Norwegian Engineering & Consulting NECON : Mumbai, Kuwait, Norway : Hydraulic Design Engineer

[Admin]

Norwegian Engineering & Consulting (NECON)
http://www.necon.co

Keywords: AutoCAD, Schematics.

Designation: Hydraulic Design Engineer
Experience: 5 - 10 Years
Location: Mumbai,
Kuwait, Norway
Compensation:
Rupees 5,00,000 - 12,00,000
Education: UG - B.Tech/B.E. - Marine, Mechanical
PG - Any PG Course - Any Specialization,Post Graduation Not Required
Industry Type: Oil and Gas/ Power/Infrastructure/Energy
Functional Area: Engineering Design, R&D
Posted Date: 06 Nov 2008

Job Description
- Independently design hydraulic systems for hydraulic machinery.
- Familiar with components available for hydraulic systems.
- Make AutoCAD schematics/flow diagrams of hydraulic system.
- Make flow/pressure calculations for a hydraulic system.

Desired Candidate Profile
Should have an experience in offshore industry and Marine industry.

Company Profile
NECON AS is a supplier of competence services to the oil & gas industry and other industry segments. The Company has strategic plans for further growth and establishments. The market has a demand for NECON's services, and the Company experienced the best growth in the market for 2006. NECON consists of 280 engineers and co-workers.

Executive Name: Inger Reime

Address:
Not Mentioned

Email Address: india@necon.no

Telephone: Not Mentioned

[Guest]

Hi
This is Ashish Ragtah

[Guest-IJT]

Name : Varadha Gokula Kishnan
Email : nvgk1975 AT gmail.com
Designation / Skillset : Senior Engineer / Maintenance & Project engineering / maintenance , Project managment
Dear Sir,
I am a mechanical engineer 13 years of valuable experience in Maintenance, Project Management as well as Installation & Commissioning with reputed companies. I was with Sony Electronics (Singapore) Pte. Ltd., Singapore as Senior Equipment Engineering. During my turner I have lead & member of Battery line set up in Singapore.
I am now targeting to bring my well-honed skills in Project Management, Installation &Commissioning, Maintenance, Budgeting &Equipment Design to succeed in senior level positions. I have experience in many green field projects, new product launch & Productivity improvement project.
Total Year Exp. : 13+ years

Current location : Chennai
Current Employer : Sony
Current Designation : Senior Engineer
Notice Period : Immediate
Highlights of experience and demonstrated talent I would bring to your organization include :
- Transferred technology &contributed in the line set-up and process conditioning within the target time of 3 months.
- Successfully increased Assembly Line Equipment Productivity from 65% to 89% within 1 year from startup (This being a record amongst Sony Energy Companies Worldwide).
Your time and consideration in reviewing my credentials are appreciated. I believe my knowledge and skills will bring value to your organization and would welcome the opportunity to meet, discuss and explore the possibilities of the same. I can be reached at the numbers listed below.
Thanking you.
Sincerely,
N. Varadha Gokula Krishnan


Resume :
N. Varadha Gokula Krishnan
________________________________________

Maintenance & Operations/Project Management (Greenfield & Brownfield)/ Engineering Services
Offering an impressive multi-faceted experience of over 13 years in delivering optimal results and business value in demanding deadlines
Profile
- Highly accomplished and technically empowered professional with incredible experience acquired over the years in diverse areas of Project Management, maintenance & operations of a variety of utility machineries, routine overhauling, servicing, erection & commissioning of hydraulic & mechanical systems, Value-Engineering, Continuous Improvement, and quality, etc.
- Demonstrated capability in implementing preventive, planned, predictive and corrective maintenance to maximize uptime of equipments and installations, significant experience in maintenance of Rotating machinery such as pumps, Compressors etc; Hydraulic & pneumatic components; Material handling device such as conveyors, Pneumatic conveying, Special Purpose machinery, & PLC based machineries
- Developed capabilities in conducting feasibility studies for Greenfield & Brownfield projects, functional designing of the new plants, technology transfers and selection of automation systems for the units; Procurement & Commissioning of Capital Machinery & Equipments, Continuous Process Management & Enhancement, Technology Integration and Capital Budgeting & ROI..
- Understanding of the TQM, Kaizen, ISO & Industrial Standards and Safety Norms (EHS - Environment, Health & Safety), while commissioning projects; demonstrated capability in conceptualizing and effecting process initiatives to enhance efficiency
- Commendable experience in developing cutting edge technological solutions for the green field & brown field projects; experience in coordinating with various Authorities & Agencies for statutory compliance & clearances
Key Strength Areas
Plant Engineering / Maintenance ~ Project Management / Commissioning ~ Resource Management / Optimization
Technology Transfers ~ Safety Auditing ~ Techno-commercial Operations ~ Quality ~ Plant Safety & Operations
Vendor Relations ~ SOP Preparation ~ General Administration ~ Cross-functional Coordination
Professional Experience and Accomplishments
Sony Electronics (Singapore) Pte. Ltd. Energy Technology, Singapore Dec 2004 – Jan 2011
Senior Equipment Engineering
Accountabilities
- Manages the line maintenance, projects, and departments including spare parts, inventory, budget, and compliance with environmental and safety regulations.
- Led a team of five engineers for executing project management, maintenance plan and improvement projects; collaborated with cross function team from process & product department during process conditioning & new product launch
- Played an important role in devising and executing the preventive maintenance schedule & predictive maintenance to achieve maximum machine availability by incorporating principles of TPM, Kaizen (Continuous Improvements) and GENRYU (Source cause analysis) philosophy
- Modifying equipment to accommodate wide horizon of battery models in very vibrant and dynamic business environment; managing vendor in cooperation with procurement right from vendor evaluation, specification preparation and quality checking.
- Managing project for new line & new product introduction in fastest time & lowest budget.
- Involved in mentoring Project Engineers in leading & completing ECN ‘Engineering Change Notice’, DOE “Design of Experiments’, Safety Audits & FMEA
- Overseeing technology transfer of battery manufacturing technology from Japan to Singapore. Localization of parts in Singapore.
Attainments
- Transferred technology & contributed in the line set-up and process conditioning within the target time of 3 months.
- Successfully increased Assembly Line Equipment Productivity from 65% to 89% within 1 year from start up (This being a record amongst Sony Energy Companies Worldwide).
- Executed the concept of floating maintenance to effectively increase production time by conducted regular petrol check, analysing all the machinery variation & grading them based on machine condition & quality impact. Analysed proper counter measure, judge timing of each activity & grouping activity thus effectively using time & manpower.
- Conceptualised and implemented the use of x- ray in cell evaluation for finding the position of soshi (raw cell) inside the pack which gives the data based damage evaluation & clear correction procedure.
- Worked with process in controlling of Implosion of vacuum CRT from 0.8 to 0.02% of rejection by modification in cooling booth. This was achieved by studying air flow & temperature impact on CRT based on the result the air blow system was redesigned & process control changed.
- Pivotal in reducing time of model change by 30% by reducing the number of model change parts and procedure.
- Localised forming die set & heater block special coating which reduced the cost by 23% & reduced lead time by 40%.
- Established formula based design concept for tooling part design, which helped in effectively reducing design time from 25 man-days to 12 man-days.
- Holds the distinction of reducing index from 9.1s to 8.9s for Cathode Ray Tube Manufacture increasing daily output by 2.2%. This effective reduction was by studying the entire process flow, identifying the bottle necks & elimination of bottle neck in line as well individual station.
- Served as Leader in Equipment Safety Committee during the transformation of CRT line to battery line online. With effective hazard identification, safe work procedures & vendor safety briefing we had Zero accident during the entire phase.
Computer Graphics Ltd., Chennai Mar 2002 – Nov 2004
Maintenance Engineer
- Successfully led and managed a team of Mechanical Technicians and worked with Electronic Engineers to perform maintenance work as stipulated by KONICA Corporation
- Successfully handled maintenance of Hydraulic & Pneumatic Components and special purpose machines such as Inner Packing (Hitachi), Outer Packing Machine (Pam Pac), Auto Collating & Wrapping Machine (sub nil) and Slitting Machine (Dusenbery)
- Successfully managed & executed an automation project of Patron Conveyor & Spool Feeding System
- Re-started an inner packing machine fitted with most parts localised in India
Ramco Industries Ltd., Arakonam, Tamil Nadu Aug 1998 – Mar 2002
Maintenance Engineer
- Led a team of Mechanical Technicians to executed Corrective & Preventive Maintenance Jobs, and Erection & Fabrication works.
- Successfully handled various equipments like hydraulic machinery (Power Pack, Circuits, Valves); Pumps (water, oil& slurry); Compressors (Screw, Reciprocating W& Horizontal); Refiners, conveyors (Belt, Screw, Bucket elevators), Pneumatic conveyors, E.O.T, fork lift etc.
- Executed a variety of project including
- Fabrication & Erection for Sri Lanka Plant 1 & 2
- Installation of Calcium Silicate Sheet Plant, Automatic Weight System for discharge of cement and fly ash
- Fabrication of automatic bag opening device
- Erection of automatic re-circulation tank for waste slurry circulation, bay heaters and automatic waste sheet re-circulation
- Managed project operations for conversion of semi-automatic trolley handling to fully automatic trolley handling systems using PLC.
- Reduced down time of slurry pumps & pipe blockages by Installing Stand-by pumps & parallel pipes for carrying slurry.
- Handled Implant development of Backwater pump
- Designed a uniform base for different types of gearbox
Imperial Granite Ltd. Nagari, A.P. Jan 1997 – Aug 1998
Engineer Trainee (Mechanical)
- Involved in servicing special purpose machines gang saw, block cutting & tile polishing M/c, boom crane, turn tables, automatic stacking systems, etc
- Executed variety of projects including
- Installation of miniature tile plant and stretch-wrapping machine
- Power Auditing Project
- Reduction of Raw material conception
Academic and Professional Credentials
MBA (Finance), 2007
Sikkim Manipal University (Distance Education)
Post Graduate Diploma in Operations Research, 1997
Pondicherry University
B.E. (Mechanical Engineering), 1996
Adhiparasakthi Engineering College, University of Madras
Secured 73%
Computer Proficiency
- Working knowledge of AutoCAD, MS Project and MS Office
- Basic knowledge of PLC Programming and Robotics
Certifications / Other Courses
- Completed certification course in PLC from CPT, Chennai in 2002.
- Sony Six sigma.
- Completed a course in CAM from Anna University, Chennai in 2002

References & Supporting Documents Available upon Request
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4392049
Date & Time : 20th Jul 2011 10:54 AM (UTC)
IP Address : 117.193.143.27
Browser Info : Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; MAAU)
Predicted Country []: India

[Guest]

SRINIVAS ACHARYA
Email : acharya_sri AT yahoo.co.uk
WORK EXPERIENCE :
Total … 40 years
Industry … Cement & Material Handling, also Gen. Engineering.
SKILL INFORMATTION :
Education … Diploma in Mechanical Engineering ( D.M.E.) – 1969
Higher education … B E / B TECH , ( Mechanical ) FINAL YEAR
EXPERIENCE :
10) Duration
Company
Position
Description 28/01/2005 to Working
BEVCON WAYORS PVT LTD,HYDERABAD - INDIA
TECHNICAL SUPPORT --DESIGN ENGINEERING & PURCHASE
- MH Projects — Co-ordinator,Lead,Checker & Verifier
- Project design of Material Handling Systems – Clients frontier.
9) Duration
Company
Position
Description 28/01/2003 to 17/01/2005
ACC RCD EMD – MUMBAI - INDIA
DY DESIGN MANAGER
- In charge of MH bought outs Design office.
- Project design of Material Handling Systems
8) Duration
Company
Position
Description 08/03/2000 to 06.12.2001
COBIT ENGG(P) LTD – MUMBAI - INDIA
DESIGN MANAGER
- In charge of Design office
- Project design of Material Handling Systems
7) Duration
Company
Position
Description 26/04/1993 to 13/02/1999
ARAB CEMENT CO. LTD - LIBYA
MECHANICAL ENGINEER (DESIGNS)
In charge for Cement Plant Drawing office, Designs and Planning
6) Duration
Company
Position
Description 29/01/1992 to 26/03/1993
PMF ENGINEERING LTD-HYDERABAD-INDIA
MECHANICAL ENGINEER (DESIGNS)
Material Handling Machineries Designs and Estimation for Tenders
5) Duration
Company
Position
Description 26/10/1991 to 13/01/1992
ALBALHA TRADING AND MARKETING – SAUDI ARABIA
MECHANICAL ENGINEER (PLANT)
Plant In charge. CCR Operation, Loading and Administration
4) Duration
Company
Position
Description 06/03/1988 to 07/08/1988 (During Alumunium Industries Service)
MUTTANNA CEMENT PLANT, SAMAWA-IRAQ
MECHANICAL ENGINEER(DESIGNS)
Cement Bag Handling system - Project Engg and Erection
3) Duration
Company
Position
Description 23/12/1978 to 26/11/1991
THE ALUMINIUM INDUSTRIES, HYDERABAD-INDIA (MH DIV)
MECHANICAL ENGINEER (DESIGNS)
Material Handling – Project Engineering
2) Duration
Company
Position
Description 10/04/1972 to 20/12/1978
ACC-VICKERS AND BABCOCK LTD-SHAHABAD-INDIA
MECHANICAL DRAUGHTSMAN (DESIGNS)
Cement Machineries, Designs and Drawings
1) Duration
Company
Position
Description 15/12/1969 to 06/04/1972
CEMENT CORPORATION OF INDIA LTD-KURKUNTA-INDIA
MECHANICAL DRAUGHTSMAN (DESIGNS)
Project Design and Planning of Cement Plants