective communication skills
- Strong organizational skills.
- Deep ability to define problems, collect data, establish facts and draw valid conclusions
- Strong integrity and honesty
- Process planning of manufacturing operations.
- Operating measuring instruments like profile projector, height measuring station etc.

Company profile :
1. Motherson Tooling Limited (ISO/TS) is a subsidiary of Motherson Sumi Systems Limited. MTL specializes in manufacturing injection molding tools for automotive parts. MTL Supplying moulds for Mercedes Benz, BMW, Ford, Audi, Toyota, Siemens VDO, TRW, ZF, etc….MTL having well commercial tool room with high efficiency CNC Milling (Hermle), EDM (charmillies),WireEDM( charmillies).& all conventional machines. MTL having well equipped injection molding shop with 35 injection molding machines (25 to 400 tons) Batten field, Demag, Aurburg.etc…. 2. Worked as a CNC milling operator in ASIS MOLDS India pvt ltd, Greater Noida, UP India, from 12th DEC-2005 to 10th May-2007.

PROFESSIONAL SKILLS :
1. Manual programming of Fanuc, Haidenhain & Fager.
2. Operation of VMC (Fanuc, Haidenhain, Fager, Siemens)`
3. Selection of cutters and knowledge of cutting parameters.
4. Operation of conventional machines like lathe, milling, surface grinding,
5. Knowledge of process planning
6. Knowledge of power mill9.0

COMPUTER PROFICIENCY :
Autocad-2006 (2D & 3D drafting, modeling)
OPERATING SYSTEM : Windows 2000, Windows XP

TECHNICAL QUALIFICATION :
1. NATIONAL TRADE CERTIFICATE IN TURNER TRADE Govt. of India LHNG. Industrial Training Institute. Nerela, New Delhi, India Aug2002 to July 2004…..With 71%
2. ADVANCED TECHNICIAN COURSE IN TOOL ROOE MACHINE OPERATOR Govt. of India Tool Room Training Center.Wazirpur Industrial Area New Delhi Sep2004 to Oct 2005….with 72%

EDUCATIONAL QUALIFICATION :
HIGHER SECONDARY CBSE, Vidyagyan Mandir, SR SEC, Pahari Dhiraj, Delhi --- 2000 to 2002.
S.S.C CBSE, Sarvodaya boys senior secondary School, B block Shalimar bag New Delhi---2000.
B.A (PASS) Delhi University (2000-2005)

[Unregistered]

Nidhi Singh
E-MAIL.ID :nidhisingh601 AT gmail.com

Objective : To contribute my professional skills to a progressive organization for achieving a successful career

Education Qualification :
DEGREE INSTITUTE UNIVERSITY/BOARD YEAR OF PASSING :
M.B.A. D.S.I.T.M., Ghd. M.T.U Pursuing
B.Sc A.K.P.G. College, Varanasi. Vidhya Peeth University 2012
Senior Secondary - 12th S.S.Public School, Varanasi. C.B.S.E. Board 2009
High School S.S.Public School, Varanasi C.B.S.E. Board 2007

Academic Projects Undertaken :
1. Comparative Market Analysis of Cadbury v/s Nestle.
2. Detailed survey of the marketing strategy & marketing in a transient market.

Extracurricular activities :
- Monitoring the Student query with management.
- Acting as a bridge between student and teachers

Hobbies :
Listening to music, watching inspirational movies

Strength :
- Positive thinker,
- Self motivated
- Quick Learner,
- Hard working

Personal Details :
Father : Mr. Virendra Pratap Singh
Mother : Mrs. Arti Singh
DOB : 18-Sep-1992

DECLARATION :
I hereby declare that all the statements made in this application are true, complete and correct to the best of my knowledge and belief.
Nidhi Singh.

[Unregistered]

CURRICULUM VITAE
ANAND KUMAR
E- mail : anandkmr733 AT gmail.com

CAREER OBJECTIVE :
Seeking a position to utilize my skills and abilities in the technical industry that offers professional growth while being resourceful, innovative and flexible.

TECHNICAL QUALIFICATION :
DIPLOMA IN MECHANICAL ENGINEER BHAGWAN PARSHURAM POLYTECNIC, KURUKSHETRA (Under STATE BOARD OF TECHNICAL EDUCATION, HARYANA) 1STCLASS (68.08%) 3 YEARS, (AUG 2008 – JULY 2011)
Two month Training from Research & Development Centre for Bicycle & Sewing Machine (UDNP/UNIDO Assisted PB. Govt. Project) Ludhiana.

ACADAMIC QUALIFICATION :
Intermediate : Haryana Board of School Education ( Commerce ) with 58.9% aggregate
Matriculation : Haryana Board of School Education with 61.4% aggregate

SOFTWERE KNOWLEDGE :
Solid Modeling,Assembly, Drafting,Detailing. :UGS- NX6 (1 Year experience)
Solid Modeling,Assembly, Drafting,Detailing. : UGS SOLID EDGE V-19 (CURRENT & 2 year experience)
Drafting and Detailing : AUTO CAD 2006, AUTO CAD MECHANICAL

WORK EXPERIENCE :
CURRENT COMPANY :
PROMPT TOOLS SEC-10, NOIDA : SEP 2011 TO TILL DATE.
Description :
M/S PROMPT TOOLS- Manufacturing of Plastic Moulds , Press Tools , Jig & Fixture Machinery Parts
Served as – Astt.Design Engg.

SIGNIFICANT CONTRIBUTIONS :
** Experience in product design & development.
** Design for manufacturability (DFM)
** Knowledge of GD&T
** In Development of Model & Modification resposibility was feasibility study of components,
** Jigs & Fixtures Design & helping manufacturing peoples in the development

JOB PROFILE :
** Data Collection.
** Jig & Fixture design.
** Electrode extraction.
** Product design.
** Feasibility study of Component.
** Complete Project Monitoring for MINDA Jig & Fixture Cad to Inspection.

RESPONSIBILITY :
** Cross verification of 3-D model dimension according to customer data.
** Prepare Master list of all drawing and external source document received from Customer or prepared in house.
** Extract core & cavity generate total 3-D model.
** Produce all 2-D drawings in SOLID EDGE V-19 for Tool Room.
** Preparation of 3-D model & drawings of all Gauges, Jigs, Fixtures and Tools SOLID EDGE V-19
** Co-ordinate with Tool Room for preparation of New Dies, Jigs/Fixture, gauges required for the new component.

CLIENTS : SUBROS, MINDA PRECISION TECHNOLOGY,
JBJ TECHNOLOGY LTD AXESS ULTRASONIC PVT LTD. etc.

PERSONAL INFORMATION :
Father‘s Name : Shri RAM MILAN
Date Of Birth : 23th AUGUST1990.
Marital Status : Unmarried.
Sex : Male.
Language proficiency : English,Hindi
Nationality : Indian.

DATE :
PLACE :
(ANAND KUMAR).

[Unregistered]

M.KAMARAJ
E-mail :kamaraj232 AT gmail.com

CAREER OBJECTIVES :
A spring to work as professional in your esteemed organization by promising to work up to the maximum level of satisfaction of higher authorities by discharging my duties to up lift the reputation of the concern.

EDUCATIONAL QUALIFICATIONS :
DIPLAMO, (Mechanical Engineering). Central Polytechnic College. Chennai. (1999-2002)
Aggregate : 87 %( First class with honors)
HSC (State Board). Govt. HSS. Ananthapuram.
Aggregate : 75% (1998-99)
SSLC (State Board). Lourdu Annai High School. Kanakkanuppam, Gingee.
Aggregate : 85.2% (1996-97)

SOFT SKILLS :
- AUTO CADD
- UG NX-5(CAD/CAM)
- DELCAM (Power mill)

EXPERIENCE DETAILS :
Guindy Machine Tools Ltd, Chennai. (From 9-8-2002 to 17-6-2008)
Manufacturing all type of lathe chucks, Lapping M/c parts, and CMM M/c parts as company forms.
Designation : Junior Engineer – VMC programming & setting
My role :
1. As per drawing, 2d manual Programming for all type of Chucks and parts (Base jaw, hard jaw, cover, body, turret, T.nut)-(2002 to 2004).
2. Programming for Hydraulic Rotary Indexing table (HRIT).
3. UG NX-5 using for modeling and CAM Programming. (2004 to 2008).
4. Knowledge of Conventional and Non-conventional M/cs.

Shard low India Ltd, Chennai. (From 23-6-2008 to till date)
Forging and stampers - crank shaft, cam shaft, axle shaft And new development jobs as per customer.
CUSTOMERS
Ashok Leyland, Telco, BEML, HVF, IP, Simpson, Tafe, KOEL, GM.
Designation : Asst. Engr. – Die shop (CAD & CAM-VMC)
My role :
1. Modeling using UG NX. (Ug Nx3 -Ug Nx8)
2. NC code generating for V.M.C.
3. Simulation checking-Cimco Edit.
4. Cutting Tool Selection, Setting & manual Programming.
5. Planning, Monitoring and control of the cutting tools.
6. Reducing tools cost saving and improving the tool life.
7. Responsible for Planning and carrying out the periodic, preventive,
And breakdown maintenance.
8. Tool and Die making, Die repair and Die maintenance. 9. TS-16949 documentation maintains.
10. Attending CFT meeting & continual improvement of quality and productivity.
11. New product development. Knowledge of Computers & ERP systems.
12. Shop floor supervising and man power handling.
13. Shop floor 5S maintain.
14. Knowledge in CNC-Turning.

Machine Handling :
3Axis - Hard Ford35, Hard Ford70, BFW1, BFW2, Okuma HMC & VMC,
Makino S33, Makino V77. 5Axis - Charles 1160 Feeler with FANUC control system. Instrument used
Vernier caliper, Bore dial gauge, Air plug gauge, inside and outside Micrometer, Fine boring bar, Templates.

PERSONAL DETAILS :
Date of birth : 22 APR 1981
Father’s Name : Mr. C.Mannangatti
Gender : Male
Nationality :Hindu, Vannier
Marital Status : Married
Languages Known : Tamil and English

DECLARATION :
I hereby confirm that all the information give above is correct is the best of my knowledge.
DATE : yours faithfully
PLACE : (M.KAMARAJ)