www.endurancegroup.com Endurance Systems India Pvt Ltd Aurangabad : Validation esting Engineer R&D

[Admin]

Endurance Systems India Pvt Ltd
http://www.endurancegroup.com
endurancegroup.com

Designation: Engineer R&D 2Wh Validation Cell
Experience: 1 - 3 Years
Location: Aurangabad

Job Description
1. Ensure Timely calibaration and guage R&R studies for measuring equipment.
2. Upkeep of test machinery to prevent breakdowns.
3. Design and development of tooling for test equipment.
4. Implement Kaizens to enhance performance of test equipment.
5. Implement Kaizens to create test capacity by reducing testing cycle time.
6. Daliy monitoring of test equipment for timely start and completion of test.
7. Loading of test machines as per validation plan.
8. Assist validation in charge in post testing analysis.
9. Upkeep of vehicle test track.
10. Exp of 1-2 years in testing/QA/Product Instrumentation.

Desired Candidate Profile
Testing machine setup, Product measurements, continual improvement of test equipment & co-ordination with validation cell incharge/ Design Engineer.

Company Profile
ENDURANCE GROUP is one of the largest Auto Components manufacturer. We have 19 manufacturing facilities across India in 5 geographical locations. We also have overseas subsidiaries with plants located in Italy, Germany .The company has very ambitious plans for organic & inorganic growth.

ENDURANCE is a people focused organisation and therefore believes in providing its people with freedom to operate independently in their various work segments.

In view of substantial growth plans, Endurance Systems, a subsidiary of Endurance Technologies Pvt. Ltd, the flagship company of the group requires this position at its Aurangabad Plant

[Lendgule Mangesh Ram]

Hellow sir,i am Mangesh Lendgule.i am B.E(Mech.) appear but i have completed my autoCAD. can i get job on it?plz reply.

[NARENDRAKUMARBEHERA]

This narendra u have vacancy for testing (validation )opening plz send me that link

[Guest-IJT]

Carrer Objective: Intend to work with an organization where I can utilize my acquired mechanical engineering skills for organizational goals accomplishment and to prove myself as an asset for my organization.

Academics:
Qualification College/Board Yr of Passing Division
B.Tech (Mechanical) Raj Kumar Goel Institute Of Technology, Ghaziabad.
U.P Technical University, Lucknow
2009
1st

Diploma In Mechanical (Automobile) Govt. Polytechnic Lucknow.,
Board Of Technical Education, U.P 2005 1st

High School R.R.K Sr Sec School,Chandausi (U.P)
CBSE 2002 1st
Technical Certification:-
- Complete Course of AutoCAD from Cad Plus, Ghaziabad.
- Surfacing, 3-D Modeling, 2-D detailing, In CATIA V5R14 from CETPA INFOTECH Pvt. Ltd
Skills Profile:-
- Tool Design : Jigs, Welding fixtures, Checking fixtures, with
Simulation Creation
- CAD Tools : CATIA V5R14, Solidworks, AutoCAD 2000,
DELMIA V5R14
- Key Points : Designing,Surfacing,Detailing, DMU Kinematics

Job Experience:-
- Currently Working with LELOGIX DESIGN SOLUTIONS, Greater Noida since 4th June 2009 as a Design Engineer
Job Profile: Designing of various automotive Components on CATIAV5R14 also training students on Solidworks and CATIA.
- Campus Selected in L&T e-Engineering Solutions, Vadodara after Diploma, worked for 1 year (August 2005 to August 2006) as a Diploma Engineer Trainee.

Job Profile: Study the design standards and inputs supplied by the client , Develop the design plan for the components ,Conceptual Design of different Equipments for the Assembly line, Designing and modeling of 3D models and assembly of all parts, Defining kinematics mechanisms using DMU kinematics.

Cont... Page (2)
;; (2)::
Awards and Achievements:
- Designing Of Tractor Trolley on CATIAV5R14 with its Simulation in Final Year Project Of B.Tech.
- Awarded the Best project in the mechanical department in B.Tech.
- Designing Of Butterfly Valve In CATIA V5R14 With its Simulation At Cetpa Infotech Pvt Ltd, Greater Noida.
- Team member of runner up Volley ball team at college level.
Personal Profile:
- Date of birth : 6th July 1987
- Father’s Name : Mr. Sunil Gupta
- Mother’s Name : Mrs. Anita Gupta
- Height : 5’10”
- Permanent Address : House No. 123,Krishna Colony, New Tehsil
Bisauli (Badaun), U.P , 202520

Declaration: I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Date:
Place: Ghaziabad
(Honey Gupta)

[Guest]

CURRICULUM VITAE
KARANSINGH AMARSINGH RAJPUT
E-mail. karansingh_rajput AT ymail.com
Career Objective :
To secure a challenging position where I can effectively contribute my skills as Mechanical Professional, possessing competent Technical Skills
Examination
Discipline/
Specialization School/college Board/
University Year of Passing %
B.E.
Mechanical Engineering P.E.S. College of Engg, Aurangabad Dr. Babasaheb Ambedkar Marathwada University
Appering
2011
Intermediate
Science + Maths Stream Navodaya Vidyalaya, Kannad C.B.S.E.
2007 62.4%
S. S. C S.S.C Navodaya Vidyalaya, Kannad C.B.S.E. 2005 78.2%
Educational Qualifications :
Achievements :
- Participate in national level basket ball games held on 2005 in Jaipur.
- Participate in Tetron’09 A national level technical event, Quiz competition held on 2009 in MIT Aurangabad.
- Participate in Reflexes 2010 A national level technical symposium, brain teasers held on 2010 in P.E.S. college Aurangabad.
- Participate in Rotary youth festival in G.K. held on 2009 in Aurangabad.
Trainings / Certifications :
- Completed course of MS-CIT with 74 percentages.
- Completed level 1 examination conducted by C-DAC, GIST.
Computer skills :
- Software : Intro. Solid edge, CAD2009
- Platforms : Linux, Windows Vista, Windows XP, 2000.
Academic Project :
- Solar tracking by using hydraulic system.
Description :
In this project Solar panel is track with sun by using hydraulic piston cylinder mechanism instead of using stepper motor so that elimination of electrical, electronic circuits and so maximum amount of energy is stored in batteries and we can use for our dally purpose.

[Guest]

RESUME
Shaikh Mohd Altamash.
E-mail : shaikhaltamash1993 AT rediffmail.com
OBJECTIVE :

To update and utilize my skills and knowledge to conquer the challenges ahead of my organization, accomplish professional growth and financial stability.
EDUCATION QUALIFICATION :

Sr. no Qualification Year of passing Institution Result %age marks
1. S.S.C 2008 Sarosh high school. PASS 88.15%
2. Diploma in Mechanical engineering 2011 Government polytechnic Aurangabad PASS 74.08%
OTHER QUALIFICATION :

- Internet Training ,M S office, AutoCAD, Photoshop.

CO-CURRICULAR ACTIVITIES :

- Participated in drawing competition.
- Participated in essay writing.
STRENGTHS :

- Honesty
- Hardworking
- Grasping power
HOBBIES :
- Playing cricket

[Guest]

Sir bhagwan patil , i have complete B.tech mechanical , i have knowledge to software skill auto cad ,unigraphics.

[DHAGE]

RESUME
Dhage Vishal Prabhakar
vpdhage AT rediffmail.com

Objective

To join a designed organization that will recognize and utilize my skills fully and offer me a position requiring innovative and creative ideas where continuous growth and learning are way of life.
Academic Details

Exam Passed Year of Passing Board / University Institute Percentage

B.E.
T.E.
S.E.
F.E. 2011
2010
2009
2008 S.R.T.M.U.
Nanded Maharashtra College Of Engineering
79.62%
72.87%
76.13%
78.22%
HSC 2007 Latur Yeshwany Jr. College,Ahamadpur
76.00%
SSC 2005 Aurangabad Nutan Domreshwar Vidhyamandir
82.53%
Project Undertaken
“ Non-Conventional Cooling System”
Co-Curricular Activities
1.Participated at national leval paper presentation
2.Participated at regional leval poster presentation
3.Runner in college level quiz competion

[starjayesh]

Curriculum Vitae
________________________________________
Jayesh S. Kotecha
BE-Mechanical
kotecha_jayesh AT rediffmail.com
________________________________________
Career Objective :
To work with an organization, which will be progressively giving me an opportunity to sharpen my skills, for moving-up the growth curve of the organization and thus my career-
________________________________________
PROFESSIONAL CREDENTIALS
TATA MOTORS LIMITED
COMMERCIAL VEHICLE BUSINESS UNIT
Pimpri, Pune.
Designation – Technician Apprentice.
Divsion – Production Planning
Duration – July’07 to June’08.
Key Responsibility Area : -
- Timeline of the Projects.
- Check CAD Data Revision.
- Change Management & Project Planning Manual.
- Rectification in affected Dies.
________________________________________
ACADEMIC CREDENTIALS
Sr. No Name of Examination School / College Board / University Year of Passing Obtained Marks(%) Remark
1 B.E 8th Sem. J.D.I.E.T Ytl. S.G.B.A.U(M.S) Summer 2011 75.71 1st Class
2 B.E 7th Sem. ----do---- ----do---- Winter 2010 65.57 1st Class
3 B.E 6th Sem. ----do---- ----do---- Summer 2010 68.64 1st Class
4 B.E 5th Sem. ----do---- ----do---- Winter 2009 69.52 1st Class
5 B.E 4th Sem. ----do---- ----do---- Summer 2009 61.87 1st Class
6 B.E 3rd Sem. ----do---- ----do---- Winter 2008 62.56 1st Class
7 DME 3rd Year Govt. Poly. Ytl M.S.B.T.E Summer 2007 73.15 1st Class
8 DME 2nd Year ----do---- ----do---- Summer 2006 62.16 1st Class
9 DME 1st Year ----do---- ----do---- Summer 2005 74.25 1st Class
10 H.S.S.C Amolakchand College Ytl Amaravati Divisional Board Summer 2004 68.67 1st Class
11 S.S.C L.E.M.H.S Wani ----do---- Summer 2002 63.06 1st Class
________________________________________
PROJECTS & SEMINARS
- Final Year B.E Project on THERMAL MAPPING OF CAN TYPE COMBUSTION CHAMBER OF GAS TURBINE USING CFD.
- Final Year B.E Seminar on THERMAL MAPPING OF GAS TURBINE BLADES USING OPTICAL PYROMETER SYSTEM.
- Third Year B.E Project on WORKING MODEL OF CUPOLA FURNACE.
- Final Year DME Project on I.C ENGINE COMPRESSOR.
- Final Year DME Seminar on CYBORG ENGINEERING.
________________________________________
IT CREDENTIALS
- Pro-E Wildfire 5.0 (M.I.T CAD CAM CAE Training & Design Center ,Pune. )
- Catia V5 R17 (M.I.T CAD CAM CAE Training & Design Center ,Pune. )
- Gambit.
- Exposure to MS office. Windows 7/98/2000/XP.
________________________________________
OTHER CREDENTIALS
- Worked part-time in Bajoriya Construction Company Pvt. Ltd. Yavatmal for two years and ten months.
- Coordinated Two National Level Events QUAKE’09 & ROBONANCE’10.
- Participated in National Level Paper Presentation in TECHNOXTREME’09 at JDIET.
- Participated in National Level Fashion Show in SFILATA’10 at JDIET Yavatmal.
- Participated in Drama, Fancy Dress, Volleyball, Football, Cricket etc in ‘Euphoria’ (College Gathering) every year with some prizes.
- College Representative of LOKMAT YUVA MANCH in the Year 2006-07.
- Participated in Long Jump and being 2nd Runner for the consecutive years 2004-05 & 2005-06 in H Zonal Sports Meet.

[Guest]

CURRICULUM VITAE
KAUSHAL JANGDE
E-mail : kaushal_kj AT rediffmail.com
CAREER OBJECTIVE
Handle a challenging role in a fast growing organization. The job should provide a good potential growth and wide exposure to the latest technologies, fully utilizing my skills and abilities.
EXPERIENCE
Worked as Service Engineer in Alfa Tech India, Pune since Aprl2010 to Oct2010.
1. Interaction with customer
2. Onsite Installation and Monitering.
3. Onsite Troubleshooting
Present working in R&D,team as Embedded programmer since Nov2010 to till.
ACADEMIC QUALIFICATION
2009 Bachelor Of Engineering In Electronics And Telecommunication (E&TC) From NRI Institute Of Technology, Bhopal
Secured 67.91% (First Class)
2004 S.S.C From MadhyaPradesh State Board, Secured 88.87%
2002 H.S.C From Madhya Pradesh State Board, Secured 77%
TECHNICAL PROFICIENCY
Concepts Microcontrollers
S/W Language C, Embedded C,C++
Development Tools GCC compiler, Turbo C, Kiel, MS Office and MPLAB
PROJECT WORK DETAILS
B.E. (SEPT2008-FEB2009)
Project PC Telmetry & Manually Controlled Wireless Robotics JCB
Short Description : A PC Telmetry & Manually Controlled Wireless Robotics JCB is an automatic wireless car whose six directional matrices could be controlled by either PC Telemetry or Manually by wireless remote operator.
Project Street Light Controller
Short Description : It is used for automatically switched the Light ON&OFF depend on weather condition
EXTRA CURRICULAR
- WORKSHOP CONDUCTED
- Conducted And Organize 3-Days Workshop On “ROBOTICS” In Priyadarshani Institute Of Engineering And Technology.

- MAJOR TRAINING
- Major Training from WCR (west central railways) on communication and information technology.we came to know practically mean through which radio signal are transmitted for mobile communication.
- MINOR TRAINING
- Minor Training from Vardhman Taxtile During the course of training we were imparted with the technical operation of the Instrument department.
- SOCIAL SKILLS AND COMPETENCES
- Member Of College Cricket, Carom & Table-Tennis Team.
- Cultural Co-Head Of College Committee.
- HOBBIES
- Learning Musical Instrument, Sketching, Cooking, Writing.
AREA OF INTEREST
- Embedded System Design
- Hardware Interfac
STRENGTH
- Initiative
- Quick Learner
- Excellent working relationships and communication skills
- Enthusiastic Team player

[Guest]

related to job in endurance pvt. ltd in aurangabad

[Guest]

MOHD. RAZIK S. SHEIKH
E-Mail-id : <sheikhmohd.razik AT yahoo.in>
Career Objective :
To work in highly challenging environment that offers growth with opportunities to enrich my knowledge and skills.
Academic Qualification :
Specialization – Mechanical Engg.
BE Aggregate – 64.2%
Examination Institution Board/University Year of Percentage
passing
B.E ( 8th sem) G. H. Raisoni College of Engg.
Nagpur G.H.R.C.E. 2012 70.6%
Dip. in Engg. Govt. Polytechnic, Sakoli M.S.B.T.E. 2008 66.3%
HSC J.M. Patel Junior College,
Bhandara Nagpur 2005 54.6%
SSC B.L.N.M. Vidyalay, Bhandara Nagpur 2003 69.2%
Work Experience :
Training in TATA Motors, Pimpri, Pune as a Technician Apprentice.
Projects :
- “A Portable Pesticide Sprayer”. It is an effect to make a conventional pesticide sprayer along with increasing its efficiency.
- Project on “Line Following Robot” which follow the particular path for handling of materials.

Strengths :
- Ability to learn new things.
- Ability to work in a team.
- Has an positive attitude.
Personal Details :
Name Mohd. Razik S. Sheikh
Date of Birth 24Mar1988
Father’s Name Mohd. Saeed
Languages Known English, Hindi, Marathi & Urdu
Marital Status Single
Hobbies/Interests Listening soft music & Reading Holy books.
Declaration :
I hereby declare that the information given above is true to the best of my knowledge and belief and I shall abide by it.
MOHD. RAZIK SHEIKH