www.sauer-danfoss.com India Pvt Ltd Pune : Hydraulics Application Engineer

[Admin]

Sauer-Danfoss India Private Limited
http://www.sauer-danfoss.com

Designation: Sr. Application Engineer
Experience: 4 - 7 Years
Location: Pune

Job Description
-- Application Engineering
- Preparation of technical offers.
- Schematic drawings, commissioning of prototypes
- Design hydraulic circuits
- Standardizing customer oriented applications
- Giving technical back up to sales team & vendors

Skills & Attributes:
Compulsory:
- Knowledge of Hydraulics – working, hydraulic components & Systems
- Experience in working as application / designing of industrial / mobile hydraulics.
- Working experience in AutoCAD 2003 or higher versions.
- Basic computer skills.
- Good writing and communication skills in English
- A good team player with proven ability to work and adapt to challenging and demanding environment.

Desired Candidate Profile
- Knowledge of Hydraulics – working, hydraulic components & Systems
- Experience in working as application / designing of industrial / mobile hydraulics.
- Working experience in AutoCAD 2003 or higher versions.
- Basic computer skills.
- Good writing and communication skills in English
- A good team player with proven ability to work and adapt to challenging and demanding environment.

Desirable
- Some field experience in hydraulics.

Company Profile
Sauer-Danfoss Overview
Sauer-Danfoss is a worldwide leader in the design, manufacture and sale of engineered hydraulic and electronic systems and components, for use primarily in applications of mobile equipment. Sauer-Danfoss, with approximately 9,000 employees worldwide, has sales, manufacturing, and engineering capabilities in Europe, the Americas, and the Asia-Pacific region.
From hydrostatic transmissions to steering components, and from motors and valves to open-circuit pumps and electrohydraulic controls, Sauer-Danfoss is a comprehensive supplier of mobile hydraulic solutions as either components or integrated systems.
We offer our customers optimum solutions for their needs and develop new products and solutions in close cooperation and partnership with them.

Address:
Sauer-Danfoss India Private Limited
Gat No. 94-100
High Cliff Industrial Estate
Wagholi Rahu Road, Village Kesnand
Pune,Maharashtra,INDIA 412207

Email Address: jnatu@sauer-danfoss.com , singale@sauer-danfoss.com

Keywords: Application Engineering

[Guest-IJT]

Dear Sir/madam,

Please find attached here with the Resume for the above said post.

Regards
surinder

Curriculum Vitae

Surinder Singh
Email : kalra_1981 AT yahoo.co.in

JOB OBJECTIVE

To obtain a Engineers career within a progressive design team or major manufacturer that will encourage and assist me on furthering my education and that allows the utilization of my professional skills.


BRIEF OVERVIEW

- In knowledge and experience of AUTO CAD.
- Team member experience on successfully delivered projects.
- Creative, ambitious and committed, with strong technical & communication skills.

EXPERIENCE SUMMARY : -

5 years experience in Mechechinal & Piping.


CURRENT EXPERIENCE : -
Presently working as a Asst Manager(Estimation and Design) in M/s Agnice Fire Protection Ltd, New Delhi (Since Dec, 2005 to till date)

JOB RESPONSIBILITIES : -
- Handling Northern India Enquiries and preparing quotations for Upcoming Projects (Water based system as well as Gas Suppression systems(Both CO2 and Inergen.)
- Design & drafting piping layout for fire fighting Water Spray system in Industrial and Thermal power plant.
- Design & drafting piping layout for fire fighting system in residential and commercial buildings based on Schematic Diagram.
- Taking Part in Execution of Projects and site coordination.

.
Projects Handled :
1) Done Estimation and Designing for Retrofitting of Fire Protection and Detection System of 1x110 MW Thermal Power Plant, Panipat from BHEL Bhopal. The project is awarded to us through E- bidding process.
2) Done Estimation and Designing for Fire Protection and Detection System for 3x5 MW Indira Sagar Hydro Power Project, Khandwa from BHEL Bhopal.
3) Done Designing along with my team for Fire Protection and Detection System for Bongaigaon Refinery and Petrochemicals Limited including Water Based and Foam Systems.
4) Done designing for HVW Spray Systems for Hydrogen Bullets in IOCL Refinery Guwahati, Assam.
5) Done Tendering and Designing for 3x9 MW Jaldhaka Hydel Power Project from VATech Bhopal.
6) Done Designing for Fire fighting as well as LP Piping for 1x18 MW Captive Power Plant for Aryan Ispat & Power Pvt Limited, Sambalpur Orissa.
7) Done Tendering for 6x200 MW Teesta Hydel Power Project for Andritz Hydro Pvt Limited Bhopal.
8) Done designing for Fire Protection and Detection System for Airport Services Building, IGI International Airport through Larsen and Toubro ECC Division.
9) Done Estimation and Designing for Fire Fighting and Detection System for 6 District Civil Hospitals awarded us through L&T ECC Division.
10) Done Estimation and detail engineering for 2x300 MW Rosa Thermal Power Project Stage-II for Reliance energy Limited.
11) Doing Engineering for 2x250 MW Bina Thermal Power Plant for J.P Power (Tata Consulting Engineers Ltd, Bangalore.)
12) Doing detail engineering for 2x270 MW Thermal Power Plant at Goindwal Sahib Punjab, through Punj Lloyd Limited for GVK Power. The consultants are Fichtener Chennai and Tata Consulting Engineers Limited, Bangalore.

COMPUTER SKILLS

Platforms : MS-Office, Windows 98/2000/NT
Software : AutoCAD
TECHNICAL QUALIFICATIONS

- Diploma in Electronics and Communication from Guru Tegh bahadur Polytechnic Institute Vasant Vihar, New Delhi. Passed in 1st division with Distinction in 2002.

- Bachelor’s Degree in Mechanical Engineering from Asian Institute of Management and Technology, New Delhi(Through Distance Learning Program). Passed in 2010.

[Guest]

CURRICULUM VITAE
pavankumar001 AT gmail.com

Objective :-
Seeking responsibilities and continuous learning opportunities in Mechanical Engineering domain commensurate with my knowledge and skills.
Academic Profile :-
- Master of Technology in “Thermal Sciences and Energy Systems”.Aggregate :82% Year of passing: 2005 from G.Pulla Reddy Engg College, S.K.University,Anantapur.
- Bachelor of Engineering, “Mechanical Engineering. Aggregate
73 %Year of passing : 2001 from Vasavi Engg College,
Osmania University, Hyderabad.
Work Experience :-
- Working as a Deputy Manager in VOITH HYDRO Pvt. Ltd, New Delhi in Turbine Division from May 2007 till date.
- Worked at KIRLOSKAR BROTHERS Ltd, Pune, in “Corporate Research and Engineering” division from Nov-2005 till March 2007.
- Worked as faculty in engineering academy from 2002 till 2003.
- Selected as Graduate Engineer Trainee in MAHINDRA & MAHINDRA LTD, R&D division, Vehicle Engineering Department, Zaheerabad and worked till August 2001.
Software Exposure :-
- Voith Inhousetools ( Simsen and Cal2)
- Analysis / Modeling tools :Basic exposure to FLUENT / GAMBIT
- Applications : MS office
Onsite Assignments :-
- Deputed to Voith Hydro Holding Gmbh & Co KG, Germany, from June 2009 till March 2010 for working on Hydraulic application and Transient calculations.
1. Role in the assignment :
- Worked as “Hydraulic application Engineer” for “Bhasmey hydroelectric power project” of M/s GATI Ltd.
- The project comprised 2 units each of 30.4 MW output coupled to synchronous generator with 375 rpm speed and having a rated net head of 107.5 m.
- As an application engineer my role included checking and confirmation of all hydraulic parameters, making right selection of turbine with regard to efficiency, setting , cavitation criteria, part load operation limits, coating issues, seal geometry and homologous model availability.
- After the selection was made the same was discussed with engineering competence center and a Hydraulic datasheet comprising efficiency levels at different operating regimes was furnished.
- Once the Hydraulic application was completed, Transient studies were performed to predict implicit hydraulic phenomenon resulting from sudden changes in the flow conditions and its manifestation as pressure rise and speed rise. The water conductor system was studied in detail and calculations were carried out for various wicket gate closing/opening, selected mode time & rate for wicket gate opening/closing. Finally the most optimum closing/opening pattern was selected so that pressure rise and speed rise were kept within allowable limits.
- This study was carried out by using well known interactive software tool ‘SIMSEN’. This program, is a modular simulation software for the analysis of energy conversion systems, which determines the hydraulic state variables in the water conductor system at the machine in the time domain.
- Attended seminar on SIMSEN software used for transient calculations of Hydro Power Plants.
Professional Experience at Voith :-
Responsibilities :
1) Offer to Order engineering activities for small and large hydro projects.
- Study of tender specifications provided by customer / consultant.
- Checking basic input parameters like operating head range, power or flow, water way geometry details, water level in the reservoirs, speed and pressure rise values for every individual project for performing hydraulic application and transient calculations.
- Seeking clarifications from customer for missing hydraulic parameters.
- Preparation of other possible alternative solutions (e.g. speed and type of machine).and discussion with the customer
- Study of amendments/clarifications issued by customer and accordingly incorporating in final turbine selection.
2) Hydraulic Application.
- Hydraulic Application is performed to achieve best possible efficiencies with due consideration in setting, speed and size of the machine to have a good techno-economical solution.
- The chosen solution is discussed with engineering competence center, Germany for final approval.
3) Transient Calculation.
- Water way configuration is checked to limit values of speed rise, pressure rise/drop, surgeshaftoverflow (if applicable) to prescribed values in the specification by varying the closing time values and moment of inertia.
- Technical Documentation.
- Involves preparation of Hydraulic datasheet, prototype hill chart, cavitation guarantees, guaranteed technical particulars, Transient calculation report for customer.
- Preparation of risk sheet for internal approval from management board, technical write-up for turbine and valves.
5) Supporting Activities.
- Effective coordination with marketing and engineering teams.
- Providing interface details to generator engineering, BOPM and plant engineering on time for finalization of Power house layout.
- Providing technical clarifications to post bid queries raised by customer.
- Coordination with global small hydro product development center.
- Assisting marketing and sales towards timely preparation of budgetary proposals.
- Bid preparation activities.
- Organizing Design review meetings.
6) Carried out the above responsibilities on the following projects.
- PANNAN 4units 75MW, NAFRA 2units 60MW, BAJOLI HOLI 2units 60 MW, RONGNICHU 2units 48 MW etc.
Professional Experience at Kirloskar Brothers Ltd :-
Responsibilities :
- Involved in the selection and sizing of all vertical & horizontal type turbines up to range of 25 MW viz Francis, Pelton and Kaplan and predicting their Hydraulic performance using available model hill charts.
- Performed Hydraulic transient calculations
- Prepared Performance curves for various types of pumps.
- Prepared Operation and Maintenance manual for special purpose pump known as CANNED MOTOR PUMP which are used in nuclear applications.
- Performed surge calculations for pumps.
- Supported testing/inspection group in testing of pumps at Hydraulic test lab.
Masters Thesis :-
Synopsis :
“Experimental and numerical Investigations on differential pressure devices” carried at Fluid Power Laboratory of Mechanical Engg Department,
“Indian Institute of Technology”(IIT), Mumbai, INDIA.
Responsibilities :
- Studied literature available on Orifice meters and Conical flow meters.
- Prepared experimental test rig.
- Supported manufacturing group for manufacture of orifice meters and conical flow meters for different cone angles.
- Performed experiments for different cone angles by varying upstream and downstream disturbances.
- Reynolds number of the flow ranged from 1e5 to 5e5.Water was used as the working medium.
- Compared performance of orifice meter and conical flow meter by measuring coefficient of discharge, irrecoverable pressure drop, velocity profiles on the upstream and downstream.
- The experimental results were then compared with numerical results using the commercial software package “FLUENT”.
- The model was created and meshed in Gambit.
- Experimental results matched the Numerical results by ±5%.
Conferences/Technical talks :-
- Presented Technical paper on “Experimental and Numerical Investigations of Conical Flow meter in Comparison with orifice meter and Venturimeter”, at Proceedings of 33rd National and 3rd International Conference on Fluid Mechanics and Fluid Power held at I.I.T Bombay.
- Pavan Kumar, Lokesh Meena, U.S.Powle and S.V.Prabhu
Area of Interest :-
Energy conservation and management, Fluid machinery, Renewable energy, Thermal
Engineering.
Strengths :-
Punctual, Self confident, Hard Working and Positive attitude.

[valvivishal]

Name : Valvi Vishal Ganesh
Educational Qualifications :
- Bachlor in Mechanical Engineering from Mahatma Basueshwar Education Society’s College of Engineering, Ambejogai with 59.69% in 2010.
- Diploma in Mechanical Engineering from Government Polytechnic, Dhule with 60.00% in 2005.
- H.S.C from D.R. Jr. College, Nandurbar with 46.87% in 2002.
- S.S.C from S.A.Mission English Medium School, Nandurbar with 63.33% in 2000.
________________________________________
Computer Skills :
Operating System : Windows XP, Vista, Windows 7.
Software Explosure : Have completed a Integrated course in AUTOCAD 2006, UG NX7& PRO-E 5.0 from Indo-German Tool Room(IGTR), Aurangabad