Isometric, P&ID, PDS / PDMS Piping Design Engineer : Kuwait

[Admin]

A leading PMC Company In oil & Gas Sector.
www.nemps.com

Keywords: Isometric Design, P& ID, PDS , PDMS Etc.....

Designation: Piping Design Engineer - Kuwait - Vikas
Experience: 10 - 15 Years
Location: Kuwait
Compensation:
A leading PMC Company in Oil & Gas Sector.
Education: UG - Any Graduate - Any Specialization
PG - Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 14 Nov 2008

Job Description
Hi,
I am Vikas, writing to you from NET Employment Services Pvt Ltd, a Leading Executive Search firm. I would like to take the opportunity to inform you about openings with one of our Prime and Biggest client in oil & gas.
Designation : Piping Design Engineer
Company profile:
Our shares are traded on the London Stock Exchange, where the company is included in the FTSE 100 index and listed in the Oil Equipment and Services sector.
With annual revenues of over £2.3 billion, we have major operations in the UK and Americas and work internationally for customers from the Arctic to Australia, employing over 23,000 people in more than 30 countries worldwide. From scientists and environmental consultants, to engineers and project managers,
Location : Kuwait
Industry : Oil & Gas
Experience : 10+ years
Qualification : Any Graduate

B.S. or equivalent degree in mechanical engineering from an accredited university with minimum of ten (10) years relevant experience and 5 years in the oil/gas industry.

- Implement policies and procedures
- Execute day to day discipline issues on project
- Supervise drafting personnel
- Undertake tasks on behalf of Lead engineer as directed
- Undertake checking and preparation of design and engineering documentation.
- Deputise for Lead Engineer as required
- Liaison with other disciplines on interfaces
- Technical Integrity of work carried out
- Remain abreast of Current standards and procedures
- Undertake Bid evaluation of EPC contractors in line with contract procedure
- Monitor and approve EPC contractors work is in line with contract requirements.
- Undertake site investigations , surveys and studies
- Participate in Environmental, Safety and Design Reviews
- Liaise with other disciplines and client departments besides extensive expertise in piping design and engineering, familiarity in piping materials application and stress engineering is essential. Must be fully knowledgeable about codes, standards & recommended practices for this discipline.

Send your updated profile with following details:
Current CTC (Basic + other benefits)
Expected CTC (Basic + other benefits)
Joining Notice Period (in months)
Total strength of your organization
Total strength of your department
NOC will be given by your current Co.?
Visa Status

Professional References:
Name of the candidates Contact No.
1)
2)

If interested, kindly send across your CV on vik@nemps.com

In case you are not interested, but know of friends who may fit this profile, please refer them to me. Do forward this mail to your friends and colleagues as well

Thanks & Regards,
Vikas
NET Employment Services Pvt Ltd
DID : + 91 022 67135194
TEL : + 91 022 67135100
Email : vik@nemps.com
Web : www.nemps.com

Desired Candidate Profile
- Implement policies and procedures
- Execute day to day discipline issues on project
- Supervise drafting personnel
- Undertake tasks on behalf of Lead engineer as directed
- Undertake checking and preparation of design and engineering documentation.
- Deputise for Lead Engineer as required
- Liaison with other disciplines on interfaces
- Technical Integrity of work carried out
- Remain abreast of Current standards and procedures
- Undertake Bid evaluation of EPC contractors in line with contract procedure
- Monitor and approve EPC contractors work is in line with contract requirements.
- Undertake site investigations , surveys and studies
- Participate in Environmental, Safety and Design Reviews
- Liaise with other disciplines and client departments besides extensive expertise in piping design and engineering, familiarity in piping materials application and stress engineering is essential. Must be fully knowledgeable about codes, standards & recommended practices for this discipline.

Company Profile
Our shares are traded on the London Stock Exchange, where the company is included in the FTSE 100 index and listed in the Oil Equipment and Services sector.
With annual revenues of over £2.3 billion, we have major operations in the UK and Americas and work internationally for customers from the Arctic to Australia, employing over 23,000 people in more than 30 countries worldwide. From scientists and environmental consultants, to engineers and project managers,

Read A leading PMC Company In oil & Gas Sector. Blog

Executive Name: Vikas

Address:
9, 1st Floor, Brijwasi Building,
Opp Udyog Bhavan, CTS no 88,
Sonawala Road, Goregaon (E),
Mumbai,Maharashtra,INDIA 400063

Email Address: vik@nemps.com

Telephone: 91-022-67135194

[ANOOP M P]

RESPECTED SIR,
I AM ANOOP M P, COMPLETED B TECH IN MECHANICAL WITH 65%. I WORKED IN TATA MOTORS FOR 6 MONTHS AS ASSI. SERVICE ENGINEER. NOW I AM LOOKING FOR A JOB THAT WILL MORE MATCH TO MY PROFILE..
HERE I PASTED MY DETAILS.......
A N O O P . M . P
MATTUMMAL House
PURANATTUKARA . P.O
THRISSUR 680551
Contact No: – 0487-2309482
+919947352842
e-mail: anoopmp33 AT gmail.com

Education Background
- B-tech in Mechanical Engineering from Vidya Academy Science and Technology, Kerala in 2008 (65%) first class from Calicut university (AICTE Approved).
- Certificate in Post Diploma specialization course of Oil field engineering & Quality control from Induscan petroleum institute Nilambur, Kerala, India.
- ASNT level II Certificate in RT(Radiographic Test), UT(Ultrasonic test), MT(Magnetic Particle test), PT(Penetrant test).
- Intermediate with Science stream from Higher Secondary Board, Kerala in 2004(Marks 76%).
- High school from SSLC Board, Kerala in 2002(Marks 78.6%).


Technical skills
- Good knowledge in construction drawings such as P&ID, Piping isometrics, Equipment, Structural, GAD.
- Familiar with material inspection, dimensional check and documentation as per constructional material standards such as ASTM/ASME SA 106, SA 515, SA 516, SA 105, SA 312, SA 240, SA 234 etc and with ANSI standards of B36.10, B16.5, B16.9 etc.
- Through knowledge in welding standards of ASME section IX and API 1104. Familiar with welding procedure qualification, P numbers, Selection of electrodes, Weld visual inspection etc.
- Good knowledge in Radiographic inspection of weld joints, Ultrasonic inspection, Magnetic particle inspection and Penetrant test reporting and documentation.
- Fabrication of piping, structure, pressure vessels and other equipments documentation of history sheet, testpack clearing etc.
- Confident to handle the construction and quality control activities as specified in the drawings and applicable standards and specifications.

Software Proficiency
Office Automation : MS - Office.
Operating System : Windows 98/2000, 2003, XP, Me, Vista
Design Software : AutoCAD, Pro\ ENGINEER WILD FIRE, ANSYS.

Carreer Objectives
Seeking a position to utilize my skills and abilities, and make use of all the opportunities I get to learn latest developments in the field that offers professional growth and benefit of the organization while being resourceful, innovative and flexible.

Assets
As a person, I am responsible, presentable, efficient, creative, sincere and well organized with extreme job loyalty and dedication plus a strong personality and excellent skills in managing and handling people, situations and assignments, in addition to a positive problem-solving attitude.

Personal Details
Date of Birth : 28 Jan 1987
Father’s name : M.P.Prabhakaran
Mother’s name : C.V.Anitha
Marital Status : Single
Nationality : Indian
Passport No. : H2393451
Driving License No. : TR/9165/05
Languages Known : English, Hindi, Malayalam.

Reference

- Principal,
Vidya academy of science & technology,
Thalakkottukara P.O.
Thrissur-680501,
Kerala, India.
Phone:04885-287751, 287752. Fax:04885-288366.

- Induscan petoleum institute,
Induscan house,
Hospital road,
Nilambur-679329, Malappuram,
Kerala,India.
Phone: 04931-221957
Mob : +91-9447781382

[baladevk]

CURRICULUM VITAE



K.BALASUBRAMANIAN
No.9/1, Poonamalee Road,

Ekkaduthangal,
Chennai- 600 032. E-mail:baladevk AT yahoo.co.in

Mobile No: 09551072947

Objective:
Seeking a challenging position in Pipeline design that would utilize my technical knowledge and software skills and provide me with opportunities and thereby enhancing my experience and proficiency as a Piping Designer

Experience Summary:
Having 4 years of experience in Piping Engineering Field and 3 years in engg field & last one year In PDS as a Piping Designer It includes Detailed Piping Design, Equipment Modelling and Pipe Supports, Proficient in Use of PDS, Microstation and AutoCAD

Roles & Responsibilities (Design and Drafting)
o Equipment Layout & Modeling
o Piping Layout & Modeling
o Isometric extraction, Reviewing and checking.
o Clash Checking.
o Generating 2D Drawings by Drawing Manager.
o Generating P&ID and PFD by using Microstation.

SOFTWARE KNOWLEDGE
o Plant Design System (PDS) version 7.02
Equipment Modeling
Piping Designer
Isometric Drawing Manager
Drawing Manager
Interference Drawing Manager

o Microstation.v8 2004
o Auto CAD

WORK EXPERIENCE
1. Involved in the following projects of Mechicadd, Chennai,from Jun 08 to till date One of the leading CAD/CAM/CAE & Piping Consultant in India
· Projects Handled:
· Additional raw water tank facility for ATKINS DUBAI
· Handled students projects for oil and refineries
· Jindal Thermal power plant [4x250 MW] for BHEL CHENNAI
· Bellary Thermal power plant [1 x 500 MW] for BHEL CHENNAI

· Responsibility:
o Preparation of Equipment Layout and Piping Layout
o Pump Piping, Exchanger Piping, Tank farm Piping,
o Clash Checking.
o Isometric extractions.
o Generating 2D drawings by drawing manager.
o Preparation of MTO form Piping layout


2.Piping Engineer in R.PARAMASIVAN &SONS ,Tuticorin from oct 2003 to nov 2007. One of the leading piping contractors
· Projects Handled:
· M/s SPIC Plant in tuticorin
· Responsibility:
o Co-ordination with client and main sub contractors for day to day activities for piping fabrication and erection jobs.
o Preparation of daily and weekly job rolling schedule.
o Planning of material & manpower arrangement for site requirements
o As built drawing preparation for all site modification work.
o Co-ordination with stage inspection.
o Preparation of as built drawings

3.Technician in CARBORUNDAM UNIVERSAL LTD Hosur from oct 2002 to aug 2003.

4.Technical Apprentice Trainee in GE POWER CONTROLS INDIA (P) LTD
Hosur from may 2001 to may 2002.

5.Technical Assistant in ARUN ENGINEERING EQUIPMENTS Hosur from feb 2000 to april 2001.

EDUCATION
o Certificate course in Piping Engineering passed with First class from MECHCI CADD Chennai.
o Diploma in Mechanical Engineering Passed with First class from Indian Institute of Management Tech Chennai at Apr -2003.
o NACT Trained Certificate in August 2001 from GE Power Controls Hosur.
o NCVT (Fitter) passed with first class in August 1999 from NMS ITI Thirunelveli.
o SSLC passed with First Class in April 1997 from Nehru National Higher Secondary School Thirunelveli.

PERSONAL DETAILS
o Father's Name : P.Kumarasamy
o Date of Birth : 02.06.1982
o Nationality : Indian
o Religion : Hindu
o Marital Status : Unmarried
o Languages Known : English, Tamil, Malayalam, Kannada
o Permanent Address : Dhanakkarkulam Post,Vadakkankulam,
Tirunelveli District – 627 116
Tamilnadu,India.

o Passport Details : E 3555003 (Valid up to 22.12.2012)

Personal Strengths
- Able to form and encourage small group activities.
- Very good team player.
- Very good motivator and self-starter.
- Highly disciplined and follower of work ethics.

DECLARATION:
I hereby declare that all the above details are true to the best of my knowledge.

Yours Faithfully,

Place:
Date: (K.BALASUBRAMANIAN)

[Guest]

Curriculum Vitae


NAME :Shailesh M. Joshi

Email : shaileshjoshi_1978 AT yahoo.co.in
: shaileshjoshi.78 AT gmail.com
Designation : AutoCAD Civil Draughtsman ( Designer )
Total Experience : 13 years above
Gulf : 1 Years above
India : 12 Years above
Objective
A position that utilizes my creative skills and abilities in the designing field & construction industry derived from education and experience that can contribute maximum results to the growth and progress of a company.
Professional Summary
- Have completed various projects through AutoCAD- 2000 to latest Ver.2006 & 2007.
- Creating piping model, equipment model & frames work (Steel Structure) model using pds-3d, extracting orthographic drawing using PDS, clash detection, and extracting isometric using.
- Preparing pre-cast, Cast-in-situ, As-Built drawings and providing to design assistance.
- Managing CAD coordination on projects specific to CAD skills & capabilities, including working in co-ordination with client cad co-coordinators for modeling and following cad formats.
- Assisting drawings for designers, engineers, co-coordinators, team–members & client, also contractors of steel, reinforcement bar, hoardings, scaffolding etc.
- Applying skills to produce drawings consistent with instruction, guidelines & standards.
- Creating schematic drawings, organization chart, floor plans, one line diagram for chief engineer, managers, project managers etc.
- Drafts general and detailed working drawings based on approved preliminary sketches, Company or manufacturer's (sub-contractor) drawings. Includes foundations, elevations, profiles, section details, site plans, sewage, drainage, services layouts.
- Makes revisions & minor modifications to existing plans based on instructions or sketches received from engineers, surveyor concerned, take and records measurements & makes free hand drawings or field sketches to ensure dimensional accuracy of prepared drawings.
- Detailing for all type foundation such as raft foundation, combined footing, isolated footing, and rubble foundation, bar bending schedule and light pole foundation
- Preparation of pile layout, pile cap layout and detailing drawing and G.A. Drawing
- Preparation of Column layout, all floors framing layout, Foundation layout & detailing.
- Preparation of AutoCAD 3d Modeling drawing, 3d max animation, landscaping, walkthrough and rendering drawing for high raises, row rises, bungalows etc.
- All type of slab details such as flat slabs, slope slabs and pyramid roof slabs.
- Underground water tank plan, section detailing & pit plan and section detailing.
Summary of Skills Acquired
- Ability to produce drawings using AutoCAD software & related to design package.
- National Trade Certificate in Civil / Structural Draughtsman from ITI, Govt. Industrial Training Institute, N.C.T.V.T, Navyug Collage, Surat.
Work Experience
Continued job : - M/s. Crest creations, city light, surat
Position : (AutoCAD 3d modeling )
Job Responsibilities
High-rises, row rises, bungalows, all building in cad 3d modeling.
(1). April 2010 – June 2010 M/s. Aarvi Encon Consultants. Nariman point, Mumbai.
Client
Working with M/s. RADICON Gulf Consult & Kentz Engineering & consulting co. LLC, (RGCK). Al-Khobar, Kingdom of Saudi Arabia. (VISIT VISA)
Position : (AutoCAD Civil / structure designer )
Company Profile
The company is International Design Firms in Petroleum, Structural Consultancy in Civil Engineering field, Infra Structure, Etc.
Project :
Royal Commission, Saudi Armaco (Residential, University projects, Substations, Oil & Gas )
Job Responsibilities
- Structural : R. C. drawings, all floor framing layout & detailing.
- Borehole Location Plan Etc.
- Column layout and foundation plan and detailing.
(2). June 2009 – March 2010 M/s. SMV Engineering, Surat, India.
Position : (AutoCAD Civil / structure designer )
Job Responsibilities
- Structural : structural steel layout, Civil Detailing & R.C.C Qtc.
(3). May 2008 – March 2009 M/s. Dodsal Engineering and Construction .LLC,
Ruwi, Muscat, Oman.
Position : (AutoCAD Civil / structure designer )
Company Profile
The company (EPC) is one of the largest multinational contractors in construction field. And various groups of companies all over U.A.E. & Gulf.
Client
Petroleum Development of Oman
Project :
Qarn-alam steam plant.
Job Responsibilities
- Structural : R. C. drawings, BBS. & structural steel layout & R.C.C Qty.
(4). Sep. 2007 – May 2008 M/s. Essar Construction Ltd. Hazira, Surat.
Position : (AutoCAD Civil / structure designer )
Company Profile
The company is Structural Consultancy in Civil Engineering field
Job Responsibilities
- Structural : Pile-layout, Pile-cap Layout & Detailing, G.A. Drawing, Pump Foundation Drawing R.C.C. Retaining Wall, Beam Slab And Column Detailing,R.C.C Qty.,

(5). March 2006 – Sep. 2007 M/s. Miilicone consultants, kayan, Mumbai, India.
Position : (AutoCAD Civil / structure designer )
Company Profile
The company is Structural Consultancy in Civil Engineering field.
Client
M/s. Essar Construction Ltd. Hazira, Surat.
Job Responsibilities
- Assisting drawings for designers, engineers. Revision as per CAN (change advice notes), Etc.
- Architectural, Structural G. A. layout & detail plan,
- Pile-layout, Pile-cap Layout & Detailing
- R.C.C. Retaining wall Detailing and R.C.C. Qty.
(6). January 2002 – February 2006 M/s. Architect Dharam Bhagat, Surat
Position : (AutoCAD Civil Draughtsman )
Job Responsibilities
- Architectural : Plan, Elevation & Section, Corporation Drawing
- Plot Division for Residential & Commercial Building.
- Working Drawing, Presentation Drawing, stair details, kitchen plan and details & Etc.
(7). October 1997- Dec. 2001 M/s. Architect & Structure Engineer Jignesh patel &
jayesh Dalal, Surat, India
Position : (AutoCAD Civil Draughtsman )
Job Responsibilities
- Architectural : Plan, Elevation & Section, Corporation Drawing
- Working Drawing, Presentation Drawing, stair details, kitchen plan and details & Etc
- Structural : Column Centre line Plan, Footing Lay-out & Detailing.
- Ground Beam and Plinth Beam Layout & Detailing
- R.C.C. Slab Detailing & Water tank Drawing.
Sr. No. Exam
Passed Board /
University Year Of Passing CLASS
01. S.S.C.
(CLASS-X) Gujarat March-1995 (35%)
02. I.T.I. Civil D’man N.C.T.V.T. Certificate Gujarat July-1997 1st class
(72%)
03. H.S.C.
(CLASS-XII) Gujarat Oct.-1998 (40%)
04. T.Y.B.A Gujarat Oct.-2002 (44%)
Passport Detail
No. G 4112185, Surat, India ( Date of Issue : 02/08/2007, Date of Expiry : 01/08/2017 )
I.T. SKILLS
- AutoCAD 2D & 3D Ver, 2000 to 2006-2007
- 3d Max Studio
- Knowledge of 3D Modeling Package PDMS-11.6 ( Civil, Structure and Equipment) Training on Dodsal engineer constructional, Ruwi,Muscat,oman (June 2008)
- Knowledge of 3D Modeling Package PDS- 8.0 (Piping, equipment, frame work)
Training in Evion global services for on going project in Mumbai.
(27th Dec.08 to 8th Feb. 09)
- M. S. Office, Window-98, Window-XP
- Internet
Other Interest
Music, Cricket.
Language Skills
Reading English, Hindi and Gujarati
Speaking Gujarati, Hindi and English
I Declare That the Information Provided Above By Me Is Correct
If I Am Selected I Assure To Serve With Full Hard Work and Sincerity.
Place: - Karamla yours faithfully
Date: - Shailesh M. Joshi

[Guest]

SATHISH. K.G
mail : satheeshkg21 AT yahoo.com
CAREER OBJECTIVE :
To work with a professional managed organization in a position where the work is challenging and there is operational freedom to achieve the objects/ goals, The position should provide opportunity for learning and growth.
QUALIFICATION :
- Diploma in Mech. Engg. From Hindustan College of Engineering
Technology, Chennai with 67% in April 1995.
- HSLC Education from Govt.,Higher Secondary School,
Chennai with 71.4% in Mach 1992.

SOFTWARE KNOWLEDGE :
- Vantage Plant Design (PDMS)BENTELY/AVEVA
- CAD Works
- Auto CAD
SUMMARY OF CAREER PROFILE :
Working as a PDMS DESIGHN in Jagur consulting Engineers
Johannesburg-south Africa (feb2012 to oct2012)
- Working as a Piping Designer(cadworks) in Alpan Consulting Engineers Pvt. Ltd,
Chennai. (april2010 to jan2012)
- Worked as draughtsman Section of Tyre manufacturing Machinery in A.R. Engineering PVT. LTD, Chennai (dec 2007 to march2010.)
- Worked as a Maintance Department in Metal India Fab, Chennai
(May 1996 to November 2007)

PROJECTS EXECUTED :
Project : oil & Gas
Client Name : Hitachi power plant/southafrica
Job Involved : Modeling of Equipments
Modeling of Piping
Preparation of Piping Isometrics
ISO extraction through PDS
The ISO sketch updating using Auto CAD.
Project : Petroleum Products Storage Terminal
Client Name : Gulf Energy Ltd – Sharjah, U.A.E
Job Involved : Modeling of Equipments
Modeling of Piping
Preparation of Piping Isometrics
ISO extraction through PDS
The ISO sketch updating using Auto CAD.

Project : Fuel Reprocessing Unit (Nuclear Power Plant)
Client Name : Indira Gandhi Centre For Atomic & Research
Govt. of India, Kalpakkam.
Job Involved : Modeling of Equipments
Modeling of Piping
ISO extraction through PDS
The ISO sketch updating using AutoCAD.
Project : Plunger Testing Machine
Client Name : Govinda Rubber Tyres LTD (rajasthan, hyd, Chennai,
& kerala)
Job Involved : Assembled of fabrication machinery
Alignment motor & Gear box
Preparation of Alignment of screw rod inside the
BEVEL GEAR
Preparation of Flanges fitted in to the center of
Mandril

Project : TYRE BUILDING MACHINE
Client Name : Fenner INDIA LTD. (ceat ltd, hyd , kerala)
Job Involved : Loading the rear set of A L: Rollers with the rubber
Coated fabric similarly.
The rubber coated fabric is guided through the
Centering tray at the rear side and loaded to
The A L : Rollers of the servicer using the ply loading
Drive machine
Preparation of spare parts of the machine
RESPONSIBILITIES :
- Involved in Preparation of Equipment Layout
- Equipment modeling
- Piping Modeling
- Isometric extraction from PDS
- Extraction of Piping layout drawing through drawing manager
- Preparation of Piping Isometrics, Bill of Materials & Piping MTO
- Co-ordination with other discipline.

CONTACT DETAILS :
Father’s Name : K.P. Govindan
Date of Birth : 21.01.1974
Marital Status : Married
Nationality : Indian
Languages Known : English, Tamil & Malayalam.
DECLARATION :
I Declare that all details stated above are true to my knowledge.
K.G. SATHISH