www.mottmac.in Mott MacDonald Pvt Ltd Chennai : CAD DESIGNER HVAC

[Admin]

Mott MacDonald Pvt Ltd
mottmac.in

Designation: CAD DESIGNER (MECHANICAL) (HVAC)
Location: Chennai

Job Description
Should report to the Senior/Junior Engineers & co-ordinate with other CAD Designers in preparation of drawings.

Desired Candidate Profile
Should have very good knowledge in AUTO CAD and familiar with preparation of Layout drawings & Schematic diagrams for HVAC services.

Company Profile
Mott MacDonald - India, part of a world wide Mott MacDonald Group, is a leading management and engineering consultancy service provider to the industry, infrastructure and social sectors.
Our Industry and Buildings division provides engineering services to projects from concept to commissioning viz. process, front-end, basic and detailed engineering, procurement assistance, contract management, inspection, construction and overall project management to a wide spectrum of industries such as Chemicals, Petrochemicals, Oil and Gas, Man-made Fibres, Pharmaceuticals Life sciences, Agro etc. and to a range of Buildings.

Keywords: CAD DESIGNER MECHANICAL HVAC

Apply here:
http://www.mottmac.in/workingwithus/
http://www.mottmac.in

[Guest]

I want to apply for this company as my profile suits the above requirement without login.

[Guest]

Respected Sir,
I am S.Mohammed Sait have completed Diploma in
Mechanical in the year 2008 from MAVMM Polytechnic College , Madurai.
I have done Autocadd, Pro-e course so im very much interested in
working that field I am currently working in autocadd field
fabrication design engineer.
I am presently looking for an opening in your
concern for autocadd, Pro-e wild fire2.Hence I am sending my Resume
for your kind perusal.Kindly
consider the same.

With Regards

[Guest]

CURRICULUM VITAE
E.OBULU REDDY

Email : e.reddy AT iitg.ernet.in
enimireddy09 AT gmail.com
________________________________________
OBJECTIVE :
To work in an esteemed organization where I can prove my technical and functional expertise and work towards the growth of the organization.
EDUCATION QUALIFICATION :
Degree/Exam Board/University Institution Year Aggregate percentage
M .Tech.
(Transportation Engg) IIT Guwahati IIT Guwahati 2011 75.70
B. E. (Civil) S.R.T.M.U. , Nanded M. S. Bidive Engg. college 2008 72.00
Diploma (Civil) Govt. Polytechnic college, Vijayawada Govt. Polytechnic college, Vijayawada 2003 57.00
Intermediate Board Of Intermediate
Education, AP Govt. Junior College, Kondapi 2001 76.70
SSC Board Of Secondary Education, AP SSN School, Petlur 1999 67.70
M.TECH (TRANSPORTATION ENGINEERING) DETAILS :
Course work done during M. Tech. :
i. Urban transportation systems planning vi. Traffic flow modeling and simulation
ii. Economic evaluation of transportation projects vii. Traffic engineering
iii. Numerical Methods viii. Ground Improvement Techniques.
iv. Pavement materials
v. Pavement evaluation, rehabilitation and maintenance ix. Pavement analysis and design
Exposure in Pavement Testing Lab :
I am well acquainted to the different test methods, equipments and standards for evaluation of different pavement materials and pavement as a whole. List of some of them is as under :-
- Aggregate tests : Crushing value, Durability, Impact value, Los angles abrasion value, Stone polishing value, Particle shape, Sand equivalent, Sieve analysis, Specific gravity and water absorption, Stripping and ten percent fines value test etc.
- Bitumen / Modified bitumen /Emulsion tests : Ductility, Flash and fire point, Loss on heating, Penetration, Softening point, Specific gravity, Elastic recovery, Mastic asphalt, Viscosity values, Stability to mixing with cement, Sieve analysis, Storage stability etc.
- Soil tests : California Bearing Ratio (CBR), Atterberg limits, Maximum dry density etc.
- Bituminous Mixes : Marshall Mix design, Bitumen Content Determination, Retained Marshall stability, Tensile Strength Ratio.
- Field/ Pavement evaluation tests : Straight edge, Bump integrator, Merlin, Profilometer, Benkelman beam, Falling-weight deflectometer.
Details of M. Tech. Project : Moisture Susceptibility of Bituminous Mixes with Different Fillers.
Abstract : Stripping on flexible pavements is a major problem of our highways and is the most common form of distress observed on roads. Filler, as one of the ingredient of bituminous mix, plays an important in the performance in terms of moisture susceptibility. For understanding the role of fillers in the moisture susceptibility of mixes, this study was taken up with the following objectives:
I. Characterization of fillers through X-ray diffraction, Methylene blue and Plasticity index test.
II. Preparation of Marshall Specimens with different fillers and filler contents at respective optimum binder content.
III. Evaluation of Retained Marshall Stability Test of bituminous concrete mixes with different fillers at different filler contents.
IV. Determination of role of filler type and content on moisture susceptibility of bituminous mixes.
B. Tech. Project Title : Design and Analysis of G + 2 Structures.
- Proposal of a two storied hostel building in the College of M. S. Bidve College of Engineering.
- Project work included the planning, analysis and design of the building.
Publications :
Rajan Choudhary and E. Obulu Reddy- ‘Causes Of Failures Of Flexible Pavements’, Proceedings National Workshop on Road Infrastructure and Traffic Planning in Jaipur City, pp 105-111, January 29, 2011.
R. Choudhary, E.Obulu Reddy and A.K. Rathi - ‘Inadequate drainage leading to failure of flexible pavements in India’ international conference on Advances in Materials and Techniques for Infrastructure Development, 22 - 24 June 2011, NIT Calicut. (Accepted).
T. Santhi Jagadeeswari and E. Obulu Reddy- ‘Distresses of Flexible Pavements in India’ international conference on Advances in civil engineering (ACE-2011), K L University, Vijayawada, A.P., INDIA,21-23 October, 2011. (Accepted).
Presentations made :
- Presentation on “Study of Recycled Asphalt Concrete (RAC) for Use in Surface Course in Airport Pavements” at IIT Guwahati during M Tech. 1st year.
- Presented term paper s on : Transportation and Economic Growth, Traffic modeling, Recycled asphalt concrete, Pothole repair by using cold mixes in asphalt pavements, at IIT Guwahati during M Tech. 1st year.
Technical Activities :
- Volunteer in the “Training Program for PMGSY Officers”, conducted by the Department of Civil Engineering., IIT Guwahati.
- Volunteer in the QIP course work on “Road Maintenance and Safety”, conducted by the Department of Civil Engineering., IIT Guwahati.
Software Exposure :
MS Office, MathCAD, AutoCAD, VISSIM

Declaration
I assert you that the information furnished above are all true to my knowledge. I will solely be responsible for any discrepancy found in them.
Guwahati
July-2011 (E. OBULU REDDY)

[Guest]

Resume
Lacham Kalleda
Email ID : lacham.design AT gmail.com & klm009 AT rediffmail.com
HIGHLIGHTS
A result oriented and an experienced Mechanical Engineer specialized in the design-build of HVAC Systems applied to Residential, Commercial, Hotel,Institutional, Industrial & Pharmaceutical buildings. And knowledge of Piping design and Plumbing
A motivated team player, proactive, involves in multitask work & taking initiatives and experienced in providing energy efficient solutions & cost effective designs.
To undertake & meet challenges in designing both conventional design system as well as in applying LEED design criteria, of today’s trend in order to save our planet from facing energy crisis, global warming & lesser footprint by creating what is known as Green Buildings for the better future of our mankind.
PROFESSIONAL EXPERIENCE
Project Engineering
Designed Systems & Prepared Drawings complying to Standards such as ASHRAE,NFPA, NPC & local standards
Selected equipment and Materials such as AHU, FCU, Pumps, Chillers, Heat Pumps, Cooling Towers, ERV.
Prepared Testing, Commissioning, Assessments, Project Reports, Certified Shop Drawings, Products & various Materials.
Project Management
Coordinated project work with various stakeholders during plan execution.
Projects Management : Initiate-Plan-Execute-Monitor-Control-Close.
Performed site inspections & Technical reports.
Communicated Project Plan-Scope at different stages with stakeholders

EMPLOYMENT HISTORY
1. Position : Mechanical Engineer
Duration : April 2011 to till date
Company : NORR(Architects Engineers & Planners)-Mumbai.
Location : Vile Parle Mumbai
Project : SAHARA STAR HOTEL-External room, North &
South tower, Business centre Vile parle.
Role : Reviewed shop drawings prepared by Contractor and Architect Surveying existing facility conditions Coordinating projects internally Site Co-Ordination, Checking of materials status as per specification of HVAC, Plumbing, Firefighting, Hot water generator, Water purification System. Site execution status
2. Position : Senior Mechanical Designer-HVAC
Duration : Jan 2007 to Feb 2011
Company : Bahwan Engineering co . LLC-Oman
Location : Sultan Quboos University
Project : New Common Teaching Block
Description : It is Teaching Block 5storied building With 190 Teaching Rooms and 2 No’s Big Lecture Hall Theaters. 5Nos Air Cooled screw chiller each capacity 900.5 kW, 3Nos Secondary Pumps, 8nos Primary Pumps, 3Nos TFAHU, 2Nos AHU,230 Fan Coil Units with BMS Control system.
Role : Primary duties include selection of equipments duct and pipe routing, detail design engineering of HVAC system involving heat load calculation, and preparation of drawing and specification. Acted as mediator between engineering, maintenance and outside contractors. Took bigger part in a HVAC design build construction of a 5 storey Teaching building.
3. Position : Senior Mechanical Designer-HVAC
Location : Sohar, Oman
Project : Sohar Aluminum Power Plant Phase-1, At Sohar, Oman
Client : Alstom
Consultant : Mott Mac Donald
Description : It has individual building each building having its own HVAC services(Chiller and control system) this services control by its own control panel and control system. This HVAC control panel controlled by DCS (power plant of Control system).
Role : Preparation of Shop drawing schematic diagrams Piping Isometric diagrams as per on site consustruction for WIR approval P&I D & Logical Diagrams Preparation from consultant design drawings and present to client approval. Preparation of B.O.Q.
4 Position : Senior Mechanical Designer-HVAC
Location : Amerat,Oman
Project : Sultan centre at amerat oman
Consultant : Cowi & partners LLC & Majan Engineering consultant
Role : Heat load calculations as per Client specifications, Preparation of Shop drawings, routing of ducting and piping ,design of duct and piping sizing, selection of air terminal units, pipe pressure drop calculations for pump selection, duct pressure drop calculation for AHU selection. Involved in selection of Fan coil units, AHU, Primary & secondary pumps Pressurization unit & chillers.
5 Position : Senior Mechanical Designer-HVAC
Location : Sohar,Nizwa-oman
Project : Extended Health centre At sohar & Nizwa
Consultant : ASIE ETUDES. Muscat, Oman
Client : Ministry of Health, Sultanate of Oman.
Description : It is Health centre at sohar Oman. Client recommended for package units with supply and return air duct system
Role : Heat load calculations as per Ministry of health Oman standards and specifications with different Zone wise. Involved in selection of package units. Preparation of shop drawing approval for consultant and client.
6 Position : Mechanical Designer-HVAC
Location : Ruwi, Oman
Project : TV studi
Consultant : WS ATKINS
Client : Ministry of Broad casting and television.
Role : Preparation of shop drawing and worked as a co-ordinator for MEP services.
7 Position : Mechanical Designer-HVAC
Location : Matra Ruwi, Oman
Project : Ministry of Customs & exercises
Consultant : Worley parsons international co. LLC Oman
Role : Preparation of shop drawing and worked as a co-ordinator for MEP services.
8. Position : Junior Mechanical Engineer
Duration : Feb 2003 to jan 2007
Company : Integrated Technical services and consulting
Engineers -Mumbai.
(It is consulting designing of MEP services
Company)
Location : Juhu-Mumbai
Role : Reporting to Head, Mechanical Department, I am responsible for Preparation of Heat Load Estimation. Calculation of Pump Head. Selection of pipes. Preparation of Bill of Quantities. Preparation of drawings and Verification. Designing of Ventilation systems.
Designing of Lift/ Staircase pressurization Units. Equipment Selection. Co-Coordinating with Architects and other Services.
Project :The Logos intercontinental, Victoria Island, Logos, Nigeria,
Description : Logos 1st luxury business hotel with 350 rooms, a large banquet and restaurant complex and executives office.
K.Raheja Universal, Mumbai, India.
Sahara COCR, Lucknow. Raheja legend, worli Mmbai,
Nathdwara Temple development, Nathadwara, Rajastan
Raheja Tipco, Mulund , Mumbai.
Raheja Titanium, Andheri, Mumbai
9. Position : Mechanical Supervisor
Duration : Oct2000 to May 2005
Company : Pace Air Zone( Authorised Carrier Dealer)-n Mumbai.(Pharmaceutical and Biotech plant Clean Rooms Company)
Role : Cleanroom project execution, testing, adjusting, balancing and validations.
Projects done : Abbott India GAO, Centaur pharmaceutical , Centaur chemicals GAO, Centaur Chemicals Ambernath THANA, Maharastra, Unisankyo-Chiplun Maharastra.
EDUCATION
Diploma in Mechanical Engineering branch 1995 to 1998
State Board of technical Education & Training Hyderabad.
COURSES-SKILLS UPGRADES
1.Commercial/Residential heat load & ventilation design of HVAC
2. Carrier E20-II & software for HVAC load simulation

COMPUTER SKILLS
AutoCAD2010,Micro station ,Pro/E,Microstation,MsOffice, & PDS&PDMS

[Guest]

N.S. MURALI
ns_murali75 AT yahoo.com
Muralianu04 AT gmail.com
Objective : Seeking post with experience in the field of maintenance and to enhance
my career towads mutual befit between me and company

:.
Experience
Jan 2011 to till continue Mahatma Gandhi Medical College & Research
Institute, Pondicherry.
HVAC Engineer
Feb 2009 to 2010 Nova Product Congo HVAC Supervisor
May 2007 to 2009 le royal meridian HVAC SUPERVISOR
March 2000 to 2007 Seder group Riyadh,Saudi arabia
Dec. 98-Feb.2000 Biomed Hitech Industries ltd, HVAC technician. Chennai
July 95-Nov. 98 Empee International Hotels chennai
A/C Technician
Duties &maintenance of the following equipments
Responsibilities
1 A/c compressor
Reciprocating & rotary & centrifugal compressors-Capacity : 3,000 Toness
Note : All types of Air conditions repair
2 condenser
Air Cooled / Water Cooled / Evaporative Condenser
Note : Experience in condenser tube plug
3 Evaporator
Shall and coil type evaporator /finned Evaporator /Plate surface
4 Refrigerant Controlling Devices
Hand expansion valve / Float valve /Capillary tube
Automatic expansion valve / Thermostat expansion valve
5 Cooling Tower
Nature draft cooling tower / mechanical draft cooling tower
Heat ventilating & air conditioning maintenance of HVAV systems
6 Air handling units (AHV)
Supply Fan / Return Fan. Exhaust Fan / Fan Coil Unit
(Made : Buffalo U.S.A and Westing Worth)
7 Pumps
Centrifugal / Rotary / Plunger and Gear Pumps
Multi stage pump / Mono block pump / Chemical pumps
Turbo pumps / fire pump with Generator
(Made : Buffalo U.S.A and Westing worth)
8 Valves
Fate valve / Globe Valve / Needle Valve / Solenoid Valve / Butterfly Valve
9 Plumbing and fabrication
Note : Experience in water line leakage trouble from chilled water line and city water line.
10 Agritator
Chemical reactors
Effluent water Treatment plant reactor
11 Steam Boilers,Air Compressors, D.G Sets 1240KW Maintenances
Education
Bachelor of Business Administration (BBA) Madras University
Master of Business Administration (MBA)Alagappa University
Diploma in Air conditioning & Refrigeration
Indian Air Conditioning & Refrigeration Certificate ( with First Class)

[Unregistered]

I completed my B.E mechanical engineering in 2016. I am having strong base in auto cadd and thermal engineering core side. I did not get certificate of auto cadd from caddcamm solution pvt ltd. Also my interest in thermal field like design dact.