Welding Inspector / Mechanical Inspector : Dubai UAE Disha International

[Admin]

Disha International

Keywords: Oil, Gas, Welding, Petrochemical, Inspection, CSWIP, AWS, Mechanical,

Designation: Welding / Mechanical Inspector
Experience: 5 - 10 Years
Location: Dubai/ UAE
Education: UG - Any Graduate - Any Specialization,Graduation Not Required
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Site Engg., Project Management
Posted Date: 21 Nov 2008

Job Description
A bachelor’s degree in mechanical engineering or equivalent. Excellent Knowledge of Inspection techniques in Oil & Gas Industrial sector. Mandatory to hold certification in welding:CSWIP 3.1/3.2 or AWS Certified Welding Inspector.

Desired Candidate Profile
5 + years experience in Oil, Gas and Petrochemical Industry. Thorough Knowledge of codes such as: ANSI B 31.3, 31.4 and 31.8, ASME Section V and IX, API 620, AWS D1.1
Essential to hold certification for ASTN Level II (VT, MT, RT or UT)

Company Profile
Disha International established in 2001 today it is a fast upcoming placement cell '' expertise in offering professional and experienced services to meet all organizations placement needs.

Executive Name: Mr. Nikhil Sharma

Address:
Disha International
2,SAMRAT BLDG,,
M V ROAD,ANDHERI(E)
MUMBAI-400069
Mumbai,MAHARASHTRA,INDIA 400069

Email Address: disha_int29@hotmail.com

Telephone: 91-022-26848881

[Guest-IJT]

Arularasan.R
-------------------------------------------------------
The submitted value of field named "Email :" is:
-------------------------------------------------------
arasan42914 AT yahoo.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
-------------------------------------------------------
Qc Inspector
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
Arularasan.R
To secure a position as a QA/QC Inspector with a reputed institution offering challenging assignments by providing career development opportunities and enhancement in professional expertise as well as rewarding monetary benefits.
- Diploma in Mechanical Engineering.(Mar-1991)
- Diploma in Industrial Safety.
- American welding Society Certified Welding Inspector. (AWS CWI-08082451)
- ASNT Level 11 certified in MPT, LPT, RT, UT & VT .
- ADCO Approved QC Inspector(AbuDhabi Company for onshore oil operations)
- QC inspector (Piping &welding), , Matrix Construction,
Duration : July-2010 to till date
Project : Construction works for NEB Tie Ins and cluster modificat ion of Al-Dabbiya, Rumaitha and Shanayel Fields.
Contractor : Matrix Construction
Company : Abu Dhabi Company for Onshore Oil Operations (ADCO
Responsibilities :
- Verification of Drawings
- Checking of Project specifications and following various codes such as ASME B31.3, 31.4, 31.8, section ix, API 1104.
- Material Receiving Inspection including verification of colour coding, physical condition, drawing requirements and material traceability
- Preparation and Qualification of WPS,PQR ,WPQR and Performance Qualification for Coating as per ASME sec IX,AWS D1.1&NACE
- Preparation of ITPs and QCPs of piping welding, steel structure and painting
- Coordinating with client (ADCO)inspectors
- Preparation of welder continuity records, performance records.
- Checking joint preparation, consumables and preheat requirements.
- Checking calibration report of welding machine ,baking &holding ovens ,tong testers &thermometers
- Checking consumables for size, specification, condition, issuance and storage.
- Final weld visual inspection
- Coating Inspection
- Updating of database(M S Access) for daily welding reports, NDT reports, Coating Reports
- Witnessing NDT methods such as MPI, LPI and UT.
- Reviewing radiographic films.
- Preparation of test packs and project dossiers.
- Witnessing Hydrostatic testing and Pneumatic testing.
- Training &Qualifying personnel’s for flange tightening &torqueing
- Coordinating quality control functions as well as inspections with sub contractors
- Preparation of corrective action request, non conformance report and technical queries and follow up.
- Verification of document and turn over.
- QC inspector (Piping &welding), Dodsal Engineering L.L.C. OMAN.
Duration : Oct-2008 to Dec-2009
Project : Qarn Alam Steam project,Qarn Alam,OMAN
Contractor : M/S Dodsal Engineering & Consruction L.L.C .OMAN
Client : PDO(Petroleum development of Oman).
- QC inspector (Piping &welding), Galfar Engineering S.A.O.G (OMAN)
Duration : May-2006 to June-2008
Project : Consruction of kauther Gas plant Associated with field gathering station
Contractor : Galfar Engineering & Contracting S.A.O.G (OMAN)
Client : PDO
Company : Petroleum Development of Oman.
Responsibilities :
- Preparation of WPS in accordance to Project Specification and ASME IX.
- Witnessing Procedure Qualification Tests and Welders Performance Qualification Tests.
- Reviewing PQR and Welders Qualification Test Records.
- WPS Specification in Isometric Drawings in accordance to materials, thickness and NDE Requirements.
- Inspection and verification of welding consumables and their certificates.
- Monitoring of welding consumables storage, handling and issuance.
- Verification of calibration for welding machines, welding measuring devices, electrode holding and baking ovens, portable ovens etc.
- Ensuring implementation of QC Procedures and Inspection & Test Plan in the Project.
- Controlled and coordinated all fabrication, repair and documentation activities in fabrication shop in accordance to project requirements and to meet production
- Pre-welding, in-process and post welding visual inspections
- Final mechanical inspection of installed piping such as 1) Review of test pack preparations. 2) Pretest punch listing. 3) Review of weld summary reports. 4) Release for pressure testing.
- Witnessing of Pressure /Pneumatic Testing.
- QA/QC inspector (Piping& Welding), . S.R. Engineering Contractor
Duration : July-2004 to April-2006
Contractor : S.R. Engineering Contractor Pudukottai.
Client : Bharath Heavy Electric Limited Trichy.
Responsibilities :
- Material inspection : Inspection for the incoming materials such as pipe, plate, flange, fittings valves, gasket, fasteners, structural items, electrodes, filler wire etc... Checking the identification mark correlation with test certificates, dimensions, quantity, damages and also make the check test specimen and witness the test
- Pre-installation inspection including material heat number traceability.
- Verification of welder certifications, calibration of welding machines ovens and NDE personnel qualifications
- Inspection and verifications of welding consumables their storage, certificates, handling and issuance.
- Pre-welding, in-process and post welding visual inspections.
- Pre-heating and PWHT inspection.
- Controlling and coordinating NDE processes and repair activities.
- QA/QC Inspector (Welding &Piping), L&T Larson Toubro Ltd Chennai. (India)
Duration : Janu-2002 to Mar-2004
Project : Kudankulam Nuclear power plant,(Tamilnadu) India.
Contractor :L&T Larson Toubro Ltd Chennai. (India)
Responsibilities
- Surveillance on day to day erection activities including material check and visual inspection for pipes, elbows, valves and supports, check on consumables, fit up and alignment inspection, preheating and post heating.
- Stage wise fabrication inspection of piping.
- Pre, In Process and Post weld visual inspection to assure the compliance with relevant codes and standards
- Witnessing of Welder Qualifications tests
- Verifications of welder approval according to the project requirements.
- Controlling and coordinating NDE processes and repair activities.
- Maintain and compile project records according to the ITP.
- Familiar with various ASME and API codes
- Effective Implementation of Quality Management System, Quality Procedures, Inspection and test plan.
- Interpretation of Drawings.
- Preparation of WPS for various types of materials.
- Mechanical Engineer, M/S Hema Engineering,
Duration: May- 1993 to Jan-2002
Project: Construction Of India Cements & Arooran sugars Ltd,
Client: :L&T Larson Toubro Ltd Chennai. (India)
Contractor: M/S Hema Engineering pennadam, (Tamil nadu)

Date:
Place: Arularasan.R
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4119721
Date & Time : 11th May 2011 4:39 PM (UTC)
IP Address : 195.229.235.38
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; eSobiSubscriber 2.0.4.16; MAAR)
Predicted Country : United Arab Emirates

[Guest]

SHAJI G
e-mail : gshaji AT hotmail.com
CAREER OBJECTIVES :-
To secure a challenging job enthusiast in the field of Non-Destructive Testing and in a progressive. Growth Oriented organization where in my skill and abilities are best utilized for the benefit of the organization.
EDUCATIONAL QULIFICATION :-
- Electronics & Communication Engineering with from Modern Group of Industrial Training Centre, Kollam, ( 2000-2002)
- Hindi Pradhama, Dhusari, Rashtra Bhasha, Pravesh, Bhushan. With from Kerala Hindi Prachara Sabha, Trivandrum
- Pre-Degree with from Kerala University ( 1998 )
- SSLC with from Govt.High School.Kavalayoor, Varkala.( 1996 )
TECHNICAL SKILLS :-
Having certified as ASNT Level II personal in Non-Destrucive Testing in following Methods
- Asper SNT-TC-1A
- Radiography Testing
- Ultrasonic Testing
- Magnetic Particle Inspection
- Dye Penetrant Testing
COMPUTER KNOWLEDGE :-
- Diploma in Hardware Engineering
- Diploma in Computer Networking
- Diploma in MS-Office
- Operating System Installation (Win 98,Windows2000,WindowsXP and Windows Vista
PROFESSIONAL WORK EXPERIENCE :-
Company : VAIGAY CONSULTANTS, Srirangam, Trichy, Tamil Nadu.
Position : Multi NDT Technician
Period : June 2007 to till date
Company : Industrial Quality Services, Thuvakkudi, Trichy, Tamil Nadu.
Position : RT Technician
Period : December 2006 to April 2007
Company : Source of NDT, Kakkanadu, Kochi, Kerala
Position : NDT Technician
Period : September 2006 to October 2006
Company : Universal X-Ray Co., Kochi, Kerala.
Position : Darkroom Technician
Period : May 2006 to August 2006
JOB RESPONSIBLITIES :-
- Technical discussions with clients regarding all aspects of welding and NDT.
- Various type of Ultrasonic inspection with Krautkramer USM 25,USM 35X DAC, P-x10,EEC,EX10 and Panametrics Model 26DL
- Inspection of various kinds of job with MPT and PT
- Familiar in Radiography Testing of Tanks, Vessels, Weld joints of pipes using by Gamma ray ( Gamma mat, Tech/ops Delta,660,880 and Gamma red.)
- Radiography Inspection for low dia pipes (below 2”) for wall thickness measurements and corrosion monitoring
- Ultrasonic Testing and Magnetic Particle Inspections on structural jobs as per specifications.
LANGUAGES KNOWN :-
- English
- Hindi
- Malayalam
- Tamil

[Guest]

RESUME
N. SATHAM HUSSAIN
Email id : satham786 AT gmail.com
CAREER OBJECTIVE :
To work in a meaningful and challenging position that enables me to develop myself as a professional and permits scope for advancement.
QUALIFICATIONS :
Academic Qualification :
Examination
Discipline/
Specialization School/college Board/
University Year of Passing %/
CGPA

B.E
Mechanical Engineering Sri Ramakrishna Institute of Technology, Coimbatore. Anna University
2011 7.68
12th standard
Computer Science + Mathematics Govt.Boys.Hr.Sec.
School
Udumalpet State Board
2007 82.08%
10th standard SSLC Govt.Boys.Hr.Sec.
School
Udumalpet. State Board 2005 75.2%
CERTIFICATIONS :
1. ASNT Level II in Ultrasonic, Radiographic, Dye Penetrant, Magnetic Particle testing and Radiographic film interpretation.
2. AWS-CWI (AMERICAN WELDING SOCIETY-CERTIFIED WELDING INSPECTOR)
CERTIFICATION NUMBER : 12021651
AREAS OF INTEREST :
- Welding Technology,
- Non – Destructive testing.
COMPUTER PACKAGES KNOWN :
MS Office, MS Windows, Basics of Solid Works, AutoCad, Pro-Engineer.
PROJECTS :
TITLE : PNEUMATIC GRINDING MACHINE.
DESCRIPTION : High pressure compressed air is forced on a fan which rotates it .This rotation is transmitted to the machining head by a shaft and the required operation (grinding) is carried out. The investment cost on the machine also works out to be less.
TITLE : IMPLEMENTATION OF TURBOCHARGER IN TWO WHEELER ENGINE.
DESCRIPTION : Turbocharger is a device which is used to precompress air before it enters the engine. It will enhance the power of the engine as well as increase its efficiency. In turn, it leads to an increase in the power output of the engine.
EXTRA CURRICULAR ACTIVITIES :
WORKSHOPS ATTENDED :
- Attended a workshop on ‘Industrial Automation’ at Sri Ramakrishna Institute of Technology”, Coimbatore on October 14th 2010.
- Was an integral part of the Organizing Committee at the National Level Technical Symposia – Resilience ‘09 and Resilience ’10.
INDUSTRIAL VISITS :
- Participated in one day industrial visit at TVS manufacturing unit, Mysore.
- Participated in one day industrial visit at Hindustan Aeronautical Limited (Both aircraft and Combat Helicopter Unit), Bangalore.
- Participated in one day industrial visit at PSG Foundry, Coimbatore.
DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge and belief. I promise to work sincerely and be prepared to do hard work duly abiding to organization.
PLACE : Chennai
DATE : May 2012 (N. Satham Hussain)

[Guest]

My CV is to large to copy paste