www.jmdrailtech.com JMD Railtech Pvt Ltd Mumbai : Signal Design Engineer

[ijt.siva@gmail.com]

Position : Project Engineers Signalling
Location : Sydney and Delhi/Noida
Description : Deliver, Test and Commission Signalling Projects (IRSE Licence or suitable Rail Accreditations)

Positions : Signal Design Engineers
Location : Sydney, Perth, London, Manchester and York, Kolkata, Delhi/Noida and Mumbai
Description : Design Relay Interlocking / SSI / Microlok Circuits and/or Data, Signalling Plans with experience in Design Verification (Check 1 / Check 2) accreditations

Positions : General Manager
Location : Sydney and Delhi/Noida
Description : Mimimum of 15 years of railway experience in Signal Design / Testing & Commissioning / Project Management, Experience in RRI and PI / SSI / Microlok / Westrace, Extensive hands-on signalling experience, Significant Management experience, Results driven, competent and an excelelnt communicator with excellent written, computer and interpersonal skills, Ability to mentor others and lead the team

Position : Signal Electricians
Location : Sydney
Description : Licensed / Authorised Rail Signalling Electrician with Electrical Trade Certificate and significant knowledge and experience of working in rail signalling environment with ability to book out, disconnect, carry out alterations, reconnect, certify and book it back in for operational readiness.

Position : Electrical Mechanic / Wiring Persons
Location : Sydney and all over India
Description : Electrical Trade Certificate and significant knowledge and experience of working in rail signalling environment

Position : Apprentice (Signalling Electrical)
Location : Sydney
Description : High School Certificate with enrolment at TAFE to qualify as Electrician and interest of working in rail signalling environment

Position : Marketing Executive (Signalling)
Location : Delhi/Noida
Description : A highly self motivated, hard working, result oriented Science / Engineering / Commerce Graduate or MBA with 2 to 5 years experience. Should have excellent communication skills, must be proficient in written and spoken English.

Position : CAD Operators (AutoCAD and MicroStation)
Location : Delhi/Noida and Mumbai
Description : Candidates with 1-5 years of experience of converting engineering drawings in AutoCAD / MicroStation.
Candidate should be able to work independently and be able to coordinate the work with the design team in a teamwork environment.

Position : Testing & Commissioning Engineers
Location : Delhi/Noida
Description : Testing and Commissioning of Railway Signalling. Must have extensive experience of independent testing and commissioning and sound knowledge of design principles, standards, policies and procedures.

Position : Graduate Engineers
Location : Sydney, Delhi/Noida and Mumbai
Description : Degree / Diploma in Electrical Engineering with excellent communication skills, positive attitude and strong drive to learn and succeed

Position : Rail Planning / Scheduling Engineer / Manager
Location :Sydney
Location : Experienced and highly motivated Primavera P6 Planning Engineer / Manager with significant experience of scheduling multi-discipline construction projects, preferably rail projects with excellent presentation and effective communication skills and minimum of 5 years of experience of scheduling in construction / project management industry

Position : Administration Executive
Location :Sydney and Delhi/Noida
Description : Reception duties, proficient in MS Word and Excel, experience in HR and Accounts, highly motivated with positive attitude with ability to meet deadlines and coordinate with clients and project teams, ability to plan & organise with strong analytical skills, attention to detail, ability to work efficiently, unsupervised and work in a team environment

http://www.jmdrailtech.com/career.php

Contact Us :
JMD Railtech Pvt Ltd
103, Shri Ambika Darshan, Level 1
Chittabhai Patel Road, Kandivali East
Mumbai 400 101, India

[Guest]

Resume
GAURAV BHADRA
Address : Dombivli (West,) Thane
Email ID :gauravbhadra007 AT gmail.com

CAREER GOAL :
To work in a challenging and dynamic environment and keep adding value to the organization that represent and serve, to myself while concurrently upgrading my skills and knowledge.
SUMMARY :
- WORKED ON SCADA.
- Strong analytical and presentation skills.
- Basic knowledge of VLSI,VHDL.
- Pro-active, Dynamic, Optimistic and good Communication skills

INDUSTRIAL AUTOMATION EXPOSURE AT PRECON AUTOMATION & SYSTEMS PVT.LTD :
TRAINEE AUTOMATION ENGINEER certified by “PRECON AUTOMATION AND SYSTEMS PVT LTD.” An ISO 9001:2008 company..
SCADA : Wonder Ware’s INTOUCH
- Create New Application.
- Define New TAGS ANALOG/DISCRETE.
- Graphic Animation Linking TAGS with different Objects.
- Real Time Trends/Historical Trends.
- Alarms.

PLC’S : ALLEN BRADLEY(MICROLOGIX 1000, 1100, 1200, 1500 SLC 5/03) SIEMENS
- Basic ladder logic development.
- Practical knowledge of basic programming instructions.
- PLC wiring (sinking/sourcing) and I/O addressing.
- Fault finding in PLC Wiring.

HUMAN MACHINE INTERFACE(HMI) :
- Panel view 300 Micro.
- Creating Applications, Downloading/Uploading Program.
- Communication with PLC HMI.

MAJOR PROJECT :
SCADA IMPLEMENTATION FOR 220KV,110KV&33KV ELECTRICAL NETWORKS.
In Large Scale Industries there are difficulties in power transmission and distribution also growing demands for improvements in power quality, reliability and safety there was a need for automation. SCADA system provides solution for these problems. Hence to be in race with the current technology a retrofitting process was carried out at Tata Power, CARNAC receiving Station.
4-WAY ADVANCED TRAFFIC CONTROL SYSTEM.
It is based on Traffic control lights which can be implemented in several ways, the simplest of which is to use a Static timer-based state machine. While this method is easy to implement, we believe that offers significant advantages and performance improvement. We set out to design an Embedded controller that needs virtually no information about the intersection, yet still can optimally adjust its behavior to increase throughput.

EDUCATIONAL QUALIFICATION :
Specialization : Electronics Engineering from Shah & Anchor Kutchhi Engineering College, Mumbai University
Standard/Degree
Year Board
Agg.% Marks
B.E(Electronics)
2012
Mumbai University 64.45
Diploma
2009
MSBTE
77.00
SSC
2006
Mumbai University 69.46

TECHNICAL SKILLS :
Programming Languages known :-8085,8051,8086
- Having Work Experience on SCADA.
- Having basic knowledge of VHDL, VLSI.
- Worked as a Project Trainee in “ET&A Department” at TATA POWER co.ltd
- Prepared VENDING MACHINE USING VHDL.
- Sound Knowledge of Industrial Automation.

EXTRA CURRICULAR ACTIVITIES :
- Member of “Institute of Electrical and Electronics Engineers”, 2010-2011.
- Given voluntary service in Mobo Robo (robotics L1) as a part of NUCLEUS’11 – The Annual Technical Symposium, IEEE Sakec.
- Given voluntary services in “EXTACY” event as a part of VERVE’10 – The Annual Cultural Symposium.
- Participated in Robotics of Level L1 held at Thadomal Sahani college of Engineering.
- Participated in Robotics of Level L1 held at Ramrao Adik Institute of Technology.
- Won Volleyball competition held in college for continuous 3 years.

PERSONAL DETAILS :
Date of Birth :23’rd Dec,1990
Languages Known : English, Hindi, and Marathi & Gujarati.
Hobbies : Dancing, Listening music. Following Sports.
Expected CTC : As per Company Standards
Date :
Place :
GAURAV.P.BHADRA

[Guest]

Resume
RAJAT VERMA
NOIDA
E-mail : rajatverma.agra AT gmail.com

CARRIER OBJICTIVE :
A responsible and challenging position that will allow to me to explore my abilities ,skills and sense of dedication towards my duties with a sole aim of seeing the progress of the organization needs with the changing global scenario.

SKILLS & Experience :
1 Year of total work experience.
** Good Analytical ability and Self Confidence.
** Fast learning attitude.
** Ability to organize and work in a team
** Ability to effectively work under adverse situation with diverse groups.
** Dedicated and committed.
** Strong attention to Details.
** Coordinate with the office staff.

ACHIEVEMENTS :
** Participated in Social Work for Rural Development
PROFESSIONAL EXPERIENCE :
** Worked with Anee Creation from Feb 2011 to Dec.11.
** Working with Edu Cadd from Jan 2011.
PROFESSIONAL COURCES :
** Computer Course from Rajeev Gandhi Computer Education Center AGRA.
** AutoCAD from CADD Center AGRA.
** Staad pro CAD DESK.

PROFESSIONAL QUALIFICATION :
** Diploma in Civil from Baba Sahab Ambedkar Polytechnic Agra .
ACADEMIC QUALIFICATION :
** Senior Secondary from CBSE Board.
** Higher Secondary from CBSE Board.
TECHNICAL KNOWLEDGE :
** Possess good knowledge of Microsoft Technologies** MS Office
** Complete knowledge of Internet and its applications.
** Operate window XP, coral draw

PERSONAL DETAILS :
Date of Birth : 12.Apr.1992
Marital Status : Unmarried
Religion : Hindu
Language : English, Hindi
Address : Firozabad. 283203
Date :
Place :
(Rajat Verma)

[Guest]

RESUME
FUZAIL AKHTAR KHAN
MICROSTATION CADD OPERATOR (CIVIL/ELECTRICAL)
fkfuzail2 AT gmail.com
Present Address : Jamia Nagar, New Delhi110025.

Summary & Objectives :
Having 7 years of experience in the Drafting, Designing & Detail Engineering of Civil Construction works (Buildings) Floor plans, Elevations, Reflected ceiling plans, Wall Elevations etc. Specification in 132kV underground route layout from one Substation to another Substation in different organization.
Technical Qualification :
Trade Course In Draughtmanship on 16th August 1999.
Professional Qualification :
National Institute of Engineering & Technology.
Diploma in Civil Engineering on 27th October 2006.

Professional Experience :
Organization : Lahmeyer Int India Pvt Ltd. Gurgaon
Position : Micro station CAD Operator
Period : Since April 2012 till date.
Job Responsibilities : Client – Saudi Electricity Company (KSA)
Preparation of Cable Tray & Cable Trench Layout, Earthing Layout, Lighting Protection Layout (All Layouts with sections & elevations).
Control Room Layout & Tray Routing in Control Room
Preparing General Arrangement drawings for Panels & Transformers.
Key SLD, Power Distribution Diagrams, Metering & Protection Diagrams, Schematic Diagrams etc.

Organization : Centaur ElectroMechanical Contracting L.L.C Dubai, UAE
Position : Micro station CAD Operator
Period : Since August 2007 to July 2010.
Job Responsibilities : Client – Dubai Electricity & Water Authority.(DEWA)
Preparing of proposed 132kV Cable Route layout from one Substation to another Substation.
Coordinating work with surveyor & site engineer regarding existing cables, manholes, water pipes and various other services comes in a route during excavation.
Preparation of drawing for Directional Drilling of 132Kv cables for road crossing according to ROW(Right Of Way) given by RTA (Dubai).
Preparation of proposed profile drawing such as Road Level , Trough Level & Ground Level and various other details are shown in profile .
Discussions of 132Kv Cables & FO Cables diversion works with main contractor’s engineers & surveyor.
Traffic diversion drawing is also to be prepared for taking existing levels.
Soil Test reports are shown from route starting to route end
After completion of site works As built drawing are prepared as per site condition & As built survey data.
Also familiar with 11Kv route drawing from one Substation or Joint to another.

Organization : Saad Trading & Contracting Co AlKhobarK.S.A
Position : Structural Cad Operator (Micro station Cad)
Period : May 2004 to July 2006
Job Responsibilities :
Preparation Of Various Types Of Layout Drawing such as Foundations, Columns, Beams, Slabs and Staircase Layouts and Preparation Of Rein Forcemeat Drawing as Well.
Coordination With Other Department Like H.V.A.C , Mechanical & Electrical Services To Locate Opening And Sleeves As Per Design Requirements
Preparation of AsBuilt Drawing As Per Site Revision and changes
Drawing to be revised as per changes in Architecture
Preparation Of AsBuilt Drawing as per measurement of existing site.

Organization : Shapoorji Pallonji & Co.Ltd.(India) Engineers & Contractors
Position : Cad Operator
Period : Oct 1999 to April 2004
Job Responsibilities :
Preparation of basic architectural and structural drawings layouts.
Drawing correction to be made as per designer’s comments.

Computer Skills : Microsoft Word, Excel, Auto Cad 2000
: Micro station Version 7,8 & XM.
: Microsoft Office XP Professional & Windows Vista
Training & Work :
Four Weeks Traning In “Mechanical Cadd” Development on the Drawing.
Strength :
Confident and open to new ideas and learn new things and implement them.
Can get along well with people and adjust to new environments easily.
Good Communicator.
Willing to learn.
Excellent people management and Team building skills.

Personal Details :
Father's Name : Sohrab Khan
Date of Birth : 05May1980
Marital Status : Married
Nationality : Indian
Languages Known : English and Hindi.
Driving License : Holding India Driving License
Permanent Address :
Jamshedpur 831004.
JHARKHAND
Declaration :
I here by certify that all the above information provided by me is true to the best of my knowledge.
Fuzail Akhtar Khan

[Unregistered]

M.Uma maheshwaren
mumamaheshwaren AT yahoo.in

PROFESSIONAL COMMITMENTS :
To contribute my experience and knowledge in Railway signalling to the organization, This includes analytical and technical expertise in the fields of Railway Signalling.

EXPERIENCE SUMMARY :
Basic appreciation of Railroad signaling principles, Interlocking concepts and various customer’s standards and practices.
Having 31 years of experience in Railway Signalling for maintanence and Construction.
Exposure in Relay Interlocking, Maintainance, installation and testing of Indoor and Outdoor Signaling gears for Indian Railways.
Exposure in Panel Interlocking and Route Relay Interlocking Designs for Indian Railways
Possess excellent interpersonal, communication and organizational skills.

ACADAMICS :
B.Sc (Physics) (1st CLASS) -Madras university.

COMPUTER LITERACY :
Diploma in computer applications & office Automation.
Auto cad at CAD CENTER.

ACHIVEMENTS :
Obtained Best worker Award from Indian Railways (DRM & CAO & CSTE award).

WORK EXPIRENCE :
FROM MO YR SECTOR/BUSINESS UNIT POSITION TITLE /JOBTITLE Oct-2010 To Till Date Indian Railways, Southern Railway CAO /CN /MS Senior Section Engineer / Signal / Construction .
Role and Responsibilities include :-
I am execute ENNORE – ATTIPATTU 3 rd &4 th line work (Distribution version SSI) and VPY & ENR Yard modification work From RRI to EI .

The above works I am prepare schedule for signalling work also prepration of cable plan, power distribution plan, bonding plan, Location plan and material requirement for the above work.
July – 2006 To Oct-2010 Indian Railways, Southern Railway CAO /CN /MS JE/ Signal / Construction
Role and Responsibilities include :-
I am execute & commissioned TIRUVARUR – NAGORE Gauge conversion work and NAGAPATTINAM – VELANKKANI new line work and BPAC work from MAYAVARAM to KUMBAKONAM.

The above works I am prepare cable plan, power distribution plan, bonding plan, Location plan and material requirement for the above work also signal & location marking given to the contractor to execute the above work and bell tested the route relay circuts & out door circuts .
After CRS Inspection commissioned the above stations to puplic traffic maintained the above stations for failure free.
Mar-2003 To Feb – 2006 :
Indian Railways, Southern Railway CHENNAI DIVISION Master crafts man/ signal
Role and Responsibilities include :-
. Special Maintenance works which consists as follows.
Joint works with engineering Department which involves replacement of Block joints, points and adjustments, track bonding, Attending Officers inspection notes, cable meggaring, cable laying and terminations, focusing of signals etc.

Aug-1986 To Mar-2003 :
Indian Railways, Southern Railway CHENNAI DIVISION
Electrial signal maintaner-1
(Indian Railways, Southhern Railway) Chennai Division.
Role and Responsibilities include :-
Special Maintenance works which consists as follows.
Joint works with engineering Department which involves replacement of Block joints, points and adjustments, track bonding, Attending Officers inspection notes, cable meggaring, cable laying and terminations, focusing of signals etc.

Aug-1984 To Aug-1986 Indian Railways :
Southern Railway CHENNAI DIVISION Electrial signal maintaner-11
(Indian Railways, Southhern Railway)
Chennai Division.
Role and Responsibilities include :-
Responsible for the maintenance of route relay interlock station & auto section which includes the following mentioned gears below.

Maintenance of route relay interlocked stations of Tiruvattiyur and Tondiarpet which consists of,
GRS 5E point machines,
DC Track circuits
Secondary cells
CLS Signals
Shunt Signals

TRAINING :
Jan-1983 To July-1983 Indian Railways,
Southern Railway
Signal & telecommunication training centre Podanur.
Six months Initial Inhouse Training.
Training consists of
Basic concepts of railway signaling
Relays
Track circuits
Block instruments (Token and Token less)
Power signaling
Orthodox signaling
Electro Mechanical signaling

Aug-1983 To Aug-1984 :
Indian Railways, Southern Railway Chennai Division
One year field training at various stations of Chennai division.
Training consists of
Field training in Electro Mechanical Signaling
Field training in Panel interlocking stations
Field training in route relay interlocking stations.
Field training in Auto sections.

Mar2006 To June-2006 :
Indian Railways, Southern Railway
Signal & telecommunication training centre
Podanur Four months Inhouse Training.
Training consists of
Prepration of signaling plan
Prepration of table of control
Designing of signaling circuts
Staff management
Material management
Labour rules

PERSONAL PARTICULARS :
Name : M.UMA MAHESHWAREN
Date of Birth : 22 Jan 1962
Marital Status : Married
Gender : Male
Languages known : English, Tamil.

DECLARATION :
I hereby declare that the above furnished details are true to the best of my knowledge and belief.

M.UMA MAHESHWAREN

[Unregistered]

I have Diploma in Electrical Engineering and also Fresher. Can I get a job from you?

[Unregistered]

MICROSTATION CADD OPERATOR (CIVIL/ELECTRICAL)
FUZAIL AKHTAR KHAN
fkfuzail2 AT gmail.com

Summary & Objectives :
Having 7 years of experience in the Drafting, Designing & Detail Engineering of Civil Construction works (Buildings) Floor plans, Elevations, Reflected ceiling plans, Wall Elevations etc. Specification in 132kV underground route layout from one Substation to another Substation in different organization.

Technical Qualification :
Trade Course In Draughtmanship on 16th August 1999.

Professional Qualification :
National Institute of Engineering & Technology.
Diploma in Civil Engineering on 27th October 2006.

Professional Experience :
Organization : Lahmeyer Int India Pvt Ltd. Gurgaon
Position : Micro station CAD Operator
Period : Since April 2012 till date.
Job Responsibilities : Client – Saudi Electricity Company (KSA)
** Preparation of Cable Tray & Cable Trench Layout, Earthing Layout, Lighting Protection Layout (All Layouts with sections & elevations).
** Control Room Layout & Tray Routing in Control Room
** Preparing General Arrangement drawings for Panels & Transformers.
** Key SLD, Power Distribution Diagrams, Metering & Protection Diagrams, Schematic Diagrams etc.

Organization : Centaur Electro-Mechanical Contracting L.L.C Dubai, UAE
Position : Micro station CAD Operator
Period : Since August 2007 to July 2010.
Job Responsibilities : Client – Dubai Electricity & Water Authority.(DEWA)
** Preparing of proposed 132kV Cable Route layout from one Substation to another Substation.
** Coordinating work with surveyor & site engineer regarding existing cables, man-holes, water pipes and various other services comes in a route during excavation.
** Preparation of drawing for Directional Drilling of 132Kv cables for road crossing according to ROW(Right Of Way) given by RTA (Dubai).
** Preparation of proposed profile drawing such as Road Level , Trough Level & Ground Level and various other details are shown in profile .
** Discussions of 132Kv Cables & FO Cables diversion works with main contractor’s engineers & surveyor.
** Traffic diversion drawing is also to be prepared for taking existing levels.
** Soil Test reports are shown from route starting to route end
** After completion of site works As built drawing are prepared as per site condition & As built survey data.
** Also familiar with 11Kv route drawing from one Substation or Joint to another.

Organization : Saad Trading & Contracting Co Al-Khobar-K.S.A
Position : Structural Cad Operator (Micro station Cad)
Period : May 2004 to July 2006
Job Responsibilities :
** Preparation Of Various Types Of Layout Drawing such as Foundations, Columns, Beams, Slabs and Staircase Layouts and Preparation Of Rein Forcemeat Drawing as Well.
** Coordination With Other Department Like H.V.A.C , Mechanical & Electrical Services To Locate Opening And Sleeves As Per Design Requirements
** Preparation of As-Built Drawing As Per Site Revision and changes
** Drawing to be revised as per changes in Architecture
** Preparation Of As-Built Drawing as per measurement of existing site.

Organization : Shapoorji Pallonji & Co.Ltd.(India) Engineers & Contractors
Position : Cad Operator
Period : Oct 1999 to April 2004
Job Responsibilities :
** Preparation of basic architectural and structural drawings layouts.
** Drawing correction to be made as per designer’s comments.

Computer Skills :
Microsoft Word, Excel, Auto Cad 2000
Micro station Version 7,8 & XM.
Microsoft Office XP Professional & Windows Vista

Training & Work :
** Four Weeks Traning In “Mechanical Cadd” Development on the Drawing.

Strength :
** Confident and open to new ideas and learn new things and implement them.
** Can get along well with people and adjust to new environments easily.
** Good Communicator.
** Willing to learn.
** Excellent people management and Team building skills.

Personal Details :
Father's Name : Sohrab Khan
Date of Birth : 05-May-1980
Marital Status : Married
Nationality : Indian
Languages Known : English and Hindi.
Driving License : Holding India Driving License

Declaration :
I here by certify that all the above information provided by me is true to the best of my knowledge.
Fuzail Akhtar Khan