www.bonaceengineers.com Bonace Engineers Pvt Ltd Thane : Welding Inspector

[ijt.dolora@gmail.com]

Bonace Engineers Pvt Ltd, Thane
Company Web Page : http://www.bonaceengineers.com

Welding Inspector :
Location : Gujarat, Vishakapatnam
Experience: 7+ yrs
Qualification: B.E Mech / DME
Job Description :
** Candidate should have experience as a WELDING QA/QC inspector in Oil & Gas, refinery & petrochemical domain.
** Must be conversant with types of WPS for different types of material including ALLOY STEEL and SS,
** WELDING PROCEDURE QUALIFICATION AND WELDER TEST interpretation of films, UT, MPI/LPI interpretations and site inspections are normal.
** Welding consumable's inspection protection and maintains baking register.
** To review of welder's Id/card, certificate and knowledge in welding process as SMAW, GMAW, GTAW & FCAW.
** Understanding the welding process & NDT technique.
** To conduct W.Q.T. with contractor and preparation of report.
** N.D.T. inspection at site R.T, U.T, DPT & M.P.T.
** Monitoring P.W.H.T. & reviewing chart, ensuring NDT coverage as per requirement of project specification

Estimation Engineer :
Location : Mumbai
Experience: 7+ yrs
Qualification: BE Mech / Diploma Mech
Job Description :
** The incumbent should have specialization in preparation of proposals for Mechanical Construction works for process units of refineries / oil & gas / Fertilizer projects.
** Must have understanding of technical & commercial proposals, including preparation of construction estimates along with handling tender / pre-qualification documentation.
** Must ensure proper submission of technical bid document / pre – qualification document and preparation of tenders.
** Should have understanding in field investigation i.e., Pre bid site investigation and obtaining details require for quoting the items of bid.
** The incumbent should have sound knowledge of cost estimation, finance and rate analysis of various items in contracts. Negotiations with suppliers to obtain competitive market rates of material required for various items of BOQ. Incumbent should have good communication skills.

Planning Engineer/Manager :
Location : India & South Africa
Experience: 5 - 15 years
Qualification: BE - Civil / Mechanical
Job Description :
** Proficiency in latest planning tools like MSP, Primavera etc.
** Core Job knowledge. Should have an overview of powerplant both thermal and gas based.
** Must have good communication capabilities and presentation skills.
** Must have comprehensive planning, organizing, negotiating, analytical and decision making skills.
** Must have demonstrable capabilities of cross functional competence in the field of basic engineering, project management and construction activities

Painting / Coating Inspector :
Location : Mumbai
Experience: 5+ yrs
Qualification: Any Graduate with NACE, B Gas Certification
Job Description :
** Implementation of QA/QC procedure and Quality Plans.
** Carrying out QC activities for Industrial coating works including review project specifications, comply with Inspection and Test Plan (ITP) and adhere to the related safety requirements as per the project specification.
** Responsible for the inspection of Surface preparation and making sure that the PSPC standards are followed & the inspection of blasted plates at auto blasting/priming line.
** Accountable for checking all the quality parameters are followed and adhered to prior to & during the paint application.
** Conversant with all nondestructive/destructive inspection instruments but not limited to Whirling Hygrometer, Steel Temperature Gauge, Dew Point Calculator, relative humidity calculator/table, Blotter Test, Surface Profile Gauges, Profile Comparators, Needle Pressure Gauges, Magnetic DFT Gauges, Holiday Detectors etc.
** Qualitative testing, Chloride Test, Coating Adhesion Test, DFT measurement, Hardness Test etc.
** Qualitative/quantitative testing, Sieve Analysis for Blasting Abrasive, Blotter Test, Chloride Test, Coating Adhesion Test, DFT measurement, Hardness Test etc.
** Involved in the inspection of paint application during & after the application process and checking fordefects & rectify if any.
** Preparation of daily inspection reports.
** Maintain and preparation of QC documentation such as instruments calibration certificates, Material Safety Data Sheets, Technical Data Sheets, QC Reports, etc.
** Inspection of incoming materials.
** Preparation of daily painting / pinhole / holiday report and submitting for client

Apply through the website..

Contact Us :
Bonace Engineers Pvt. Ltd.
1st floor, Rane Bhavan, B wing
Opposite Hotel Twins,
Near Railway station,
Thane (E) - 400603
Maharastra, India.

[Unregistered]

Resume
Govardhana Naidu. Bongu.
EMAIL : naidu_qc AT yahoo.co.in

OBJECTIVE : - Seeking for challenging position in an esteemed organization to perform my skills and abilities that ultimately helps in growth of my career and organization.

PROFESSIONAL : -Seasoned QA/QC Inspection Engineer with management & site experience in complex high profile projects. Sound leadership abilities with concern for developing team member’s talents. Good history of nurturing strong working relationship with customer and meeting project milestones.

EDUCATIONAL QUALIFICATIONS :
CATEGORY YEAR BOARD/UNIVERSITY :
Diploma in Metallurgical Engineering 2003 State Board of Technical Education and Training(A.P).
S.S.C. 1994 Board of Secondary Education.

PROFESSIONAL QUALIFICATION :
CSWIP 3.1 Certified Welding Inspector (Certificate No.40393) TWI, UK
- ASNT NDT Level –II Ultrasonic Examination.
- ASNT NDT Level - II Radiography Examination.
- ASNT NDT Level – II Magnetic Particle Examination.
- ASNT NDT Level – II Dye Penetrate Examination.

COMPUTER SKILL :
Proficiency in MS OFFICE

PERSONAL PROFILE :
Name : Govardhan naidu Bongu.
Father’s Name : Krishna murthy Naidu Bongu.
Date of Birth : 01-02-1977
Marital status : Married
Languages Known : English, Hindi, Telugu & Tamil
Religion : Hindu
Nationality : Indian

PROFESSIONAL EXPERIENCE SUMMARY :
DURATION COMPANY DESIGNATION :
July-2003 to March-2005 Greecy Industrial Services Pvt.Ltd.-India. NDE- Engineer
March-2005 to June-2005 Kuwait National Petroleum Company-Mina Al Ahmadi Refinery-Kuwait. NDT - Inspector
July -2005 to April-2006 Bureau Veritas Quality Inspections-Russia NDE - Engineer
October-2006 to Jan-2007 Kuwait National Petroleum Company -Mina Al Ahmadi Refinery – Kuwait NDT - Inspector
Feb -2007 to Jan-2008 Greecy Industrial ServicesPvt.Ltd.- India. NDE- Engineer
Feb -2008 to March 2009 Punj Lloyds – Kazakhstan Welding Inspector
March -2010 to June 2010 Kuwait National Petroleum Company -Mina Al Ahmadi Refinery – Kuwait QC - Inspector
Nov 2010 to June 2011 Kuwait National Petroleum Company -Mina Al Ahmadi Refinery – Kuwait QC - Inspector
July 2011 to March 2012 Sasan Ultra Mega Power Project –
Madhya Pradesh - India QA/QC - Inspector
April 2012 to June 2012 Hinduja National Power Corporation – Visakhapatnam - India QA/QC - Inspector
June 2012 to Dec 2012 McDermott Middle East co - DUBAI Welding Inspector

MAJOR PROJECTS & CLIENTS :
- KNPC - Mina Al Ahamadi Refinery to KOC, Oil & Gas Export Pipe Line – KUWAIT, Through I.S.C.O.–Integral Services Company W.L.L.
- Oil & Gas Export Pipe Line Kashagan Oil Field Development Project – KAZAKHSTAN, Through Punj Lloyds – Kazakhstan, TPI Agip Kco – Italy.
- Sakhalin-II LNG Project, Sakhalin Island – RUSSIA, Through Chicago Bridge & Iron Company, USA & BVIS Europe
- NPCL – Construction Project, Kudunkulam – INDIA Through L&T Pvt Ltd., TPI German Lloyds & BVQI-India
- Suzallon Pipe line Project – HAZARIA – INDIA, Through Shell Global Solutions, Germany, BVQI-India, Punj llyod Limited. P-TAS Inspections, Baruni
- Sasan Ultra Mega Power Project – Madhya Pradesh – India Through Power Mech Projects Ltd – INDIA,
TPI Reliance
- Hinduja National Power Corporation – Visakhapatnam – India Through Power Mech Projects Ltd-India
TPI - BHEL
- ONGC Cluster 7 Well Platform – Dubai, Through McDermott Middle East co – DUBAI, TPI- IRS& ARAMCO

Roles & Responsibilities of NDT & Welding Inspector :
- Coordinating and Monitoring the NDT activities, and review of Reports and Inspection related documents.
- Carry out different NDE-Jobs like Radiography, Ultrasonic Examination. Dye penetrate Examination and Magnetic Particle Inspection for different constructions & Fabrication Projects.
- Preparing procedures for different NDE-Jobs and Familiar with Radiography Films Interpretation

Different methods as follows :
Specialized in Ultrasonic Examination of 9 % Ni-inconel butt welds by longitudinal angle probe
(a) CW (creep waves)-used for near surface discontinuities.
(b) RTT (Round Trip Tandem Technique)-used for vertically oriented defects in root area.
(c) 70 degrees, 60 degrees longitudinal angle probes used for Root Zone weld volume and fusion line
defects.
- Got approved by SHELL GLOBAL SOLUTIONS, GERMANY for specialized examination of 9% Ni, inconel butt-welds of LNG –Cryogenic Tanks in India.
- Familiar with SMAW, GTAW, SAW, GMAW/ FCAW Welding process
- Controls welding parameters and consumables during installation/construction activities, supervising welding operations
- Check weld surface and Ensure free from Surface Defects like Arc strikes crack, Pinholes, Porosity, Slag.
- Familiar with all root cause of Defects like LOP, Root fusion, Excess penetration, Burn through, Under cuts
- Ensure good welding by inspect of welding Electrode specification, Preheat of Electrode, Maintain Electrode Temperature and Current Setup.
- Master oven working condition monitoring.
- Monitoring of welder performance level.
- Maintained Daily Manufacture Status report
- Prepare documentation of preheating Report, NDT Reports
- Controls procedures and welders qualifications.
- Checks the availability and suitability of the filler material and of the preheating, welding, heat treatment, the bevels, the extent of the repairs made by the various welders and taking any corrective actions, the heat treatment record diagrams.
- Performs Pipes line up check, ensuring that all installed pipe/fittings are to the correct specification and that the material is in accordance with the specified Material Traceability requirements.
- Ensure that all Welding, Heat Treatment, and hardness testing, Inspection and Non-destructive testing are in compliance with the relevant codes and specifications.
- Orderly collect and manage/check documents certifying tests, controls and inspections documents, ensuring that all welding and testing related records form a complete package and reflect the ‘As Built’.
- Ensure the correct implementation of the approved Inspection Test Plan
- Examine visually work in progress and effectively supervises repair procedures.
- Reviews welding requirements for field erected structures, vessels and other process plants

HIGHLIGHTED EXPOSURES AND ACHIEVEMENTS AS A QA/QC INSPECTOR :
RESPONSIBILITIES. :
- Review the WPS and PQR & NDT procedures
- Performing welder qualification as per ASME SEX IX
- Preparing quality reports and documents etc
- Qualifying welders by proper WQT(Welder Qualification Test)
- Preparing ITP/QAP for different projects
- Incoming inspection of material and equipments by verifying the test and Calibration certificate
- Conducting all NDT, Mechanical, QC inspection and creating inspection records and getting singed from all relevant parties and sending properly to document or record control department
- Identifying material inspection for coded items as per ASME code standard. Inspection of raw materials.
- Witnessing hydro test, Non-Destructive test comprises of Auto and Manual UT, Radiograph film interpretation and magnetic particle testing and Positive material Identification
- Final bench inspection Mechanical testing and dispatch activities up to shipment.
- Generating stage wise report for inspection. Reporting daily process to client.
- Coordinating for material inspection, consumable, tools and equipments etc with relevant document. If required, perform mechanical test and chemical analysis in order to confirm the material as per project specification.
- Preparation of WQT and Test document.
- Familiar in SMAW, GTAW, SAW, GMAW/ FCAW Welding process.
- Knowledge’s in Tensile testing, Impact testing, Bend testing and check for the satisfactory clearance as per procedure qualification and Test Piece requirements.
- Exposure in welding procedure and performance of welder according to ASME SEX IX and AWS structural steel welding code D1.1 regarding WPS and welding aspects.
- Knowledge in API 1104.
- Excellent communication, co-ordination, organizing with co-workers and Management Skills and
managing skills about manpower handling.
- Involving all the inspection areas of construction and fabrication projects.
- Check the parameters of welding and counter check with approved WPS.
- Carry out the welding inspection before, during and after welding operation as per project specification.
- Coordinating for material inspection, consumables, tools and equipments etc with relevant document. If required, perform mechanical test and chemical analysis in order to confirm the material as per project specification.
- Prepare the Inspection Test Plan (ITP) as per project requirements.
- Monitor and control welding consumables.
- Carry out the visual inspection on weld joints. Inspection of PWHT, and Hardness.
- Carry out Hydro test as per approved test procedures.
- Preparing & Submission of Final documents.
- Familiar with Codes & Standards of ASME, AWS, API, IS etc.
- Codes Referred :
- ASME SEC II –PART A, C, ASME SEC. V, VIII DIV –1, ASME SEC. IX, Boilers & Pressure vessel code, ASME B31.3, API 1104, AND AWS D1.1, API RP 2A.

STRENGTHS :
- Willingness to learn.
- Try to achieve set goals and targets.
- Good understanding capabilities in Drawings.

DECLARATION :
I do hereby declare that all the information furnished above is true & complete to the best of my knowledge.

(B.Govardhana naidu)

[Unregistered]

L.KOKILAN,
E-mail :
Kokilan90 AT gmail.com
Kokilan_L AT yahoo.com

Personal Profile :
Date of Birth : 12.07.1990
Father Name : R.Lakshmanan
Gender : Male
Religion : Hindu
Nationality : Indian
Marital Status : Single

Computer Proficiency :
Familiar with
Basics
MS office
AUTO CAD

Academic project :
Project on “Sensor Operated Automatic Ramming Machine ” at Thanthai Roever Institute of Polytechnic College. Perambalur.

Industrial Exposure.

Industrial visit went to :
Southern Rail Way ,Golden Rock.
Shakthi AutoMobiles,Erode.
Ashok Ley Land ,Hosur.
Dalmia Cement,Dalmiapuram
Nehru Sugar Factory,Eraiyur, In Plant Training

Undergone to :
Southern Railway Central Workshop, Tiruchirapalli
-620 004
Dalmia cement (B) limited,Dalmipuram
-621651

Strengths :
The burning desire for self Improvement.
A good team player and positive attitude.
Hard working
Smart worker
Positive thinker

Personal Skills :
Ability to deal with people ITI.
Willingness to learn.
Excellent verbal
And written communication

Personal Traits :
Helpful and Optimistic

Co-curricular activities :
National level paper presentation 2010

Linguistic Abilities :
English :
To Speak
To Read
To Write

Tamil :
To Speak
To Read
To Write

Hobbies :
Reading books
Playing cricket

Reference :
1.Name : Mr.V.RAVISEKAR
Desgination : Senior Manager
Department : Quality Control
Industry : B.H.E.L. (Trichy)

2.Name :,Mr.S.Daniel B.E.,
Desgination : Managing Director ASNT Level III (UT,MT,ET,PT,RT,VT,IR)
ISO 9001 :2008 Lead AUDITOR Scan Star Inspection Technology PVT LTD, Mugappair, Chennai.

OBJECTIVE;
To get a challenging position where I can learn to gain knowledge
And grow in the organization.
Share Experience learn and gain knowledge which will help
In my carrier growth.
Seeking an opportunity in an Organization, where I can utilize my skills and abilities that offers professional growth, while being resourceful, innovative and flexible.

MY PROFILE :
“ Young, Dynamic, Hardworking and smart working, result oriented ”

MY SKILL SET :
Ability to work under pleasure
Ability to work under team
Ability to work with full satisfaction

EDUCATION QUALIFICATION :
DIPLOMA (MECHANICAL) First Class With Honours
(APRIL 2011)
Thanthai Roever Institute Of 91%
Polytechnic College ,
Perambalur. 621 212
HIGHER SECONDARY(March-2008) First class
Dalmia Higher Secondary School 84%
Dalmiapuram.621651
S S L C (March-2006) First Class
Dalmia Higher Secondary School 60%
Dalmiapuram.621651

TECHNICAL SKILLS :
ASNT LEVEL II in
Penetrant Testing
Magnetic Particle Testing
Ultrasonic Testing
Radiography Testing
Visual Testing

EXPERIENCE :
“ Technical Apprentice Training ” BHEL, Trichy, Tamil nadu.( QULITY CONTROL Department in School of welding, Welding technology centre. )
NDT INSPECTION ENGINEER
Scan Star Inspection Technology PVT LTD, Mugappair,
Chennai.

ROLES & RESPONSIBILITIES :
Corrosion check on pressure vessels, tanks, exchangers,
column etc.
UT lamination check on raw materials.
Carried out Ultrasonic Thickness measurement of pipelines.
A – Scan Ultrasonic flaw detection of butt – welded joints of process piping systems.
Corrosion survey & thickness gauging of in-service piping systems & pressure vessels.
UT thickness gauging of test separators, oil storage tanks, vessels, scrubbers & receivers.
Liquid Penetrant Testing and Magnetic Particle Testing in fabrication parts.
Carried out MT, PT for all Boiler Components.
Carried out PT on weld joints, water panels, bow nuts and nuclear components.
Prepared reports UT.
Visual inspection of vessels, storage tanks, pipe supports & piping.
Computerized report preparations by using MS word, Excel & PowerPoint.
Preparation and submission of reports & Co-Ordination with clients.
Coordination With Boiler Inspector For conducting welders Test
All type Of M/C Welding(SAW,STBW,IPW,ORBITAL) Welding & inspection
All type Of manual Welding(SAW,STBW,IPW,ORBITAL) Welding & inspection
Qualification of Welding Procedure Specifications (WPS) & Procedure Qualification Record (PQR).
Selection of welding processes & welding cosumables.
Classification of electrodes & their characteristics
Welders Qualification Document Preparation For IBR Welders
Heat treatment clearance
Practical Exposure in Non-Destructive Testing Methods
Visual inspection & Orientation checking.
Welding symbols , testing & inspection of welds
Training and testing of welders according to IBR & ASME

Penetrant Testing Performance :
Vessels, Heat exchanger, Columns, Heat exchanger tubes, Bowel edges, Bolts, Turbines, Wind mills plates.

Magnetic Particle Testing Performance :
Normal welds, Long shim, T. joints, Support joints, Nozzle joints.

Ultrasonic Performance :
Weld scanning in various types of plates and pipes, Thickness gauging with pipe line, plate laminations with codes and procedures client requirement

NDT Job Profile :
Visual stage inspection & final inspection of welding jobs as per ASME standard.
WELD Scanning in Plates and Pipes.
Thickness gauging jobs on pipelines, plates.
NDT Report preparation and documents as per requirements.

ULTRA SONIC TESTING :
Ultrasonic Thickness Gauging Instruments
1. Cyguns 1 Digital Thickness meter
2. Krautkramer DM4
3. Panametric

Ultrasonic Scanning Equipment
1. Landmark
2. Modesonic

MAGNETIC PARTICLE TESTING :
1. Permanent Magnet “U” Type, ELY, Magnaflux, Parker.
2. AC Yoke, 110 Volt & 220 Volt, Magnaflux, ELY.
3. UV Lamp, For Fluorescent MPI, ELY, Magnaflux.
4. Using Dry, Wet, Fluorescent & Visible particles.

Declaration :
I hereby declare that the above details furnished about me are true to the best of my knowledge.

Yours Sincerely,
Place : Dalmia puram
Date :
[L.KOKILAN]

[Unregistered]

CURRICULUM VITAE
QA/QC Engineer
JAYAKUMAR .K
E-Mail Id : jayakumarlalapet1983 AT gmail.com

Objective :
To be an integral part of a dynamic organization this utilizes my positives to realize the company to the best among the competitors along with self career development. I am looking for challenging position as a QA/QC Engineer to explore more in my area of interest.

Experience :
I have over 6 years work experience ranging over Fabrication, NDT Inspection & Quality Control working on Fabrication and Project sites in India.

Educational Qualification :
Bachelor of Engineering(Mechanical) (2002-2006) Ranippettai engg College , Vellore, Tamilnadu, India.

Certification :
ASNT NDT Level II In (According to 2006 & SNT –TC 1A 2006 edition Syllabus)
Radiographic Testing (RT),
Ultrasonic Testing (UT),
Penetrant Test (PT),
Magnetic Particle Testing (MT).

Technical Skills :
Able to prepare Inspection and Test Plan, Quality Control Procedure.
Knowledge in Welding Process such as SMAW, GTAW and GMAW.
Familiar with ASME -SEC V and SEC IX.
Able to Prepare and qualify WPS and Welder.
Familiar with Non Conformance Report and Corrective Action Report.
Production scheduling and monitoring the work force during emergency projects

Materials Handled :
Carbon Steel – ASTM A 106Gr.B, A105.
Low Temperature Carbon Steel – ASTM A 333Gr.6.
Stainless Steel (Austenitic) – ASTM A 312 TP 304.
Dissimilar Metals –P1-P8.
Non Metallic Piping (FRP, RTRP &HDPE).

Professional Experience :
Organization : Anbu engineering works Ranipet.
Client : BHEL, Ranipet.
Designation : QA/QC Engineer
Duration : From Nov 2006 to March 2008.

Organization : Bharat Heavy Electricals Limited, Ranipet.
Client : BHEL, Ranipet.
Designation : Graduate Apprentice
Duration : From April 2008 to March 2010.

Organization : TUV RHEINLAND (IND) PVT LTD.
Client : BHEL, Ranipet.
Designation : Third Party Inspector (TPI)
Duration : From April 2010 to Till Date.

RESPONSIBILITIES :
Material inspection (plates, pipe, fittings and structural item) as per supplier/manufacture document/mill certificate with respect to type, size, qty identification, witness of mechanical test and visual inspection.
Assisting to QA/QC Manager in planning and implementation of all QA/QC activities involved in the project.
Preparation of Inspection and Test Plan, Quality Control Procedure as per client specification requirements if necessary.
Reviewed and get approval of Welding Procedure Specification/Procedure Qualification Record in according to ASME Sec IX, ASME B31.3, ASME B31.1 and AWS D1.1.
Witnessed Welding Procedure Qualification and Welder Qualification.
Inspection in Fabrication of pipes and Structurals.
Monitored and Inspection of Pipes, Structural’s weld including Pre-heat and Post Weld Heat Treatment when necessary.

Reviewed Welder Qualification Test Certificate and Prepare Welder ID Cards.
Monitored welding consumable control and it’s storage at construction site and sub contractor’s fabrication shop
Reviewed Inspection and Test Plan and Quality Control Procedure from Subcontractors.
Reviewed and Get approval of NDT procedure from client and monitored NDT activities like RT, MT, PT, HT, PMI&FN
Ensured implementation of QCP (Quality control plan), procedure and ITP (inspection & test plan).
Monitoring of various welding process like GTAW, SMAW and GMAW.
Responsibility of qualification and disqualification of welders.
Witnessed NDT

Witnessed of Weld Repair activities as per Client approved WPS.
Responsibility for WPS ,PQR &WPQR
Monitored welding / visual inspection of materials like CS, LTCS (Low temperature carbon steel), different grades of Austenitic Stainless steels(,304L,310,316L)
Familiar about SS, Alloy Steel, LTCS and Carbon Steel Electrodes
Inspection in fabrication of Boiler Components like Tanks & Vessels, Columns, Ceiling Structures, and heat exchangers etc.
Witnessed/Reviewed PMI (Positive Material Identification) and Hardness test.
Ensure calibration of welding m/c, instruments and etc
Handled Vernier Caliber, Welding gauges and Temperature gauge
Prepared Waiver and Technical Memorandum if required.
Issued disqualification notice to welder.

Fit up and alignment, dimensional verification ,NDT and painting in fabrication of Boiler components such as tanks, Columns, Expansion Joints Ducts, Wind Box, Casings and etc
Inspection of Structure fabrication in various stages like Fit up, Alignment, welding, Non destructive tests and painting.
Maintained latest revision of all documents pertaining to quality.
Root cause analysis on failures, Training manpower for improvement & routine works
Solved all welding related problem during fabrication and erection.
Issuing and follow up Non Conformance Report.
Assisted lead auditor during quality auditing.
Co-ordination with client and Subcontractors.

Computer Skill :
MS Office-Word, Excel, PowerPoint
Auto-cad2009, Ansys 5.4

Personal Details :
Father Name : Mr L.S. KRISHNAMOORTHY(LATE)
Gender : Male
Marital Status : Married
Nationality : Indian
Date of Birth : 21.12.1983
Languages Known : Tamil, English, Telugu

Declaration :
I hereby declare that the particulars mentioned above are true to the best of my knowledge and belief.

Place : RANIPET
Date : 22/06/2013
(JAYAKUMAR .K)