Name of the organization : Indian Institute of Information Technology & Management
Type of Announcement : Infotsav'13 National Level Tech Fest
Location : Gwalior
Home Page : http://www.iiitm.ac.in/

To view all the posts related to <iiitm.ac.in>
Robo Race :
Rules :
** Only one bot per team is allowed.
** Max no of people per team is 5.
** Robots must be manual. Both wired and wireless remotes are allowed.
** Onboard power supply should be present and it should not exceed 15V between any two points.
** There is no time limit for the completion of the race.
** The robot which wanders off the arena shall be disqualified.
Timeline :
** This event will be held from 15th Nov 2013 to 17th Nov 2013.

Robo Soccer :
Rules :
Game Procedure :
** Each team can have only 1 member.
** Team have be pre ready with their bots .No Time will be given after the bot is on the Arena.
** There will be different colours of ball and similar posts to them. The bots have to put the balls in the respective posts.
Specifications :
** The dimension of the bot should not exceed 30cm x 30cm x 30cm.
** The weight of the bot should not exceed 5 Kgs. (Excluding remote control and remote control wire.)
** In case of a wireless bot weight will be counted as (0.8x actual weight).
** Readymade gear boxes, parts, chassis, control circuits and remote control can be used.
Bot control:
** In case of wired bots, the wires should remain slack at any instant during the fight. All the wires coming out of the machine should be stacked as a single unit. Also, the wires should be projected 1000 mm above the ground to avoid entanglement.
** In case of wireless system, it should have a minimum four frequency remote control circuit or two dual control circuits or a transmitter receiver paired module so that the frequency interferences with opponent team can be avoided (in case of any interference in the wireless systems, they will not be considered for rematch or in the results).
** Remote controls that are readily available in the market may also be used.
Battery & power:
** The machine can be powered electrically only.
** Use of an IC engine in any form is not allowed.
** Batteries must be sealed, immobilized electrolyte types (such as gel cells, lithium, NiCad, NiMH, or dry cells).
** The electrical voltage at any point of time in the machine should not exceed 40 V DC/AC.
** 230V (AC) power will be provided.(wired bots).
** In case of wireless bot batteries should be placed on the bot also teams cannot use 230V(AC) external supply.
Timeline :
** This event will be held from 15th Nov 2013 to 17th Nov 2013.

More events get here : http://infotsav.org/

Contact Us :
Morena Link Road,
Gwalior ,
Madhya Pradesh, 474010