Kushal Engineering Enterprises Mumbai : Piping Designer / Checker

[Admin]

Kushal Engineering Enterprises

Designation: Piping Design Lead Engineers/ Designers/ Checkers required in Mumbai
Experience: 10 - 20 Years
Location: Mumbai

Job Description
GH Layout/Asst. Associate Chief Engineer – B.E with 20+yrs exp -1 no.
Lead Principal Engg. Layout- B.E with 15-20+yrs exp-2 nos.
Technical Lead/Sr. Designer.- ITI with 20+yrs exp-4 Nos.
Checkers-Layout, SPR – Dip./ ITI with 10-15 yrs exp-8 nos

Desired Candidate Profile
GH Layout/Asst. Associate Chief Engineer – B.E with 20+yrs exp -1 no.
Lead Principal Engg. Layout- B.E with 15-20+yrs exp-2 nos.
Technical Lead/ Sr. Designer.- ITI with 20+yrs exp-4 Nos.
Checkers- Layout, SPR – Dip./ ITI with 10-15 yrs exp-8 nos.

Company Profile
WE ARE ENGAGED IN PROVIDING DEPLOYMENT SERVICES FOR RECRUITMENT OF SR. ENGG PROFESSIONALS FOR SETTING UP OF INFRASTRUCTURE/POWER/ PETROCHEMICAL/OIL&GAS ETC. PROJECTS FOR MNC CLIENTS LIKE PETROFAC, L&T, RELIANCE, UHDE, AKER, TOYO, ACC, TECHNIP ETC

Address:
Kushal Engineering
522, Corporate Center,
Nirmal Lifestyles,
LBS Road, Mulund (W)
Mumbai,Maharastra,INDIA 400080

Email Address: apply@kushal-engineers.com
http://www.kushal-engineers.com

Keywords: lead designer checker

[Guest]

CURRICULUM VITAE
1. NAME : VINOD K MOHLA
2. DATE OF BIRTH : 30th JAN. 1952
3. PRESENT ADDRESS : 643,HOUSING BOARD COLONY, SARASWATI VIHAR,CHAKKARPUR
GURGAON,HARYANA-122002.
PH.NO:9953779389
4. NATIONALITY : INDIAN
5. MARITAL STATUS : MARRIED
6. NO. OF CHILDREN : THREE DAUGHTER’S
7. ACADEMIC QUALIFICATION :
DEGREE DISCIPLINE YEAR OF PASSING INSTITUTION/SCHOOL
11TH CBSE DELHI 1974 PRIVATE

8.TECHNICAL QUALIFICATION:
DEGREE DISCIPLINE YEAR OF PASSING INSTITUTION
DIPLOMA COURSE D/MAN MEHCANICAL 1974-1976 INDUSTRIAL TRAINING INSTITUTE,PUSA,DELHI.

9. POSITION & DISCIPLINE : Senior Desinger (Piping Dept.) Since
2002 to 2008
10. PRESENT WORKING : Asst. Specialist-Piping in GS Engineering &
Construction INDIA Pvt. Ltd.
(21 YEAR EXP. WITH
ENGINEERS INDIA LIMITED)

11 EXPERIENCE :
Sep.1976 to March1979 : Dalal Consultant & Engineering-DELHI.
April 1979 to March 1982 : Driplex Water Engineering-DELHI.
March1982 to march 2003 : Engineers India Limited-DELHI.
July 2004 to 18TH May 2007 : Saipem Triune Engineering-DELHI.
21ST May 2007 to Feb. 2008 : Flour Daniel India Pvt. Ltd. GURGAON.
21ST Feb to 2008 to 20TH Feb 2009 : GS E & C INDIA PVT. LTD (koria)


JOB DESCRIPTION SUMMARY

In these year following activites were peformed during the period of undertaken:-
GADS drafting, drawings checking, isomertic drafting isomertic checkings etc.
SUMMARY (EIL & IN OTHER COMPANIES)
30yrs. Exp. In the field of diff. refineries, Petrochemicals & offshore projects in the area of piping study drawings, equipments layouts. Piping bill of materials, piping GAD’S drafting, drawing checking, isometrics drafting/checking.
WORKING EXPERINCE IN PIPING
Following activites in piping were perfomed during the period of undertaken:-
1. Design & Review of Equipments layout, Review GAD’s and Isomertics for the most critical piping area in unit & offsite such as (a) Compressor piping (b) Furnance (c) column, vessels & pumps, off site piping like storage tanks &loading gantries.
2. Preparation/summary of bill of materials take off.
3. Familiar with Computer system such as
- AUTOCAD
- PDMS.
4. Visited various sites, like Refinery and Petrochemicals for fields engineering.
5. Interaction with other departments like Instrumentation, structure etc. for completion of projects.
During these years I was involved in drafting and checking of GAD’s, Preparation of study, Isometrics, Nozzles Orientation etc. for the following Refinery & petrochemicals projects.
Involved in these Jobs:

OFF-SITE FOR BPCL. MUMBAI.
- GRASS ROUTE REFINERY BONGAIGAON
- EXPANSION OF NALCO PROJECT DAMANJODI –ORRISA.
- SELTER EXPANSION PROJECT- ANGUL. (BHUBNESWAR)
- LPG UNIT – GAIL (LAKWA)
- LPG UNIT- ONGC (URAN)
- C2/C3 – ONGC (URAN)
- GAS CRACKER- MGCC –NAGOTHANE
- MODEC SAIPEN
- SRF
- SHELL NIGERIA
- KNPC-KUWAIT
- TOTAL –HUSTON
- RAS GAS- DOHA,QATAR.
- PROPYLENE RECOVERY UNIT JAVA-INDONESIA.
- PAREX FEED PROCESS UNIT,REFINING AND PETROCHEMICAL COMPLEX-TATARSTAN-RUSSIA.

Salary in Flour Daniel Rs.82,000/ O.T. as required by company.
Salary in GS E & C Pvt. ltd. Rs.55,000/ O.T. as required by company.

[Guest]

Curriculum Vitae

Mr. Pankaj Mittal
H.NO.1353/13,Gaushala Mandi
Gohana road.
Panipat-132103
Haryana,INDIA. B.Tech(Mech.)
Mobile-+91-9466579592
E-mail - pm_2 AT rediffmail.com,pmpm_2 AT yahoo.co.nz

MECHANICAL ENGINEER(QA/QC)

EXPERIENCE SUMMARY :-
TOTAL EXPERIENCE :- 3 YEARS
MUKAND ENGINEERS LIMITED.
I AM PRESENTLY WORKING AT PNCP PROJECT,EPCC-1,& HDPE UNIT EPCC-2B-CS,LTCS AND SS PIPING,SUPPORT FABRICATION AND ERECTION WORK AT IOCL,PANIPAT .FROM JUNE 2007 TO TILL DATE IN (QA/QC) DEPARTMENT. MY DESIGNATION IS JUNIOR MANAGER.
MY MAIN RESPONSIBILITIES ARE :-
- PREPARATION OF WPS,PQR BY FOLLOWING ASME SECTION IX.
- INWARD MATERIAL INSPECTION AND DOCUMENTATION.
- REVIEW OF MATERIALS / CONSUMABLES TEST CERTIFICATES.
- SUPERVISE THE WELDER QUALIFICATION TEST WITH CLIENT REPRESENTATIVE AND ISSUE WELDER ID CARDS FOR QUALIFIED WELDERS AND MONITORING OF WELDER PERFORMANCE.
- FIT UP AND WELD VISUAL INSPECTION ON REGULARLY BASIS.
- TOOL BOX MEETINGS WITH WELDERS ON WEEKLY BASIS.
- PWHT,PMI,DPT,MPT,RT INSPECTION.
- PREPARATION OF LINE HISTORY SHEET.
- LOOP CLEARANCE PHYSICALLY AND NDT WISE.
- BILLING CLEARANCE OF NDT.
- ENSURE THAT THE INTERNAL & EXTERNAL QUALITY AUDITS ARE CARRIED OUT AS PER THE SCHEDULE.
- MAINTAINING QUALITY DOCUMENTATION UP TO DATE.
- FINAL BOX UP INSPECTION AND DOCUMENTATION.
- GOOD COMMUNICATION WITH CLIENT AND CONTRACTOR.
PRESENTLY WORKING SITE:- I am presently working at PNCP,EPCC-1,HDPE UNIT,EPCC-2B,IOCL-REFINERY PROJECT,PANIPAT,HARYANA IN MUKAND ENGINEERS LTD.

Career Objective :
To seek a challenging and rewarding career, make positive contributions in the field of Mechanical Engineering, seek progressive growth in achieving Organizational and personal goals.

CURRENT CTC;- 400000 INR. ANNUALY

EXPECTED CTC;- NEGOTIABLE

AVALABILITY AFTER OFFER:- 15 to 30 DAYS.

PASSPORT:- AVAILABLE

Academic and Technical Qualifications :

B.Tech in Mechanical Engineering from Kurukshetra University with 73% Honours Degree.
EXAMINATION BOARS\UNIVERSITY YEAR % age
X HBSE,HARYANA APRIL-2001 84
XII CBSE APRIL-2003 64

Additional Qualification :
1. ASNT LEVEL-II CERTIFICATION IN RT.
2. ASNT LEVEL-II CERTIFICATION IN MPT.
3. ASNT LEVEL-II CERTIFICATION IN DPT.
4. ASNT LEVEL-II CERTIFICATION IN UT.
Industrial Trainings :

1 6 weeks training at BHUPENDRA STEELS PVT. LTD. In July-august 2005
2 6 Week training at SONALIKA INTERNATIONAL TRACTORS LIMITED HOSHIARPUR in July-august 2006
Projects :
1 Analysis of chip formation for different materials at different cutting parameters.
2 Electricity generation from amusement park.
Achievements:-
1 Excellent growth in academic record.
2 Author of HANDBOOK OF PROPERTIES OF ENGINEERING MATERIALS AND DESIGN DATA FOR MACHINE ELEMENTS.
3 Miracles results shown in construction.

Computer Skills

MS Word , MS Power Point , MS Excel
Basics and Internet Surfing.

Personal Profile :

Father’s Name Lt. Sh. Suresh kumar mittal
Date of birth 26 nov 1986
Sex Male
Marital Status Single
Nationality Indian
Strengths Determined and Quick learner
Hobbies Bicycling, watching news channel, playing cricket
Languages known English, Hindi

Place: Panipat (Pankaj Mittal)

[Guest]

Mr. BHALCHANDRA DATTATRAY VACHAKAL
Current Address: - 502/5, Al Ameri House, Near Golden stand 10, Dubai, U.A.E.
Mobile No = 00971+504758460
Office No = 00971+48034774,
Email = bhalchandra.vachakal AT gmail.com ,
info_bhal AT yahoo.com ,


SUMMARY:
Over 9 years of experience in Piping & Layout design for Oil & Gas (Onshore and Offshore), Chemical, Petrochemical and Refinery Plants for Design / Detail Engineering and Modification projects. Using in 3D PDS Modeling, Good Working knowledge of PDS, Smart Plant Review, Pelican Forge, Microstation, AutoCAD and PDMS, is added advantage /2D/3D

TECHNICAL SKILL:
- 3D Modeling of piping as per P&ID, using PDS Intergraph Ver. 8.0,
- Equipment modeling as per vender drawing detail.
- Study, preparation and checking Pipe Supports Arrangement as per support standard and design special pipe supports sketches.
- Conduct 3D model reviews (internal / external)
- Isometric Extraction and Checking
- Studies and MTO estimation for Bids.
- Columan, Exchanger, Pump and compressor Piping
- Plot Plan Development and GA Preparation,
- Rack Piping, OSBL and ISBL Piping.
- Piping Clash & Review in SPR with client
- Nozzle Orientation.

COMPUTER AIDED DESIGN & SOFTWARE:-

Intergraph : - PDS Ver. 8.0 (Good Experience)
Aveva : - PDMS
Bentley : - Pelican Forge (Support Modeler)
Intergraph : - Smart Plant Review
Bentley : - Microstation’SE/J
AutoDesk : - AutoCAD

LIST OF FUNCTIONS: -

- PDS Piping Designer with J. Ray McDermott. Dubai, U.A.E. ( Feb. 2010 to Till date)
- Associate as a PDS Piping Designer with Chemtex Global Engg. ( Feb 2009 to Sep 2009 )
- PDS Piping Designer with Becrel Engineering Pvt. Ltd. ( Feb 2008 To Jan 2009 )
- PDS Piping Designer with SP Consultant Services ( July. 2004 To Feb 2008 )
- Designer with Reliable Consultant Services ( Dec. 2002 To July. 2004 )
- Piping Draftsman with Reliance Petro Chemical.( Sep. 2001To Dec. 2002 )
- Piping Draftsman with CAD Solution ( Dec. 1999 To Sep. 2001 )
EDUCATIONAL PROFILE:-
- Mechanical Draftsman from Industrial Institute, India.
- Piping Draftsman from Akar Institute, Mumbai, India
- Certificate Course in AutoCAD in Aug.1999 from Zaknet Institute, Mumbai. India
- H.S.C. March 1997
- S.S.C. March 1995

Detail of Work Experience:-

1) J. RAY McDERMOTT ENGINEERING. DUBAI (U.A.E.)

J. Ray McDermott is a leading worldwide marine solutions company with fabrication facilities in the Americas, Middle East, Caspian and Asia Pacific. Services include design, fabrication, transportation and installation of offshore platforms, and installation of offshore pipelines.
Designation: - PDS Piping Designer
PROJECT – Rasgas Expansion Project (Ras Laffan Liquefied Natural Gas Co. Ltd.)
JOB PROFILE:-
- Piping and Equipment 3D modeling using PDS
- Preparation and checking of Design and Fabrication Isometric drawings with Bill of Material/Joint numbers/Spool numbers, Field weld marking.
- Support modeling as per support stander detail and extraction 2D drawings using Pelican Forge (Support Modeler)
- Preparation and Checking of equipment layouts, Safety and Escape route layout.
- Clash checking and Review in Smart Plant Review
- Preparation of General Arrangement Drawings using Drawing Manager.
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.

2) CHEMTEX GLOBEL ENGENEERS PVT. LTD. MUMBAI
Chemtex is an engineering, Procurement and construction company that specializes in delivering technology oriented projects for the Oil & Gas Petrochemical, Refinery, Polymers, Fibers, energy and Environmental Industries
Designation: - PDS Piping Designer

Client: - Burns & McDonald (USA)
PROJECT: – Memphis Refinery and Port Auther Refinery.

Client: - ABB (Italy)
PROJECT: –Potassium Naitrate Crystallization Plant KN03 CHILE

JOB PROFILE:-
- Piping and Equipment 3D modeling using PDS
- Isometric Extraction, Checking and MTO Preparation
- Support Modeling and extracting detail drawing from Pelican Forge (Support Modeler)
- Conducting and operating (SPR) model review with Client
- Pump and Exchanger Piping Designing, Pipe Rack Piping Designing.
- Study and Understanding the PID & Client Specification and commenting on them with respect to layout
- Prepare Piping layout, Equipment layout (section, Elevation), GAD Drawing, Special Supports Drawing etc.
- Study & checking of the Nozzle orientation & Ladder/ Platform drawing. Checking the nozzle reports.
- Doing Squad checks and commenting on the vendor drawings.
- Interaction with Multi Office disciplines Civil, Process, and Stress etc.
- General Plot Plan and Equipment Layout preparation.
- Check & Review Clashes, and clear all clashes in clash report



3) BECREL ENGINERRING PVT. LTD. MUMBAI
BecRel Engineering Pvt. Ltd. is engaged in providing Design / Detailed Engineering Services as a Sub-contractor to Bechtel Corp., for the Jamnagar Export Refinery Project for Reliance at Jamnagar in Gujarat. Bechtel Corp is main Contractor engaged by Reliance to provide the EPPMCC services for the Jamnagar Export Refinery Project.
(Reliance Petro Chemical and Bechtel Engg. Pvt. Ltd. Joint venture)
The venture carries out the different design conditions for the worlds largest grass root refinery in Jamnagar i.e., Jamnagar Export Refinery Project (JERP).
Designation: -PDS Piping Designer
Project: - Jamnagar Export Refinery Project

JOB PROFILE:-
- Piping Modeling of Big bore & Small bore lines with the help of P & ID’s using PDS.
- Modeling of Major Equipments like Compressors, Heat Exchangers, Columns, Spherical Tank, Pumps etc. as per vendor drawing using Equipment modeling.
- Carrying out the Batch Extraction for the lines.
- Designing of Supports with the help of Support Standards using Piping and Equipment modeling.
- Isometric checking (Bill of material, Piping routing, P&ID/GAD, Support arrangement, Flow direction,)
- Coordinates (N, S, EL.) Piping Specifications, Location of Vent & Drains at appropriate locations, Accessibility)
- Check & Review Clashes in Smart Plant Review. (SPR)
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.

4) M/s. SP CONSULTANT SERVICES, MUMBAI.
SP Consultant is a engineering design consultancy engaged in Piping Design & routing for Oil & Gas industry .Also engaged in design of Boiler & Pressure vessels.
Designation: Piping Designer
Client: – Reliance Petro Chemical
Project: - Jamnagar Export Refinery Project
JOB PROFILE:-
- Equipment and Piping Modeling as per Piping Layout, Equipment Layout & P&ID
- Isometric Extraction of using Isometric Drawing Manger
- Nozzle orientation as per the convenience of routing.
- Checking Isometric And MTO
- Place logical and physical support using Piping Equipment Model
- Preparation of piping layout.
- Preparation of GA Drawing.

5) RELIABLE CONSULTANT SERVICES, MUMBAI.
Engineering, Management and Construction Services to the Oil & Gas, Refining, Chemical, Polymer, Pharmaceutical, Environmental Protection and Transportation Industries.
Designation: - Piping Designer
Project: - Haldia Petrochemicals Ltd.
JOB PROFILE:-
- Drafting of Piping Layout, Isometrics and Equipment
- Proficient in preparing isometrics with MTO.
- Preparation of Isometrics.
- Help to Preparation Plot Plan Development.
- Draw Isometric, Pipe and Fitting Material Take Off
6) RELIANCE PETRO CHEMICAL LTD, MUMBAI
Designation: - Piping Draughtsman
Project: - Patalganga Power Plant
JOB PROFILE:-
- Preparing Piping Layout, Equipment layouts, Equipment Drawings, P & ID for isometric view in Auto cad 2000
- Developing piping general arrangement around columns, heat exchangers, compressors, turbines, pumps and various other process equipments.
- Preparing Piping Layout, Equipment layouts, Equipment Drawings, P & ID, Material specifications to draw isometric views on Isometric sheets.
- Preparation of GA Drawing

7) CAD SOLUTION, THANE.
Designation: - CAD / Microstation Operator
- Prepared Assembly & details drawings for dies, Tools & Machine Parts.
- Modification & Development drawing of dies, Tools & Machine Parts on exciting machine
- Reporting to Technical Office Manager.

*PDS DESIGNING & MODELING SKILL*
- Complete piping study with plot plan with P&I D’.
- Modeling Equipment as per vendor document.
- Routing Piping as per given P&ID.
- Modeling control valve stations, PSV’s, Flow elements etc. as required.
- Modeling Slope lines as per process requirement.
- Modeling required Piping Supports for critical lines.
- Updating stress comments in model.
- Modeling Structures & platforms for equipment and valve access.
- Modeling the access way to access the required stations and equipments.
- Modeling Pressure & Temperature instruments as per instrument hook-ups.
- Co-ordinate with other area members for Iso Interface checking.
- Checking clashes in model through Smart Plant Review clear and correct in Model.
- Extracting Isometric drawings and checking PDS Iso errors.
- Checking extracted isometrics with P&Ids and Checking MTO and commodity code.
- Finalise the routing with lead engineer and checker.
- Updating the Vendor and Process comments in model.

PERSONAL BACKGROUND
PASSPORT NO : H2759463
Nationality : Indian
Age : 31Yrs.
Date of Birth : 27 October 1979
Sex : Male
Language Known : English, Hindi & Marathi.

I am a very hardworking, explorative and sincere person with a great desire to use my utmost potentials and prove them through my work.
Date :
Place : Mumbai (Bhalchandra vachakal)

[Guest]

CURRICULUM VITAE

KIRAN P
#54, 2nd Cross, Manjunatha Layout,
Arekere, Bannerghatta Road , E-mail : kiran010 AT gmail.com Bangalore-76 Mobile : +91-9916755988


Objective :
To work in an organization with challenging and competitive environment, where I can achieve work satisfaction & desired career growth through perpetual learning & personal development.
Work Experience :
- M/s T R RAJAN CONTRACTORS AND DEVELOPERS – 1 year (As Site Engineer)
- M/s DAVIS LANGDON & SEAH CONSULTING INDIA Pvt ltd – 4 months (As Assistant Quantity Surveyor)
Personal Skills :
- Comprehensive problem solving abilities, Ability to deal with people diplomatically.
- In future will update my existing skills and learn new skills
- Honesty, Confident, good communication skill, committed to work.
Software Skills :
Operating System : Windows 2000/XP.
Languages : C, AUTOCADD, STAAD, NISA.

Applications : MS-Office, MS Projects.

Educational Qualification :

Course Institution Board Year of Passing Percentage
MTech (Structural Engineering) RV College Of Engineering Visvesvaraya Technological University, Karnataka 2010 68.60%
B.E (Civil Engineering) Bangalore College Of Engineering and Technology Visvesvaraya Technological University, Karnataka 2007 63.41 %


Project Details :
1. Company : M/s.T R RAJAN Contractors and Developers, Bangalore.
Client : M/s PRESTIGE GROUPS.
Site : PRESTIGE LIBRA.
Role : Site Engineer.
Project description :
I worked in this project as a Site Engineer and my role in this project is to handle all the works as per the requirements of the client. The project is a commercial complex constructed by using Flat slabs.
2. Company : M/s DAVIS LANGDON & SEAH CONSULTING INDIA Pvt ltd
Client : M/s PRESTIGE GROUPS.
Site : PRESTIGE SHANTHINIKETAN
Project description :
I worked in this project as an Assistant Quantity Surveyor and my role was to find quantities and do contractor billing. The project involved both residential and commercial buildings.
Academic Projects Details :
B.E. Project
ANALYSIS AND DESIGN OF MULTI STOREYED BUILDING
Location : M/s. RM Consultants, Bangalore
Duration : 2 months
Team Size : 3
Role : Team member
Project description :
The project chosen was analysis and design of Multi Storeyed Building. As per code specification, keeping in view the requirements & utility of the building, the dead load, wind load, partition loads & other superimposed loads have been considered for the analysis & design of the structure in accordance with specifications of IS 875-1987.
MTech Project
EFFECT OF RC BANDS AND CONTAINMENT REINFORCEMENT ON THE SIESMIC PERFORMANCE OF MASONRY BUILDING
Location : BMS College, Bangalore
Duration : 1 year.
Project description:
The project deals with analyzing the masonry building under lateral dynamic loads. In the shock table test the model to be tested is constructed on top of a rigid platform to which a series of base shocks are imparted through a pendulum impacting device. The performance of RC bands and containment reinforcement is studied.
Personnel Profile:
Father's Name : PURUSHOTHAM A G
Date of Birth : 14Th April 1986
Sex : Male
Marital Status : Single
Permanent Address : #54, 2nd Cross, Manjunatha Layout ,
Arekere, Bannerghatta Road,
Bangalore-76
Languages Known : English, Kannada, Telugu and Hindi.
Declaration:

I here by Declare that all the above information is true & correct as per my knowledge.
Date:


Place: Bangalore Signature of Candidate
KIRAN P