www.sphinxworldbiz.com Sphinx Worldbiz Ltd Delhi, Ghaziabad, Gurgaon : Automobile Design

[Admin]

Sphinx Worldbiz Limited
http://www.sphinxworldbiz.com

Keywords: Mechanical Engineer

Designation: Design Engineer
Experience: 0 - 2 Years
Location: Delhi/NCR, Ghaziabad, Gurgaon
Education: UG - B.Tech/B.E. - Automobile, Mechanical, Production/Industrial,Diploma - Engineering
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Auto/Auto Ancillary
Functional Area: Engineering Design, R&D
Posted Date: 17 Nov 2008

Job Description
B.E/B.Tech/Diploma in Automobile, production and Mechanical engineers. Having a good communication skills, personality and work-hard. the person should know about Auto Cad Software. And a person who want to make a career in designing domain.

Desired Candidate Profile
He/she should have good communication skills, Hard working with good personality. Should have good knowledge of Interenet, Power Point, Excel, MS Word and Window XP 98. And Co-ordination with other support departments.

Company Profile
Sphinx Worldbiz Limited is one of the leading CAD/CAM/CAE Service Providers operating from New Delhi, India. SPHINX is a professional outfit headed by Engineer MBAs from Premier Institutes and with over 25 years of experience.

Executive Name: Miss Isha Soni

Address:
A 27 C Sector 16, Noida
Near registrar office
Noida,U.P,INDIA 201301

Email Address: mcadtrg@sphinxworldbiz.com

Telephone: 0120-4265597

Reference ID:
006

[rakesh_dwivedi]

hi

This is Rakesh Dwivedi working in Satyam Computers Service Ltd.
for last 1.5 years
I am interested for that post.
My Email ID is Rakesh_dwivedi@satyam.com

[Guest]

my name is lokesh .I have done my diploma for automobile engg. if u have a requirement for a diploma holder then plz plz... send a msg to my email I'd - baghel.2313@gmail.com

[Guest-IJT]

CURRICULUM VIATE

PERSONAL DETAILS
SMRUTI RANJAN SASMAL
Father’s Name : Mr. GAGAN BIHARI SASMAL
Date of birth : 18th June 1987
Gender : MALE
Nationality : INDIAN
Marital status : UNMARRIED
PERMANENT RESIDENCE: E-mail Id : smrutisasmal AT yahoo.com
AT: DAGARASAHI, P.O: SORAVA P.S: GOP smrutisasmal AT hotmail.com
DIST.: PURI, ORISSA-752107 CONTACT : +91-9540199098

OBJECTIVE:
To give continuous effort to innovate quick and easy way of increasing efficiency and converting ideas into reality. To interpret the technical problems & developing appropriate Products, tools and dies. Willing to work in an organization where I would like to add the value to an organization by using my cognitive skills and team-work sprit, improve systems innovation, creativity and smart work are appreciated and rewarded.

PROFILE:
A HIGHLY ADAPTABLE PROFESSIONAL ENGINEER with a total of 1 year 8 month’s (including in-plant training) extensive experience on Multiple Design Projects in the Component design and PrecisionTools.
- Expertise in Design & Development.
- Good Communication & Interpersonal skill.

STRENGTHS:
TAKING RESPONSIBILITIES OF
- Product Design.
- 3-D Modelling
- Drafting & Detailing
- Mould Design (Plastics)

CAREER SUMMARY:
Team Member (Design Engineer)
- Completed six month’s In-plant training in CENTER TOOLING MOTHERSON INDIA LTD, CHENAI as a TOOLMAKER.
- Working with ENGINEERS MECH (INDIA) PVT. LTD; GURGAON as a Design Engineer since July 2008 –TILL DATE. This company is Manufacturing of Automotive Door Handles, Auto Door Locking Linkages, Grip Parking Lever, Rear View Mirror Covers Window Regulators, Diesel Clamp, and Precision Plastic & Sheet Metal Parts.

CLIENTELE: -
- M/s Suzuki Motor Corporation, Gurgaon
- SUNVISOR INDIA PVT.LTD
- YAMHA Motors
- MINDA INDUSTRIES LTD.
- M/s SUPREME PLASTICS Ltd

TAKING RESPONSIBILITIES OF: -
- Product design & New Product Development.
- Detailed drawings for manufacturing in tool room
- Development of process & work layout
- Process Inspection & Standardization
- To analyze the problem arise in assembly
- To interact with vendors for improvement & complaint.

PROJECT DONE: -
- Battery cover mould for SUZUKI MOTOR CORPORATION.
Modelling and mould design in UG (NX-4)

- Handle Door Trim mould for MARUTI UDYOG LTD.
Modelling and mould design in UG (NX-4)

- Checking Gauge of Battery Cover for SUZUKI MOTOR CORPORATION.
Modelling and mould design in UG (NX-4)

- ARM & MIRROR FRAME Mould for SUNVISOR INDIA PVT LTD.
Modelling and mould design in UG (NX-4)
- Muffler mould for YAMHA MOTORS.
Mould design in UG (NX-4)
- CASE UPPER & CASE LOWER Mould for MINDA INDUSTRIES LTD.
Mould design in UG (NX-6)
- During In plant training: Handled project on following mould in tool room
‘Door trim’ mould [TATA FURESIA],
’Arm rest’ mould [MARUTI UDYOG LTD],
‘Rear bumper’ mould [GENERAL MOTORS]

QUALIFICATION:
- 10th from Board of Secondary Education, Orissa (2002)
- Post Diploma in Plastics Mould Technology, CIPET, Bhubaneswar.
- Continuing Grad IE (Mech.Engg.) in Institution of Engineers (INDIA).

SOFTWARE SKILL: CAD/CAM
UG NX-4 & NX-6 (Modeling, Drafting, Assembly, Manufacturing)
CATIA V5R15 (Modeling, Drafting)
AUTO CAD -2006


CURRENT CTC: - 1, 40, 000 (ANNUM)

DECLARATION:
I hereby declare all the above furnish information are true to the best of my knowledge and belief.

Place:
Smruti ranjan sasmal
Date: (SIGNATURE OF APPLICANT)

[Guest]

Raghav Singh
E-mail :singh_007raghav AT yahoo.com,singh.raghav06 AT gmail.com

Career Objective
To work with an industry that offers me a continuous learning environment .Where I can maximize my skills & improve my abilities as professional.
Educational Qualifications
Professional Qualification :

- B.Tech (Mechanical Engineering) :Completed from Moradabad Institute of Technology in 2010- Moradabad (NBA Certified) Affiliated to U.P.Technical University,
Lucknow.
Approved by AICTE.
- AGGREGATE : 66.8%

Academic Qualification :
Education Board College Year
Intermediate C.B.S.E. Board Kailash Chandra Memorial School,
Moradabad 2006
High School C.B.S.E. Board Kailash Chandra Memorial School,
Moradabad 2004
Computer Skills

- Languages : Basic knowledge of C
- Operating Systems : Windows Vista,XP
- MS Office 2007
- Microsoft business solutions.(AXAPTA).
Area of Interest
- AUTOMOBILE SECTOR.
Seminar
- Presented a seminar on BAJAJ DTSI TECHNOLOGY in Department of Mechanical Engineering in 2010 .
- Presented a seminar on HEATING AND VENTILATION OF AIRCONDTIONING(HVAC) in 2010.
Summer Training
- Successfully completed 4 week training in “Raunaq Automotives Components Ltd,Gajraula (U.P.)” in 2009.
- Successfully completed 4 week training at “Singhal Institute of CADD Centre & Engineering Services (P) Lucknow(U.P)” in 2008.
Project
- Has worked on the project “SOLAR WATER DISTILLATION BY SOLAR ENERGY ” as a major project of final year.
EXPERIENCE
Presently working in VTS TF AIR SYSTEM PVT LTD,(Formaly known as CLIVET TFA AIR SYSTEM.).(BANGLORE)
AS A PRODUCTION ENGINEER/PURCHASE EXECUTIVE
(FROM 4 JUNE 2010 TO PRESENT).
A TOP CLASS MNC REPUTED COMPANY.
Achievements & Extra Curricular Activities
- Participated in Group Discussion competition.
- HEAD of Mechanical Engineering Student Society.
- Participated in Paper Presentation in High-tech.
- Participated in Debate Competition.
- Participated in Sports activities.
- Has state level badminton championship certificate.
Personal Skills
Comprehensive problem solving abilities, good verbal and written communication skills, ability to deal with people diplomatically, willingness to learn & ability to handle stress.
Declaration

I hereby declare that all information stated above is true and complete to the best of my knowledge and belief and nothing has been concealed / distorted.
Place :MALUR(BANGLORE) RAGHAV SINGH