www.petrofac.com Engineering Services India Pvt Ltd Chennai : PDS Piping Design, HVAC, Process

[Admin]

Petrofac Engineering Services India Pvt. Ltd.
http://www.petrofac.com/

Job Location: Chennai
PDS piping, HVAC, process, planning

Company Profile :
Petrofac Group is one of the pioneer companies in Oil & gas sector, having more than two decades experience with offices spread across globally. Petrofac Engineering Services India Pvt. Limited (PESIL-Chennai) offers a dynamic team environment, challenging opportunities and a platform to grow faster.Applications are invited for the following positions:

PIPING ENGINEERS

Job Description :
The candidate should have exposure in conceptual & detail design in Oil & Gas field (Knowledge in stress analysis, PDS, Pipelines & International Codes & Standards is required)

Qualification : B.E / B.Tech (Mechanical) or M.E / M.Tech with minimum 8+ years of experience in Oil & Gas Industry.

PROCESS ENGINEERS

Job Description :
The candidate should be well versed in the Design & Engineering Consultancy field preferably in Oil & Gas industry. Knowledge of process software like HYSYS, FLARENETetc. is essential.

Qualification : B.E / B.Tech (Chemical) or M.E / M.Tech with minimum 8+ years of experience in Oil & Gas Industry.

PLANNING ENGINEERS

Job Description :
The candidate should have knowledge in scheduling, planning, progress measurement & reporting for Engineering / EPC. Knowledge in PRIMAVERA, MS Project, MS Office is mandatory.

Qualification : B.E / B.Tech or M.E / M.Tech with minimum 5+ years of experience in Oil & Gas Sector.

HVAC ENGINEERS

Job Description :
The candidate should be conversant in designing of HVAC systems for Oil & Gas Industry. Candidates with knowledge in HVAC design software will be preferred.

Qualification : B.E / B.Tech (Mechanical) or M.E / M.Tech with minimum 8+ years of experience in Oil & Gas Industry.

Location : Chennai

Contact
Petrofac Engineering Services India Pvt. Ltd.
Email : hr.chennai@petrofac.ae

Email Resume hr.chennai@petrofac.ae

DLF Infocity SEZ, 4th Floor, Block 1C, 1/124, Shivaji Gardens,
Nandambakkam Post, Manapakkam, Chennai-600 089.
Tel: 044-3927 3000. Fax: 044-3927 3100
www.petrofac.com


Mumbai, India Operational Centre
Petrofac Engineering India Pvt Ltd
7th Floor, Ventura
Central Avenue
Hiranandani Business Park
Powai
Mumbai 400076
India

T: +91 22 3051 3100
F: +91 22 2570 4705


Chennai, India Operational Centre
DLF Infocity SEZ
4th floor, Block IC
1/124 Shivaji Gardens
Nandambakkam Post
Manapakkam
Ramapuram
Chennai-600 089
India

T: +91 44 3927 3000
F: +91 44 3927 3100

Kuwait City, Kuwait Country Office
Block No. 9
Building 24
Ahmadi-Mustafa Karam St.
Ahmadi 61009
Kuwait
T: +965 2398 5030
F: +965 2398 5035

Doha, Qatar Country Office
PO Box 2895
Souk Al Mirgab
Salwa Road
Doha
Qatar
T: +974 4411 005 & 4311 005
F: +974 4411 008

Abu Dhabi, UAE Country Office
The Avenue Business Center
Emirates Tower
1st Floor
Suite 110
Hamdan Street
Abu Dhabi
United Arab Emirates
T: +971 2 412 4000
F: +971 2 412 4111

Dubai , UAE Training Centre
Dubai Petroleum Training Centre
Al Safa Road
P.O Box 2222
Dubai
United Arab Emirates
T: +971 (0)4 301 2795
F: +971 (0)4 301 2799

Sharjah, UAE Operational Centre
Petrofac House
Al-Khan Road
PO Box 23467
Sharjah
United Arab Emirates
T: +971 6 574 0999
F: +971 6 574 0099

Al-Khuwair, Oman Country Office
PO Box 2012, PC 111
CPO Seeb, Block No. 205
Al Nadha Tower, Near Safeer International Hotel
Al- Khuwair
Sultanate of Oman
T: +968 24484525
F: +968 24487942

[Guest]

Dear Sir

I AM INTRODUCING MYSELF O C.S.RAGHAVENDRA PRASAD


Career Summary
C.S.Raghavendra Prasad has over 22 Years (17 Years in Pressure Parts, Pressure Vessels, Tankages etc…) (5 Years in Oil & Gas) of Experience in Detailed engineering in Preparation and Drafting, checking related to power Projects and Refinery & Petrochemicals. In both Indian & Global projects.
Responsibilities are development of Plot Plan, Equipment Layout, Pipe rack and Nozzle Orientation; Defining structures required for equipment & piping systems; Development of detailed piping drawings for various piping systems.
Responsibilities and having capabilities in piping layout, piping isometric diagrams,
Preparation of ASME U-Stamp Pressure Vessels of Arrangement and detailing of equipments, Cutting Plans, Material take off.
Preparation of Pressure Parts for Power Boilers and Industrial Boilers, Heat Exchangers,
Study and Review of Plot Plan / Equipment Layout / Process Description / PFD Preparation of Flow Sheets, P & I Diagram , Material Selection diagram for process and petrochemical industries.
Extract and checking odf Piping Isometrics,area wise and line wise.
Well working knowledge in PDS-Design.
Apart from above having exposure Inviting for quotations to various vendors for pricing the items . Bill Of Materials And Preparing Code Calculations for Process and Petrochemical Industries.

SPECIALIZATION EXPERIENCE / KNOWLEDGE
Knowledge of Various Design Standards and Codes like ASME ASTM ANSI IBR IS.

Work Experience : Total: 22 Years

Present Employer
INTECSA Industrial S.A, Madrid, Spain (On Deputation through QUEST ltd India)

July 2008 till present Working as Sr. PDS-Designer
- Involved In preparation Equipment modeling , Piping layout using PDS –Piping designer
- Involved in preparation of Orientation and Elevation and Planning study Diagram

Project – PROYECTOR REPSOL – YPF – C10 AMPLCATION
Client - REPSOL YPF REFINERY CANTAGERA



• Bechtel India Private Ltd, ( On Deputation through EPC Global Pvt Ltd , Gurgaon)

Oct 2007 to June 2008 Working as Sr. PDS-Designer

- Working as a Responsible Engineer For the below said Area
Project: - Motiva Enterprises LLC and JV Port Arthur Refinery.)
Area handled: Crude Area (Amine Flash Drum and Amine Contactor Area)

- Involved in Preparation from 30 % to 90 % of model review and reviewing the tags
- Involved in Checking the Vendor Prints and Redlining the comments if any
- Simultaneously modeled the supports in the initially purpose
- Involved in preparation of O & E and Planning Study Diagram

• C.S.Impianti , Srl, Milan, Italy ( On Deputation through ITC Technology Srl , Italy)

Sep 2006 TO Sep 2007 Working as Sr. PDS-Designer

- Involved in Preparation of Equipment modeling, Piping layout using the PDS-Piping designer
Running of interference Clash report and Resolving Clashes, Review of Structural Layouts, Review of Nozzle Reports And isometric extraction.
- Review of Vendor drawings, Review of Stress Support Marking for critical lines, Review of isometric Drawings and Issuing of Isometric for AFC, modeling reviews using SPR
- Involve in piping modeling for the Fire Water Systems
- Involved in Piping Layout For Tie in Demolition

Project: - SALAVATNFEFTEORGSINTEZ, SALAVAT - RUSSIA HDPE 120 KT / Y
Client: - Tecnimont ICB
Area Handled: Extrusion Area ,Hexane Tank Farm Area , Catalyst Area

Project: - QURRAYAH SEAWATER TREATMENT PLANT
Client: - Saudi Arabian Oil Company B.V (A.O.C)

Area Handled: Polyelectrolyte Biocide & Coagul,
Hypochlorite and Laboratory

• FOSTER WHEELER INDIA PRIVATE LIMITED, Chennai, India
June 2001 to Sep 20006 Worked as Senior Designer – Piping

- Responsibilities for Preparation of Isometric Preparation of MTO for isometric drawings, preparation of piping support drawings with reference to the GAD and P & I Diagrams. Development of piping layouts and Nozzle orientation, Defining structures required for equipment and piping systems and interface with civil department.
Project : - Saudi Aramco Mobile Revamp Project (SAMREF)
(LSADO & 2006 Turn Around Projects.)
Area handled: Light Ends, Alky Soft , merox, Inter stage Amine Absorber.

- Responsibilities for Preparation of Equipment modeling and nozzle orientation, Piping layout using the PDS-Piping designer modeling. Pipe rack arrangement and manifold lines. Preparation of isometric extraction and checking the Isometric drawings with layout.
Project : - BDO (Butanediol) Plant, Insvita, South Korea (Basic Engineering Design)
Area handled: Acetylene Supply & BYD Reactor, Catalyst Handling, methanol & Formaldehyde column & Utility Area.
- Responsibilities for Preparation of Equipment modeling and nozzle orientation Checking coordinates through nozzle reports and Piping layout using the PDS-Piping designer modeling. Pipe rack arrangement and manifold lines. Preparation of isometric extraction and checking the Isometric drawings with layout.
Project: - SHARQ 3rd Expansion Utility and off sites Project
Area handled: Demineralized Water Tank, Boiler and condensate Area, Condensate Area.
- Preparation of Flow Sheets for Port Arthur Refinery project, USA & Rabigh Refinery ,Saudi Arabia
- Preparation of P&I Diagrams using PDS 2D / Micro Station for ERG project, ITALY
- Preparation of ASME B31.1 Design Calculations and HRSG Piping for Mirant Mint Farm, Marcus Hook, Secco, City of Medicene Hat Projects, USA.
- Preparation of Boiler Pressure parts detailing for 2 x 400 Mw Springerville Expansion Project-Bechtel Power Corporation, USA.

• ENSYS TECHNOLOGIES PRIVATE LIMITED. Chennai, India.

May 1999 – April 2001 Worked as JUNIOR ENGINEER – Engineering Dept.

Responsibilities
- Checking and Release of Fabrication Drawings for Incinerator
- Preparation of Bill of Quantities
- Bar bending schedule (BBS) for civil works and R.C.C tanks
- Preparation of Fabrication drawings for Column, Beams and Supports
Deputation
- Deputed to Al Ballash Structural Steel Fabrication L.L.C – Dubai. For 7 months. Preparation of Fabrication drawings for Steel Columns, Platform, Connecting Details and Bracing details. Preparation of Bill of Materials and MTO.

• CHIP NGAI ENGINEERING WORKS SDN BHD (Fully owned by CN ASIA CORP. BHD) Malaysia.
April 1997 – May 1999 Worked as AutoCAD DRAUGHTSMAN – Pressure Vessels
Involved in Checking and Preparation of Cutting plans for Shell, Dished ends, Roof plates and Bottom plates for Storage Tanks (Max. dia. of 48 mts and the height of 16 mts). Preparing details for Roof Truss and Center Drum. Preparing of Material take off. Familiar with dished end work chart, BOM, welding details and Material specifications for Plates, Pipes and pipefittings.

Projects Handled
- Singapore Acrylic Easter Pte Limited. Singapore
- Petronas Fertilizer Kedah, Malaysia
- Sembawang Engineering & Construction, Singapore
- Kertih Aromatics, Malaysia
- Kertih Venyl Chloride Momomer (KVCM), Malaysia
- M W Kellogg / Exxon Chemical, Singapore

• IGNIFLUID BOILERS INDIA LIMITED Chennai, India.

November 1995 – April 1997 Worked as AutoCAD DRAUGHTSMAN – Boiler Dept.

- Preparation of General Arrangement and detail engineering drawings for Steam drum, Water drum, Headers, Economizer
- Preparation of General Arrangement and detail engineering drawings for Chimneys and Flue gas ducts.
• I. A. E. C. BOILERS LIMITED Chennai, India.

March 1993 – November 1995 Worked as AutoCAD DRAUGHTSMAN – Boiler Dept.

- Preparation of General Arrangement and detail engineering drawings for Steam drum, Water drum, Headers, Economizer.
- Preparation of General Arrangement and detail engineering drawings for Chimneys and Flue gas ducts.

• VAISHU ENGINEERING INDUSTRIES LIMITED Hyderabad, India.

December 1990 – March 1993 Worked as DRAUGHTSMAN – Boiler Dept.
- Preparation of General Arrangement and detail engineering drawings for Tube sheet layout, Heat Exchangers.
- Preparation of General Arrangement and detail engineering drawings for Smoke Boxes, Chimneys and Flue gas ducts.

• ENFAB ENGINEERS AND FABRICATORS Hyderabad , India.

November 1989 – December 1990 Worked as DRAUGHTSMAN
- Involved in Preparation of General Arrangement and detail engineering drawings for Pressure Vessels like Reactors and Heat Exchangers. Preparing of Bill of Materials. Inspections of Fabricated components.

• ENMAC ENGINEERING PRIVATE LIMITED Kolar , India.
December 1988 – November 1989 Worked as TRAINEE DRAUGHTSMAN

- Involved in Preparation of Engineering drawings for Pulleys and Idlers

• Software Skills
- Proficient in AutoCAD RELEASE-14 / 2000
- Proficient in Microstation –V7.1 and V8.1
- Proficient in PDS – 2D drafting
- Proficient in Plant Design System ( PDS)
-Piping designer
- Equipment Modeling
-Isometric Drawing Manager
- Drawing Manager
-Interfrerence Manager
- In house Trained in PDMS
- Familiar with Microsoft Office 2000
• Specialization Experience / Knowledge

- Knowledge of Various design standards and codes like ASME, IS, ASTM, ANSI and IBR

• Personal Details

- Name : C S Raghavendra Prasad
- Address : No. 2 (Old No. 11), “Brindavan’, Kamakoti Street,
Ramnagar, Ambattur,
Chennai – 600 053, INDIA.

- Date of Birth : 10 June 1970
- Nationality : Indian
- Qualification / University / Year of Passing : National Apprenticeship in Draughtsman – Mechanical
/ Indira Ind. Training Institute/ Chennai, Tamil nadu
India / 1988

- Marital Status / Number of Dependents: Married / Two
- Passport # / Validity: E5769067 / 30 June 2013

[prasadshetty4u]

PRASAD S. SHETTY
Mobile: +91 9930791330
Email: prasadshetty4u AT gmail.com

B.E. Mech. with 4 yrs experience, 3 yrs as Site Engg. in Oil & Gas projects for clients Gasco, UAE & BPCL Refinery, India and 1 yr in inspection of fabrication and machining.

EDUCATIONAL QUALIFICATION:
BE (Mech) from Mumbai University Nov 2004.
HSC from Royal College, Miraroad, Mumbai Board with Second Class.
S.S.C from St. Francis High School, Bhayandar, Mumbai Board with First Class.

PROFESSIONAL EXPERIENCE:

CCIC ( CONSOLIDATED CONTRACTORS INTERNATIONAL COMPANY ), AbuDhabi, Project HGCE for clients GASCO & FLOUR Mideast.___________Jan'08 to present.

- Coordinate with planning to meet weekly erection targets as per material availability. Maintain daily timesheet for equipments and manpower.
- Monitor piping progress and assist supervisor for onsite above ground piping erection (Both OSBL & ISBL for GASCO, Habshan), welding, bolting and testing as per control specs and applicable API and ASME codes with QC acceptance in case of discrepancies.
- Report daily production and tonnage groupwise for piping and supports. Check daily update of Talisman for efficient and smooth flow of material, planning of activities and control. Make requisition for trailer, hiab, forklift, cranes, welding machines & generators from rigging department and stores as per site requirement.
- Co-ordination with QC, NDT, PWHT for field joints, check DWR, ICS etc. and coordinate with civil, structural and instrumentation painting contractors. Schedule daily activities according to weekly target; prepare daily progress reports and timesheet for equipment and manpower.
- Coordinate with CCIC design, test pack centre, attend punchlist for test limits mentioned in P&ID. Assist QC for system walkdown with PMC, Flour Mideast and client, Gasco. Clear redlines and comments and punchlist items before hydrotest. Make as built in case of modifications as per site requirements and getting it approved.
- Ensure all activities are carried out safely and in compliance to Gasco PTW system, company HSE policies and arrange for client requirements for critical jobs.

BPCL (MAHUL OIL REFINERY) on contract through BONACE ENGINEERS Pvt. Ltd. (Thane) ___________April'07 to Dec’08

- Project Engineering: Review of input information drawings from other disciplines and clients, Issue of information drawings to other disciplines, equipment layout drawings, piping general arrangement drawings, piping routing on various equipment and racks. Planning / Administration / Execution: Prepare Job Scope and schedule in-house projects. Planning, Supervision and maintaining job status and looking after contract documents, tendering documents, costing and estimation for projects.
- Evaluate billing amount and quantity for fabrication, erection-dismantling, hydro-test, shot blasting - painting, scaffolding etc.
- Site Supervision & Coordination in Engineering & Construction Projects : for material according to BOM. Evaluation of technical bids supplied by vendors.
- Monitor progress to complete project within specified time frame and with proper permit clearances and safety measures for erection, fabrication, testing of piping of various plants, process vessels & equipments, replacement of old pumps, compressors, turbines, cleaning oil-catchers.
- Obtaining hot work, cold work, electrical, radiography Clearance & Permits To Work from Operation groups of various units and guiding the contractor to supervise all site constructions, planning of daily jobs along with contractor for fabrication.
- Coordination with operations and maintenance for outages and hookup of new lines to existing lines.
- Carry out stage wise inspection and maintain inspection records of Welding practices, RT and other NDT as required, Hydro-test, Leak-test, cardboard blasting, flushing and offering to BPCL inspection for setup, fabrication, mechanical clearance, erection, shot-blasting surface preparation, paint DFT, FRP or cement lining of pipes. Offer alignment & levelling of rotating equipments (motor/ engine/ turbine driven).
- Follow-up with civil, instrument, and electrical for timely completion of excavation, foundation, tubing, cabling, electrical and instrument panels and equipments like orifice, thermowells, PG, TG etc. as required in P&ID.

RAGMET ENGINEERS Pvt. Ltd. for projects in BPCL Bharat Petroleum Corporation Ltd. Mahul Refinery___________Nov'05 to March'07

- Site Supervision in Maintenance and E&C Projects. Plan jobs and manpower required and arrange Permits from Project In-charge for various units and assist the supervisor to carry out all site activities & constructions, planning jobs on daily basis and carry out jobs at yard and site as per CWP and in accordance to BPCL QCP, tender documents and HSE policies.
- Review piping general arrangement drawings, line routing on various equipment and racks & prepare required material list according to BOM. Evaluate billing amount and quantity for fabrication, erection-dismantling, hydro-test, shot-blasting - painting, scaffolding etc.
- Prepare schedules & progress reports on MS project and prepare MIS reports. Ensure smooth flow of activities and completion of projects within specified time frame and with safety and PTW clearances and safety measures for erection, fabrication, testing of piping of various plants, process vessels & equipments, replacement of old pumps, compressors, turbines, cleaning oil-catchers and slug catchers.
- Arrange with QC department for inspection as per BPCL QC requirements and maintain inspection records DWR, RT / MP and other NDT as required, Hydro-test, Leak-test, Cardboard blasting, flushing and offer BPCL inspection for fitupup, fabrication, mechanical clearance, erection & alignment, shot-blasting surface preparation, DFT for painting, FRP or cement lining of pipes and valves. Offer alignment & levelling of rotating equipments (motor/ engine/ turbine driven).
- Assist and coordinate with plant superintendent, operators and consultants for pre-commissioning and commissioning activities.

PROJECTS HANDLED IN BPCL REFINERY.

- CDU-VDU Coalescers for HGO & LGO: Piping fabrication, inspection, testing, erection, nitrogen and steam flushing for installation of two Coalescers and Prefilter vessels and ( 2” to 10” lines ) and hookup to existing system.
- P/H 5 ATF pump: Piping fabrication, erection, testing and pigging of 14” suction from ATF tanks and 10” discharge lines up to plant battery limits for pumping ATF to Sahar airport.
- Fire Fighting systems: Piping fabrication, erection and performance test of Foam and Sprinkler lines, supports, foam dams etc. for Tankages & FPU Oil catcher.
- B/H & DM plant: 10” Auxiliary Steam Conservation Header from HEB 1/2/3 to utilities. Installation and erection of Engine driven IR Reciprocating compressor (3000 CFM) & Motor driven Centrifugal compressor (6500 CFM) in coordination with IR Site Engineer, fabrication & testing of associated piping. Replacement of motor driven pumps in DM plant.
- FPU Oil Catcher: Cleaning and sludge removal of oil catchers and replacement of plate packs.
- FPU Hotwell: Piping & testing of lines and provision of mixer for caustic mixing in sour water discharge line.
- SRU-DHDS: Piping and insulation for Steam condensate heat and water recovery system from various process lines and equipments and pumping to condensate recovery drum.
- Steam Turbine driven HSD pump in CPP: Steam blowing of LP & HP steam lines, manual and laser alignment, attend check list jobs and commissioning activities.

STEELFAB ENGINEERS Pvt. Ltd. (Wagle Estate-Thane) (Heavy Machine Component Fabricators & Turners) ____________Jan'04 to Oct'05

- 1 year as QC engineer for fabrication and machining components like motor stators, main carrier for windmills, hoists etc. as per QAP, maintaining records and assisting client inspections or third party inspections like TPL, TUV, Quest etc.
- Monitoring welding progress and procedures, weld preparations, welder qualifications and assisting NDT like dye penetrant, UT, RT, MP for weld seams carried out by skilled personal on various grades and thickness of structural steel plates, pipes, rods etc.
- Maintain records of documents like Progress Reports, material procured and quantity used, Mill TCs, Lab Certificates, stamp transfer records, WPS & PQR etc. for projects of L&T, Enercon, Suzlon, Siemens etc

JOBS EXECUTED:
- Inspection for jobs like Yoke, Intermediate Structure, Conveyor Middle Structure & tensioning unit, Winch Drum, Azimuth bearing, Elevation bearing base & cover, Wheel base, sole plate, adaptor for antenna (machining and drilling) etc. for L&T.
- Machining inspection for output casings, input casings, planetary gear boxes for sugar industries of up to 2 meters diameter for Walchandnagar.
- Regular inspection of fabrication and machining for Stators and Motor Housings for CGL, Suzlon through Siemens, ABB, Kirloskar etc.
- Welding fixture for Siemens Panels, Drill jigs etc.

ADDITIONAL TECHNICAL SKILLS :

- Piping Design from Elixir Institute, Thane.
- Knowledge of preparing piping GAD, P&ID, piping, equipment and plant layout drawings. Isometric Piping Drawings, pipe rack design, pipe routing. Preparation of MTO/BOM, piping specification.
- Familiar with various commonly used materials and their properties & codes and standards like ASME, API, OISD etc.
- Undergone safety training and induction for work at height, confined space entry, supervisor specific training, Originator for Gasco PTW system.

COMPUTER KNOWLEDGE & EXPERIENCE :

- MCR, WPS, PQR, QAP etc. on MS Word, MS Excel.
- Prepare Inspection reports, MIS reports, on MS Project.
- Trained in C++, Pascal, basic AutoCAD and 3D modelling.

ACADEMIC PROJECTS :

Project on design of rolling mills from Ameet Industries, Taloja.
Automobile Engineering as elective for final year engg.

CONTACT DETAILS:

Permanent Address: 101 Girijatmaj Apt., J.P.Thakur Road, near police stn. Bhayandar (W), Thane 401101.
Email: prasadshetty4u AT gmail.com, prasu_d143 AT yahoo.co.in
Phone: + 91-022-28047281 Mobile: 9930791330

Date of Birth: 13 Apr 1979 Height: 5'9 Gender: Male Nationality: Indian

LOCATION PREFERENCE: NONE
PHYSICAL DISABILITIES OR ALLERGIES: NONE
CURRENT CTC: $ 22000 per annum.

[Guest Poster]

hi

searching a job for team lead

[praveen_1116]

CURRICULAM VITAE

PRAVEEN KUMAR.Y 200/1, VELLALA ST,
PH.NO: +91-9841481148 PURASAWALKAM,
E-MAIL: praveen1116 AT gmail.com CHENNAI-600084

Career Objective
To achieve success in all endeavours I undertake and to establish a successful career rendering the best off efforts with utmost sincerity and devotion.

Academic Chronicle
Course Year Institution Board of Control Percentage
B.E (EEE) 2002-06 Raja Rajeswari Engineering College,
Chennai, TN Anna University 66

12th Std 2002 St Mary’s Mat Boys H.S.S,
Chennai, TN State Board of Tamilnadu 75
10th Std 2000 St Mary’s Mat Boys H.S.S,
Chennai, TN State Board of Tamilnadu 66

Designing Software
- Plant Design System (PDS)
- Plant Design Management System (PDMS)
- Microstation Ver 7.01
- AutoCAD 2004
- MS-Office Package

Knowledge in Piping
- Preparing of Equipment Layouts
- Instrumentation Drawings
- Preparing of Piping Layouts
- Identifying and Solving the clash reports
- Preparation of Isometric Drawings and Bill of Materials
- Knowledge of relevant codes and standards

Professional Experience

M/s. S.M CHEM POWER PVT LTD

Role : Piping Draughtsman
Duration : Dec 2007 to Jan 2009
Responsibilities :
- Isometric drawings
- Instrument Hook-up, Loop drawings
- Pump suction and Delivery Routing
- Nozzle orientation details
- Fabrication drawings
- Piping layouts and Isometric generation, etc

Present Occupation

SRI MARUTI POWER GEN (INDIA) PVT LTD

Role : Electrical Engineer
Duration : Feb 2009 to Till Date
Responsibilities :
- Operation & Maintenance of Hydro Power Plant
- Synchronising the Machines
- Testing of Equipments
- Solving various kinds of Trippings
- Programming PLC System & Other Electronic Devices

Personal Details
DOB : 16/11/1985
Age : 23
Sex : Male
Nationality : Indian
Marital status : Single
Father’s name : R.Yoganathan
Languages : English, Tamil, Hindi, Kannada.

Declaration

I hereby declare that the information given above are true and correct to the best of my knowledge and belief.

Place: Chennai Yours Truly

Date: ( Praveen Kumar.Y )

Job Code: ELE
Job Description: ELECTRICAL DESIGN ENGINEER

Position at: Mumbai Office

Job Description
Detailed: Graduate / Post Graduates in Electrical Engineering having minimum 3 years experience in basic and detail engineering involving preparation of SLD, Electrical Equipment Layouts, Cable layouts, Earthing layouts, Lighting layouts & Procurement services including Preparation of Enquiries, Technical offers evaluations, Vendor dwgs review etc. Knowledge of softwares, such as ETAP or EDSA will be preferred.

[rlpanchal]

RIVER PARK CHS. - D-302 - NR. DATTANI PARK - W. E. HIGHWAY - OPP. SAIDHAM
KANDIVALI (EAST) - MUMBAI – 400 101
MOB. +91 9833955337 - E-MAIL RLPANCHAL AT REDIFFMAIL.COM

RAJESH L. PANCHAL
PROFESSION
PDS Designer (Modeler) / Operator
YEARS OF EXPERIENCE
10 Years Total (4 Years 6 Month in PDS)
OBJECTIVE
To work in a professional organization with jobs of challenging nature involving modern methods and latest technology.
RECEIVED TRAINING
- Plant Design System (PDS) in Tecnimont ICB, Mumbai.
- Piping Engineering in Tecnimont ICB, Mumbai.
RESPONSIBILITY
Piping Design in PDS. Direct Routing of Line in PDS Referring Intelligent P&ID, Piping Support Modeling Using PSM (Piping Support Model), Equipment & Piping Modeling & Squad Check of Equipment Drawing. Extract & Check Equipment Reports, Resolved Clash Report And Extraction Isometrics
WORK EXPERIENCE

Engineering & Designs Tecnimont ICB Private Limited, Mumbai.

Engineering & Designs Tecnimont ICB Private Limited (Maire Tecnimont ICB Group) is a professionally managed engineering and designing organization having vast experience in the specialized field of setting up of Polypropylene, Off site facilities, Petrochemicals, Refineries, Fertilizers, Chemicals, Power generations, and Utilities Projects. Is Specified in Taking Turnkey Projects.
21st February 2005 – Till date.
Sr. Draughtsman Piping
Working in the piping department for following clients.

- Mangalore Refinery & Petrochemicals Ltd. CHTU
- Takreer Refinery (Abu Dhabi)
- Qapco LDPE Plant (Qatar)
- Taneco Oil Refining Project (Russia)
- Tasnee Petrocamical for HDPE/LDPE Plant. (Saudi Arabia)
- Plock Poland PP/HDPE (Poland)
- Indian Oil Corporation Limited for HDPE Plant.
- Qatar Chemical Company Limited for NAO & PE Plant. (Qatar)
________________________
Tecnimont Planung und Industrieanlagenbau GmbH (Germany).
12th May 2008 – 10th August 2008 (As an Deputation)
Sr. Draughtsman Piping
Working in the Piping & Layout department for following clients.

- Polintor LDPE Plant (Venezuela).
________________________
Tecnimont S.P.A., Milan (Italy).
19th June 2006 – 16th September 2006 (As an Deputation)
Draughtsman Piping
Working in the Piping & Layout department for following clients.

- Qatar Chemical Company Limited for Tin- Points. (Qatar)
________________________
Pipecon Consultants (I) Private Limited, Mumbai.

Pipecon Consultants (I) Private Limited is a professionally managed engineering and contracting organization having vast experience in the specialized field of setting up of Bulk drugs, Pharmaceutical formulations, Chemical and Solvent recovery Plants on turnkey basis or otherwise.
1st December 2004 – 19th February 2005
Piping Draughtsman
Worked in the design department Drafting of Surfactants Plant for following client.

- Galaxy Surfactants Limited for Surfactants Plant.
________________________
Aquatech Industries (I) Private Limited, Mumbai.

Aquatech Industries (I) Private Limited is specified in USP grade of water for pharmaceuticals and chemical industries with total water management solution.
10th February 2003 – 30th November 2004
Piping/Mechanical Draughtsman

Worked in the design department, Design & drafting of RO Plants, UF Plants, Softening Plants, High Purity Water Generation & Distribution System for Laboratories, Pharmaceuticals & Chemical Industries.

- Aventis Pharma Limited for High Purity Water Distribution System.
- Sun Pharmaceutical Industries for Pre Treatment and Reverse Osmosis (RO) System.
- Orchid Chemicals And Pharmaceuticals Limited for Pre Treatment and Reverse Osmosis (RO) System.
- Gujarat Ambuja Cements Limited for Pre Treatment, Softening and DM Plants.
- Hindustan Zinc Limited for Pre Treatment, Softening, DM Plants, Ultra filtration (UF) System and Including Effluent Water Recycle System.
- Ipca Laboratories Limited for Ultra filtration (UF) System.
- Saifee Hospital for Pre Treatment and Reverse Osmosis (RO) System.
- Neuland Laboratories Limited for Purified Water Generation and Distribution System.
- Unichem Laboratories Limited for Reverse Osmosis (RO) System.
- Ranbaxy Laboratories Limited for Reverse Osmosis (RO) System.
- Biocon Limited for Reverse Osmosis (RO) System.
- Smruthi Organics Limited for Purified Water Generation and Distribution System.
- Aurobindo Pharma Limited for Pre Treatment, Reverse Osmosis (RO) System and Ultra filtration (UF) System.

Site Review
Tentative sketch for Equipment layout & pipe routing before Execution of Plant, Discussion with client about queries on their existing DM plant.

- Aventis Pharma Limited (Ankleshwar)
- Coca-Cola India (Goa)
- Neuland Laboratories Limited (Hyderabad)
- Ranbaxy Laboratories Limited (Indore)
- Smruthi Organics Limited (Solapur)
________________________
TCE Consulting Engineers Limited, Mumbai.

TCE Consulting Engineers Limited is Specified in Taking Turnkey Projects of Captive Power Plants with Total Engineering Solution, Services and Execution for following projects.
November 2000 – 8th February 2003 (As an Contractor).
14th October 1999 – 13th October 2000 (As an Apprentice).
Piping/Mechanical Draughtsman

- Indira Gandhi Centre For Atomic Research for Prototype Fast Breeder Reactor Project.
- Bhabha Atomic Research Centre for Additional Waste Tank Farm for Trombay & Tarapur Projects.
- Bharat Petroleum Corporation Limited for Dismantling of existing facilities - Refinery Modernisation Project
- Indian Oil Corporation Limited for Standardisation of Oil terminals / Depotsot.

EDUCATION
April 2001 Mumbai I.T.I. Mumbai
N.C.V.T. (64.13 %)
July 1999 I.T.I. Kurla Mumbai
Mechanical Draughtsman (72.69 %)
March 1997 Udayachal High School Mumbai
S.S.C. (50 %)

COMPUTER EXPOSURE
- Plant Design System (PDS)
- Navis Work
- Smart Plant Review.
- Intergraph MicroStation j (Ver. 7.1)
- CAD Software: AutoCAD (2D/3D) – “14, 2000, 2004”
- Operating Systems: MS-DOS, Windows 98, 2000, XP.
- Application Software: MS Office 2000.

LANGUAGES
English, Gujarati, Hindi, Marathi
PASSPORT INFORMATION
- Passport No.: F 1601547
- Issue Date: 11 January 2005
- Expiry Date: 10 January 2015

PERSONAL
- Date of Birth : 25th September 1979
- Marital Status : Married
- Nationality : Indian

[Guest]

hi to all,
pls give me suggesestion to do the courses which help me to get job in d field of chemical engg. is thr ny courses availlable which will help me out in d plethora of my study...

[Guest]

T.M.MOHAMED FAISAL,
B.Tech. (MECHANICAL ENGINEERING),

EMAIL ID : tm_faisal21 AT yahoo.co.in


CAREER OBJECTIVE :
To work in a organization where I can fuse my creativity with the technical knowledge, thus earn profit for the company and like to grow with it while being enthusiastic and flexible.
________________________________________
EDUCATIONAL QUALIFICATIONS :
Examination
Discipline/
Specialization School/college Board/University Year of Passing %

B.Tech Mechanical Engineering Ponnaiyah Ramajayam Institute of Science & Technology
Thanjavur Deemed University
2011 79.98
DME
Mechanical Engineering Ponnaiyah Ramajayam Polytechnic College Thanjavur DOTE Chennai
2008 69.88
S. S.L. C S.S.L.C Pattukkottai Alagiri
Matric. Hr.Sec. School
Papanasam Matriculation 2005 63

COMPUTER SKILLS :
Languages based on mechanical : Auto CAD
Operating system : Windows 98, XP, Vista, 7 Ultimate.
ACADEMIC PROJECTS :
AUTOMATIC TYRE PRESSURE MONITORING SYSTEM AND JACK CONTROL SYSTEM
FIELDS OF INTEREST :

- THERMAL,
- AUTOMOBILE,
- DESIGN & FABRICATION.

LANGUAGES KNOWN :
English and Tamil to write, speak and understand.

[Guest]

Dear sir,
I am balasubramanian draftsman civil.working in 5 years experiences.i am working r.c.c structural detailing in building and r.c.c bridge detailing and architect building plan.