www.caepro.com Caepro Technologies Pvt Ltd Pune : CAE/CFD/FEA Analyst

[Admin]

Caepro Technologies Pvt Ltd

caepro.com
Designation: CAE/CFD Analyst
Experience: 1 - 6 Years
Location: Pune,
UK if required

Job Description
Solve a wide variety of engineering problems using advanced & industry-leading analysis tools & techniques, which include:
- Conceptual Design using modeling software
- Synthesis of Design
- Analysis using CAE/CFD tools

Desired Candidate Profile
Education: B.E/ M.E. Mech/ Prod/Auto Engg.
CAD: ProE/ Catia V4-V5/ Unigraphics/ Ideas
CAE: Nastran/ Abaqus/ Ansys/ Hypermesh/ LS-Dyna/ Pam-Crash/ Optistruct
CFD: Fluent/ ICEM/ Vectis/ Wave

Company Profile
Caepro is a UK based engineering services (CAD/CAE) company. It uses industry best practice techniques to deliver exceptional results to its clients who are leaders in the global automotive industry. It is looking for superior engineering talent to drive the expansion of its Technical Centre in Pune.

Email Address: careers@caepro.com, info@caepro.com
http://www.caepro.com

Keywords: CAE, CFD, Design, FEA, Engineering Design, Analysis, CAD, Ansys, CFX, Fluent, ICEM, Nastran, LS - Dyna, Abaqus, Hypermesh, Powertrain, Vehicle, Pam - crash, Catia, ProE

[tiwari]

Respected Sir / Mam

I am Ram kumar tiwari from Kanpur.I am herewith
furnishingmy detail resume for your kind perusal and consideration.
I would like to mentaion that i have appearing in M.B.A. (Operation) by online mode from
ICFAI University Tripura.
I have also complited my Diploma in Mech. Engg. & also Post Diploma in Plastics Mould
Design From CIPET Bhopal (m.p.)
If you give me a chance to serve in your esteemed organizationn , I ensure that i will leave
no stone unturned in discharging my duties to the utmost satis factory of all my superios.

Thanking You

Ram Kumar Tiwari
Kanpur U.P.
Mobile No.:- 09935418632,09696562327


CURRICULAM VITAE

CORRESPONDANCE ADD.
124/154, B – Block,
Govind Nagar,
Kanpur U.P. 208006
Mob. : -+919935418632
+919696562327
tiwari10279 AT engineer.com

TIWARI RAM KUMAR


OBJECTIVE
To be an element of the company having international repute and which can offer a fantastic career, multidimensional growth opportunity with exciting working environment.

KEY SKILLS

Quick Learner, Excellent leadership skills, Customer centric, Adaptable to drivers works environment.

WORKING EXPERIENCE

[LIST][*]Present time working in INJECTOPLAST PVT.LTD. Kanpur U.P. below 10 PPM company which is certified by QS 9000, TS 16949, & ISO14001 is a part of LOHIA GROUP in the field of plastic processing of a wide range of product, Mould Design & Developing, Manufacturing, Inspection, and Testing & Assembly (Since April 2006 to Till Date).[/LIST]

Responsibility
(a) Making RFQ & Bill of Material
(b) Drawing Development
(c) Plastic Mould Design
(d) Design and Development of Mould Component on Auto Cad
(e) Development of Mould and Tool Design Check List
(f) Operating knowledge of tool room m/c
(g) Supervision of M/C Work
(h) Documentation of file.
[LIST][*]Two year working experience as a Fabrication Supervisor in Mishra Engg. Gwalior M.P. (Since November 2003 to December 2005)[/LIST]
Responsibility
(a) 2d drawing making.
(b) Supervision of workshop.
(c) Documentations.
[LIST][*]One year and ten month work experience as a Auto Cad engineer in Shridivya Imaging Solution Bhopal M.P. (Which is worked for BHEL Bhopal) for design & Developing Auto cad drawing [/LIST]
(Since August 2001 to October 2003).

[LIST][*]One year and ten month work experience as a Tool room Supervisor in Ajit Chemical Pvt. Ltd. Kanpur U.P.(Which is worked for L.M.L., Indian Army, Indian Railways & Indian Airlines) for major plastic processing product & mould manufacturing[/LIST]
(Since October 1999 to July 2001)

QUALIFICATION

ACADEMIC:

High School from M.P. Board Bhopal M.P. in 1994 with First Division.

TECHANICAL:
[LIST][*]Diploma in Mechanical Engineering from M.P.B.T.E. Bhopal M.P. in 1998.[*]Post Diploma in Plastic Mould Design from Central Institute of Plastic Engineering & Technology (CIPET) Bhopal M.P. in 1999.[*]Appearing in M.B.A. (Operation) from ICFAI Hyderabad A.P. by Online Mode.[/LIST]

PROFFESIONAL:
1. Auto CAD 2000 & 2005
2. IDEAS 10NX & 11NX (basic)
3. SOLID EDGE (basic)
4. Catia (basic)
5. U.G. (basic)PERSONAL PROFILE
Father Name : Shri Shiv Kumar Tiwari
Date of Birth : February 10, 1979
Nationality : Indian
Marital Status : Married
Language Known : Hindi & English
Permanent Add : 124/322, B- Block, (Near Shri Muni School),
Govind Nagar Kanpur U.P. 208006
Contact No. : 0512-2659895, +919935418632
Passport No. : G5314690

DECELARATION
I hereby declare that above mentioned information made by me is true as best in my knowledge.

DATE: 16-07-09
PLACE: KANPUR TIWARI RAM KUMAR

[Guest]

PARAMBATHUVALAPPIL RAHUL MADHAVAN
p_rahul1187 AT yahoo.co.in

CAREER OBJECTIVES :
To build up a career in design/analysis (CAD/CAE), grow and mature as an asset to the organization and strive hard to achieve excellence for the company and myself.
SOFTWARE SKILLS :
AutoCAD, CATIA V5, HyperWorks - HyperMesh, Analysis using Radioss and Nastran as solvers, Microsoft Office & Microsoft Outlook
EDUCATIONAL DETAILS :
- BE Mechanical, 2008 - D.Y. Patil College of Engineering, Akurdi (Pune University) - 66.2%
- HSC, 2004 - Shri Mahalsakant Vidyalaya & Jr. College, Akurdi, Pune (Maharashtra State Board) – 75.5%
- SSC, 2002 - St. Ursula High School, Akurdi, Pune (Maharashtra State Board) – 79.46%
BE PROJECT :
Development of a 2-Cylinder, 4-valve, NA CRDI engine, in association with R&D team of FORCE MOTORS, Akurdi, Pune. The work involved deriving a 2cylinder version out of the Mercedes origin 4cylinder CRDI engine OM611, designing of parts, and adopting a common rail system from Delphi, proto building, testing and optimization.
PAPER PRESENTED :
ABS and ESP, an overview - Features, functioning and application of antilock braking system and electronic stability program for modern cars
LANGUAGES KNOWN :
English, Hindi, Marathi and Malayalam
SKILLS :
o Meshing using HyperMesh - 1D, 2D and 3D
o Static analysis, natural frequency (normal modes).
- Can work and co-ordinate effectively with team members from multiple departments.
- Analyze non conformances, find cause and help implement corrections and corrective actions.
- Knowledge of ISO 9001 :2008 quality system and ISO 14001:2004 Environment management system.
- Preparing process control charts/control plans.
- Knowledge of KAIZEN and 5S.
PROFESSIONAL EXPERIENCE :
Executive – Manufacturing
SIEMENS Ltd, Drive Technology Division (Traction Motors) "In-process Quality" department at Thane from Dec. 2008 to Jan. 2011
ACHIEVEMENTS :
1. Achieved all the targets (individual and division level) set by management for the financial year 2009-2010 at 200%.
2. Initiated and successfully completed the conversion of the hard format departmental Quality Management System documentation into easily accessible/retrievable online format.
3. Successfully reduced the percentage of open/pending interruption reports to less than 10% for the FY resulting in considerably lower downtimes and lower resulting losses.
AWARDS / RECOGNITION :
Received merit reward from Siemens I DT management for “Increasing the acceptability rate of GT46 rotors from 25% to 80%” by overcoming a serious quality issue and thereby helping the organization meet the product delivery schedule.
JOB RESPONSIBILITIES :
- Document non-conformances, report and coordinate with Siemens AG, Germany for specific quality issues/reports.
- Supervise 8x inspectors in shifts, train them and evaluate their performance.
- Prepare and update quality documents
- Ensure calibration of tools and instruments in shop.
- Conduct ISO 9001 : 2008 internal audits.
- Face both internal and external audits for ISO 9001 : 2008 and ISO 14001:2004.
- Prepare circulate and display monthly departmental quality MIS.
- Coordinate with vendors to resolve quality issues.
ADDITIONAL RESPONSIBILITIES :
Overhauling project of GT46 MAC (Diesel Electric Locomotive) motors :
Driving and coordinating all activities (manufacturing and quality) involved in the project.
PROJECTS UNDERTAKEN :
- Quality circle (QC) project for improving FPY of GT46 MAC (Diesel Electric Locomotive) motor winddings at all stages : Project in co-ordination with Traction motor winding dept, process planning and electric testing. Status of projects presented at monthly QC meetings.
- Rewinding of GT46 stator windings : Project in co-ordination with Siemens mobility division.
- Resin free Stator winding after Vacuum Pressure Impregnation before motor assembly.
CERTIFICATION/TRAINING :
1) Training program on Kaizen.
2) Two day training on ‘Poka Yoke Applications’ organized by CII at CII’s Godrej Naoroji Centre of Excellence, Vikhroli, Mumbai.
3) Bureau Veritas Internal Auditors training course for ISO 9001 : 2008.
4) Training on ‘Root Cause Analysis’
5) 8D for analysis of quality issues
6) Training program on ‘Behavioral Safety’
HOBBIES AND INTERESTS :
Reading, writing, sketching, listening to music, watching football, playing badminton, and chess.
Assuring best of my services to the organization,
P. Rahul Madhavan

[Guest]

Curriculum Vitae
KULKARNI SMITA JAYANT.
E-mail : smitak3110 AT yahoo.co.in
EDUCATIONAL CREDENTIALS
Sr. No. Examination Institute/University Year of passing Class % Marks obtained
1. B.E. Govt college of Engg.Karad June 2009 1st Class 61.64
2. H.S.C. Kolhapur Board Feb 2005 1st (disti.) 83.60
3. S.S.C. Kolhapur Board March 2003 1st (disti.) 75.83
BE PROJECT DETAILS :
Description : By using KOH solution purify the biogas so that it is operated in conventional I.C. engine and forms an alternating energy source for achieving the best efficiency towards saving fuel.
SEMINAR :
Vertical take-off and landing (VTOL).
TRAINING :
ASHTA LINERS PVT.LTD :
Duration 25 DAYS
Description : By using ‘SIX SIGMA’ technology avoid rejection of components under rejection analysis
COMPUTER PROFICIENCY :
Operating Systems : WINDOWS 98/2000/2007, XP, VISTA, SEVEN.
Microsoft Office Tools : Microsoft Office.
Well-known to designing software’s like AutoCAD 2011, Catia v5 R19, Pro-e Wildfire 5.0, Solid Edge, Hyper mesh, and Material Analysis (Ansys).
Scored 85% in MS-CIT exam taken by MSBTE in year 2005.
EXTRA CURRICULLAR ACTIVITIES :
- University level essay competition 1st prize
- Elementary Grade Drawing examination with ‘C’ grade
- Participant in national level paper presentation on Taguchi Method.
- Committee member of Tantrasangam-08 Magazine.
PERSONAL APPRAISAL :
- Good analytical skills and technical approach towards the problem
- Positive approach
- Flexibility.
SOFTWARE SKILLS :
Software Competency Level of skill
CATIA V5 R19 Part Modeling, Assembly, Surfacing, Sheet Metal, Drafting etc. Good knowledge in Part Modeling, Surfacing, Sheet Metal, Drafting, Assembly, etc.
PRO E WILDFIRE 5.0 Part Modeling, Assembly, Surfacing, Sheet Metal, Drafting etc. Good knowledge in Part Modeling, Surfacing, Sheet Metal, Drafting, Assembly, etc.
HYPERMESH V10 Shell meshing, Tetra meshing. Good knowledge of Shell meshing, Tetra meshing as per quality criteria.
ANSYS 11 Pursuing Pursuing
SOLIDEDGE Pursuing Pursuing
AutoCAD 2007 Drafting & Detailing Good knowledge in drafting

[Guest]

VIJAY SOPAN SAWANT
Email :sawantviju.2 AT gmail.com
Mechanical Engineering
OBJECTIVE
Develop professional career rapidly by giving the highest value to the reputed organization that I work for. Excel in the field of mechanical engineering. Lead / work as part of talented teams to set and achieve the goals of the esteemed company.
PROFILE
· A mechanical engineer with a fair knowledge of market developments. Hard working, self motivated and focused towards satisfying my company’s and its client / clients demands and hence indirectly my goals.
· Effective analytical ability, augmenting a highly creative and expressive mind.
§ Efficient and confident while working both individually as well as a team. Adjustable to new environments and technologies with a self motivated urge to apply learning’s to bear innovative solutions.
§ A positive attitude to bring out the best within available resources through good communication skills.
§ Multilingual in Marathi, Hindi, English
EDUCATIONAL AND PROFESSIONAL QUALIFICATIONS
Currently pursuing M.TECH (MECHANICAL ENGINEERING). Specialization THERMAL, 2009
College of Engineering Pune, (COEP), an Autonomous Institute under Government of Maharashtra
Secured 7.9 CGPA (Distinction)
Few courses covered in F Y M Tech.
Computational Fluid Dynamics , Advance Fluid Mechanics
Advanced Heat Transfer , Refrigeration & Air conditioning

B.E. (MECHANICAL ENGINEERING), 2008
PDEA’S, College Of Engineering, University Of Pune
Secured 70.93% marks – Distinction
HSC, 2004
R R Shinde Junior College (Maharashtra Board)
Secured 67.5% marks (78% in Phy.-Chem.-Math) – 1st class
SSC, 2002
Sadhana vidyalaya pune (Maharashtra Board)
Secured 73.33% marks – 1st class
PROJECTS / SEMINARS AS PART OF CURRICULUM
Project :
Title : “Hydraulic stamping m/c with modified power pack”
Company : S P movers & hydraulics, Pune.
Description : The project involves a hydraulic stamping machine which is used for stamping letter & number as well punching purpose of steel & other plate This project include
1) Design of hydraulic ckt. &cylinder as per requirement of machine.
2) Selection of pump, valve, motor.
M-tech Seminar Presented :
1. Study of different turbulence modeling
a. Large eddy simulation
b. Direct numerical simulation
c. RANS based model
1 year M-tech Project Work :
Title- :” analysis of flat plate heat sink configuration under jet impingement using Computational Technique”
Description :
Application of air jet impingement
1. Cooling of heated component in gas turbine engine
2. Drying of textile and paper product
3. Deicing of air craft system
4. Tempering of glass plate
1. The project involve Enhancement of heat transfer in electronic devices with use of impinging multijet air impingement on flat plate and pin fin heat sink.
2. Study of different Turbulence model for impinging jet flow and heat transfer
3. Analysis of flow and heat transfer characteristics of circular multijet air jet vertically impinging on flat plate heat sink numerically analyzed base on CFD commercial code ANSYS ICEM-CFD and ANSYS CFX12.0
4. Thermal performance is compared with Thermal parameter like average nusselts number (Nu), Average base temperature of heat sink, Reynolds numbers (Re) and heat transfer coefficient.
PROFESSIONAL EXPERIENCE
SHREE PRECOATED STEEL LTD.PUNE 1 year (2008-09)
PRODUCTION ENGINEER
Working in production based company having a role of trainee production engineering.
Past Job Profile : Looking after and providing planning for the whole day. Job responsibilities involve production planning, maintenance of the line, man power handling, and handling product after processing. Basically I was working with continuous galvanizing line(CGL) providing galvanized material to dispatch as well color coating line. We have communication with cold rolling mill &color coating line, planning dept. other finishing line. Raw material is from ISPAT; ESSAR STEEL which is being processed through three cold rolling mill is then galvanized &coated with color. we are providing best corrosion resistance material. Product are sales to spread all around India as well as its neighboring nations viz. Bangladesh, Sri- Lanka . 80% of the products are dispatch to foreign countries & many other seaports.
Additional Qualifications :
· Obtained a score of 89 Percentile in GATE Exam (Mechanical) conducted in 2009
· Completed Windows XP, Windows 2000, Windows 98, C language.
· Certificate course in ICEM CFD & ANSYS FLUENT software,ANSYS CFX
· PROE WILDFIRE 4 and AUTOCAD
EXTRA CURRICULAR ACTIVITIES :
§ Member of organizing committee of 36th National conference on Fluid Mechanics and Fluid Power held at COEP.
§ Participate in marathon.
§ Participated in “Inter College gathering Competition” and various other, related activities.

[Guest]

abhijit sutar
M.E.MECHANICAL

[Guest]

Respected sir,
I Ms .Minal A. Dakre have completed B.Tech.(Chemical) . I have pursued Diploma in Software Testing’ am waiting to join your teamwork if there is any vacancy. I am attaching my curriculum vitae for your review. I am confident; my skills would be an asset to your company. Grant me the opportunity to join your organization.
Thank you for your consideration, I sincerely look forward to hearing from you to arrange an interview.
Curriculum Vitae
Minal Dakre
Email Id :minal.dakre AT gmail.com

Objective :
To deliver my potential in such a way that everyone should recognize me due to my work and to utilize my knowledge and skills so that I can perform my best.
Basic Qualification :
A Fresh engineering graduate in Chemical Engineering (2011 Pass out) from J.D.I.E.T. (Affiliated to Amravati University) with 62.62%.
Educational Qualification :
Degree/Exam College/School University/Board Year Percentage
B. E. (CHEM) J.D.I.E.T., Yavatmal S.G.B Amravati University 2005-11 62.62%
H.S.C. Govt Jr.college, Yavatmal. Maharashtra State Board 2004-05 72.00%
S.S.C RLV High School, Yavatmal. Maharashtra State Board 2002-03 65.73%
Computer Skills :
Software Courses Diploma in Software Testing From SEED Infotech, Pune.
Tools Quick Test Professional(QTP), Bugzzila, Mercury Quality Center (MQC), Test Link
Methodology Manual Testing, Automation Testing, Software Development Life Cycle(SDLC), Software Testing Life Cycle(STLC)
Programming Language Introductory knowledge of C
Project :
Project Title Orange HRM 2.5
Detail Worked on manual testing for Orange HRM 2.5 Application. Orange HRM 2.5 is a web based application. My responsibilities include study and analysis of application requirements, preparation of test plan, test cases, test data collection, test execution and publishing test results and reports
Role Software Tester
Module allotted Work Experience, Deposit, Report to.
Platform Windows XP, Internet Explorer 6.0
Seminar :
Utilization of waste polymers for flexible pavement and easy disposal of waste polymers.
ACADEMIC PROJECTS DETAILS :
Final Year Project(VIII Semester)
Project Name : Revamping, Modification and Development in Coating of paper by Biodegradable Polymer.

Team Size : 6
Duration : 8 Months
Description : Presently paper is coated /laminated with polymer like HDPE/PP. Purpose is to acquire extra strength required for different applications of paper. Limitation with this type of coating is that it is not biodegradable, hence not disposable. So it is harmful to environment and more ever unless and until paper is made coating free, it can’t be recycled in paper industry.
Above findings set an objective to search for such a eco-friendly polymer which;
1) Gives all required properties.
2) Is water soluble.
3) Is biodegradable.
4) Is less expensive.
Extra Curricular Activities :
- Winner of State level paper Presentation in“ROBONANCE-08” under the topic . “Hydrogen Fuel cell” held at J.D I.E.T., Yavatmal.
- Winner of National level Paper Presentation in “NCOAT-NIRMITI-09” under the topic “FUEL FROM PLASTIC WASTE” held at P.I.E.T., Nagpur.
- Winner of National level Paper Presentation in”ROBONANCE-09”under the topic
“ALGEAL OIL “held at J.D.I.E.T., Yavatmal.
- Worked as team member in organizing committee in J.D.I.E.T.Fest 2009-2010.
- Represented the Institute in the” Volley ball Inter College Tournament” in the session 2009-2010.
- Organizing committee member in organization of national level competitions at J.D.I.E.T. Yavatmal held on 27& 28 February 2009.
- As a co-ordinator for Chemical Engg. Department. In “TECHNO X-TREAM-09” a national level technical symposium in J.D.I.E.T. Yavatmal.
- As an active member in”NATIONAL SERVICE SCHEME” in J.D.I.E.T. Yavatmal.
- Worked as Chief-Editor of Departmental Magzine. (Scavenger).

[Guest]

KARUN UDDHAVRAO GARAD
Email ID : karun26 AT gmail.com
OBJECTIVE
- Obtain a position as a team-player in a people-oriented organization where I can maximize my Industrial experience in a challenging environment to achieve the goals of my company.

EDUCATION
Program Institution %/CGPA Year of completion
M.Tech (Aerospace) IIT Madras 7.76 2012
SCHOLASTIC ACHIEVEMENTS
- Secured AIR 73 in GATE 2009 (Aerospace Engineering).
- Cleared coveted Combined Defense Services Examination in 2009
M.TECH PROJECT
Title : ‘High Enthalpy Flow Mixing’ Guide : Dr. S R Chakravarthy
Brief Description : (1 year)
- Computational Project to determine the feasibility of experiment. Simulations to be carried out by using software package “GAMBIT-FLUENT”.
- A high temperature, low pressure plasma is diluted with a high pressure low temperature flow and re-entry conditions are created on the model.
- Supersonic mixing should be such that it will increase the pressure of the mixed stream without causing too much loss of temperature.
- Total heat flux, Temperature variation, Mach number contours, Pressure profile around the model is to be simulated
COURSE WORK
- Advanced Heat & Mass Transfer
- Combustion & Flow Diagnostics
- Numerical Solutions of Partial Differential Equations
- Aircraft & Aerospace Structures
- Fundamentals Of CFD
- Air Breathing Engines
- Finite Element Analysis
- Aerodynamics of Missiles & Launch Vehicles

LABS
- Aerodynamics
- Structures
MINI PROJECTS & ASSIGNMENTS
- Image Processing to find out evaporation rate of acetone (2 months)
- Build up an experimental setup.
- Processed Images obtained from experiment to find out evaporation rate at different intervals.
- Relation between surface area & evaporation rate at room temperature found out.
- Aerodynamic & Structural Design of a model RC aircraft. (1 year)
- Small model aircraft to be designed for Trafic Monitoring & Surveillance purpose by a group of 6 members.
- Designed the aerodynamic characteristics of the aircraft according to mission requirements.
- Handled the manufacturing of the aircraft based on design parameters.
POSITIONS OF RESPONSIBILITY
- Placement Representative of IIT Madras (1 year)
- Created a Placement group with Aerospace department batchmates for focusing on soft skills, computer proficiency, conceptual questions etc. required for getting placed in a good company.
- Arranged fundaes session by Senior students working in different companies to help students prepare for the different
- Conducted mock group discussions, personal Interviews for the students under the guidance of Sponsored candidates from Reputed Organizations like ISRO, DRDO, Indian Navy.
- Co-ordinator of PG Hostel for General Counselling Unit. (1 year)
- Guided Fresher students during initial days of stay at Hostel
- Provided information about institute through pamphlets.
- Spread awareness about the facilities provided by the Institute through Google Groups.
SKILLS
Computer :
- Proficient in handling Software packages like Matlab, Fluent
- Good understanding of programming languages C & C++.
Soft Skills :
- Exceptional listener and communicator with good verbal and personal communication skills.
- Dependable, responsible contributor committed to excellence and success.
- Resourceful team player who excels at building trusting relationships with colleagues.
CO-CURRICULAR ACTIVITIES
- Won fourth place in GeneraL Knowledge competition held by Haridayal Organisation.
EXTRA-CURRICULAR ACTIVITIES
- Won a Bronze medal in National Level Budokon Karate Championship in 2001
MISCELLANEOUS
- Worked in Bay Area Credit Services as an agent for 2 months.

[Guest]

RESUME
Objective : To excel in my area of activity by taking up challenging assignments, hone skills by maintaining a learning attitude and contribute to the organizational development with personal growth.
Salunkhe Rahul Hanmant
E-mail ID : rahulsalunkheme AT yahoo.in
Academic Details :
Examination passed School/college/
Institute Board Month & Year of passing % Marks
S.S.C. SRVM Nagthane. Kolhapur
Board March-1999 82.53
H.S.C.
YCIS Satara. Kolhapur
Board March-2001 64.67
Diploma Govt. Poly. Karad. MSBTE May-2004 66.01
Bachelor of Engineering in Mechanical Engg.
Institute : KBP College of Engg. & Poly. Satara
University : Shivaji University, Kolhapur.
Examination passed Month & Year of passing % Marks (aggregate)
SE (Mech.) May-2007 62.36
TE (Mech.) May-2008 63.38
BE (Mech.) May-2009 66.42
Elective Subjects for B.E. : Operation research, Robotics, Cryogenics, TQM
Master of Engineering in Mechanical (Heat Power Engg.)
Institute : Government College of Engineering, Karad
University : Shivaji University, Kolhapur.
Examination Month & Year of passing % Marks
ME(Mech.) – HPE-I Viva awaiting 70.90
GATE Qualification
Year Score (out of 1000) Score (Percentile)
2008 288 81.55
2009 370 89.04
2010 394 91.51
- Computer Proficiency :
1. FLUENT/CFX/GAMBIT
- Project & Seminar :
- Projects : 1. ‘Design & Mfg. of Noodles making M/C’ (Year-2004)
2. ‘Design & Mfg. of Gear box for Automatic Lathe’ (Year-2009)
3. ‘Numerical simulation of falling film dynamics on horizontal tubes’ (ME Dissertation)
- Seminars : 1.‘Automatic Transmission System’ (Year-2009)
2.‘Variable Compression Ratio Engine’ (Year 2009)
3.‘Lattice Boltzmann Method for Fluid Flows’ (Year 2010)
Work Experience :
Name of Organization Responsibility Period
L& T JOHN – DEERE Equipments Pvt. Ltd. Pune Trainee Engineer
Engine Production Shop 29 July 2004-
28 July 2006

[Unregistered]

Sushilkumar M. Jogdankar
Sr. CFD Engineer
Email : suvai79 AT gmail.com

SUMMARY :
I am a highly qualified, CFD (Computational Fluid Dynamics) Sr. CFD Engineer who is seeking a challenging position in industry. I have total of 8 years of experience, in it 6 years of experience in meshing, modeling and simulation of progressive heat transfer, fluid dynamics, multiphase flow model, and CFD experience within esteemed academic and industrial organizations such as Mechwell Industries Ltd, Nasik, S M Auto Engg Pvt Ltd, Pimpri, Pune, Bajaj Tools Engg, Bhosari pune, Govt college of Engineering karad, AIISSMS COE, PUNE, Defence Institute of Advanced Technology.
Coupled with my strong technical, analytical, communication and organization skills, I am a driven professional who will quickly prove to be a true asset to my new organization.
My aspirations for career development are to apply my skills and expertise within a successful and forward thinking organization. I look forward to discussing a suitable opportunity with you in the near future.

TECHNICAL SKILLS :
Skill Level Experience Last used
Gambit,
Fluent6.3.26,
Ansys Workbench-13, 14.5
Ansys ICEM-13,14.5
Ansys CFX-13, 14.5 Expert 6 years Currently in use
AutoCAD 2010 Expert 8+ years Currently in use
MS Office 2003, 2007, 2010 Advanced 8+ years Currently in use

EDUCATION :
Master’s Degree in Mechanical Engineering (2005-2006)
Government College of Engineering, Karad
Research project : Experimental Investigation of Local Heat Transfer Characteristics and Numerical Simulation from Impinging Jets to Concave Surface” sponsored by Defense Institute of Advanced Technology, Girinagar, and Pune
Bachelor’s Degree in Mechanical Engineering (2001-2002)
All India Shri Shivaji Memorial Society College of Engineering, Pune
Research project : Design and Manufacturing of Jig and Fixture” sponsored by Phavi Engineers, Bhosari, and Pune

EXPEREINCE :
Sr. CFD Engineer
Mechwell Industries Ltd, Nasik (Dec 2006 – Present)
Responsibilities : CFD activities for Mahir Cement Industries, Chittinad Cement Industries, manikgrah Cement Industries, Clair Engineers, IB Thermal Industries, JSW Industries, Wonakbori unit7, VT Corp, Combustion Burner Ltd, Sagar Cement Industries ltd, Orissa Cement Ltd by using CFD related software packages like FLUENT, Ansys workbench, Ansys ICHEM and Ansys CFX, so as to conduct fluid flow related performance evaluation with respect to pressure drop reduction , temperature drop, efficiency of the unit and with design optimization of a wide variety of the Ducts, Cyclone, coal mill, ESP, Screens over boiler tubes, analysis, etc. Also R & D work has been carried out on oil water and gas separation, solar cavity receiver, Data Center for optimizing hot spot air flow distribution through CAC, optimization of bubble remover body, particle tracking with heat transfer from gas to solid particles, thermal comfortness of human inside the room by using HVAC concepts. Liaised with all team members at appropriate intervals, and prepared the final technical report, within the time.
Development Engineer
S M Auto Engineering Pvt Ltd, Pune (Jun 2006 – Nov 2006)
Responsibilities : Supported work on Heat Treatment Efficiency prediction and improvement of radiator and for performance testing analysis of radiator by wind tunnel.
Designed the wind tunnel for radiator performance testing analysis and monitored heat treatment processes using data Acquisition Systems with Bench link tool.
Designed the radiator by heat treatment calculation point of view.
Assistant lecturer
Government College of Engineering, Karad (Aug 04 – May 06)

Responsibilities :
Taught subjects like Engineering Graphics, Thermodynamics, Theory of Machine, Basic Mechanical Engineering etc
Handled the laborites like Refrigeration and Air conditioning, Engineering Graphics, etc
Helped professors for working in ISO structure
Helped professors for handling projects of UG students
CFD Projects Handelled in Mechwell industries limited

R & D Project Work :
1. Practical Set for Silencer.
2. Screens over Boiler tubes simulation.
3. Coal Mill Analysis by CFD, to get the improvement in collection efficiency for different particle size with different mass flow rate.
4. Data Center simulation for hot spot detection, uniform flow distribution, To maximizing the performance in the data center by FLUENT.
5. Solar cavity receiver and concentrator design.
6. Hydro cyclone Design for solid separation.
7. Designing and simulating for Cyclones with connecting ducts with respect to pressure drop reduction, temperature drop reduction and collection efficiency improvement.
8. Multiphase analysis simulation for oil water gas separator tank.
9. Radiant Cooling panel Design for HVAC.
10. Oil water and Gas separation simulation.
11. Multi utility Heat pump calculation.
12. Optimization of bubble remover body by using DPM, VOF model.
13. Simulation for heat transfer from gas to solid particles by using DPM model.
14. Simulation for cement plant rotary kiln burner pipe Castable life improvement.
15. Heat Treatment Efficiency prediction and improvement of radiator and for performance testing analysis of radiator by wind tunnel. (worked in S M Auto Engineering Pvt Ltd, Pune)

Industrial Project Work :
1. Cyclone Design simulation, Fertiplant industries ltd.
2. Pressure Drop Reduction and uniform flow distribution of ESP DUCT, for Clair Engineers, Century cement industries ltd, JSW industries Ltd, VT Corp Pvt, Ltd.
3. Pressure Drop Reduction and uniform flow distribution of duct, for IB Thermal Power plant, Wonakbori cement industries ltd., Combustion burner Ltd.
4. Pressure Drop Reduction and uniform flow distribution of duct in between cyclone, for Maihar Cement industries ltd.
5. Pressure Drop Reduction and uniform flow distribution of Cyclone with down comer, for Maihar Cement industries ltd, Chittinad Cement industries ltd.
6. Data Center simulation for hot spot detection, uniform flow distribution, to maximizing the performance in the data center, SIOUX Pvt Ltd.
7. Pressure Drop Reduction with uniform flow distribution in cyclone connecting duct, along with heat transfer from gas to solid particle for Sagar Cement industries ltd, Orissa Cement Ltd, Chittinad Cement Co-operation Ltd
8. Simulation for cement plant rotary kiln burner pipe Castable life improvement, Orissa Cement Ltd


ACADEMIC AND PROFFESSIONAL ACHIEVMENTS :
National Conferences :
1. Jogdankar, S.,M., Pise A., T., Misal R.D., Pawar A., K., 2007 ' Heat Transfer in Jet Cooling system on Concave Surface With different Configurations”, Proceedings of National Conference on Fluid & Electrical Advances in Manufacturing & Technology Management-2007 (ICAMTM 2007), January 18-20, 2007, pp

International Conference :
1. Jogdankar, S.,M., Pise A., T., Misal R.D., 2011 ‘Numerical Simulation of Heat Transfer in Jet Cooling System on Concave Surface’, Proceedings on International Conference on “Thermal Energy and Environment (INCOTEE 2011), held at Kalasalingam Academy of Research and Education. Krishnankoil, Tamilnadu, India.

Conference Attended :
1. “Cooling Detectors and Microscopic Coolers Chill to Millikelvin Temperature – A precision Temperature Control Cooling Technology” in Pandharpur National Conference.
Scored 1st rank in Running Track of 400 meter & 200 meter during school level.
Gate Score of 75.28 Percentile in the Year 2003.

PERSONAL DETAILS :
Date of Birth : 28th Aug 1979
Tel. No. : (0217) 2391862
Nationality : Indian
Fluency : English, Hindi, & Marathi
Marital Status : Single
Gender : Male

Declaration : I here by declare that the above information is true to the best of my knowledge & belief.

Date : Yours Faithfully
Place : Nasik Sushilkumar M.
Jogdankar