www.manjushreeindia.com Manjushree Extrusions Ltd Bangalore : QUALITY INSPECTOR, SUPERVISOR

[mskavi]

Manjushree Extrusions Limited
http://www.manjushreeindia.com

Keywords: QUALITY INSPECTOR / QUALITY SUPERVISOR

Designation: QUALITY INSPECTOR / QUALITY SUPERVISOR.
Experience: 2 - 4 Years
Location: Bengaluru/Bangalore
Compensation:
Rupees 1,00,000 - 2,00,000
Transportation from City is provided. FREE accommodation close to the factory will be provided, should the candidate desire to live close by. Subsidised canteen
Education: UG - B.Sc - Chemistry, Food Technology,Diploma
PG - Post Graduation Not Required
Industry Type: Printing/Packaging
Functional Area: Production, Maintenance, Quality
Posted Date: 29 Dec 2008

Job Description
Online QC check, trial analysis report, supplier rating, ISO/TS compliance, quality audits. Monitoring plant & supplier quality. Customer complaint management

Desired Candidate Profile
Preferably B Sc (or) CIPET candidate with thorough knowledge on QC needed. Familiar with Quality audits and customer complaint management. Familiar with basic testing instruments and analysis. We will consider PUC pass candidates with QC knowledge.

Company Profile
Manjushree Extrusions Limited is the largest mfrs. of rigid plastic packaging, with a Turn over of 85 crores and making 150 million containers per annum. Clients include all FMCG's brands like Unilever, Nestle, P&G, GSK, Coca-Cola, PepsiCo etc.

Executive Name: N.RAMESH

Address:
Manjushree Extrusions Limited
60E, Bommasandra Industrial Area
Hosur Road
Bangalore,Karnataka,INDIA 560099

Email Address: hr@manjushreeindia.com

Telephone: 91-080-27836354

Reference ID:
QUALITY INSPECTOR / QUALITY SUPERVISOR

[Guest-IJT]

J . Antony Wilson
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
antonywilson007 AT gmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
Quality Control Inspector
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
Antony Wilson. J
Email
antonywilson007 AT gmail.com
CURRICULAM VITAE
Career Objective

To work in a challenging environment and aiming towards professional development and growth of the esteemed organization.
Professional Present Experience
SITE : INDIANA GRATINGS (PVT) LTD, JEJURI
PUNE - 412303
Tenure : MARCH 2011 – Till date.
Designation : Quality Control Inspector
COMPANY DETAILS : 1. Structural s For Geodesic, BHEL, Thermax.
2. Gratings For Domestic And Exports
3. Conveyors For Domestic And Exports
Professional Second Experience
SITE : INDIAN SPACE RESEARCH ORGANISATION (ISRO)
MAHENDRAGIRI - 627117
Tenure : JULY 2010 – FEBRUARY 2011.
Designation : Inspection Engineer for Quality Control
WORK DETAILS : Pipe Line Fabrication and Cylinder Erection
Professional First Experience
Company : VASAN ENGINEERING INDUSTRIES (P) LTD.
Mathur, TRICHY - 629102
Tenure : MAY 2009 – JUNE 2010.
Designation :Inspection Engineer ( Quality Control & Cutting Plan)
COMPANY DETAILS : 1. M/S BHEL , M/S SUZLON energy ltd , PUNE
Nature Of Work
1. As per Quality Manual , Quality System Procedures and Quality Documents
2. And also as per Customer Quality Requirement , Plans
2. Production plan Approval
3. Production process controls and activities
4. Quality Control Activities
5. Selection , Preparation and Painting Procedures
6. Selection of appropriate NDT methods
7. Self Inspection of Boiler Components (BHEL)
8. Worker Management and Good Relation
Perfomance
1. Good relation to low level and top level of management
2. Feedback to improve Production, Quality in economic scope
3. Co-ordinate to Third Party Inspection / Customer Inspection
Establishment
1. Welding Procedures (WPS)
2. Procedure Qualification Records (PQR)
3. Welder/Welding Operator Performance (WPQ)
4. Quality / Production Reports etc
Professional Training.
- AutoCAD.
Software Skill
- Packages : MS Word, MS Excel.
- Operating system : Windows 9x/NT/2k/XP

Products
1. Boiler Components
2. Fabrication Components of Non Pressure Parts up to 500 MW
3. Structural of Main Column, Bracing, Structural members etc.
4. Fluid Path of Ducts, Hoppers Bellows etc.,

5. Wind Mill Tower
6. T.T Burner Assay
7. Wind Box
In plant Training
- Under gone implant training in : Sakthi Lathe Works. Nazareth
- Duration : 15 Days.
- Under gone implant training in : Matha Ice Plant. Kootapuli
- Duration : 10 Days
- Under gone implant training in : Susee Hyundai Automobiles. Trinelveli
- Duration : 10 Days
EDUCATIONAL QUALIFICATION
- Diploma in MECHANICAL Engineering in Pastor Lenssen Polytechnic College, DON BOSCO INSTITUTION Kuthenkuly
- SSLC in St. Ann's Matriculation higher Secondary School, Panagudi with 70%.
- NDT Courses (RT, UT, MT, PT) at SEA HUB NDT SERVICES, vallioor.
- Safety Courses ( PSSR, PST , EFA, HUET, FPFS) at SNS Maritime Institute , MUMBAI
Academic Project
TITLE : WOOD CUTTER & DRILLING MACHINE Operating by a single motor
DECLARATION
I certify that the above information given by me is true to the best of my knowledge. If given a chance I will work with all my effort for the growth of the organization.
PLACE : Vallioor
DATE : 09/05/2011 (Antony Wilson. J)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4109936
Date & Time : 9th May 2011 1:56 PM (UTC)
IP Address : 114.143.11.14
Browser Info : Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident/5.0; FunWebProducts)
Predicted Country : India

[Guest]

Mahesh Kumar. M
QA/QC MECHANICAL ENGINEER.
E-mail address : Mahesh_slim AT yahoo.co.in

Objectives :
To work in a competitive and challenging work environment with continuous contribution to the organization and have professional growth in career. Eager to learn, work hard sincerely compliments my skills to your esteemed company. To become prominent in the field which I am working, where I can share and utilize my excellent communication skills, knowledge of the subject sincerely and honestly for the development of the organization and also to expertise in the relevant field that will give me scope for upward movements.
Educational & Technical Qualifications :
- Diploma in Mechanical Engineering., Karnataka Technical Education Board
- S.S.L.C, Karnataka Secondary Education Board
Technical qualification :
- CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI -UK.
CERTIFICATE NO : - 32716.
Valid till 14th December 2012.
- BGAS Level 2 PAINTING INSPECTOR CERTIFIED BY TWI -UK.
CERTIFICATE NO : -44442.
Valid till 24th October 2014.
ASNT (SNTC-TC-1A) Certification :
- Radiography Testing Level II.
Valid till 18th November 2011
- Ultrasonic Testing Level II.
Valid till 27th November 2011
- Magnetic Particle Testing Level II.
Valid till 7th November 2011
- Dye Penetrant Testing Level II.
Valid till 3rd November 2011

Nearly a 6 years of field inspection experience including Welding Inspection, Painting, coating & Ndt Inspection in petro chemical and chemical plant, Methanol & MTBE related facilities, Inspection various equipments like piping, pressure vessels, reformers, burners, sumps, tanks and tubing’s.
Work Experience :
Client : ERAM ENGINEERING (KSA).
Designation : QA/QC MECHANICAL ENGINEER.
Duration : March 2008 to till date.
PROJECTS WORKED IN THIS PERIOD :-
Client : Saudi Aramco/ Stroytransgaz, S.A.
Project : Shbab-1 Pipeline Capacity expansion Project
Client : Saudi Aramco / Stroytransgaz, S.A.
Project : Tie in Gas wells – Shed gum, Hawaiiah/ Uthmaniya / Haradh
Client : Saudi Armco/ Al-Yusr Townsend & Bottom Co., LTD.
Project : Installation of the Burner Plant J-72.
Client : Saudi Aramco/ MCDROMETT DUBAI.
Project : Sub Sea Pipeline Project P(Tanajeeb).

Client : Saudi Aramco / Increase Pipeline Capacity DR-2
Project : Increase Pipeline Capacity DR-2.
Job description :
- Witnessing / verifying the welders qualification test and approval by preparing th final JCC for the welders as per approved WPS.
- Planing the complete documentation of the project before the project start.
- Receving inspection of the materials with verification of the MTC, Purchase order and dimensions and other required cerificates.
- Coating inspection of the pipes and spools and release to the site.
- Fit-up inspection and final weld acceptance inspection.
- Weekly and monthly welders and welding repair rate report maintance of the project.
- Reporting to the QA/QC supervisor about the job and other inspection related activites.
- Review of the WPS for the projects.
- Visual inspection of piping welds and accepting as per project requirements.
- Review of documents such as welding inspection reports,Hydro test package prior to endorsement to the client and project management team (PMT) to raise request for inspection(RFI) for final acceptance.
- Motivate the operators and helpers regarding safety.
- Assist the internal and external quality auidts.
- Verifying the wps and submittal to the clients for the final approval of the client.
- Estimating the number of weld joints required for the job and making a pre inspection plan for the mechanical team for the receving and laying of the pipes.
- Worked on different lines connecting form well head to the gas gathering manifold of various dia from 8“- 30“.
- Coordination with the radiography team for the inspection of the welds and interpretaion of the rt films.
- Weekly summary of the projects weld and welders.
- Review and verification of Welding Procedure Specification submitted by subcontractors & witnessing Procedure Qualification.
- Ensuring that welding is executed in accordance with the instruction and regulations of the specification.
- Reviewing / Verifying Project Quality Plan, Quality Control Procedures, Inspection and Test Plans, Method of Statements.
- Witnessing the capability and the skill (performance) of the tradesman.
- Witnessing / verifying that welder qualification tests are in accordance with qualified welding procedures / project specifications.
- Witnessing / verifying that electrodes flux, welding rods are being stored, dried or rebaking as per manufacturer’s recommendations or project specifications / as per applicable code requirements
- Maintaing a brief welding summary of the project.
- Preparing the request for the NDT and monitoring the ndt relating activates.
- Witnessing TOFD inspection.
- Final documents preperation and subbmital accordint to the requirements of the SAUDI ARAMCO.
- Coordinating with the clienst PMT and PID for the inspection activities.
- Raising RFI and clearing the inspection aspects acccording to the ITP.
- Witnessing the coating activities in the site and shop for the assured DFT.
- Material receving inspection on site with the required checklist .
- Vefiying / witnessing the hot tapping stopple welding and of a dia 46“ live crude oil pipe linecovering more than 40 hot tap stopple welding.
- Review and maintain the project radiography films according to the project requirements.
- Verifying the welding machines for the project to check the out put is according to the relevant WPS.
- Witnessing the final hydro test of the pipeline SHABAB-2, 217 kms according to theinspection aspects.
- Survellinace and inspection during the welding for mainating the proper interpass temperature.
- Making the final as built drawing with the modified weld nos.
Company : Qatar Inspection Services WLL/ Doha Qatar
Position : QC/ Welding Inspector & NDT Supervisor
Duration : Feb. 2006 to Feb. 2008
Job description:
- Witnessing / Verifying that all testing, including Ultrasonic Testing, Radiographic Testing, Magnetic Particle Testing, Liquid Penetrant Testing & Post Weld Heat Treatment & Hardness Testing etc; on welds are carried out as per project / code requirements.
- Worked in various kinds of ultrasonic thickness gauging and weld scanning machines like usm-35, usm25, usm-22, dms-2tc, and dm-4.
- UT skills scanned on various kinds of butt joints & t-joints.
- Worked as a radiographer using techops camera using Ir- 192 source on different kinds of weld joints and profile radiography, on all techniques.
Worked on x-ray machines.
- Worked as a MPI technician using various kinds of yoke and prod. Both visible and fluorescent techniques.
- Worked on dye penetrant testing on both visible and fluorescent techniques using solvent removable dye.
- Also worked in tanks bottom plates with vacuum box for leakage testing as witness.
- Know about the hardness testing using equip-tip machine.
- Witnessed several hydro testing for pipe line and pressure vessels at Qatar fuel Additives Company plant.
- A sound knowledge on thermographs on the reformer sub headers.
- Well Versed in using infrared pyrometer.
- Also worked as a TPI on cross-country pipelines for Leighton in ALSHAQAB project.
- Also a Qatar government approved radiographer, conducted by supreme council.
- Well Versed in upipe software.
- Worked in different Petro chemical plants like Qatar petroleum, Qatar fuel additives company, Qatar petrochemical company, Ras gas, Qatar vinyl company, Qatar steel company, Qatar gas & Qatar shipping company as welding QC.
- Working with Maersk oil Qatar as a QC Inspector in their offshore platforms, stations located in north field-Qatar.
- Experienced in interpreting radiographic films as per codes and standards.
- Worked in all kinds of tank farm, spheres, pressure vessels, exchangers, heaters and nozzles for boroscopy.
Company : Sis Institute of Non Destructive Testing
Position : QC & NDT Coordinator
Duration : Jan. 2005 to Jan, 2006.
Job description:
- Preparing the weld summary reports,daily welding reports,daily fit up reports and inspecting the same.
- Scanning of the butt weld and TKY joints with ultrasonic testing methods.
- Assiging the relevant persons to the assigned job in the site.
- Coordinatin with the radiography crew and offering them the daily request for the radiography.
- Witness of the hydrotest and amking final reports of the hydrotest.
- Coordination with the construction department for the recevuing of the materials by reviewing it to the correct requirement of the project.
- Explaining the important aspects of the inspection to the welders and construction facility to produce a good quality of workman ship.
- Following the wps for the checking of fit up and welding.
- Maintaning the welders repair rate.
Project : BIOCON CHEMICAL PLANT.
Company : M. Lakshmanan & Company
Position : NDT Technician
Duration : May 2004 to Dec. 2005.
Job description:
- Verifying the drawing and section to the finished jod for dimensional inspection.
- Checking the percentage of NDT for the relevant job.
- Coordinating with the QA/QC department for the ndt.
- Giving brief demonstration of the ndt methods to the clients to their satisfactory level.
- Preparing the ndt procedure for the project.
- Making reports for the relevant job according to codes and sections.
- Review of the radiography films for WQT and project production.
- Witness of destructive test for the welders fillet weld to check the fusion.