www.sms-siemag.com SMS Demag Pvt Ltd Gurgaon : Instrumentation Engineer

[mskavi]

Name of the company : SMS Demag Pvt Ltd sms-siemag.com
Location of the company : Gurgaon
Designation : Instrumentation Engineer

Job Specification :
Must be computer literate and excellent in verbal and written communication.
Excellence in IS ,IEC,DIN,VDE codes & Specification.
Interpersonal skills.
Communication & networking skills.
Having knowledge of Field Instrumentation, Analyzers and their selection criteria.
Understanding of P&I DIagram, Loop Diagrams, Instrument List, Mechnaical Piping Drawings
Proficiency in Autocad will be an advantage.

Website : http://www.sms-siemag.com

How to Apply : Send your resume to hrd AT in.sms-siemag.com

Address of the company :
SMS Demag Pvt Ltd
387 Udyog Vihar
GURGAON,Haryana,India 121104

About the company :
SMS Siemag AG belongs to SMS Holding GmbH. This is the holding for a group of companies internationally active in plant construction and mechanical engineering relating to the processing of steel and nonferrous metals. In 2009 some 9,000 employees worldwide generated a turnover of EUR 3.9 billion.SMS Siemag supports the Pro-Original Campaign, a joint initiative of the VDMA (German Engineering Federation) and its members.

General Instructions :
1) This is a job / career / vacancy / recruitment posting from SMS Demag Pvt Ltd at Gurgaon for post of Instrumentation Engineer.
2) For more details refer company website of SMS Demag Pvt Ltd.
3) You can send your resume / CV to the careers e-mail id of the company (SMS Demag Pvt Ltd).
4) Source of this info is the company website / internet on the date of publishing.

[Guest-IJT]

Name : himanshu kumar dhara
Email : hinstrumentation AT gmail.com
Designation / Skillset : instrumentation engineer

Respected
Sir/madam
I have completed B.Tech degree in Electronics &Instrumentation with 66% in 2010. I have over Three months of experience in industrial automation from ( IITP AUTOMATION).
I have 5 monthes working experience in GOOD YEAR INDIA LID.FARIDABAD as post of GET. under ( E&I Maintenance Department).
** Handling a team of 5 I.T.I members including Apprentice .
** Weighing Scale Calibration.
** TS Training (Technical Specification) EHS(Environment, Health & Safety).
I am looking for a good platform where I can work with full devotion & enthusiasm. I wish to stand with a solid backbone to make feel proud of my employer with my hard work and loyalty. Moreover I am ready to work anywhere and money though important is not my main concern.
I would be grateful if you could consider my candidature for GET and provide me an opportunity to prove my worth. I am enclosing my resume for your kind consideration and favourable reply .
Thanks & Regards
Himanshu kumar Dhara

Resume :

CAREER OBJECTIVE :
Willing to work in an innovative and creative environment with committed and dedicated people so as to explore my talent and realize my potential and use every opportunity to prove myself as a key player in this competitive world.

. TECHNICAL EXPERIENCE :
** 3 Months experience as GET in automation field (from IITP Automation Noida ).
** Ability to program and communicate on Allen-Bradley, Modicon, Mitsubishi, Siemens. Knowledge of PLC Programming, Wiring.
** RTD, Thermocouples, Level Detectors, Flow meters, Temperature controllers, Capacitive & Inductive proximity switches, Control valves.

JOB PROFILE :
Five months experience in GOODYEAR INDIA LIMITED BALLABHGARH as Maintenance AND Calibration Engineer, pay roll of BELZ INSTRUMENTS PRIVATE LIMITED FARIDABAD, Handling a team of 5 I.T.I members including Apprentice.
** Weighing Scale Calibration.
** TS Training (Technical Specification) EHS (Environment, Health & Safety)
** Maintaining of preventive jobs on daily basis like steam and air leakages etc.
COMMISSIONING, REPAIRING, MAINTENANCE :-
** Selection of process control instrumentation system & instruments like non return valves, Diaphram valves, Control valves, Piston valves, shaping controllers, Pneumatic Actuators, Cylinders etc.

TEAM BUILDING :-
** Worked on involvement and accountability of specific area, by making healthy competition among them. This exercise resulted in improved uptime productivity and housekeeping.
EDUCATIONAL QUALIFICATION :
** B-Tech in Electronics & Instrumentation Engineer from Balasore college of Engineering & Technology, under university BPUT Odisha, having percentage 66% in 2010.
** Done my Intermediate in R.I.H.S(Rural Institute of Higher Studies) Bhograi (odisha) with 47.7% in 2006.
** Done my 10th in SM High school Balharpur Bhograi (Odisha), with 66.7% in 2004.

PROFESSIONAL EXPOSURE :-
** Seminar on OPTICAL COUPLER.
** Major Project on MOBILE BASED INDUSTRIAL CONTROL
PROJECT DESCRIPTION :
Mobile based appliance control is a latest technology by this technology we can control that means ON and OFF appliance ,device or machine in the industries by the help of the mobile so it is very convenient process .
PERSONAL SKILLS :
** Co-operative
** Self-motivator and ability to work hard, if required.
** Creative and friendly.

DECLARATION :
I hereby declared that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.

Date :
Place : Signature

[Unregistered]

CURRICULUM VITAE
SANJAY SHARMA
Haryana
E-mail : Sanju_sharma06 AT yahoo.co.in
Sanjuaryan08 AT gmail.com

Career Objective :
To take all the assignments as a challenge in order to uplift and maintain the goodwill, dignity, and Growth Of the concern, providing me knowledge, experience and growth of my career.

PROJECTS TEAM ASSISTS BY :
Furnace, Phoenix Steel mills ltd.*South Africa* (RCPL)
Material handling Projects, Tuff System,(MPPL)
Power Plant & Material handling Projects (TSL)
Port Engineering projects. (Howe India)
Power Plant & Material handling Projects (EEPL)

Working Experience (More than 11 Yrs.)

1.ENERGO ENGINEERING PROJECTS LTD. (August 2011 to onward)
Okhla Ind. Area, Ph-II New Delhi 110020(Aug.2011 to onward)
(Leading manufacturer of material handling & Conveying Equipment)

COMPANY PROFILE : Energo engineering projects limited is a Dealsinepc contracting of ASH/COAL/BOP/BTG PACKAGES for thermal power plants and ESCO energy services for RLA studies, energy AUDITS and P.G. TESTING manufacturing and fabrication of engineering equipments for power and process industries.
JOB PROFILE : Worked as Senior Designer Engineering (Mechanical Dep’t.)
Making Layout & G.A Drawing of conveyors as per customer’s requirement along with Equipments Assy.
Belt conveyors and accessories like gates, diverters, trippers, chutes, hoppers & storage bin etc. Detailing of fabrication drawing of supporting structures, stringer, Head and Tail Ends, skirt board, deck plates, discharge chutes and inter connecting chutes, scrapers, flap gates, rack and pinion gates

2. HOWE INDIA ** New Delhi 110019 ( from July 2008 to August 2011)
(Canadian based MNC Consulting Engineering Company), International Engineering Consultancy 43yrs
in India. A group of ADANI POWER .

COMPANY PROFILE : Howe India Pvt. Ltd, is a Consulting Engineering and Project Management organisation in the field of design engineering of ports and harbours with all mechanical electrical facilities. It is internationally well known organisation for its excellence in design of ports and there are a number of efficiently operating ports both national and international. During the last five years it grew more by more than 150%. The successful commissioning of JSW Greenfield port is latest laurel added to its fold. There are currently there are seven projects under execution at varying degrees of completion.
JOB PROFILE : Working as CAD Designer (Mechanical), Material handling division. Prepared Layout drawing, Flow diagram, Profiles and G.A of conveyors, G.A of equipment arrangement (Stacker Reclaimer Ship loader and Unloader (Garb) etc. Transfer Tower, Discharge Chutes, conveyor equipments, Ducting system, Piping drawings, Silo drawings and detailing of belt conveyor parts etc

PRESENT MAJOR PROJECTS :
Krishnapatanam Port (A.P), Ennoor Port (Chennai), JSW Port (Karnataka)
Adani (Mudra) Port (Gujarat) Mormugao Port (Goa) Etc.

3. TECPRO SYSTEMS LTD ** Sector 15 Part II, Gurgaon (from March.2006 to March.2008)
(Leading manufacturer of material handling & Conveying Equipment)

Company Profile : One of the world’s fastest growing EPC companies in material handling industry, having an average growth rate of more then 100%.Customer list comprising who-is-who of Indian companies, over 20% of revenues from international markets, having offices in Chennai, Delhi, Kolkata, Mumbai, Ahemdabad & Hyderabad, overseas office in Dubai and South Africa. “Sate-of** the** art” factories in New Delhi & Bawal. Committed to exploring new frontiers of growth and excellence through customer satisfaction
JOB PROFILE : Worked as Senior Design Engineer (Design Deptt.), Making Layout & G.A Drawing of conveyors as per customer’s requirement along with Equipments Assy.
Belt conveyors and accessories like gates, diverters, trippers, chutes, hoppers & storage bin etc. Detailing of fabrication drawing of supporting structures, stringer, Head and Tail Ends, skirt board, duck plates, discharge chutes and inter connecting chutes, scrapers, flap gates, rack and pinion gates

4. MASYC PROJECT PVT. LTD. -New Delhi 110064 (from Nov.2004 to Jan.2006).
(Turnkey of material handling system. Belt conveyors, bucket elevators etc.)
Worked as CAD Draughtsman :
Belt conveyer and accessories like gates, diverters, trippers, chutes, hoppers & storage bin etc. Detailing of fabrication drawing of supporting structures, stringer, Head and Tail Ends, skirt board, duck plates, discharge chutes and inter connecting chutes, scrapers, flap gates, rack and pinion gates

5. ROSY CRANES PVT. LTD.** New Delhi 110040 (from Jan.2002 to Oct.2004)
(A unit making of Detail Drawing with BOM and packing list & Manufactures of all type of lifting,Equipments, E.O.T cranes, H.O.T cranes Goliath cranes, Jib cranes Electric Hoist & Lift etc.
Worked as Mechanical Draughtsman (CAD) & Supervision work, Job handled by G.A and detailing of parts drawing for shop manufacturing.

Educational Qualification :
** High School from C.B.S.E Board, Delhi (1996-97) with first division.
** 10+2 from Haryana state board of examination Haryana.(1998-99)
** I.T.I (Draughtsman Mechanical) RTK.(HR.) 2001
** Diploma in Mechanical Pursuing
** AutoCAD training, Cad Research and training institute, (1998-2000)
** AutoCAD training, A Hub of Design crafts & training institute, (2000-Jan2002

Computer Proficiency :
** Good working knowledge of AutoCAD 2002, 2004, 2008, 2009, 2010,Auto cad mechanical 2012, & MDT.
** Good working knowledge of Microsoft word /excel.

Key Skills :
** Zeal to accept new challenges & Responsibilities.
** Initiative, Energetic, Self-driven
** Easily adjustable in a team environment.
** Gregarious and make rapport quickly.
** Patient & Good listener

Work Profile :
** Project Conceptualization and Design Development.
** Independently handling of project from Concept to Handing over of work.
** Submission & Completion Drawing.
** Working Drawings and Detail Drawing.
** Submission & Completion Drawing.

Personal Details :
Name : SANJAY SHARMA
Date of birth : 04th Aug, 1980
Gender : Male
Religion : Hindu
Marital Status : Married
Nationality : Indian
Category : General
Language Known : Hindi, English

GENERAL :
Confident in doing job to perfection under all circumstances.

PACKAGE :
Present Package 6.50000 Lacks p.a.
Package Expected Negotiable

DECLARATION :
I here by declare that all above statements in my Curriculum vitae are true, complete & correct to best of my knowledge and belief. Original Certificates are provided when and where asked.

DATE :
PLACE : GURGAON
(SANJAYSHARMA)

[Unregistered]

PROFILE :
** Looking for a job wherein I can contribute value addition to the company and wherein I can enhance my organizational, interpersonal and management skills.
** Thorough understanding of Auto CAD
** Good Communication and Technical skills.
** Ability to work in stress conditions and flexibility in finishing assignments.
** Curious for creative & Innovative work and positive attitude in achieving Targets.

CAREER CONTOUR :
1 : FRIGATE TEKNOLOGIES P.V.T. LTD. Since August 2009

Project Details :
Designation : Design Engineer
Nature of Work : To Handle team of engg. & checking and preparing drawings (conv. Elevator G.A. Drawing), and Silo, AirSlide fabrication drawing.
Office : Faridabad (Haryana)
Significant highlight : GUJRAT SIDHEE CEMENT. Installation and Erection of conveyor in Designed With fabrication dwg.
IGI airport, New Delhi
G.M.R. Docking system Hyderabad in canopy dwg.
A.P.M. FERTILIZER GUJRAT
Feed Conveyor 450 Mt. Long. & Wagon Loading System all Complete G.A. With Fabrication dwg.
MAHARAJA CEMENT GUJRAT
Chain Elevator & Belt elevator G.A & FEB. Dwg.

CONWAY SYSTEM PVT. LTD. JULY.2008 – Aug. 2009
Project Details :
Designation : Design Engineer
Nature of Work : Manage the team of engineers & draftsman & helping and preparing drawings.
Office : Delhi.
Tools used : Auto CAD 2006,2009,2010,2012,2013LT
Significant highlight : Installation and Elevator of in PAWAN CEMENT.GUJRAT
TOTAL EXPERIENCE : 4.9 YEARS
KEY DELIVERABLES :
Comparative Statement : Using comparative system of different equipment as per offer received for discussion & suggestion the best one.
Tensile stricture : 2D drawing of tensile steel structures and detailed drawings.

Educational Credentials :
Professional Qualification :
ITI (MECHNICAL) with 84%
Pursuing Diploma (Mechanical) From- IME, Year : 2012
Diploma in Auto CAD
Good knowledge of 2D
SALUJA CADD CENTRE, GURGOUN

Academic Qualification :
Passed 12th from U.P. Board (2006) with 55%
Passed 10th from U.P. Board (2004) with 52%

COMPUTER LITERACY :
** Auto CAD 2D
** Knowledge of Microsoft Excel, Word, PowerPoint

PERSONAL DOSSIER :
Name : Amit Kumar
Address : 191/5, Pul-Prahladpur,Badarpur, New Delhi-110062
Date of Birth : 8th Aug. (1987)
Marital Status : Married
Email : amit.design2011 AT gmail.com

[Unregistered]

RESUME
Hardik H .Vanzara
Bachelor of Engineering (Instrumentation & Control Engineering)
E-mail : hardikengg AT yahoo.com

CAREER OBJECTIVE :
I wish to accomplish work that is intellectually challenging and be a part of the company in achieving its goals and objectives. I look forward to work to your esteemed organization. Given an opportunity, I will never let it slip by. Getting excellence through experience.

INDUSTRIAL EXPOSURE :
Organization Period Current / Last Designation
Doshion Veolia Water Solution –HPWD(PHARMA,F&B) Division
Kathwada, Ahmadabad. JAN-2011 to onward Engineer-Production& maintenance

D K Scientific Industries, Vatva, Ahmadabad
JULY 2009DEC 2010)
Project engineer.

Educational Qualifications :
CLASS,
(Std,Year,Sem), UNI Or BOARD, Year of Passing, Grade
S.S.C (10th ) G.S.E.B Mar-2002 DISTINCTION
H.S.C(12th)(Sci.) G.H.E.B APR-2004 SECOND CLASS
B.E.(IC) GUJARAT UNIVERSITY Jun-2009 SECOND CLASS

Professional experience :
1. COMPANY NAME : DOSHION VEOLIA WATER SOLUTION. (AHMADABAD)
Company :Doshion Veolia Water Solution (HPWD (Pharma and food & beverages) & IOD) division)
Designation : Engineer – Production& maintenance
Duration :1st JAN 2011 to Onwards
Reporting to : Deputy Production Manager & ASST. M.D
Company Profile :
Doshion Veolia Water Solutions Pvt. Ltd, (Unit : Kathwada, Ahmadabad)
Doshion Veolia Water Solutions aims at executing small, medium & large size EPC Projects for Water & Waste Water Management facilities in Municipal, Infrastructural and Industrial projects (Pharmaceuticals, Food & Beverages). Doshion Veolia Water Solutions is a joint venture between DOSHION LIMITED & VEOLIA WATER SOLUTIONS & TECHNOLOGY France that executes small, medium and large projects for water and waste water management facilities in industrial, municipal and infrastructure segment. With more than 200 technologies and access to over 2500 patents DVWS has a solution just to serve your need. (www.doshionveolia.com)

Roles and Responsibilities :
Responsible for Production Planning & Scheduling and Manufacturing process.
My responsibility as a Production Engineer is to plan daily E&I activities and monitoring the production activity like electrical wiring & instrumentation assembly works on systems as per drawings & documents with work distribution to the workmen as per their skill and abilities
Responsible of WTP,ETP & STP Plants & Processes(Water Treatment Plants & Processes)
Better Craftsmen’s handling, proper guidance & instructions to them
General electrical/mechanical maintenance, with maintain maintenance records as per ISO document like preventive; breakdown and annual maintenance contract with attend internal & external audits.
Testing and Quality check of the instrument
To ensure and monitor production department working as per given plan.
Daily Production work to plan & preparation for the craftsmen as per material availability & job priority.
Co ordination & mail communication of interaction movement for the systems and follow up with project engineer for material arrangement and material issue from store through ERP system.
Weekly interaction meeting with project, manufacturing & engineering for plan and feedbacks related of the systems with materials & engineering rework issues..
Documents submitted as NCRs, MIS, DAR, and production check list with stage inspection report.
Production manual updating like rework data sheet, master root card (MRC), material records, QC reports with NCRs, production check list with stage inspection reports.
Consumable materials maintaining as per production requirement with indenting through ERP.
System FAT (Factory Allowance Test) arrangement as per drawings & documents. Panel & system testing with solving the problem during on going to works and system operational support as per requirement.
Carry out root cause analysis at workshop rework, NCRs & costumer complains.
E&I materials trouble shooting, service, repairing, testing & calibration and co ordination with the vendor for the same.
Co-ordination with other departments.
Responsible for completion of Projects as per Dispatch dates

2. D. K Scientific Industries, Vatva, Ahmadabad :
Company :D.K Scientific industries
Designation : Engineer – Project
Duration :july-2009 –dec 2010
Reporting to : Deputy Project Manager
Company Profile :

D.K Scientific industries : is a fastest growing Project base Company located at vatva Ahmadabad. It is manufacturing scientific instrument it is used in I.T.I, diploma, Degree College for practical purpose. such as flow controller, pressure controller, level controller, Temperature controller etc .
Roles and Responsibilities :-
Effective implementation of Design practices in order to meet the customer needs.
Testing and Quality check of the equipment.
Responsible for technical Documentation.
Responsible from raw material to dispatch the plants.
Responsible for completion of Projects as per Dispatch dates.
Production and demonstration of equipment.

Computer Proficiency :
Operating system : Windows 98, Windows XP, Dos.window vista, window 7.
Software : Ms Office, Adobe Photoshop, Corel Draw etc.
Programming languages : C, Assembly languages (8085,8051),PLC Programming,

Projects &CoCurricular Activities :
I have made a power supply projects (+5v,-5v) in a first year.
I have made a smoke detector in a 4th SEM.
I have made a ph meter project in a 6th SEM.
I have made a project in a 8th sem on a level control trainer.
I have participated in a national level debate competition.
I have also participated in a chess competition.

Personal details :
Date of Birth : 6th September 1986
Father’s Name : Harshadbhai G. Vanzara
Gender : Male
Marital Status : Single
Language Proficiency : English, Hindi, Gujarati
Hobbies : Reading, Playing Cricket, Listening to Music.
Abilities : Practical, Hard working, Responsible, Innovative & creative

Declaration :
I hereby declare that the above mentioned information is true to the best of my knowledge.

With Thanks,
Hardik vanzara.