www.m.orbitcorp.com m.orbit Corporation Ltd Mumbai : Safety Supervisor

[ijt.dolora@gmail.com]

m.orbit Corporation Ltd, Mumbai
Name of the Designation : Safety Supervisor
Job ID : 007
Department : Projects
Employment : Permanent
Qualification : Diploma in Safety Management
Location : Mumbai
Experience : 8 years
Job Profile :
Reporting to the Site-in-charge / DGM, your responsibilities will be to:
Take observation rounds of the site on a daily basis to note safety precautions
Take care that safety measures and safety clothing are being followed in the construction activities, storage activities and in the general working at the project sites.
Design the safety platform.
Ensure proper usage of fire fighting equipment.
Ensure adequate use of all safety tools and equipment on the construction site.
Oversee that all the engineers and workers are updated on all safety related issues.

Name of the Designation : Safety Officer
Job ID : 005
Department : Projects
Employment : Permanent
Qualification : Degree / Diploma in Safety Management
Location : Mumbai
Experience : 8 years
Job Profile :
Reporting to the Sr. Vice President (Projects) you will be :
Taking observation rounds of all sites to note safety precautions.
Implementing and maintaining Internal Safety Audits and OHS plans.
Preparing SOP’s and monitoring its effective implementation.
Periodically reporting to the management.

Name of the Designation : Site Supervisor
Job ID : 009
Department : Projects
Employment : Permanent
Qualification : B.E.(Civil)
Location : Mumbai
Experience : 5 years
Job Profile :
Supervising the overall work at the site :
Preparing the daily labour report by actually counting the labours along with the contractor’s engineer and recording of the same in the register and on site display board.
Cross checking the availability of labours, resources etc. before the start of concrete work.
Coordinate with the Site-in-Charge.

http://m.orbitcorp.com/en/section/ca...rrent-openings

The candidates are requested to mail their resumes to info@orbitcorp.com (OR) http://m.orbitcorp.com/en/job/career...sor.html/apply

Contact Us:
m.orbit Corporation Ltd,
1st Floor,,165
Dr. Annie Besant Road,
Mumbai

[Guest]

CIRRICULUM VITAE
SHAHID PARWEZ
North 24 Parganas
Kolkata123
Email – shahidsafety28 AT gmail.com

OBJECTIVE :
A challenging carrier in the Industrial field of management.
AIMSS IN LIFE :
To build a career in a reputed organization
Flexible and ready to work anywhere

KEY SKILL :
Command over written and spoken English, Hindi and Urdu
HOBBIES :
Reading and listening Ghazals
Playing and watching Cricket

ACADEMIC QUALIFICATION :
Complete the examination of Matriculation with first division from B.S.E.B, Patna (62.25 %)
Complete the examination of Intermediate of science with second division from B.I.E.C, Patna (50.25 %)
Complete the examination of B.Sc (Chemistry Hons.) with first division from V.K.S.U, Ara
VOCATIONAL QUALIFICATION :
One year Diploma in computer application
One year Diploma in Industrial Safety management from ANNAMALAI UNIVERSITY.
PROJECT PROFILE :
Project report on “A Brief study on personal protective equipment.

WORKING EXPERIENCE :
PRESENT EMPLOYER
ORGANIZATION ARAVALI INFRAPOWER LTD.
LOCATION NEW DELHI
PERIOD December 2011 to Continue
POSITION SAFETY SUPERVISOR
JOB RESPONSIBILITIES :
Conducting Tool box meeting.
Maintain housekeeping at site.
Participate in safety meeting.
Co –Ordinate with organization stakeholder.
Participate in on site safety training different activities.

PREVIOUS EMPLOYER :
ORGANIZATION Essel Kitchenware ltd.
LOCATION Pardankuni (Kolkata)
PERIOD April 2010 to November 2011
POSITION HELD QUALITY CONTROLLER

PERSONAL DETAIL :
NAME : SHAHID PARWEZ
DATE OF BIRTH : 21st May 1979
GENDER : Male
MARITAL STATUS : Unmarried
CITIZENSHIP : India
MOTHER TONGUE : Urdu
LANGUAGE KNOWN : English, Hindi, Urdu, Bengali
I solemnly declare that all of the above statements are true
Place :
Date :
Shahid Parwez

[Unregistered]

S.Ragavendra Prasad
royaraga AT gmail.com

Piping Erection and Commissioning Rotary Equipments Erection and Commissioning
SAP Endure for service orders Stationary Equipments Erection and Commissioning
Maintenance Engineer ISO Documentation

Summary :
- Five years experience in Petrochemical.
- Proficient in planning & execution of day-to-day activities in mechanical maintenance Environment.
- Extensive experience in Erection & Commissioning of Mechanical related jobs and Maintenance jobs.
- Good interpersonal skills, team spirit, commitment towards work, result oriented, hardworking, orientation and determination to learn new technologies.
- Take up challenging tasks. Worked with all levels of corporate, excellent customer interface skills.
- Ability to work in a fast paced, demanding environment, able to work independently, one-on-one, in a team setting and in a virtual team environment.
- Skilled to follow all safety, engineering and project procedures.
- Uncanny ability to handle projects from planning through to execution.
- Vast project management experience in an industrial manufacturing environment.
- Skilled to take project from conceptualization to implantation.
- Can work effectively as part of a cohesive team or independently. Accustomed to work under pressure and to inflexible deadlines.
Mechanical Engineering :
- MOL (Milk of Lime) Plant Engineer for Maintenance.
- Erection, Execution and Commissioning Engineer for the Mechanical project.
- Planning Preventive measures to avoid production loss.
- Maintaining critical spares, following purchase request, purchase order through SAP.
- Execution of jobs with proper Safety permit.
- Basic monitoring day- to-day maintenance activity in process plant and maintaining daily log book for the same.
- Receive breakdown slip form concern department and appoint the technician to attend the problem.
- Maintaining complete machine history records.
- Maintaining daily preventive check sheets.
- Planning of Preventive maintenance plan.
- Preparing machine history register.
- Master of Engineering in Industrial Safety.
- Master of Business Administration in Human Resources.
- Bachelor of Engineering in Mechanical.
- Master Diploma in CADD from the 2003 to 2006.
- Diploma in computer application (LIBA).
- First Aid Course in St’Johns Ambulance.

Client : Manali Petrochemical Ltd Duration: March’08 to Current
Client Details :
Manali Petrochemical Ltd (MPL) is a Leader in the Production and Marketing of Propylene Oxide, Propylene Glycols and Polyol in India is Located at Manali in Chennai, India MPL is engaged in the manufacture of the above Petrochemical products the Company operates two grass root production facilities at Manali to source indigenously as well as imported from Japan and China and the pre-polymers produced at MPL in meeting the demand of polyurethane industry in India.
Project : Polyol Train-II Augmentation Plant
(Project Value : Rs. 10 Crore)
Mechanical Project Engineer
Responsibility :
- Implementation of complete pipes and Equipments and material handling as per the Piping Layout, Isometric, P & I drawing.
- Erection of Pump, Motors, Seal Pot and Compressors according to the specification and alignment will be done after completion of erection.
- Handled client interactions and inspected for Ball Valves.
- Extensive experience in engineering, design, procurement and construction support.
- Fully familiarized with applicable design codes and regulations in oil and gas industries like ASME, API.
- Coordinated workflow within the engineering team, executed mechanical engineering scope, reviewed mechanical drawing content, reinforced and promoted quality and safety standards, interfaced with client and vendor engineering staff of projects.
- Developed isometrics and BOM for the modification jobs of pipelines, equipments and documentation was done.
- Installation of Mechanical seal in rotary equipment like agitator and pumps.
- Erection of Equipment and checking the orientation of the equipments.
- Ensured successful completion of mechanical deliverables and monitoring of project performance for mechanical tasks, schedules and costs.
- Co-ordinates with operation dept for the modification and additional provision of tapping points like nozzles and valves for the easy operation, which might not given in the ISO and P&I.
- Inspecting the welder qualification and Involved in welding inspection (Penetration) for the pipelines.
- Inspection of mechanical valves and instrument control valves are provided in correct position as per ISO drawing.
- Supervised mechanical design of facility, inspected layout, equipment arrangement and plant utilities.
Project : PSA Unit
Responsibility :
- Erection and Commissioning of Nitrogen PSA unit for the requirement of Polyol Train-II Augmentation Plant.
- Implementation of complete pipes and Equipments and material handling as per the Piping Layout, Isometric, P & I drawing.
- Developed isometrics and BOM for the modification jobs of pipelines and documentation was done.
- Inspection of carbon and alumina balls topped up in the PSA unit.
- Involved in Prefabrication and Erection of Air Receiver for PSA unit.
- Inspecting the welder qualification and Involved in welding inspection (Penetration) for the pipelines.

Project : Column Erection and Tray Assembling
Responsibility :
- Implementation of complete pipes as per the Isometric, P & I drawing.
- Involved in Column erection as per Equipment drawing with the help of 80ton crane.
- Involved in temp plate prefabrication for the column.
- Erection of 13th sleeve trays as per the tray drawing.
- Inspection and commissioning was completed within the short time and hookup lines were connected to column after completion of the commissioning.
- Involved in safety valve erection.
Project : Propylene Oxide Augmentation Plant
(Project Value : Rs. 10 Crore)
Responsibility :
- Implementation of complete pipes and Equipments and material handling as per the Piping Layout, Isometric, P & I drawing.
- Implementation of complete life cycle of PO project from Project design phase and executing in the project.
- Execution of engineering components of project subject to budget, schedule and quality through the various phases of basic design, detailed design, construction, commissioning and start-up.
- Supervised mechanical design of facility, inspected layout, equipment arrangement and plant utilities.
- Designed specifications for equipment and purchased mechanical equipment as required in facility.
- Familiarity with pumps, valves, fittings and in line components.
- Ensured that all work was done in accordance to Local building codes and factory manuals.
- Prepared a list of equipments use in processes.
- Provided necessary support to manufacturing process, prepared plans to improve efficiency and reduced costs.

Project : HRT (High Rate Thickener)
Responsibility :
- Implementation of complete life cycle of HRT project from Project design phase and executing in the project.
- Involved in alignment of agitator and erection of platform.
- Monitored contractors to ensure timely and economic performance in accordance with company requirements.
- Supervised the installation/maintenance of newly installed equipments – Maintained the proper functionalities of machines and mechanical equipments such as pumps, gear box and agitator.
Maintenance :
- Coordinated maintenance issues with other departments to ensure preventive maintenance processes.
- Plant Engineer for the MOL Plant.
- Evaluated maintenance problems and resolved them.
- Familiarity with environmental and safety regulations related to mechanical maintenance activities.
- Good understanding of mechanical maintenance methods and procedures and standards.
- Fulfilled job duties and responsibilities effective and qualitatively.
- Involved in training the technicians, contractors in carrying out their assignment successfully.
- Handling man power & planning shift schedule.
- Supervision of day-to-day maintenance activities.
SAP Endure :
- Knowledge about the SAP works
- Knowledge about Service Order, Entry Sheet, SRS (Stores Requisition Slip), Purchase order, Stock overview.
In-plant training/Industrial visits :
- Undergone In-plant training in BHEL and KHIVRAJ MOTORS.
- Undergone Industrial visit in SIMPSON.
- Undergone project work in “DIAGNOSTIC AIDS FOR CONDITION MONITORING”.
- Undergone project work in “FIRE SAFETY IN PETROCHEMICAL INDUSTRY”.

Personal traits :
- Good communication skills.
- Ability to adapt to any kind of situation.
- Good team player.

I hereby declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.

Place : Chennai
Date : (S. Ragavendra Prasad)