Hindustan Shipyard Limited Recruitment 2013 HSL : Management Trainee, General Manager

[hemalathaijt]

Name of the organisation : Hindustan Shipyard Limited (hsl.gov.in)
Name of the post : Recruitment 2013 Management Trainee, General Manager
Total Post : 50
Reference No. : ADVT. NO.PD/E/0102/02/2013 dated 03 Oct 2013
Advertisement : http://www.indianjobtalks.com/upload...dv08102013.pdf
http://www.hsl.gov.in/RecruitmentNotices.aspx

Retainer, Care Taker Recruitment : http://www.indianjobtalks.com/forum/...ad.php?t=74369

To view all posts related to <hsl.gov.in>

HSL is the pioneer Shipbuilding and Ship repair Yard functioning under the Ministry of Defence. The Company is looking for dynamic and result oriented personnel with proven track record for the following posts.

I) Name of the post : GENERAL MANAGER (TECHNICAL)
No. of post : 2
Post Code : : 02/2013/GM01
Essential Qualifications : Should be an Engineering Graduate in Mechanical/ Electrical/ Electronics/ Naval Architecture/ Industrial Engineering with an aggregate of not less than 55% of marks in the qualifying exam.

(II) Name of the post : GENERAL MANAGER (DESIGNS)
No. of post : 1
Post Code : : 02/2013/GM02
Essential Qualifications: Should be an Engineering Graduate in Mechanical/ Electrical/ Civil - with Post Graduate Degree/ Diploma in Naval Architecture or Degree in Naval Architecture with an aggregate of not less than 55% marks in the qualifying exam.

(III) Name of the post : GENERAL MANAGER (PERSONNEL & ADMINISTRATION)
No. of post : 1
Post Code : : 02/2013/GM03
Essential Qualifications : Graduate in any discipline with Post Graduate Degree/ Two year Post Graduate Diploma in Labour & Social Welfare or Labour studies or PM & IR or HR Management or MBA with Personnel Management awarded by recognized Universities/ Institutes registered with AICTE with not less than 50% of marks in qualifying examination.

(IV) Name of the post : DEPUTY GENERAL MANAGER (FINANCE)
No. of post : 1
Post Code : : 02/2013/DGM01
Essential Qualifications : Graduate with a pass in the Final examination of the Institute of Chartered Accountants of India/ Institute of Cost & Works Accounts of India / SAS

(V) Name of the post : DEPUTY GENERAL MANAGER (TECHNICAL)
No. of post : 4
Post Code : : 02/2013/DGM02
Essential Qualifications : Should be an Engineering Graduate in Mechanical/ Marine Engineering/ Electrical Engineering/ Naval Architecture with an aggregate of not less than 55% of marks in qualifying exam.

(VI) Name of the post : DEPUTY GENERAL MANAGERS (SUBMARINE TECH)
No. of post : 1
Post Code : : 02/2013/DGM03
Essential Qualifications : Should be an Engineering Graduate in Electrical/ Mechanical/ Electronics with an aggregate of not less than 55% of marks in qualifying exam.

(VII) Name of the post : CHIEF MANAGER (TECHNICAL)
No. of post : 1
Post Code : : 02/2013/CM01
Essential Qualifications : Should be an Engineering Graduate in Mechanical/Marine Engineering/ Electrical Engineering/ Naval Architecture with an aggregate of not less than 55% of marks in qualifying exam.

(VIII) Name of the post : MANAGER (PERSONNEL & ADMINISTRATION)
No. of post : 2
Post Code : : 02/2013/MGR01
Essential Qualifications : Graduate in any discipline with a Post Graduate Degree/ Two year Post Graduate Diploma in Labour & Social Welfare or Labour Studies or PM & IR or HR Management or MBA with Personnel Management awarded by recognized Universities/ Institutes registered with AICTE with not less than 50% marks in qualifying examination.

(IX) Name of the post : MEDICAL OFFICERS AT DY. MANAGER (E3)/ SENIOR MEDICAL OFFICER (E2)/ MEDICAL OFFICER (E1)
No. of post : 3
Post Code : : 02/2013/MED01
Essential Qualifications : Candidate should have MBBS Degree and registered with Indian Medical Council.

(x) Name of the post : MANAGEMENT TRAINEES
Total : 34 Posts
(a) TECHNICAL :
No. of post : 22
Post Code : : 02/2013/MT01
Essential Qualifications : Full-time Bachelor’s Degree in Engineering or Technology from a recognized Indian University/Institute with minimum 60% of marks in the aggregate of all years/semesters (55% in aggregate for SC/ST candidates) in the disciplines of
(i) Mechanical/ Mech. Marine
(ii) EEE
(iii) Naval Architecture

(b) HR :
No. of post : 6
Post Code : : 02/2013/MT02
Essential Qualifications : Should be a Graduate in any discipline with Two years full time Post Graduate Degree or Diploma or Three years part-time Post Graduate Diploma in HRM or MBA with Specialization in HR awarded by recognized Universities / Institute registered with AICTE with 60% of marks (55% for SC/ST).

(c) FINANCE :
No. of post : 6
Post Code : : 02/2013/MT03
Essential Qualifications : A Graduate with a pass in the final examination of the institute of Chartered Accountants of India/ Institute of Cost & Works Accountants of India

Fee : Demand Draft (DD) drawn in favour of M/s Hindustan Shipyard Ltd., payable at Visakhapatnam
Management Trainee posts : Rs.300/-
Other posts : Rs.100/-
No Registration fee for SC/ST/PH Candidates.
Candidate should write his/her ONLINE Registration Number, Name, and Date of Birth at the back side of the Demand Draft (DD).

How to Apply :
i) The Application should be submitted ONLINE via HSL Website.

ii) Print-out of the filled Online Application, DD along with attested copies of Degree/PG Marks lists, Provisional Certificate, Proof of Date of Birth, Caste Certificate, Experience certificates and Annexure-I if applicable., must be forwarded through Postal/Courier Services and should reach
Dy. General Manager (Per & Admn),
Hindustan Shipyard Ltd.,
Gandhigram (PO),
Visakhapatnam
on or before 10 NOV 2013.

Important Dates :
Date of commencement of ONLINE application for Experienced Posts. : 09 Oct 2013
Date of commencement of ONLINE application for Management Trainee Posts. : 14 Oct 2013
Last date for ONLINE submission for all posts (Once submitted, editing is not allowed) : 31 Oct 2013 up to 1700 hrs
Last date for Edit / Saved application and resubmission for all Post Code : s. : 31 Oct 2013 up to 1700 hrs
Last date for submission of copy of the printed Online Application, DD along with mandatory enclosures by Post / Courier. : 10 Nov 2013 up to 1700 Hrs

[Unregistered]

Work Experience :
Name of the Company Working from – To Designation Working Area
G.R Engineering Pvt. Ltd , MRPL site. 25/05/2009 30/1/2010
Production and Quality Engineer
** Production of Gas containers of length 97325mm and inner diameter 7000mm at MRPL.
** Assisting Senior Engineer in the fabrication of bullet vessels(Gas containers)
** Quality maintenance as per ASME & ISO standards.
** Estimation of work involved in the project.

Responsibilities
** Estimation and costing of all the materials required for fabrication.
** Preparing bill of all the required materials and welding consumables as per drawing or design given by the client.
** Preparing indent for the required materials.
** Preparing work schedule and planning.
** Responsible to complete site survey and specify the scope of work.
** Mobilization of necessary equipments, materials and manpower on respective sites.
** Coordination between the higher authority and subordinates.
** Executing the work as per drawing and design.
** Preparing WPS (welding procedure specification) and WQT (welder qualification test).
** Quality control of all the equipments as per ISO standards.
** Quality control as per the design & drawing standard.
** Submitting daily progressive report to the office.
** Organize, Inspection and testing and examination of all products and components as specified in quality plan.
** Welding inspection, radiography testing, UT testing, and magnetic particle testing.
** Review and witness for various inspections performed.
** Controlling the quality of products and manufacturing records as per quality plan.
** Preparation of internal quality control reports and manufacturing record data at various stages of job.

Name of the company Working (from –to) Designation Working area
C.R Asia, PetroChem services Pvt. Ltd , Mumbai 1/02/2010 To 30/06/2010 Maintenance Engineer (QA/QC)
** Loading of catalyst
** Unloading of catalyst
** Maintenance of all pressure vessels.
** Maintenance of reactor, exchangers, reformers, columns and pipe lines
** Documentation of all the work at the site as per ISO standards

Responsibilities :
** Estimate and plan about the resources required at the site.
** Estimation of the man power, tools and equipments and sub-contractors.
** Estimation of the time and resources required to complete the job.
** Loading and unloading of the catalyst
** Screening of the catalyst and reloading it into vessel.
** Chemical cleaning of the pressure vessel
** Sludge cleaning of the pipe line using Rotomol cleaning process.
** De-coking de-scaling technology (DDT) is used to clean the entire pipe line of a plant.
** Cleaning process also includes pegging
** Responsible to complete site survey and specify the scope of work.
** Quality control of all the equipments as per ISO standards.
** Supervision of subordinates to ensure that all work is carried out efficiently and safely.
** The performance of safety audits within work area is been conducted.
** Every day safety tool box talk before starting work is been conducted.

Name of the company Working from -to Designation Working area
A B F Engineering, Pvt international ltd. 1/07/2010 – 1/12/2010 QA/QC engineer
** Production of structures and Pressure vessels.
** Inspection of the structures an Pressure vessels.
** Maintaining of documents on daily basis as per ISO standards.
** And practice of NDT at the shop floor where fabrication is done.
Responsibilities :
** Quality control inspection and hydrostatic pressure testing of fabricated and installed process piping, tanks, and vessels.
** Quality control inspection on sandblasting and painting operations.
** Coordination and monitoring on non-destructive testing requirements on completed weld joints.
** Executing the work as per drawing and design.
** Preparing WPS (welding procedure specification) and WQT (welder qualification test).
** Quality control as per the design & drawing standard.
** Control of Incoming material inspection report.
** Review and witness for various inspections performed, Welding inspection, radiography testing, UT testing, magnetic particle testing.
** Submitting daily progressive report to the office.
** Estimation and costing of all the materials required for fabrication.
** Preparing indent and purchase order for the required materials.
** Preparing bill of materials as per fabrication required.
** Execution of fabrication and erection of pipe line according to the layout given.
** Inspection of the isometric layout and valuation of correction with the contractors and client.
** Inspection of pipe fitting and welding at each stage of process.
** And also knowledge in pressure piping B36.4 and B36.8.
** And also of knowledge in piping erection.

Name of the company Working from - to Designation Working Area
ROWAN DRILLING COMPANY , KINGDOM OF SAUDI ARABIA
Jan 2011 to June 2012
Mechanical engineer Maintenance of daily records and inventory of all the drilling equipment
Responsibilities :
** Preparing daily performance report on the basis of daily drilling report of different rig.
** Maintaining all the records of drilling materials at the ware house and the respective yard.
** Preparing PR (purchase requisition) for the assigned quotation as per company norms using SAP software.
** Preparing and maintain all drill pipe inventory of different rigs and yards.
** Preparing work force report and categorizing it with the Saudi nationality and non Saudi nationality as per required by the company and ARAMCO officials.
** Looking after the supply of required materials to different rig from the warehouse.
** Verify quantities and contents of all shipments to, from and between the rig(s).
** Ensure that all materials received on rig are properly stored in accordance with storage and preservation procedures.
** Issue materials to rig personnel and ensure delivered materials are documented
** Communicate with Customer / Operator or Service Company personnel to facilitate management of materials.
** Preparing bidding document for consigned drilling contract tenders for each rig.

OFFSHORE DUTIES :
** Maintenance of offshore Diesel engine 3516 Caterpillar i.e. changing of oil and oil filters, checking for the clearance in diesel supply to the engine continuously.
** Maintenance of air compressors i.e. changing the air filter, cleaning the radiator, feeding the coolant oil.
** Transfer of fuel and drill water from one tank to another and also receiving diesel from ships.
** Updating daily engine log sheet and updating diesel tank, air compressor and water maker reading.
** Daily maintenance of slop traps system (Kitchen waste treatment system).
** Daily maintenance of OMNI PURE system (Sewage water treatment system).
** Daily maintenance of Water maker system i.e. changing the water micron filters, creating manual back wash on the system.
** Taking on the diesel from the boat into the tank.
** Transfer of diesel from tank to tank by CENTRIFUGE and SOCK FILTER system.
** Maintenance of CENTRIFUGE by cleaning it on weekly basis and changing filters in SOCK FILTERS.

Name of the company Working (from –to) Designation Working area
TECHNOFIT TRADING TR LLC, MUSCAT Sept 2012 to till date Quality Engineer
QA/QC Oil & Gas supplies of all materials to
PDO
Responsibilities :
** Follow up of orders on everyday basis and recording in Excel sheet.
** Through knowledge of all kind of materials (carbon steel, stainless steel, Nickel Alloy, Duplex and Super duplex) and their relevant codes and standards.
** Review of drawing, calculation and ITP (Inspection Test Plan)
** Review of MTC’s, IR (Inspection Report) and IRN (Inspection Release Note)
** Review of inspection report of base material, UT report, X-Ray report, tensile test report, Hardness report etc.
** Reviewing all the MTC’s and reports from manufacturer according to relevant Shell standards and SPEC (i.e. DEP standards, SP standards, ASTM standards and ASME standards)
** Review and approval of WPS/PQR certificate of all welded materials.
** Visual inspection of all the materials and approving it to send PDO for final inspection and erections
** Review of NCR’s (Non conformance Report) and resolving and closing the NCR.
** Preparing MRB (Manufacturers Record Book) and producing it to Client.
** Following up for the inspection of the material with TPI (Third Party Inspector) and assuring with the manufacturer, inspection is according to ITP.