www.safran-group.com SAFRAN Aerospace India Pvt Ltd Bangalore : Hypermesh, Abaqus, SAMCEF

[Admin]

SAFRAN Aerospace India
safran-group.com

Designation: SME/ME - CAE - Aero/Auto
Experience: 2 - 4 Years
Location: Bengaluru/Bangalore

Job Description
Job Description:
Activity: FE Meshing, Analysis and Report Preparation
Technical Skills:
1. Meshing (HYPERMESH/PATRAN)
2. Analysis (SAMCEF, ABAQUS, NASTRAN, ANSYS)
3. Technical Report Writing
4. Requirement Analysis in FEA
5. Aerospace Experience

Desired Candidate Profile
Job Description:

Technical Skills:
1. Meshing (HYPERMESH/PATRAN)
2. Analysis (SAMCEF, ABAQUS, NASTRAN, ANSYS)
3. Technical Report Writing
4. Requirement Analysis in FEA
5. Aerospace Experience

Company Profile
Safran Aerospace India, a dedicated Indian subsidiary has its Design and Development center in Bangalore. It is currently 450 employees srong and is involved in activities related to engine components, aircraft equipment and onboard software.

Address:
SAFRAN Aerospace India
CSRIE, No 32
Grape Gardens, 17th H Main Road
6th Block Koramangala
Bangalore,Karnataka,INDIA 560095

Email Address: recruitment@safran.in
http://www.safran-group.com/

Keywords: Hypermesh, Abaqus, SAMCEF

[Guest]

KALMESH.B.AMAGOND Mobile: 9481137340, 9960437959
e-mail: kalmesh.amagond@gmail.com


OBJECTIVE:
I am looking for an organization that lends me a supportive and ample chance to contribute and diversify my knowledge and skills. I hope your organization challenges me intellectually and offers me a good potential for future growth.

Domain Skills: 2D to 3D conversion, Drafting, Assembly, solid & Surface design.

CAD Skills: Catia V5, Auto Cad 2000.

Secondary Skills: Team centre and Basic knowledge of GD & T.

Educational Qualification:
- B.E in MECHANICAL Engineering from BLDEA’S College of Engg & Tech, Bijapur, Board: VTU, Belgaum. (69%, 2005)

WORK EXPERIENCE:
A total 3+ years of experience as a design engineer in Automotive and
Aerospace domain.

- Working as a Project Engineer at Taco Visteon Engineering Pvt Ltd-Pune, since Dec 2007 for automotive interiors.
- Worked as a Design Engineer at HCL Technologies Ltd, Bangalore from April 2007 to Dec 2007 for aerospace.
- Worked as a Design Engineer at Geometric Software Solutions Co Ltd, Bangalore from Aug 2005 to March 2007.

PROJECT PROFILE:
01 Project Name Product design & Development of Front Bumper
Company Taco Visteon Engineering Pvt Ltd-Pune.
Client Mahindra & Mahindra
Description of the project - Input from the customer was styled ‘A’ surface.
- Section Proposals for mounting in Front Bumper assembly. Sections were also including the interface between different parts
- ‘B’ side surface creation from the ‘A’ surface & to provide the attachment features with reference to tooling direction.
- Proposal for Reinforcement structure.
- Fixture creation for Bumper Facia.
- Maintain gap & flushness condition.
- Draft analysis.
- Drafting & detailing of Bumper assembly & its parts.
Responsibilities Product design & Development
Software CATIA-V5

02 Project Name Re-mastering of Door
Company Taco Visteon Engineering Pvt Ltd-Pune.
Client Chrysler
Description of the project - Input from the customer was wire frame data
- Creating the output, independent of input model.
- That is convert unparamaric model into parametric model.
Responsibilities 3D modeling from the given input.
Software CATIA-V5

03 Project Name Drawing creation for IP
Company Taco Visteon Engineering Pvt Ltd-Pune.
Client Mahindra & Mahindra
Description of the project - Creation of drawings according to customer’s standards & specifications direction.
Responsibilities Drawing creation
Software CATIA-V5

04 Project Name 2D to 3D conversion of Sheet metal parts. (Bracket, Diaphragm, Angle, Plate, Intercostals, Skin panel, Doublers, etc…)
Company HCL Technologies Ltd, Bangalore.
Client Alenia Aeronautica, Iteli.
Description of the project - Modeling and detailing of structural components of the aircraft such as bulkheads, ribs, skin, spar, doublers.
- Input data are in tiff format or V4 data. Find the location of the given input using assembly drawings.
- Create 3D models are in generative sheet metal or Aerospace sheet metal workbench in given location and create drawing according to customer specification & standard.
- Save the catpart & catdrawing in the team centre.
- Prepare the weight sheet and save it in Team centre.
- Fill the Engineering sheet in team centre as per given input.
Responsibilities 2D to 3D conversion.
Software CATIA-V5

05 Project Name 2D to 3D conversion. (Bracket lock front, rail track upper, rail track lower, etc…)
Company Geometric Software Solutions co Ltd , Bangalore
Client Volvo Information Technology, Bangalore
Description of the project - Given inputs are in tiff form & create models matching to tiff and created drafting using new template & standards.
Responsibilities 3D modeling from the given input.
Software CATIA-V5

06 Project Name Drawing creation.(Recliner upper mounting plate, recliner upper hart)
Company Geometric Software Solutions co Ltd , Bangalore
Client Volvo Information Technology, Bangalore
Description of the project - Creation of drawings according to customer’s standards & specifications.
- Quality check done according to check list.
Responsibilities Drawing creation
Software CATIA-V5
Awards & achievements
- Best Team award in TACO Visteon.

Trainings Undergone
- Plastic training in TACO Visteon by NTTF Bangalore.
- GD & T training given in TACO Visteon by Symphony Technologies.

PERSONAL DETAILS:
NAME : Kalmesh .B. Amagond
FATHER NAME : Balasaheb. R. Amagond
PERMANENT ADDRESS : S/O B. R. Amagond, Teachers colony near Ashram
Road Bijapur-586101, State-Karnataka.
TEL-PHONE : 08352-264627
DATE OF BIRTH & PLACE : 5-2-1983, Bijapur
NATIONALITY : Indian
MARITAL STATUS : Bachelor

PLACE: YOUR’S FAITHFULLY
DATE: (Kalmesh B Amagond)

[Guest]

Eranna D Nimbal
CAREER OBJECTIVE
To obtain long terms employment with a well established organization where I may fully utilize my skills and abilities.To be a Reliable worker with the ability to quickly learn new concepts and skills.
ACADEMICS
M.Tech in PRODUCT DESIGN AND MANUFACTURING
Institute : R.V College of Engineering Bengaluru-60
Board : VTU Belgaum
Year of passing : July 2011
Score : 71.5% (3rd sem)
BE in MECHANICAL ENGINEERING.
Institution : PDA College of Engineering, Gulbarga.
Board : VTU Belgaum
Year of Passing : 2009
Score : 65.12%
Pre University Education
Institution : R D Patil PU College Sindagi
Board : Karnataka State Secondary Education Examination Board, Bangalore.
Year of Passing : 2005
Score : 76.34%
Secondary Education
Institution : Shri Mahanteshwar H.Sc. Chinamagera.
Board : Karnataka State Secondary Education Examination Board, Bangalore.
Year of Passing : 2003
Score : 52%
TECHNICAL SKILLS
Software Proficiency : C Programming, Auto CAD2007, CatiaV5, Windchill PDM link.
Analysis software’s : ANSYS11
Operating System : Windows XP2, MS Office 2007..
Areas of interest : Automotive, PLM, Product Design & Development, Product Data , Stengths of material.
PROJECTS
M.Tech Project : Development of Green Supply Chain Strategy for Personal Computer Recycling in Bangalore.
1 Reducing the resources consumed and the waste generated when producing computers
2 Developing cleaner manufacturing processes
3 Minimizing the energy and other resources that computers consume
4 Enabling computers and components to be used (and thereby stay out of the waste stream) longer.
B.E Project : Line Following Robot to Acquire the Digital Data.
Team : 4
Description : The aim of this project is to build a line following Robot that follows the line path to reach the destination place and acquire the digital data’s such as Load Current, Voltage and Temperature then returns to the source place where it gives the same. This is quite useful under hazardous conditions where human beings cannot work, like Nuclear Reactors, boilers operations and office automation.
ACHIEVMENTS
1 Got the 3rd rank, 1st rank at Taluka level and 10th rank at District level during 8th, 9th and 10th standard in the INTERNATIONAL level Mathematics competition.
2 Attended NATIONAL LEVEL paper presentation on ADVANCED FORMING TECHNOLOGY, held at R.V College of Engineering Bangalore

[Guest]

JITHESH BALAKRISHNAN
jitheshbk AT gmail.com

CAREER OBJECTIVES
To secure a challenging position, utilizing abilities developed through my education and experience, with opportunity for professional growth based on performance.
WORK EXPERIENCE
o Completed ab-initio training of Aircraft Maintenance Engineering (mech) – 3 years course.
o Undergoing six months on job training in Airindia at their Mumbai main base.
o Fleets are b777, b747,a310.
o Worked In component overhaul department (wheels ,brakes, landing gear, cabin safety $ survival equipments, structure , and various systems)
o Assisted In c- check of b777, b747.
o Assisted In line maintenance of Airindia fleet at Mumbai international airport.
o Have experience on Lear jet 24 D(bombardier) and various light aircrafts such as Cessna 152, Hindusthan Air trainer 2, Tiger moth and larke
o Basic workshop practices such as – sheet metal repair, riveting, welding, carpentry, fabrication, doping, heat treatment, precision instruments, lathe, tools, shop machines etc.
o Carried out top overhauling of various piston engines used in light aircrafts.
o Carried out structural and control surface rigging of Lear jet 24 D.
o Studied various systems of Lear jet 24 D such as – air conditioning and pressurization system, control system, oxygen system, fire detection and extinguishing system, landing gear system(assembly, retraction, brakes etc), electrical system, hydraulic system, lighting system etc
o Studied about the assembly of JT 3D, JT 8D,CFM 56,GE 660 CJ 10 (Lear jet) engines
o Practiced ground handling of aircrafts – daily inspection, transit inspection, towing, parking and picketing, power ON and power OFF checks, engine starting (gas turbine engines),
o Practiced various maintenance activities on aircrafts such as - wheel change, brake unit replacement (multiple disc type), retraction check, greasing, compressor washing, non destructive tests, hydraulic filter servicing, , servicing of hydraulic actuators, servicing of oleo leg, nitrogen charging, rigging (controls and structure), Freon charging, inspection on wirings and circuit checks, starter generator servicing, , re-routing of cables of control system etc.
EDUCATIONAL QUALIFICATIONS
Course/Grade School/College Year of Passing Percentage
S S L C Little Flower E M HSS, Nilambur 2006 92
10 + 2 Little Flower E M HSS, Nilambur 2008 90
BA (private)
Political Science and Public Administration University Of Calicut 2012
Aircraft Maintenance Engineering
(mechanical) Southern College Of Engineering And Technology ( Approved by DGCA, India) 2010 90
(passed DGCA paper 1 $ 2 of AME license exam)
COURSE PROFILE
SUBJECTS
% of aggregate marks obtained
Air law, airworthiness requirements-1 90
Electrical fundamentals -1 94
Basic aerodynamics 93
Maintenance practices-1 85
Air law, airworthiness requirements-2 91
Human performance 93
Air law, airworthiness requirements-2 90
Electronic fundamentals and digital techniques-1 86
Electrical fundamentals -2 84
Digital techniques-2 91
Aero plane dynamics and structure 89
Maintenance practices-2 88
Jet engine -1 81
Piston engine-1 89
Aero plane systems-1 95
Avionics 90
Jet engine-2 93
Maintenance practices-3 94
Piston engine -2 and propellers 94
Aero plane systems-2 92
Light aircraft maintenance 88
Heavy aircraft maintenance 90
Piston engine maintenance 86
Jet engine maintenance 90
COMPUTER AWARENESS
o Basic Knowledge
o MS office
o Internet
o Hard wares
INDUSTRIAL VISITS
o Taneja airspace, Hosur ,Salem
o Hindustan Aeronautics Limited, Bangalore

[Guest]

ANKIT BHANDARI

Email : aitrankit AT gmail.com
OBJECTIVE
Seeking a position to utilize my skills and abilities in the Information Technology Industry that offers professional growth while being resourceful, innovative and flexible.

ACADEMIC DISTINCTION
Certificate/Degree School/College Year of Passing Percentage
BE(Information Technology) Astral Institute Of Tech. & research, Indore Affiliated to RGPV, Bhopal 2011 71.31
12 TH SSVM, Neemuch (M.P.) 2007 73.10
10TH SSVM, Neemuch (M.P.) 2005 67.30
COMPUTER PROFICIENCY
- Operating Systems : Windows 98, 2000,Windows 07, XP, Vista
- Software : Microsoft Office
- Languages : Basic Knowledge of C, C++, Java, J2EE, Servlet, Jsp, Struts, Jdbc, Html
- Database : SqlServer, MySql
KEY SKILLS
- Operating Systems, Data Structure, OOPS
- Data Communication, Internet Technology and Network Management, Computer Network
Projects Undertaken and Summer Training
Projects
- Indian Tourism (Major) : It is a web application by which a person who wants to know about the basic information of the Indian Tourism can easily collect it without any effort. In this project, I worked in web designing and database connectivity.
Language Used : J2EE (using Struts)
Database Used : MySql

- Hotel Management (Minor) : It is a web application by which a person collects information about various hotels. In this project I worked in web designing and database connectivity.
Language Used : J2EE
Database Used : SqlServer2005
Training
- 30 days Training at Itrac technology, Indore on J2EE (Inventory Software).
CURRICULAR ACTIVITY
- Member of techfest organizing committee in college
- Winner of Dance and Drama at School and College.
- Led the team at annual function at school
HOBBIES AND INTEREST
- Listening Music, Riding Bike, Swimming, Gardning, Jogging.
STRENGTH
- Adaptability, Self motivated and ability to motivate other, Ability to work efficiently in a team, Positive attitude.

[reach2anil20]

E-Mail : reach2anil20 AT gmail.com
ANIL JUDY KURIAN
Objective :
Seeking a creative, competitive, challenging and growth oriented career to optimally utilize & enhance my skills and to excel in it by hard work and determination and to be member of professionally managed organization, which provides challenging opportunity.
Experience Summary :
Company : BAeHAL SOFTWARE LTD.
Designation : Working as a Trainee Engineer (Technical Illustrator) in the HJT
TECHNICAL PUBLICATION Team.
Period : July 15th 2010 to till date.
Job Responsibilities : Creation of Aircraft Maintenance Manual
Project involves the complete process in the development of AMM based on the HAL development documents / specifications and Blue Prints & creating the isometric views of parts, assemblies and installations According to the Customer needs. The AMM and AIPC is created according to ATA iSpec 2200.
Software tools : Isodraw, AutoCAD.
Customer : HAL (ARDC) India
Company : Hindustan Aeronautics Limited (HAL).
Division : Aircraft Research and Design Center (ARDC).
Designation : Technical illustrator.
Period : July 15th 2010 to upto date.
Job Responsibilities :
- Converting 3D drawings to Isometric view by using Isodraw.
- Preparation of exploded views for Illustrated Parts Catalogue and AMM.
- Involved in preparing the 2D drawings by using ISODRAW.
- Delivering work as per customer requirement.
Qualification :
- Completed S.S.L.C. from S.K.M.J.H.S.S. at wayanad in the year 2007 with 90%.
- Diploma in TOOL AND DIE MAKING from Karnataka NTTF in the year 2010 with 66%
- Doing AMIE from IEI Bangalore.

Software Exposure :
Platform : Windows 98, 2000, XP, Vista
Software Package : MS Office
CAD Packages : ISO DRAW, Auto CAD.
ACADEMIC PROJECT WORK :
Project : ‘TOYOTA KIRLOSKAR MANUFACTURING LIMITED (Two Impression Pip Embossing Tool)’
Description, Role & Responsibilities :
- This project is being performed in the prestigious industry NTTF IL India pvt limited. The plant in which we are worked has production & assembly of Press tools and Moulds for different parts. Our project has an effort to automate the final packing of assembly unit.
- Weighing correct weight of the part of packing unit and delivery to customer.

Project History
Project # 1 : Creation of Technical Illustrations for Structural Repair Manual of
HJT- 36 Trainer Aircraft.
Client : Hindustan Aeronautics Limited (HAL-ARDC)
Software : ISO DRAW
Standards : ATA iSpec 2200
Project Summary : Preparation of Technical Illustrations of IPC for structural repair manual.
Project # 2 : Creation of Technical Illustrations for Aircraft Illustrated Parts
Catalogue of HJT- 36 Trainer Aircraft.
Client : Hindustan Aeronautics Limited (HAL-ARDC)
Software : ISO DRAW
Standards : ATA iSpec 2200
Project Summary : Preparation of Technical Illustrations (Aircraft Illustrated Parts Catalogue) For Junction modules and earth modules.
Project # 3 : Creation of Technical Illustrations for Aircraft Illustrated Parts
Catalogue of HJT- 36 Trainer Aircraft
Client : Hindustan Aeronautics Limited (HAL-ARDC)
Software : ISO DRAW
Standards : ATA iSpec 2200
Project Summary : Preparation of Technical Illustrations of AIPC (Aircraft Illustrated Parts Catalogue) for Controls and indicating in Front and rear cockpit.
Project # 4 : Creation of Technical Illustrations for Aircraft Maintenance Manual
of HJT- 36 Trainer Aircraft
Client : Hindustan Aeronautics Limited (HAL-ARDC)
Software : ISO DRAW
Standards : ATA iSpec 2200
Project Summary : Preparation of Technical Illustrations of AMM (Aircraft Maintenance manual) for Controls and indicating in Front and rear cockpit.
Project # 5 : Creation of Technical Illustrations for Aircraft Maintenance Manual
of HJT- 36 Trainer Aircraft
Client : Hindustan Aeronautics Limited (HAL-ARDC)
Software : ISO DRAW
Standards : ATA iSpec 2200
Project Summary : Preparation of Technical Illustrations of AMM (Aircraft Maintenance manual) for Controls and indicating in Front and rear cockpit.
Project # 6 : Creation of Technical Illustrations for Pilot notes of HJT- 36
Trainer Aircraft
Client : Hindustan Aeronautics Limited (HAL-ARDC)
Software : ISO DRAW
Standards : ATA iSpec 2200
Project Summary : Preparation of Technical Illustrations of Pilot notes for all systems in aircraft.

[Guest]

Here is my resume.,
CURRICULUM VITAE
K.Kavitha


Email kavi.29.aero AT gmail.com



CAREER OBJECTIVE


To utilize my knowledge and skills in an effective mode for the progress of the organization and my career development in the field of aeronautical.
PERSONAL STRENGTHS
The exposure which I had got while planning and organizing a number of activities and events in the College has helped me in developing to a matured personality. I believe in delivering 100% to the works assigned to me and also in contributing to the growth of the organization I belong to. Sincerity and
innovation in the work I perform has helped me a lot in delivering at the most needed times and also in interacting with a lot of people at the corporate levels.
EDUCATION PROFILE

Qualification Level Degree/ Specialisation Performance & rank University/School
Graduation-2011
B.E.Aeronautical Engineering 71% Madha Engineering College,Anna University, Chennai.
12th-2007
Higher Secondary Course 80% Raj Matriculation Hr.Sec School, Mayiladuthurai.
10th-2005
Matriculation
74%
Raj Matriculation Hr.Sec School, Mayiladuthurai.
WORK EXPERIENCE
JOB
Name of the company

Job Role
Duration
LEECOS MANUFACTURING TECHNOLOGY (I) PRIVATE LIMITED
CHENNAI
Working as an ASSISTANT EXECUTIVE DIRECTOR AND MANAGING REPRESENTATIVE

From October 2011 to present.
TECHNICAL INFORMATION
Technical interest Flight Dynamics
Worked out Performance Characteristics and Measures of airplane
Software skill Nastran & Patran, Catia, Auto CAD
Industrial Visits Industrial Coach Factory,chennai.
Ashock leyland,chennai.
Aeronautical division,IIT,guindy,chennai.
In-plant Training Aircraft Maintenance Division,Chennai Airport
Taneja Aerospace and Aviation Limited, Hosur
Jagur Airport,Bangalore.
Air Traffic Control Division,Chennai Airport.
Workshop attended Designed an RC aircraft in “The Magic of Flight” held at Coimbatore in 2010.
Participated Events - National Level Seminar in MIT,Rajalakshmi & PB Engineering College,Chennai
- “DRDO Golden Jubilee Expo” in CVRDE,Chennai
- KURUKSHETRA ’08 symposium held in Anna University,Chennai
PROJECTS
MAIN PROJECT
Project Name

Location Of Project
“TRNSIENT RESPONSEANALYSIS OF AN ECS COMPONENT INSTALLATION ON NAVAL AIRCRAFT”

Hindustan Aeronautics Limited,
STRESS DIVISION, Dynamics department
Bangalore.
Duration Of Project
Project Description
One and Half Months
- To formulate flight that can pursue successfully even at loss of control with one of the engines’ failure in case of twin engine(d) aircraft due to severe engine vibration.
- To design the mode of flight which will reasonably reduces the chances of accidents that causes due to loss of control
- Stress Occurs during Sudden landing and the shock loads are produced during landingStiffeners increases if thickness increases or modification occurs
MINI PROJECT
Project Name
Project Description
“SKII_90” Fighter Aircraft
- To design a successful aircraft with excellent features at lower cost.
- To render commercial flight service fulfillment to manufacturers and it is a Twin Engine Aircraft.
MISCELLANEOUS
Extracurricular Activities :
- Been part of school Kho-Kho and Kabadi team
- Been part of social server for hindu mission hospital
- Been part of dept’s Throw Ball team in college
- Won second prize in Vel’s Tech Engineering College, Chennai for Glider Making Competition
Hobbies :
- Designing in computer
- Making glider Para suits and paper plane of my own
- Surfing web
Languages :
- English
- Tamil
- Hindi
DECLARATION
I hereby declare that the above furnished details are true to the best of my knowledge.
Date :
Place : Chennai. (K.Kavitha)