Kentz Engineering Qatar : Instrumentation & Control Engineer

[Admin]

Kentz Engineering
http://www.kentz.com

Designation: Instrumentation & Control Engineer
Experience: 10 - 20 Years
Location: Qatar

Job Description
10+ years Experience in the execution of EPC or Turkey Projects related to the Oil and Gas and/or Power Industry with both design office and site experience

Desired Candidate Profile
Experience in the execution of EPC or Turkey Projects related to the Oil and Gas and/or Power Industry with both design office and site experience. Indepth knowledge of principles/ theory of field instrumentation and control engineering.Ability to execute all works inline with Client and Company HSE and QA policy & procedures.

Company Profile
Kentz Engineers & Constructors have been in the construction business for almost 90 years, operating in over 20 countries world-wide with a turnover of approximately $600 million. We provide a full range of technical and project management skills, from design through procurement, construction, commissioning and start-up to assist world-wide clients in developing and upgrading facilities.

Address:
Shop No 14, Whispering Palms Shopping Centre
Lokhandwala, Kandivali (E0
Mumbai,Maharashtra,INDIA 400101

Email Address: coordinator@ipspl.com

Keywords: Instrumentation & Control Engineer

[Guest]

Jaril James
Email Id : jariljames AT gmail.com

Objective :
Intend to be part of a company where I can use my potential to the full to help in the achievement of organizational goals and improve my technical skills.

PROFESSIONAL WORK EXPERIENCE :
1. Organisation : M/s Middle East Control Services
Place : Dubai, United Arab Emirates
Designation : Instrumentation Engineer

Project : Jet A1 Fuel Hydrant EFSO & Leak Detection Monitoring, Jet A1 Fuel Farm.
Customer : M/s Department of Civil Aviation – Government of Dubai
Consultant : Dar AlHandasah
Plant : Jebel Ali International Airport City – Phase 1A
Scope : Design, Engineering, Supply, Installation, Testing & Commissioning of Electrical, Instrumentation & Control System package

2. Organisation : Neyveli Lignite Corporation Ltd. (Thermal Power Plant)
Place : India.(Govt. of India)
Designation : Instrumentation Engineer
Total Power production : 2490 MW
Plant : Thermal Power Station – 1 .
Work Nature :Maintenance of process field Instruments and DCS control system.

Academic Profile :
Details School/ College %
10th Govt. Higher Secondary School, Kodungallur (Kerala Board) 84%
PreDegree Christ College, Irinjalakuda (Calicut University) 68.8%
Bachelor of Technology –B.Tech[Electronics & Instrumentation](4 years) KMEA Engg. College Aluwaye (M G university) 68.1%

Job profiles :
Middle East Control Services :

Review of engineering deliverables such as Control System Architecture, PLC I/O scheduling, Cause & Effect Matrix, functional design specification (FDS), Factory/Site Acceptance Test (FAT/SAT) document, PLC wiring drawing, instrument datasheet, cable schedule, interconnection drawings, etc

Can develop construction drawings like cable route layouts, instrument installation drawings, hook up drawings, instrument Junction box layout & termination drawing, loop wiring drawings, etc., as per project requirement.
Involved in sending RFQ’s , Preparation of Material Orders, follow up of enquires, technical & commercial evaluation and procurement of I&C equipments

Prepare spare parts and consumable list for all I&C and procure them promptly to support preventive maintenance
Carry out inspection in co ordination with client for field instrumentation & control system for handing over
Prepare Closeout documents such as Operation & Maintenance Manual, Training manual..

Technical Responsibilities Onsite :
Familiarity in Safety Rules and Regulations and job permit systems for the plants executed
Checking QA/QC documents as per project requirement which are received from the supplier for the procured instruments.
Coordination with client for inspection of field instruments, PLC panels, Fibre optic
system after completion of installation & testing activities
Maintenance and Troubleshooting of Field Instrument in loop during precommissioning

NEYVELI LIGNITE CORPORATION LTD. :hermal power plant ,Tamil nadu – India
Maintenance of process field Instruments and DCS control system(Honey well)
Involved in Erection, Commisioning of Burner Management System (BMS) by Siemens.
Boiler,turbine,generators operations.
Calibration of transmitters, thermocouples, rtd’s, control valves, dampers
Testing of cables,panels,junction boxes.
Operation of SOV’s (solenoid valves), limit switches, flow meter, Smart Pressure transmitter
Special instruments like eddy current pickups & stroboscope for speed m/m, vibration pickups(seismic mass) & enpac ird for vibration m/m.
Stack analysers SPM (solid particle m/m), SO2 , CO2, NO analysers
Ignitors, Scanners for BMS

Technical Profile :
Industrial Activities :
Tata Honeywell Automation India ltd. and Rashtriya Chemicals & Fertilizers Ltd. :
Training on DCS, PLC & SCADA System. I have learned DCS, PLC Architecture; their applications.
Worked on their software, PLC ladder logic diagram
Kochi Refineries Ltd. :
Have visited the plant and understood concept of different petroleum products, water.
Malabar cements Ltd., Walayar :
Industrial Training Studied about the cement manufacturing process PLC ladder logic building. Study of the conveyor buckets carrying limestone from mines, conveyer belts, mixing section, electrical section, manufacturing section, rotary kiln, control station, packing section.

Software Known :
Auto cad
INTOOLS software
MS Office
Internet Explorer
Operating platforms – Windows XP Professional, Vista

Mini Project :
SMART ROOM (Automatic control of rooms)
I have designed the programming logic of the working of Smart Room, which consists of an Automatic Light/ Fan controller, Bi counter and burglar alarm Directional Visitors

Main Project :
Pollution Control in cement industry (Malabar cements Ltd. Palghat, Kerala)
Familiar with cement manufacturing process and various electromechanical devices with which the pollution is controlled.

Seminar :
Have presented a paper on Atomic Force Microscope (NANO Technology), explained its working & advantages.

Other Activities :
Small Electronic Projects

Personal Profile :
Father’s Name : M C James
Sex : Male
AGE : 26 Yrs
DOB : 05th June 1983
Nationality : Indian
Religion : Christian
Visa Status : Residence Visa(transferable)
Passport No. : F 9658292
Languages Known : English, Hindi, Malayalam and Tamil.
Personality Traits : Confident, Helpful, Hardworking & Creative
Hobbies : Drawing, Painting, Playing Chess

DECLARATION :
I consider myself familiar with Electronics & Instrumentation Engineering Aspects. I am also confident of my ability to work in a team.

I hereby declare that the information furnished above is true to the best of my knowledge.

JARIL JAMES

[Guest Poster]

RESUME
Rakesh Kumar Vishwakarma
E-mail : rakesh_ei07 AT yahoo.com
: rakesh.soma AT indiatimes.com

2 years Experience in Soma Enterprise Ltd at Plant Section

OBJECTIVE :-
I want to work in an organization where I can explore my technical knowledge & skills for the betterment of society & that organization.

Work Experience : 2 Years
Education : B.E. with Electronics and Instrumentation Engineering
Current Location : Punjab
Current Salary : 2.85 lakhs per annum.

Technical Qualification :-
B.E. in Electronics and Instrumentation with 70% from Rajiv Gandhi Technical University, Bhopal

Academic Qualification :-
Higher Secondary School with 63.3 % from MP Board Bhopal
High School with 73.3% from MP Board Bhopal
Operating System : WIN 98, 2000, XP, VISTA
Programming Language : C++, Basics of VB and DOS

WORK EXPERIENCE :-
CURRENT JOB PROFILE :- May 2009- Till Continue
Company Name : Soma Enterprise Ltd, Phagwada
An ISO 9001 Company
Designation : Engineer

Profile : Maintenance of Plant and Process Control
with mechanical problems. Responsibility of
Reducing Fuel consumption with high rate
Production.

November2007 to May 2009

Company Name : Soma Enterprise Ltd, Udaipur
An ISO 9001 Company
Designation : Graduate Engineer Trainee
Profile : Maintenance of Plant and Process Control ,
Industrial automation, All types of Sensors
and Transducers.

Work Experience in Following Automation Plant :
Under myself responsibility of 160 TPH Hot Mix Plant and 200TPH Wet Mix Plant has been installed and commisioned at present location. Operation and maintenance of all equipment at site.
Full competent in managing plant staff and handling entire mechanical problems. This includes any types of electrical problems or any pneumatic or sensors fault or deadlines in terms of process control and timing of delivery of orders sites requirement of mix. I possess highly self motivation and aggressive execution capability.
Knowledge of all types of automation control and industrial sensor. There are different companies provide the plants set as Linnhoff Technology Singapore, Lintec Group, Apollo Technology Gujrat. Siemen India Pvt Ltd. Working with PLC control and fully supporting about Mechanical and electrical part.

Industrial Training :-
MECHANISM OF CONTROL AND POWER PLANT AND PACKAGING CONTROL

Minor Training :
During training time I got an experience as practical detail study of machines and different types of sensors. There is used many Equipments and learn all the work of automation field.
Place : CEMENT FACTORY Sarla Nagar,Maihar (M.P.) Duration : 11 days.

SWITCHING TECHNIQUE IN TELECOMMUNICATION DEPARTMENT
Major Training :
During training I have experienced with practical as well as theoretical work of Data Communication and here study about the analog and digital signals.
Place : BSNL Arera Exchange , Bhopal Duraton : 21 days

Personal Info :-
Father’s Name : Mr.Ram Sujan Vishwakarma
Date Of Birth : 01/10/1983
Sex : Male
Nationality : Indian
Marital Status : Mairried
Languages Known : English, Hindi, writing Oriya

Declaration :
I hereby declare that all the details furnished above are true to the best of my knowledge.

Place :
Rakesh Kumar Vishwakarma

[deepettans]

RESUME
PERSONAL DETAILS :
Name : R.PRADEEP
Father's Name : K. Ramakrishnan
Date of Birth : 03 March 1972
Sex : Male
Nationality : Indian
Languages Known : English, Malayalam, Tamil, Hindi & French
E-mail ID :
deepettans AT gmail.com
p.ramakrishnan AT knpc.com
pradeep.ramakrishnan AT kharafinational.com

EDUCATIONAL QUALIFICATIONS :
Sl. No. Name & Address of Institution Course Title Year of Passing Class Obtained
1. Carmel Garden Matric. Hr. Sec. School,
Coimbatore -641045. X-Std 1988 First
2. V.L.B.Janakiammal Polytechnic, Kovaipudur, Coimbatore.
(State Board of Technical Education) Diploma in Electronic & Instrumentation Engg. 1988-1991 First
3. Anna University, Guindy,
Chennai - 600 025. B.E. in Electronics & Communication Engg. 2000-2003 First
Additional Qualification : a) MS –Office b) MS-Projects

TOTAL INDUSTRIAL EXPERIENCE : 19YRS IN THE FIELD OF INSTRUMENTATION
Sl.No. Name & Address of Organisation Position Held Period.
1.M/s . Kharafi National , Kuwait National Petroleum Company(KNPC),
Shuaiba refinery, Kuwait
Project Engineer –Maintenance (Inst)
June’09 – Till date
( 1 year)
2.M/s . Power Flow Engineering, Abudhabi,
United Arab Emirates.
Project Engineer (Inst)
July’08 – June’09
( 1 year)
3.M/s . Emerson Process Management,
Sharjah,U.A.E.
ProjectDesign Engineer (Inst)
June’07 – July ‘08
( 1 year)
4.M/s . Al-Suwaidi Industrial Services,
P.O Box-991, Jubail, Saudi Arabia.
[ SAUDI ARAMCO, Riyadh]
Project Engineer (E&I)
Oct’06 – May‘07
(6months)
5.M/s . CEGELEC, P.O Box 47055, Abu Dhabi (Branch).U.A.E[ Emirates National Oil Company(ENOC)],ENOC processing centre, Jebal Ali, DUBAI.
Instrument Engineer
(Projects)
July’05 –Oct’06
(15 months)
6.SPIC Heavy Chemical Division (Renamed as Tamil Nadu Petro Products Ltd. - HCD), Express Highway, Manali, Chennai- 600 068.
INDIA.
Instrument Engineer-
(Maintenance)
April’92 –July‘05
(14years)

SPECIAL TRAINING :
Sl.No. Name & Address of Organisation Position Held Period.
7. Southern Petrochemicals Industries Corporation Ltd., Tuticorin , Tamilnadu, India. ESS - Trainee (Engineering Subordinate Service) in Instrumentation July'91 - April'92 (8½ Month)

WORK PROFILE IN ORGANIZATIONS :
1. Name of the Company : M/s . Kharafi National , Kuwait National Petroleum
Company (KNPC), Shuaiba refinery, Kuwait.
Period : June’09 – Till date.
Post : Project Instrument Engineer- Maintenance.
Reference 1 : Mr. Gopal Krishnan Deputy C.M.E , Mobile: 00965- 67765819
1. Daily work planning ,scheduling ,and allocating the jobs to the technicians,
2. Manage and plan in the execution of the Corrective / Preventive Maintenance.
3. Conduct Root Cause Analysis (RCA) for any failure occurred affecting the Plant Operation such that it is not repeated henceforth.
4. Conducts Risk assessment for any Corrective maintenance to be carried with Operation APPROVAL in system which ensures that Plant operation is not affection.
5. Involves in the SDM activities for the PLC (ABB) with the vendor.
6. To coordinate, plan and supervise the Instrument Maintenance activities in his assigned area, conforming to all HSE policies and procedures.
7. To lead the operation and maintenance staff in analyzing root cause failure of plant equipment, using Sequence of Events (SOE) analysis, and identifying recommendations for resolving these issues. .
8. To initiate, develop and execute of Plant Change Requests (PCR).
9. Execute the MOC for Operation request.
10. Manage and co-ordinate the shutdown activities in Crude and Hydrogen area.
11. To prepare and update procedures and method statements for critical jobs, and also participate in HAZOP, IPF risk assessment and audit activities.
12. Involves in the complete Instrumentation maintenance/ trouble shooting / program modification of the FT-50 PLC system used in the for Bessemer Cooper based 16-V250 Engine based compressors for Hydrogen compressors in Hydrogen plant.
13. Modifies the graphics, software settings and configures in Honeywell DCS system

2. Name of the Company : M/s. Power Flow Engineering, (EPCL contracting Company)
(Al Jabber Group), Abu Dhabi, Phone : 02- 6273090
Period : June’08 – Till date.
Post : Project Design Engineer-Instrumentation& Controls
Reference 1 : Mr. PADMANABHAN - Automation Manager, Mobile: 00971-50-8183589

PRIME RESPONSIBILITIES :
1 All Engineering Activities like the Tendering & Estimation ,Creation / Review of all Engineering Contract Documents like, System Architecture, FDS, I/O List, Cause & Effect, Cable routing, Cable Schedule, P&ID, Data sheets, Instrument Loop Diagram (ILD), etc.
2 Designing / Selection of Instruments for the projects accordingly in a detailed engineering considering various process parameters pertaining to the requirement.
3 Attend Weekly Progressive Meeting with Clients, Consultants to discuss in detail about the project related issues like Documents Submittals status, Technical clarifications for the activities as per the Scope and specifications & Standards of the Client.
4 Sending enquiries for the Quote after the approval and procure the items from the approved Vendors as per the Contract specifications.
5 Allocation & Co-ordination of the entire site activates like Material Availability, Instrument Installation as per the specifications, Commissioning Activities, Preparation of the “As-Built” and provide Final Documentation handing over to the Client.
6 Creation, Testing & Commissioning of Program for systems like GE-FANUC and Interfacing with the existing Plant system.

3. Name of the Company : M/s. Consilium Middle East,
(Formerly known as SAAB Rosemount),
Emerson Process Management Group), Sharjah, U.A.E
Period : June’07 – July’08.
Post : Project Engineer-Instrumentation
Reference 1 : Mr. Punnose Jacob - Project Manager, Mobile: 00971-50-4629725
Reference 2 : Mr. Sree Valsan - Engineering Manager, Mobile: 00971-50-4628096

PRIME RESPONSIBILITIES :
1. Executed as an overall in-charge for the construction of 5 Skids at Hamriya Free Zone as a Site Manger for the American Client M/S Hanover, Yokohama, Unites States, under the Contractor M/s Belleli Energy, Hamriya Free Zone, Sharjah, U.A.E
2. Executed the Design Phase, Scheduling the Project, Project Execution Plan, Tendering & Estimation for the Offshore Project and Coordinating the Installation phase for the ongoing Onshore Project for the Client M/s VOPAK HORIZON FUJAIRAH LIMITED, U.A.E.
3. Executed as an overall in-charge for the Estimation, Procurement activities and execution phase of 13 Skids at Hamriya Free Zone for the American Client M/S Hanover, Yokohama, Unites States, under the Contractor M/s Belleli Energy, Hamriya Free Zone, Sharjah, U.A.E
4. Executing as an in-charge for the E&I works for the Client : ELCO , Bitumen Storage facility at port Khalid, Sharjah, United Arab Emirates
4. Name of the Company : M/s. Al-Suwaidi Industrial Services, P.O Box-991, Jubail, Saudi Arabia
Period : October’06 –May’06
Post : Project Engineer (Instrumentation)
Reference 1 : Mr. Prasad Bandekar - Project Manager, Mobile: 00971-50-6943014

PRIME RESPONSIBILITIES :
1. Estimation and Tendering of LSTK projects
2. Executed as Project Engineer in the construction activities for the Installation and assisting with the system vendor for the configuration and Integration of the Field Foundation Yokogawa DCS systems at Riyadh Refinery for the project “Upgrade Tank farm safety system”.
3. Involved in the Configuration / Calibration of the Foxboro transmitters, Mason-lien positioner and interfacing with the field foundation system.

5. Name of the Company : M/s Cegelec, Oil & Gas Division, Abudhabi, U.A.E
Period : April’06 –Septamber’06
Post : Instrument Engineer (Projects).

WORK RESPONSIBILITIES :
1 Submission of Cegelec and Vendor documents after preview for the approval to the Client
2 Filing all the incoming and outgoing documents and correspondence.
3 Numbering the documents.
4 Updating the documents status in the database.
5 Distribution of the stamped documents to the necessary areas after stamped and approval.
6 Listing out the weekly reports of the documents mentioning the documents status.
7 Estimation and Tendering of Projects.
8 Corresponding with the vendors for the quote, technical and commercial evaluation.
9 To plan , organize and supervise the construction team for the activities execution as per the Standards and Specifications of the client requirements with Safety as the prime objective.
6. Name of the Company : Emirates National Oil Company (ENOC)
[under M/s CEGELEC], Abu-Dhabi,U.A.E.
Period : July05 – April’06
Post : Instrument Engineer -Maintenance.

WORK RESPONSIBILITIES :
14. Daily work planning ,scheduling ,and allocating the jobs to the technicians,
15. Associate in the execution of the pending jobs, reducing the Backlog.
16. .Maintains the minimum and critical spares.
17. Raise RFQ for the Quote and allow the service order or Purchase order for
the purchase or services..
18. Attend seminars for any modification if required in any part to improve the measurements and control if suggested from the ESR.
19. Involved in the SDM activities for the PLC (Allen Bradley) with the vendors.
20. Worked as Quality control inspector and material control co-coordinator for the project in clearing the punch list.
21. To coordinate, plan and supervise the Instrument Maintenance activities in his assigned area, conforming to all HSE policies and procedures.
22. To lead the operation and maintenance staff in analyzing root cause failure of plant equipment, using Sequence of Events (SOE) analysis, and identifying recommendations for resolving these issues.
23. To be a member of the Engineering Emergency of the ESSON Duty Roaster, for providing support duties.
24. To initiate, develop and execute of Plant Change Requests (PCR).
25. To prepare and update procedures and method statements for critical jobs, and also participate in HAZOP, IPF risk assessment and audit activities.
26. To prepare scope of work, detailed engineering and execute Extra Ordinary and Major Maintenance activities (EOM/MM).
27. To ensure the proper update and availability of the current documents/ drawings/ equipment data sheets.
28. To conduct Toolbox meetings and Lateral Learning exercises for technical staff.

7. Name of the Company : TPL – HCD, Chennai, India
Period : July1995 – July2003 / July 2003 - July 2005
Post : Instrument Engineer -Maintenance.
Plants worked : Caustic Soda (Brine, fusion, Ammonium chloride, chlorine, hydrogen bottling, hydrochloric acid, waste air de-chlorination, boiler and water treatment).
WORK RESPONSIBILITIES :
1 Inspects, calibrates and maintenance of local instruments like pressure gauge (bourdon, capillary, diaphragm), temperature gauges [bi-metallic, capillary, indicators (Nishko)], I / P converters, P/I converters, level gauges (gauge glass).
2 Calibrates, installation, troubleshooting of flow meters like magnetic (rose mount, khrone-marshall, mass flow meters (micro motion), DP transmitters (Rose amount, bells, yokogawa)
3 Calibration of analyzers like pH, ORP (Rose mount model : 396P)
4 Configuration of single loop programmable controllers (SLPC – yokogawa) using SPRG programmer and tunes the desired type of control based on the type of operation.
5 Calibration and maintenance of control valve like butterfly (instrumentation limited), globe, diaphragm, ball etc.
6 Troubleshoots the interlocks in boilers which uses PLC (Allen Bradley) and has versatile knowledge in different types of controls like combustion, split range, 2,3 element, cascade. Able to understand the PLC ladder logics.
7 Configures the processors, I/O Modules, Modify rungs, Downloading and uploading program between the Hand terminal and Processor of the PLC (Allen Bradley – SLC 5/01 AND 5/02).
8 Modifies and troubleshoots interlocks abnormalities in relay logics implemented in equipments like compressors, chlorine liquefier, chlorine chillers.
9 Attends to thermocouple (K type), RTD (PT 100), indicators and recorders (yokogawa) calibration.
10 Attends to the abnormality in the loops connected to the DCS system (centum XL),
11 Prepares ISO 9002 documentation like calibration records, maintaining it up to date.
12 Conducts demonstration classes on safety like PPE usage and fire extinguishing techniques to the incoming trainees.
8. Name of the Company : SPIC, Tuticorin
Period : 1991 - 1992
Post : Instrument Engineer (ESS-I Batch)

WORK RESPONSIBILITIES :
10 Attended the theoretical training classes in during mornings.
11 Co-ordination with the technician and engineers in their day to day work on how to trouble shoot the problems at field during afternoons.
12 Study the PID drawings of each plant and maintain the log on day to day work.
13 Attends safety programme , first-aid programme and fire-fighting programme which involves practical sessions.

III. SPECIAL TASKS:-
Worked in errectioning, commissioning, and maintenance of all field instruments interfaced to distributed control system (Tata Honeywell – TDC 3000)
Worked in Programmable Logic Control Systems (Allenbradley SLC – 5/02) applied in boiler, gas analyser.

DECLARATION:-
The above said is true to the best of my knowledge.

Place: Kuwait
Date: 27/09/2010
(PRADEEP RAMAKRISHNAN)

[Guest]

RESUME
Muhammed Hafeel.H
Passport No : H5381904
muhammedhafeel AT gmail.com

Objective :
To develop my career as a professional where I will be a valuable team member, contributing
Quality ideas and to work for an organization where there is ample scope for individual as well as organizational
Growth.

Experiences :
One year experience as Electronics and Instrumentation technician in Calibration Cell of Biomedical Technology Wing, Sree Chitra Tirunal Institute for Medical Science and Technology, Thiruvananthapuram, India. The calibration services are provided for the ISO 17025 Certified tests (by COFRAC, FRANCE) in SCTIMST.

Qualification :
I. Diploma( 3 year )
Branch : Electronics and Instrumentation
Board : Board of technical exam Kerala (India)
Year of Passing : 2008
Aggregate Percentage of Marks : 77.5%
II. Plus Two
Specialization : Science and Mathematics.
Board : Board of Higher secondary exam Kerala
Year of Passing : 2005
Aggregate Percentage of Marks : 76.87%
III. 10th
Board : CBSE
Year of Passing : 2003
Aggregate Percentage of Marks : 75.9%

IT SKILLS :
Computer Hardware and Networking, MS office, Tally etc
Personal Skills :
Responsible, dependable & dedicated sees the assignment thorough
Excellent team player with good communication skills
Very flexible, vibrant and excellent coordination skills
Fast learner

Personal Information :
Father’s Name : Hamza Koya K
Date of Birth : 18041987
Sex : Male
Marital Status : Single
Nationality : Indian
E mail : muhammedhafeel AT gmail.com
Languages Known : English, Malayalam, (speak, Read and Write)
Arabic and Hindi (Read And Write)
Hobbies : Listening to music, Reading

PERSONAL STATEMENT :
I wish to have an opportunity to work in your esteemed organization and I assure that I will work hard and sincerely to complete the job that will be assigned to me. I here by declare that all the above given information is correct to the best of my knowledge. If given the opportunity, I will give my best to achieve the same.

Place : Alappuzha, Kerala
Muhammed Hafeel

[Guest]

Denny. s
Mail. dennysodaran AT gmail.com
INSTRUMENTATION Engg

OBJECTIVE :
Obtain a position with a company where i can maximize my leadership capabilities, technical expertise and knowledge, especially in the area of thermodynamics .To gain employment with a company where my leader ship experience and knowledge, especially the area of thermodynamics, can be effected.

EDUCATION :
BE INSTRUMENTATION& CONTROL ENG
2004-2008 udaya school of engineer
university : ANNA UNIVERSITY CHENNA
DIPLOMA COMPUTER SCIENCE ENG
2002-2004 Nooral Islam polytechnic
Board : DPT OF TECHNICAL EDUCATION BOARD TAMILNADU
PLUS TWO
2000-2002 Gov. H. S. Paravoure
kerala education board
S.S.L.C
2000 Kottapuram .Gov. H. S. Paravour

Engg PROJECT :
"PLC BASED LURO BURNER MANAGE MENT SYSTEM IN SO2 ACID PLANT" .Done by FACT Ltd. Gov of India
DIPLOMA PROJECT :
" NETWORK IN NITHET BOARD SYSTEM" using VB language
SFTWARE KNOWLEDGE :
C++,C, VB, office software tools,
EXTRA SAFETY COURSE :
STCW -95

WORKING EXPERIENCE :
Three years on the job field experience in the oil and gas offshore industry successfully worked and gained value able experience at three ONGC offshore projects. I had attend the three offshore oil& gas projects success completion.
OFFSHORE PROJECT EXP DETAILS
1 : BCPA -II (BOOSTER COMPRESSED PROCESS A-II)
Clint : ONGC .
Contractor : L&T
Subcontractor : PCTS
Duration : 2/12/2008 to 12/05/2009
Platform : BCPA-II
work detail : Hook up and commission
my role : instrumentation engineer

2 : BCPA-II (BOOSTER COMPRESSED PROCESS A-II)
client : ONGC.
Contractor : SAMSUNG, L&T
Subcontractor PCTS
Duration : 12/10/2009 to 21/04/2010
Platform : BCPA-II
Work detail : maintenance and punch point
my role : E&I engineer

3 : MHNRD-II (MUMBAI HIGH NORTH REDEVELOPMENT PROJECT-II) 04 WELL PLATFORM
Clint : ONGC.
Contractor : L&T
Subcontractor : PCTS
Duration : 9/09/2010 to 20/5/2011
Platform : MHNRD-II 04 WELL PLATFORM (N-17,N-18)
Work detail : (project) Manufacture, Hook up, Commission
my role : E&I engineer

4 : MHN-PPLQ(MUMBAI HIGH NORTH PROCESS PLATFORM LIVING QUARTRES)
Clint : ONGC
Contractor : L&T
Subcontractor : PCTS
Duration : 11/06/2011 to till date
Work detail : (project) Manufacture, Hookup, Commission
my role : E&I engineer

WORK KNOWLEDGE :
Instrumentation : calibration, termination, maintenance, tubing, hot checking, installation
Electrical :tray work, cable laying, termination, support work
. Common : P&ID, engineering drawing, Electrical termination , JB location drawing, Tube tray layout, Hook up drawing, PLC(OMARON) ladder logic, SCADA operation.

MORE WORK KNOWLEDGE :
calibration smart type Instrument :
pressure Transmitters, Temperature Transmitters, Flow transmitters, Level Transmitters, Transmitters, Multivariable flow Transmitter Smart type control valve, Gas Detectors, RTD, Thermocouple. pressure switch,
calibration pneumatic type Instrument :
pressures switch high ,pressure switch low, Level switch high , Level switch Low, Pressure indicate controller,
calibration valve :
pressure control valve, Flow control valve ,hand control valve, self actuating pressure control valve, deluge valve, safety valve, shutdown valve, blow down valve.

INTEREST AREAS :
offshore oil & gas projects
Team Leadership
Project Management
Oil & gas

[Guest]

Mirza Rehanulla Baig
mirza_ectel AT yahoo.com

Career Summary :
Qualified and Technically proficient Instrumentation & Process Control Engineer offering an experience of 3.5+ years in the Power Generation Industry Domain with substantial experience in detailed engineering involving development of Control Philosophy, P&IDs, Controller Tuning, Cause & Effect Diagrams, Logic Diagrams, Loop Diagrams, Wiring Diagrams, Fire and Gas Systems, Analyzers and Field Instruments. Proficient in DCS, SCADA, PLC Programming, Configuration, Interfacing and Application
Demonstrated ability to efficiently prioritize a broad range of responsibilities in order to achieve maximum level of operating effectiveness.

Career Objective :
I aspire to join in as Instrumentation & Process Control Engineer in the Power Generation Plants, oil & gas Industries to efficiently utilize my skills aiding the profitability of the organization.

My core competencies include :
Controller Tuning, Cause & Effect
Analyzers & Field Instruments
Process Control Instruments
DCS, SCADA, PLC Programming, supervision of Loop Check, Cold & Hot Function test, Redundancy test, Protection test
Communication And Presentation Skills
Interpersonal Skills
Time Management
Leadership And Team Building Qualities

Professional Experience :
I & C Engineer-Commissioning & Maintenance
Samsung C & T (EPC Contracting)
Presently working in Samsung C & T
Samsung-Siemens Consortium project
Consultant : Fitchner Owner’s Engineers
Code : AE1166, Shuweihat S2 IWPP project
Plant capacity 1500 MW (Siemens T3000 DCS)
HRSG & BOP incharge (M & S Duct burner BMS system,
HIMA PLC) – Ruwais, Abu Dhabi
Instrumentation Engineer-Commissioning
Hyundai engineering and construction co. Ltd
( EPC Contracting) – Jebel ali, Dubai
Hyundai Engineering and Construction Co, Ltd for Hyundai-Fisia Italimpianti Consortium project CNE/122/2004, Jebel Ali Power and Desalination Station "L" Phase 2 of total plant capacity 1200 MW for Dubai Electricity and Water Authority (DEWA) and Lahmeyer International as consultant for installation, commissioning and maintenance of the following systems.
4×Siemens type V94.3A ECONOPAC gas turbines connected to an electrical generator capable of 200 MW each with modern governor control system Simadyne-D.
2× M30-40 type Alstom steam turbines connected to a generator capable of 200 MW each.
Multi-Stage Flash (MSF) desalination units each with a total net capacity of 55 million gallons (imperial) of potable water per day.
4× Heat Recovery Steam Generators(HRSG) by NEM supply steam with a pressure of 104 Bar and temperature of 563.9ºC to two(2) steam turbines with Fail-safe system Version Siemens Teleperm XP DCS.
In addition to four (4) HRSG a single high pressure auxiliary boiler by NEM of steam flow 133 kg/s (Maximum) with Fail-safe system Version Siemens Teleperm XP DCS.
Oct 2010-Jan 2012
Feb 2010-July 2010

Instrumentation Engineer-Commissioning :
Petronet Lng Ltd (1500 MW-Combined Cycle)
Dahej terminal, Bharuch Dist., Gujarat, India June 2008 – Dec 2009
Roles & Responsibilities :
Responsible for programming function diagrams in FUP Editor (Siemens T3000 & Teleperm XP)
Generating & transferring hardware/software codes online/offline in Engineering station (ES680) for carrying out cold & hot function test of open/closed loop systems witnessed by the consultant and client
Modification and assigning terminals of the interfacing signals from the various devices and sub systems to the DCS. Creating and modifying interconnection loop/wiring diagrams in AUTO-CAD
Supervision of Loop check, Line check, Continuity check, Protection test,
Cold & hot function test and Redundancy test.
Troubleshooting communication problems of DCS such as optical switch modules, fiber optics, plant bus, terminal bus and Ethernet bus(CSMA/CD Mechanism) as per OSI reference layer model conforming to IEEE 802.3 standard
Loading of vendor defined programmes in automation processors
Modifying and editing graphics of the operating terminal in MMI editor of OM650 and Dynavis as per revised P&IDS and consultant’s request
Tuning of closed loop systems like feed water system, condensate system, steam system, gas compressor, chemical dosing for optimal control of the plant.
Coordination with the Consultants and Vendors for standardization of the instruments and process control systems
Supervision of Installation, Commissioning, Preventive and Proactive Maintenance of various instruments like pressure, Flow, Level & Temperature Transmitters, Switches, Gauges, Analyzers and Control Valves.
Computation of efficiency of the instruments by calculating the probability of incidence
Industrial Safety Management according to International Standards.
Maintaining the standards according to IS014000 & ISO9001 : 2001
Attending seminars, symposiums, workshops and lectures to up-grade my practical knowledge and talents

Education :
Bachelor of Technology in Electronics and Communication Engg. May 2008 with First division from Jawaharlal Nehru Technological University(JNTU), Hyderabad, India

Technical Skills Languages :
Operating system C, C++, Visual Basic
NT/95/98/2000/XP/VISTA, DOS, LINUX/UNIX
Assembly Language µp 8085,8086 and µc8051 programming
Packages MS OFFICE, AUTO CAD-2007, VISIO
Networking Hardware Networking, MCSE, CCNA

Trainings Attended Specialized training courses completed successfully at Advanced Training Institute for Electronics & Process Instrumentation, Hyderabad, Government of India :-
“DCS Programming for Process Control (HONEYWELL TDC 3000)”
“Programming and Application of PLC (SIEMENS S7-300 )”
“Programming and Application of PLC ( ALLEN BRADLEY SLC-500 Family)”
“Automation using Micro PLCs” (SIEMENS LOGO)
“SCADA Programming for DCS (HONEYWELL SCAN 3000 SCADA)
“Process Instrumentation & Control”
“Industrial Sensors, Controllers, Recorders, and its Applications”
“Microcontroller 8051 Programming and its Applications in Process Industry”
“Microprocessors 8085 & 8086 Programming”
“Fiber Optic Communication”

[Unregistered]

RESUME
D.GANESH.
Email ID :ganeshdurai90 AT yahoo.com

OBJECTIVE :
To seek an opportunity to apply my skills and knowledge for the growth of the company and my career.

ACADEMIC QUALIFICATION :
COURSE INSTITUTION BOARD/UNIVERSITY YEAR OF PASSING PERCENTAGE OF MARKS
B.E :
in Instrumentation &Control Engg. A.V.C.College of Engineering
Mayiladuthurai.
Anna University
Pursing
(2010-2013)
68

Diploma :
in Instrumentation &Control
Engg. A.D.J.Dharmambal
Polytechnic College,
Nagappattinam.
Directorate of Technical Education
(2008-2010)
88

HSLC :
Swami Dayanandha Higher Secondary School
Manjakkudi.
State Board
2006-2008 77

SSLC :
Swami Dayanandha
Higher Secondary
School,
Manjakkudi.
State Board
2005-2006 67

AREA OF INTEREST :
Industrial instruments.
Electrical machine.

TECHNICAL SKILLS :
PLC.
Industrial automation.

PROJECT DONE :
TOPIC : Digital Flow Meter.
TOPIC : Batch Process Control of Sugar Dilution using Micro Controller.

CO-CURRICULAR ACTIVITIES :
Industrial visit in Pioneer Power Plant &Kerala Electrical Ltd..,(KEL)

EXTRACURRICULAR ACTIVITIES :
The Bharat Scouts.
National Cadet Crops member(NCC).

PERSONAL DETAILS :
Date of birth : 20/02/1990
Gender : Male.
Martial status : Single.
Father’s name : R.Durai.
Language known : English&Tamil(Read&Write).
Hobbies : Playing Volley ball.

DECLARATION :
I hereby declare that the above particulars are true to the best of my knowledge.

Thanking you,

PLACE :
DATE :

Your Faithfully,
(D.GANESH)