Kalpataru Constructions Pvt Ltd Mumbai : Architect

[Admin]

Kalpataru Constructions Pvt. Ltd.

Keywords: Key coordinator, drawing, achieve the target, prepare design brief, feasibility report , planning

Designation: Sr. Architecture AGM - KC - N
Experience: 8 - 13 Years
Location: Mumbai, Mumbai Suburbs

Job Description
Key coordinator between site and external consultants.
· Evaluate the external consultant’s drawings.
· Responsible for the correctness of drawings issued on site.

Desired Candidate Profile
Key coordinator between site and external consultants.
· Evaluate the external consultant’s drawings.
· Responsible for the correctness of drawings issued on site.

Company Profile
The Group is a professionally managed conglomerate having diverse interest in Real Estate Development, Power Generation and Transmission, International Trade and property management. To meet the growth plans we require the following high

Email Address: tsc3@vsnl.com

[Guest-IJT]

CURRICULAM VITAE
A CITIZEN OF INDIA
MD SARFARAZ NAWAZ
E-mail : mdSarfaraz.nawaz0 AT gmail.com
Sarfaraznawaz60 AT yahoo.com
Post Applied For
“MECHANICAL AUTOCAD DRAFTSMAN ”
Objective
Seeking a challenging position in “AutoCAD Draughtsman” with the opportunity for growth and eager to work and progress in your esteemed organization,where my experience, training experience meet the required position, and I am always ready to face the challenging task.
Acadmic Qualification
- Madhyamic from Kolkata, W.B.B.H.S.E., in the year Of 2003 with 1st division.
- Higher Secondary Education (H.S) from Kolkata, W.B.C.H.S.E in the year 2005 with 1st division.
- Graduation (B.A) from Kolkata, Calcutta University in the year 2008.
Technical Qualification
- Completed “One year Diploma in Mechanical drafting from CADVISION CENTER Jameshedpur, from March 2010 to March 2011.
- Completed 6th month AUTOCAD Certificate course from CADVISION CENTER Jamshedpur, from September 2010 to March 2011.
Computer skill
- One year “Diploma in Computer Application” from “MODERN COMPUTER”, kolkata from 08/01/2007 to 08/01/2008.
- Sound knowledge in 2D Draughting & 3D Modeling in all the versions of AutoCAD (RI-2006, 2007, 2008, 2009, 2010&2011).
Job Profile
- Sound knowledge of Mechanical, Electrical, Pipeline & Plumbing Drawings.
- knowledge in 2D, 3D & Isometric Design & Drawing
- Knowledge of measuring Instruments & Gauges.
- Detailing and Drafting of Mechanical and Piping Drawings.
- Prepare various piping drawing (Water Pipe,Gas Pipe,Steam Pipe).
- Prepare Layout, view &Isometric Drawing of pipe,
- Assembling the different Machine parts and equipments of Machine by 2D and 3D-Modeling.
- I have successfully done detailed mechanical drawing works various types of the stop vale, steam engine, Rivet joint, isometric object, and orthographic view water pump etc.
- General arrangements and Detailing of Piping Drawings in Isometric or Orthographic projections.
- Maintain and update the drawings by AutoCAD or manually on paper.
- Preparation of Layouts, General Arrangements and detailed drawings independently.
- Drafting of Electrical Line Diagram (House wiring,Industrial wiring, Transformer etc.)
- Preparation of bill of materials for the drawing.
- I can understand the Structure drawings.
- Ability to work in a team-oriented environment and also enjoy work in under pressure.
- Prepared layout drawings and detailed working drawings
- Prepare final detail drawings for production and issued drawings to work shop for production.
- Use excellent level of Ms-Office, AutoCAD (Version- 2006, 2007, 2008, 2009,2010&2011).

[Guest]

RESUME
Name : DESHMUKH NILESH SAYAJI
E-mail : nileshdeh44 AT gmail.com
Objectives : Seeking a position in execution of work on site as a Trainee Engineer and
Trying to do my best
Educational Qualification :
Degree School/College University/Board Percentage Class Year
S.S.C. N.G.V. SCHOOL MUMBAI MUMBAI 77.07% FIRST CLASS 2002-03
H.S.C. D.K.M. COLLEGE MUMBAI MUMBAI 54.50% SECOND CLASS 2004-05
D.C.E
(CIVIL) M.H.S.S. POLYTECHNIC MUMBAI MSBTE 70.77%
FIRST CLASS 2007-08
S.E.
(CIVIL) PDVVPCOE.
AHMEDNAGAR PUNE 60.53%
FIRST CLASS 2008-09
T.E.
(CIVIL) PDVVPCOE.
AHMEDNAGAR PUNE 66.73%
DISTINCTION 2009-10
B.E.
(CIVIL) PDVVPCOE,
AHMEDNAGAR PUNE 73.28% DISTINCTION 2010-11
Technical Skills :
Basic MS-CIT.
Personal Skills :
VERY GOOD LEADERSHIP QUALITIES, EAGER TO DO ALL KINDS OF WORK TO MY BEST PERFORMANCE, VERY CONFIDENT IN ANY SITUATION, VERY HELPFUL, INITIATIVE AND CALM BY NATURE.
Extra Curricular Activity :
- Participated in State level “TECHNOWINGS-10” held in FEB’2010.
- Participated in National Level Model making competition in PDVVPCOE.
- Project Report On BULIDING DIMOLISHING
- Project Report On FLY ASH REPLACING CEMENT.
HOBBIES :
preparing funny poems, playing indoor and outdoor games, listening all types of hindi and marathi songs, drawing and painting, being with friends etc.

[Guest]

JAYANAWAR DEEPALI SHETYAPPA
B.E (Civil Engineering)
E-Mail :- jdeeps.jayanawar2 AT gmail.com

Seeking a challenging position in Construction Company, by giving a strong
contribution to the organizational goals through past experience, to be able to achieve a
given project goal with safety, cost-effectiveness, timeliness and quality.
Total Professional Experience :-4 MONTHS
Working AT Rohit Infra Projects Pvt. Ltd, Thane as a Trainee Engg. From 5th May
2011 to till now.
B.E.
GOVT. COLLEGE OF ENGG., KARAD
Year Exam University Percentage Grade
2009-10 B.E. Shivaji University 68.35% First Class With Distinction
H.S.C
GOVINDRAO JR.COLLEGE ICHALKARANJI.
Year Exam Board Percentage Grade
2003-04 H.S.C. Maharashtra State Board, Kolhapur division 78.67%Agg.
First Class With Distinction
S.S.C
SANE GURUJI VIDYALAY KURUNDWAD.
Year Exam Board Percentage Grade
2000-01 S.S.C. Maharashtra State Board, Kolhapur division 89.53% First Class With Distinction
- Basics of C and programming
- AUTOCAD( Novice)
Title Brief Outline Year
Geosynthetic material
This paper is presented in AAKAR-2K7 at walchand college of engg. sangli. Geosynthetic materials have many applications in construction.

2006-07
Low Cost Housing
This Paper is presented in CESA of Govt. college of engg Karad. Cheap and easiest way of construction of houses.
2006-07
- participated in INCARNO 2010 as a volunteer (National level Technical Meet).
- Participated in workshop on 'The Laws Related To Women' as a Volunteer.
- ‘First Rank’ holder in S.S.C. Examination in the school.
- Recipient of "Certificate Of Appreciation For Second In Kurundwad Center in H.S.C.”
- Positive approach.
- I do admit my mistakes.
- Can handle sudden responsibilities.
- Listening melodious music.
- Travelling, watching movies with friends.
- Collection of information about friends.

[Guest]

CURRICULUM VITAE.
YASH.N.SHETH
E-MAIL : yashnsheth AT yahoo.com
CAREER OBJECTIVE :
To acquire incisive knowledge of Finance Management, and to add value to the concerned organization, as well as to one-self, in this process.
COURSE DETAILS :
COURSE : - Bachelor in Commerce - Accounting &
Finance.
INSTITUTE : - Gurukul College of Commerce.
SPECIALISATION : - Accounts & Finance.
EDUCATION QUALIFICATION :
Qualification Institute University / Board Year of Passing Percentage
T.Y.BCAF Gurukul College of Commerce Maharashtra 2009-10 72.50%
H.S.C S.K. Somaiya College of Commerce Maharashtra 2006-07 60.00%
S.S.C Smt P.G Garodia English High School Maharashtra 2004-05 61.00%
CAREER PROFILE :
1. Everest (S.Narendra Kumar & Co.) as a Accounts Assistant : Dealing with the RTGS & NEFT, Maintain a record of Payable & Receivable, Full & Final Settlement of companies and maintain a record for the same. (From 23rd June,2010 to 31st May,2011.)
2. Ferrari Logistics Pvt. Ltd : Dealing with House Air Way Bill, Master Air Way Bill & relating to the Labelling of a despatched item. (From 1st November,2009 To 30th April,2010.)
PROJECTS DURING T.Y.BCAF COURSE :
1. SEBI : Realating to the money market, credit rating agencies, mutual funds, collective investment scheme, venture capital, public issue of securities, investor protection, buy back of securities, etc.
2. VAT & SERVICE TAX : Tax rates under VAT & Service tax, reverse charge or exception relating to service tax, exemptions of service tax, registration procedure relating to VAT & Service tax, valuation & pure agent of service tax, merits & demerits of VAT, etc.
3. FINANCIAL RATIO ANALYSIS.
PROFESSIONAL SKILLS : Hardworking & sincere towards work, amicable, loyal & tactful person.
IT KNOWLEDGE : Computer (hardware and software)
I hereby declare that the information above is true to the best of my knowledge and belief.

[Guest]

CURRICULUM-VITA
MD.SHAMIMUDDIN
Email :-shamimjsr.uddin AT gmail.com

MD.SHAMIM UDDIN
POST APPLIED FOR : MECHANICAL ENGINEER
WORKING EXPERIENCE :
- 2 years 2 Month experience in Quality Assurance Engineer.
Presently associated with SONI AUTO & ALLIED LTD. GAMAHRIYA (JAMSHEDPUR ).
(1St April to till Date) is an ISO /TS 16949 :2002 company Manufacture of Assembly Ring, the Customer
Company of this is Tata Motors Ltd.

Role & Responsibility : - Quality Asst. Manager.
Job profile :-
- Interaction with customer for any fault
- Implementing KAIZEN / POKE YOKE for the defect detection and prevention.
- Knowledge about PPAP Documents.
- Knowledge about control plane
- Knowledge about FMEA Documents.
- 7 Basics quality Tools.
- Measurement system analysis.
- Control of non conformliity product.
- Make All Types of Documents related 37 POINT CHECK AUDIT.
- Knowledge about QSB (quality Basic System).
- Knowledge About Heat treatment Process (Harding &Tempering)
- Knowledge about All Types of Allied Process for Making Assembly Ring.

NALIN RUBBER PVT. LTD. ADITYAPUR (JAMSHEDPUR) ,
(1ST NOVEMBER 20011 TO 31st Mar 2012) is an ISO/TS 16949 :2002 company manufacture of Moulded Hoses & extruded profile. The customer company of this is TATA MOTORS, INDIAN REILWAY,
Role & Responsibility : - Quality Manager
Job profile :-
- Interaction with customer for any fault
- Implementing KAIZEN / POKE YOKE for the defect detection and prevention.
- Knowledge about PPAP Documents.
- Knowledge about control plane
- Knowledge about FMEA Documents.
- 7 Basics quality Tools.
- Measurement system analysis.
- Control of non comformity product.
- Make All Types of Documents related 37 POINT CHECK AUDIT.
- Knowledge About QSB (quality Basic System).
Lab testing :- Knowledge About All types of lab testing of Rubber material & Quality product .
& Make test Report.
- Hardness testing – Make test sheet & test bottom.
- Ash test.
- Static load Deflection test.
- Tensile & Elongation Test.
- Bonding test.
- Tensile & Elongation Against Air Ageing Test.
- Tensile & Elongation Against Oil Ageing Test.
- Collapse test.
- Specific Gravity test.
- Moister test.
- Adhesion test.
- Coolant test.
- Ozone test.

Polyrub Extrusions (India) Pvt.Ltd (feb’25’11 to 30 oct 20011)(total-8th Month) Pune.
is an ISO/TS 16949 :2002 company manufacture of Hoses & extruded profile. The customer company
of this are GM,VOLKSWAGON,BAJAJ.
Job Profile
- First off and last off inspection.
- Patrol inspection.
- Sample inspection.
- Looking all new development projects.
- All process activity like from component production to component dispatch.
- Interaction with customer for any fault.
- Implementing KAIZEN / POKE YOKE for the defect detection and prevention.
- Maintaining 5s related issue.
- Defects creating monthly PPM report.
- Control of non conformity product.
- Knowledge about control plane.
- Problem analysis & corrective action& follow up.
- Analyze field failures & suggest correctiveon warranty or customer complaints.
- Troubleshoot on line quality problems through expert suggestion & solution.
- Measurement system analysis.
- FMEA.
- SPC.
- 7 TOOLS.
- Knowledge. About the vulcanizing and extrusion process.
.

May 3’10 to Feb. 20’11(10th month) Mesha Engineering Industry Pvt. Ltd., Bangalore as
Quality Assurance Engineer.
It is an ISO / TS 16949 : 2002 company which manufactures Pressure Die Castings in Aluminums Alloy, Zinc Alloy & Precision Machining of Pressure Die Cast Automobile Components.
- Role & Responsibility : - Quality Engineer.
-
- Conducted checking of all the parameter’s settings of machines.
- Analysed first & last shot and updated die information.
- Involved in Document control of all which included customer drawings.
- Implementing KAIZEN / POKE YOKE for the defect detection and prevention.
- Creating monthly PPM report.
- All process activity like from component production to component dispatch.
- Interaction with customer for any fault.
- Raw material testing, analysis and approval.
- Review of product and process non conformance.
- Updating and maintenance of documents, making quality plans.
EDUCATION QUALIFICATION :
2010 B.Tech. (Mechanical) from BPUT, Orissa secured 65%.
2004 12th from GHATSILA COLLEGE GHATSILA JHARKHAND State Board.
2002 10th from M.M HIGH SCHOOL.MOSABANI JHARKHAND State Board.
2012 AUTO CAD-2010 from INDO DANISH TOOL ROOM Jamshedpur. Under Ministry of MSME, Govt. of India Society.
INDUSTRIAL TRAINING
Title : Hindustan copper Ltd. Ghatsila (vocational training in mechanical department)
Duration : 1 Month
Description : power plant, machine shop, acid plant, refinery section, smelter house,
IT SKILLS
Operating Systems : MS DOS, Windows 95/ 98/ XP
Packages & Tools : MS Office 2007
Auto CAD-2010 : Make All types of Drawing (tool Drafting ).
DATE : -
PLACE :- JAMSHEDPUR MD SHAMIM UDDIN

[Unregistered]

Sandhya m. Aamle
E-Mail : sandhyaamle AT ymail.com , sandhyaamle AT gmail.com

Synopsis :
A qualified Architect with 15 years of experience in Architectural Design, Interior Design, Project Management & Execution Overview and Client Relationship Management.
Last associated with V Raheja at Santacruz as a Ass.-Architecture
Expertise in creating comprehensive architectural designs/ built environment, plans, layouts, working drawings, construction details and coordination to ensure execution of projects within time and budgeted parameters.
Adept in comparing the concept design drawings with the design brief and developing the technical detail for the project with the project team.
Demonstrated excellence in project study, analysis, design, development and implementation in real project like; High, Low Raise Buildings & Townships, etc.
For details regarding the Examples / visual images of work with previous employers can be viewed at their websites or the information available on internet.
Exemplary relationship management, communication skills with the ability to networking with project members, consultants, contractors, and statutory agencies with consummate ease.

CORE COMPETENCIES :
Architectural :
Steering the creation of conceptual & schematic architectural designs including plans/layout plans their elevations, etc. and interfacing with clients for approval of the same.
Developing concepts for external facade, interior detailing and integrating the same with structural finish; responsible for drafting of drawings elevations, sections floor plans and layout plans.
Designing and programming stage & setting out design parameters
Coordinating with all the consultants of various disciplines in the building industry, project scheduling, liaison with the various approving authorities and in general, bringing the project up to the execution stage.

Site & Construction Management :
Supervision of on-site construction activities to ensure completion of project within the stipulated time & cost and effective resource utilisation to maximise the output.
Inspecting field sites to observe and evaluate site conditions and feasibility for construction, availability of resources and facilities, and to collect field survey data and measurements.
Assisting in Designing and implementing stringent systems, detailed design and ensuring high quality standards of construction during all the stages of project.
Managing in the tendering and material finalization & advising the purchasing department.

Client Relationship Management :
Articulating the opportunity by making a detailed line presentation of business models and working drawings to the decision makers in the account, using the latest cutting edge technologies.
Interacting with the client and freezing the technical specifications
Developing effective understanding & relations and coordination of design services & specifications.

Career Highlights :
May12 to March 13 V Raheja at Santacruz. as a Architect.

Role & Accomplishments :
Preparation of Master plans / Conceptual plans.
Managing / guiding team of Architects for Design Development, Working & Detailed drawings.
Dec 2010 to April 12 Dellatecnica Pvt. Ltd., at Dadar(E)
as a second lvl –Architecture.

Role & Accomplishments :
Preparation of Master plans / Conceptual plans.
Providing advice to artists for preparation of Sales Documents (Perspectives, Rendered Plans etc.).
Managing / guiding team of Architects for Design Development, Working & Detailed drawings.
Conducted one point of coordination and reporting/briefing to Hod of department.
Executed Model Flat along with Marketing & Site Office.
Handled construction & finishing Materials and Specs finalization.
Conducted Site / Design review and consultants periodic meetings.

Jul 2009 to Dec 2010 Goldmine Project Consultant pvt. Ltd., at Andheri,
-Architecture & Coordination
Role & Accomplishments :
Preparation of Master plans / Conceptual plans (Architectural & Interior Project)
Providing advice to artists for preparation of Sales Documents (Perspectives, Rendered Plans etc.).
Managing / guiding team of Architects for Design Development, Working & Detailed drawings.
Conducted one point of coordination and reporting/briefing to Hod of department.
Executed Model Flat along with Marketing & Site Office.
Handled construction & finishing Materials and Specs finalization.
Conducted Site / Design review and consultants periodic meetings.

Jun’08 to Jun’09 Kaileas savant& Associates at Nariman pointas
As Architecture – Co-ordination.
Role & Accomplishments :
Preparation of Master plans / Conceptual plans.
Providing advice to artists for preparation of Sales Documents (Perspectives, Rendered Plans etc.).
Managing / guiding team of Architects for Design Development, Working & Detailed drawings.
Conducted one point of coordination and reporting/briefing to Hod of department.
Executed Model Flat along with Marketing & Site Office.
Handled construction & finishing Materials and Specs finalization.
Conducted Site / Design review and consultants periodic meetings.

Feb’07 to Jan’08 ARK Design & Associates as Sr. Architect
Role & Accomplishments
Developed presentation drawings, submission drawings and working drawings.
Coordinated with Consultants & Execution teams and periodic site visits.

PREVIOUS ASSIGNMENTS :
SHETGIRI & ASSOCIATES APRIL2005-JAN 2007 Designer
M/S SONAL SHAH MARCH2002MARCH 2005 Assistant Architect
MEHTALIA & ASSOCIATES JULY 1991JUNE 1998 Assistant Architect
KETKI PATEL & ASSOCIATES JULY1987 –JUNE 1991 Assistant Architect
M/S SWATI DIKEARCHITECT JUNE 1986JUNE1987 As a trainee & also in Taj mahal Hotel (Architectural Dept.)work as a trainee

IT Skills :
Computer-aided Architectural Design (CAAD) software programs like AutoCAD and Rendering / Presentation software programs like Photoshop, Corel Draw, Googlesketcch-up, Microsoft Office, etc.

Qualification Highlights :
B.Arch. (Architecture) from IIA, 1992 (Indian Institute of Architecture)
Government Diploma in Interior Designing & decoration From Rachana sansad in 1992 at Prabhadevi.
Certified Course of Vastu ConsultantFrom Vasturaviraj
Certified course of Japanese Language appeared jlpt lvl – 5 exa.

Affiliation :
Registered with the Council of Architecture (COA) and with the Indian Institute of Architects (IIA).

Personal Information :
Date of Birth : 6th July 1967
Language ProficiencyMarathi, English, Hindi. Japanese.

Annexure :
Current Projects :
Redevelopment project as per DCR : 33(7)
Small town Planning of Residential Building at indoor upto 6.50 Acar land, Land Development & Designing for bungalow as per Vastu. Also design for hotel project for Radission at jaipur With Della tecnica
Commercial building Design & landscape designing projects. with Della Tecnica
Designing of Hotel Building, School building, Hospital Building. With Goldmine Project & consultant pvt.ltd.
Designing & supervision + execution of interior project of residential , commercial like State bank of India at Worli (regional office) work carried out above 2.00 lac.wit shetgiri & ass.
Designing & detailing of factory building for BLUE STAR, PRESSION FATENER at Silvassa, BAJAJ at Nasik, PIDILITE at Mahad.with B.MEHATALIA & ASS.
Designing + execution of hospital at Bhuj for Bramaha Kumari Vishva Hindu. Hostel building for NPCIL.(Nuclear Power Corporation India Pvt. Ltd) cost of the project above 10 .00 core.with sonal Shah
Designing of high rise building at Tardeo, hotel building at Goregaon, commercial building at BKC for Bank of India , Oriental Insurance (approval dwg)