Organisation : Uttarakhand Public Service Commission
Announcement : Syllabus
Designation : AE Assistant Engineer

Home Page : http://www.ukpsc.gov.in/
Download Syllabus Here : http://www.indianjobtalks.com/uploads/76165-AE.pdf

AE Exam Syllabus :
Civil Engineering Code No- 01
Paper-1 :
NOTE : Answer any five questions, at least two from each part.

PART A :
a) Theory of Structures :
Principles of super-position; reciprocal theorem, unsymmetrical bending. Determinate and indeterminate Structure; simple and space frames; degrees of freedom; virtual work; energy theorem; deflection of trusses; redundant frames, three-moment equation; slope deflection and moment distribution methods; column analogy; Energy methods; approximate and numerical methods.

Moving loads shearing force and Bending moment diagrams; influence lines for simple and continuous beams. Analysis of determinate and indeterminate arches. matrix methods of analysis, stiffness and flexibility matrics.

b) Steel Design :
Factors of safety and load factor; Design of tension; compression and flexural members; built up beams and plate girders, semi-rigid and rigid connections, Design of stanchions, slab and guesseted bases; cranes and gantry grider; roof trusses; industrial and multi storeyed buildings. Plastic design of frames and portals.

c) R.C. Design :
Design of slabs, simple and continuous beams, columns, footing-single and combined, raft foundations, elevated water tanks, encased beams and column, ultimate load design. Methods and systems of prostressing; anchorages, losses in prestress.

PART-B :
a) Fluid Mechanics :
Dynamics of fluid flow-equations of continuity; energy and momentum. Bernoulli’s theorem; caritation, velocity potential and steam function; rotational and irrotational flow, free and forced vertices; flow net, dimensional analysis and its application to practical problems.

Viscous flow-flow between Static and moving parallel plates, flow through circular tubes; film lubrication. Velocity distribution in laminar and turbulent flow boundary layer, Incompressible flow through pipes laminar and turbulant flow critical velocity, losses Stamption and moody’s diagram.

hydraulic and energy grade lines; siphons; pipe network. Forces on pipe bends. compressible flow-Adiabatic and isentropic flow, subsonic and supersonic velocity; mach number, shock wave, Water Hammer, surge Tanks.

b) Hydraulic Engineering :
Open channel flow-Uniform and non-uniform flow, best hydraulic cross section. Specific enegry and critical depth, gradually varied flow; classification of surface profiles; control sections; standing wave flume; Surges and waves. Hydraulic jump. Design of canals- Unlined channels in alluvium; the critical tractive stress, principles of sediment transport regime theories, lined channels; hydraulic design and coat analysis; drainage behind lining.

Canal structures- Designs of regulation work; cross drainage and communication workscross regulatiors, head regulator, canal falls, aqueducts, metering flumes etc., Canal outlets. Diversion Headworks- Principles of design of different part on impermeable and permeable foundations; Khosla’s theory; Energy dissipation; sediment exclusion. Dams- Design of rigid dams; earth dams; Forces acting on dams: stability analysis. Design of spillways. Wells and Tube Wells.

c) Soil Mechanics and Foundation Engineering :
Soil Mechanics- Origin and Classification of soils; Atterburg limits. Void ratio : moisture contents permeability, laboratory and field tests, seepage and flow nets, flow under hydraulic structures uplic and quick and condition. Unconfined and direct shear tests; triaxial test; heat pressure theories, stability of slopes; Theories of soil consolidation; rate of sttlement.

Total and effective stress analysis, pressure distribution in soils; Boussinesque and Westerguard theories. Soil exploration. Foundation Engineering; Bearing capacity of footings; piles and walls; design of retaining walls; sheet piles and caissons. Principles of design of block foundation for machines.

PAPER-II
NOTE : Answer any five questions, at least two from each part.
PART A :
a) Building construction :
Building materials and constructions- timber, stone, brick, sand, surkhi, mortar, concrete, paints and varnishes, plastics, etc, Detailing of walls, floors roofs, ceillings, staircases, doors and windows. finishing of building plastering, pointing, painting etc. Use of building codes. Ventilation, air conditioning lighting and acoustics. Building estimates and specifications. Construction scheduling: PERT and CPM methods.

b) Railways and Highways Engineering :
Railways-Permanent way ballast sleeper; chairs and fastenings; points and crossings different types of turn outs cross over setting out of points. maintenance of track super elevation creep of rail, ruling gradients; track resistance, tractive effort; curve resistance, Station yards, station buildings; platform sidings; turn tables. Signals and interlocking; level crossings.

Roads and Runways- Classification of roads, planning geometric design. Design of flexible and rigid pavements; sub-bases and wearing surfaces. Traffic engineering and traffic surveys; intersections road signs; signal and markings. Surveying: Plane Table Surveying: Equipment & methods, solution of 3 & 2 point problems.

Errors and precaution. Triangulation; Grades, Baseline and its measurement, Satellite station, Intervisibility of Stations; Errors and Least squares. General methods of least squares estimation with interdisciplinary approach, adjustment of level nets and triangulation nets.

Matrix notation solutions. Layout of curves: Simple, compound, reverse, transition and vertical curves. Project surveys and layout of Civil Engineering works such as buildings bridges, tunnels, and hydroelectric projects.