www.flowserve.com India Controls Pvt Ltd Bangalore : GET Graduate Engineer Trainee, Mechanical

[Admin]

Flowserve India Controls (P) Ltd.
http://www.flowserve.com

Keywords: Graduate Engineer Trainee

Designation: GET - APPLICATION ENGINEERING
Experience: 0 Years
Location: Bengaluru/Bangalore

Job Description
1. Fresh BE Mechanical Graduate.
2. 70% or more aggregate.
3. Excellent communication skill.
4. Smart and presentable.
5. Go-getter attitude.
6. Sound technical knowledge.
7. Willingness to undergo One year on the job training at Application Engineering Department of an Engineering industry which in to manufacturing of Control Valves.
8. Job mainly involves learning and doing of Sizing and Selection of Control Valves, Customer interaction, Quotations, Negotiations etc.

Company Profile
Flowserve is U.S. based MNC in the business of designing, manufacturing and selling Pumps, Valves & Seals to process industry.

Address:
Flowserve India Controls (P) Ltd
plot no.4,1A, EPIP
Whitefield
Bangalore,Karnataka,INDIA 560066

Email Address: flsindiaresumes@flowserve.com

[Guest Poster]

CURRICULUM VITAE
SRINIVASA MURTHY K H
Email:blueskysrinivas AT gmail.com

Career Objective:
“Intend to build a career in challenging environment and work hard to contribute to the growth of the organization. Looking forward to an opportunity where I can utilize my skills in contributing effectively to the success of the organization.”

Qualifications :
Stream: Electronics and Communication Engineering. Course Institution Affiliation Year of passing Marks in % (aggregate)
B.E. Dayananda Sagar College of Engineering,Bangalore. Vishveswaraih Technological University. 2009 56%
PUC Presidency college, Hassan State Board of Karnataka. 2005 70%
10th Javahar Navodaya vidyalaya,hassan CBSC board 2003 72.2%

Technical Skills :
- Network Analysis
- Assembly programming languages for microprocessor 8085 and 8086.
- MS-office
- Digital Switching systems
- Control Systems
- Digital Signal Processing

Personal Information :
Date of Birth : 1st January 1988
Gender : Male.
Nationality : Indian.
Father Name : Mr. Hiriyanna Gowda
Languages known : English, Kannada and Hindi
Hobbies and Interest : Gardening, Playing cricket, chess and listening to Music.

Declaration :
I hereby, solemnly declare that all the details furnished above are true and correct to the best of my knowledge and belief.
DATE: Signature:
Srinivasamurthy . k.h

[Guest]

CHETAN A. SOLANKI

Email : chetansolanki077 AT gmail.com

Career Aspiration :
To associate myself with a progressive & esteemed organization that gives me scope to increase my knowledge & skills, to be a part of a team that dynamically works towards the growth of the organization and thus pursue a challenging, rewarding & enriching career.
Educational Qualification :
- B.E in Mechanical from Basaveshwar Engineering College, Bagalkot CGPA-7.87

University Sem1 Sem2 Sem3 Sem4 Sem5 Sem6 Sem7 Sem8
V.T.U 7.46 7.08 8.04 6.89 7.54 7.75 8.91 9.60
- Pre-university from S.R.A COMP PU COLLEGE, Banahtti in 2007 – Result -67%
- Secondary schooling from P.P.E.A High School, Rampur in 2005 - Result 80.16 %
Skill Sets :
- MODELLING Designing Softwares : CATIA V5, SOLID EDGE,
UNIGRAPHICS.
- ANYALSIS Software : ANSYS (Basic knowledge)
Training Undergone
- Completed CATIA V5 certificate course at AMITRON , Dharwad
- Participated in 2 days Robotics workshop “ IMACBOTZ ”
Academic Projects :
Project#1— PERSONAL PROJECT [5th sem]
Title : Car Model ( LAMBORGHINI ):
Modelling of the Car, a Lamborghini Gallardo Model, by using Catia V5-R16
Project#2 :
Title : Design and fabrication of formula one type vehicle:
Description : National level project organised by SAE-INDIA.
Event name : SUPRA
Team size : 29
Role : Secretary and design engineer.
Technical responsibilities : Designing of chassis in CATIA-V5.
Bagged 1st place in Supra SAE INDIA Formula 1 car National competition's in Fuel Economy and got cash prize.
ACHIEVEMENTS AND CO-CURRICULAR ACTIVITIES :
- Presented a technical paper on” Noise Supression Device” at National level student’s symposium MECH-IPRIX 2010, Davanagere
- Won 3 times District level Table Tennis competition & Participated State level
- Table Tennis champion in college
- Won prizes in Volley ball, atheletics at college level & school level
- Passed 49th, 50th & 51st Annual All India Genaral Knowledge Test, USO
- Participated in State Level General knowledge Competition by Karnataka Prathibha Academy with 80% marks

[Guest]

S VIGNESH
Email : viki.kde88 AT gmail.com
OBJECTIVE :
To develop my skills and acquire valuable experience and therefore achieve greater heights in the field of mechanical engineering.
EDUCATION DETAILS :
1. ANNA UNIVERSITY, CHENNAI, INDIA
College : M.I.E.T Engineering College, Trichy
Degree : Bachelor of Engineering
Duration : 2005-2009
Major : MECHANICAL ENGINEERING
Grade : FIRST CLASS
Percentage : 75%
Software Technical Skills : Auto CAD, Cimatron, Basic of
ANSYS, AP100N02
Microsoft Office 2010 & windows07.
2. N.H.S.S, Mannargudi.
Course : HSC
Duration : 2004-2005
Grade : FIRST CLASS
Percentage : 70%
3. N.H.S.S, Mannargudi.
Course : SSLC
Duration : 2002-2003
Grade : FIRST CLASS
Percentage : 80%
EXPERIENCE :
1. Ashwin Precision Product Pvt. Ltd.
Peenya Industrial Area
Bangalore.

Designation : Quality Engineer
Duration : August2009-Jan2010
Role : Inward inspection,
Barrier auditing for final dispatch
Prepare the check list for new coponents.
Products : Types of Bearing end plate
2. Creative Design & Manufacturing
Peenya Industrial Area
Bangalore
Designation : CNC Programming engineer
Duration : Feb2010 onwards
Role : Making AUTO CAD Drawing and
Programming in CAM (AP100NO2) for Laser cutting
Machine & Incharge for production

Other skills : a. Operating the laser machine (AMADA)
b. Machine maintenance
c. Knowledge in sheet metal fabrications drawing
d. Dealing with out side customer about drawing and costing
Products : Cyclone cluster, Base plate , Guards , distributors, motor
Plate etc..
LANGUAGES KNOWN :
Tamil : Read - Write – Speak
English : Read - Write – Speak
Kannada : Speak
Projects during degree course :

MAJOR PROJECT :
Design and fabrication of flow channels in aluminum plate and their optimization for hydrogen generation.

Description : Designed the flow field by using Cimatron
software. Fabricated the aluminum plate with CNC milling machines,
subsequently coated the plate with gold, for setting up a kit that can produce hydrogen from water by means of PEM electrolysis method.
Place : Central Electrochemical Research Institute (CECRI),Karaikudi.

DECLARATION :

The information provided above is true to the best of my knowledge and belief
Date :
Place : (S.Vignesh)

[Unregistered]

Subin P B
subinpbsubinpb AT gmail.com

PERSONAL STATEMENT :
I’m an adaptable and innovative qualified Mechanical Engineer with over 2 years experience in CFBC Boiler construction and commissioning activities.
I’m looking to develop my expertise in new concept development, simulation and validation within a forward thinking company. I look forward to build a career in an organization where I would leverage my abilities, interests & knowledge into a meaningful contribution towards meeting the organization and personal goals

KEY SKILLS :
Technical Skills :
** Pro-E wildfire 4 (Study package)
** Ansys 12.0 (Study package)
** MS Office
** CFBC Boiler execution and commissioning

Personal Skills :
** Ability to work under pressure
** Self-motivated
** Strong interpersonal skills
** Good problem solving skills
** Good communication
** Responsible and Hard working

EMPLOYMENT :
Mechanical Engineer
ThyssenKrupp Industries India Pvt. Ltd | Pune | 07.11 > 09.12
Project : Erection and commissioning of 2*45 MW CFBC Boilers.
Client : M/s Bajaj Energy pvt.ltd. Barkhera, pilibhit, U.P.
Duties and Responsibilities
** Planning of erection activities according to the availability of resources.
** Inspection and checking of materials and equipments.
** Execution of high pressure steam and water piping.
** Checking alignment and orientation of piping, duct, valves, equipments and structures.
** Execution of hydro tests for pressure parts and pumps.
** Daily progress report monitoring and reporting.
** Take part in all the commissioning activities like Boiler light up, Refractory dry out, Alkali boil out, coal firing and finally Synchronization of Boiler.
** Supervise Boiler lift Erection and Commissioning.
** Supervise Boiler lift Erection and Commissioning.
** Take part in handover activities of Boiler and Elevator to the Client.

Trainee Planning Engineer
Project : Erection and Commissioning of 2*35 MW CFBC Boilers.
Client : M/s Thermax Engineering Construction Company.ltd. Pune.
Duties and Responsibilities :
** Planning of Erection activities according to the available resources.
** Daily work progress and manpower report monitoring.
** Welding supervision and inspection.
** Allocation of duties to the each work force as per planning.
** Super vision of erection activities like piping, ducting and structural works.
** Checking of alignment of piping, ducts and structures.

EDUCATION :
Qualification School/College Board/University Year of passing Percentage (%)
Bachelor of Engineering (Mechanical) Sri Nandhanam College of Engg. & Technology, Tirupattur Anna University, Chennai June 2010 77.00
Higher secondary examination National higher secondary school Engandiyur State Board March 2006 75.55
10th St. Thomas high school Engandiyur State Board March 2004 74.33

ACADEMIC PROJECT :
Project Name : “DESIGN AND OPTIMISATION OF FLEXIBLE JOINTS USED IN
THERMAL POWER PLANTS“
Role : Team Member.
Duration : Three Months.
Description : This Project is deals with analysis of failures occurring in flexible Joint parts during practical usages.

AREA OF INTEREST :
** Power plant Engineering
** Oil and Gas
** Automobile Engineering
** Defense
** Engineering Design

CO-CURRICULAR ACTIVITIES :
Undergone an In-plant Training for 14 Days in MINISTRY OF AGRICULTURE, Tractor nagar, Ananthpur Dt., A.P

PERSONAL INFORMATION :
Name : Subin.P.B
Father’s name : Balasubramannian..P.A
Date of Birth : 02.01.1989
Gender : Male
Languages : English, Malayalam, Tamil, Hindi.

DECLARATION :
I hereby declare that the above mentioned information is correct up to my knowledge and I bear the Responsibility for the above mentioned particulars.
Place : Thrissur, (SUBIN.P.B)
Date :

[Unregistered]

PUNEETHA KUMAR B J
puneethakumarbj AT gmail.com
Career Objective : To be associated with a progressive organization that provides an opportunity to apply my knowledge and skills in order to keep abreast with latest trends and technologies.

Educational Summary :
Bachelor of Engineering (Mechanical Engineering) :
Semester Name of the Institution University SGPA CGPA
III Siddaganga Institute of Technology, Tumkur VTU 8.95
Diploma :
Course Institution Board % Mechanical Smt. L.V.(govt.) Polytechnic Hassan DTE 76.22%

Secondary education :
Course Institution Board %
10th Govt. High School, Halekote KSEEB 71.52
Tools/Packages known :
AutoCAD, Solid Edge, ANSYS, CATIA, CNC - Programming, Hyper mesh, PLC -Programming.
Project Undertaken :
Organization : SIDDAGANGA INSTITUTE OF TECHNOLOGY
Duration : Oct 2012 to May 2013.
Topic of Study : “PRODUCTIVITY IMPROVEMENT IN AUTOMOBILE INDUSTRY USING LEAN MANUFACTURING”, in M/S Prabha Engineers Hosur Tamil Nadu.

Details : Project done, the data collection on customer complaints, Root cause analysis and exploring the solutions. Management initiatives like Lean Manufacturing (for eliminating the overproduction, waiting, unnecessary transport or conveyance, over processing or incorrect processing, excess inventory, unnecessary movement and defects), Six Sigma methodology is used for optimum solutions. The study helps to improve Productivity, Achieving customer Satisfaction, On Time Delivery and ultimately it will be reflecting in the balance sheet of the organization.
Organization : SIDDAGANGA INSTITUTE OF TECHNOLOGY
Duration : Oct 2011 to May 2012.
Topic of Study : “FABRICATION OF PNEUMATIC PRINTING PRESS”

Details : Pneumatic is an attractive medium for low cost mechanization particularly for sequential or respective operations. In the pneumatic unit the printing operation is performed. Printing of labels containing the details of manufacture and the price all most all consumer goods such as tea packs, biscuits, chocolates, surf, aerial powder packs etc.
Organization : Smt.L.V. (govt). Polytechnic, Hassan
Duration : Jan 2009 to May 2009.
Topic of Study : “DESIGN AND FABRICATION OF INSTANT WATER COOLER”
Details : The INSTANT WATER COOLER is a device used for cooling the water from higher temperature to the required lower temperature. In this FREON12 is the working medium called as refrigerant. Evaporator is a device to extract the heat from the water and evaporate the refrigerant. Compressor is used for increasing the pressure and temperature of the refrigerant. The condenser is to condense the Freon12. Expansion valve is to reduce the pressure of the refrigerant. And also the thermostat is used for controlling the temperature of the Freon12.

Achievements :
1. A paper presentation on “productivity improvement in automobile industry using lean manufacturing” 4th May 2013 in International Technical Symposium AMMMT – 2013 held at Siddaganga Institute of Technology, Tumkur.
Strengths : Team Building, Dedicated, Honest, Time management.
Experience :
Supervisor Trainee (Apprentice trainee) in BHEL Bangalore from October 2009 to February 2010.
Junior Engineer in JSW Bellary from March 2010 to August 2010.

Personal Profile :
Father’s Name : Jagadeesha
Mother’s Name : Leelamma
Date of Birth : 01-02-1988
Nationality : Indian.
Hobbies : Singing, Listening music, Playing cricket, Solving Puzzles and Sudoku.
Languages known : English, Kannada, Hindi.

Date :
Place : [PUNEETHA KUMAR B J]

[vinnkc@gmail.com]

RESUME
Miss VINEETA YADAV

CAREER OBJECTIVE :
To obtain a challenging position as a “Mechanical Engineer”, in a growth oriented company, where I can fully utilize and grow my skills while contributing, for the benefits of the organization and other workmates.

PERSONAL PROFILE :
Name VINEETA HEMRAJ YADAV
Date of Birth 24/12/1991
Nationality Indian
Marital Status Single
E-mail abcxyz_kc AT yahoo.in
vinnkc AT gmail.com
Known Languages English, Hindi

ACADEMICS :
Course School Board Year Of Passing Percentage
B.E. Ahmedabad Institute Of Technology GTU 2013 74%
H.S.C Rajasthan English Hr. Sec. School G.H.S.E.B. 2009 68%
S.S.C St. Joseph school G.S.E.B. 2007 71.23%

PROFESSIONAL QUALIFICATION :
B.E.(Mechanical Engineering) from Gujarat Technological University(GTU)
7th Semester Result : SPI: 8.50 CGPA: 7.72
8th Semester Result : SPI: 8.52 CGPA:7.9

TECHANICAL SKILLS :
DESIGN SOFTWARE AutoCAD
PACKAGES MS-OFFICE

COMPANY VISITED :
NARMADA HYDROPOWER PLANT. Narmada, Gujarat
BHAGVATI SPHEROCAST PVT LTD. Odhav, G.I.D.C.Ahmedabad
PATEL AIRFLOW LTD. G.I.D.C. vatva Ahmedabad

BE PROJECT PRESENTATION :
USER DEFINED PROJECT : PADDY TRANSPLANTER
INDUSTRIAL DEFINED PROJECT : ANALYSIS ON ROTOR VIBRATION IN PATEL AIRFLOW LTD

EXTRA-CURRICULAR ACTIVITIES :
COORDINATOR IN ROBOOPUS 2012, AIT
SCIENCE EXHIBITION 2007,RAJASTHAN SCHOOL
QUIZ 2007, DIWAN-BALLUBHAI MADHYAMIK SHALA
OUTLOOK SPEAK OUT DEBATE COMPETITION 2005-2006, THE OUTLOOK GROUP

STRENGTHS :
COMMUNICATION SKILL
POSITIVE ATTITUDE
HARD WORKING
RESULT ORIENTED
MOTIVATED BY NEW CHALLENGES
TEAM FACILITATOR
COMPREHENSIVE PROBLEM SOLVING ABILITIES
WILLINGNESS TO LEARN

AREA OF INTEREST :
PRODUCTION PLANNING
MANUFACTURING
QUALITY & CONTROL

Though, being a fresher, getting an appropriate opportunity, I will prove my capability to the best of my superior in this company.

DECLARATION :
I hereby declare that all the information given above is true to best of my knowledge.