Offshore Rig Electrician : Resume

[Guest]

Respected Sir I am forwarding my Cv for any suitable offshore rig Electricain Job. I have 25 years Experience in offshore & onshore.
Thanks & Best Regards

sami Akhtar

CURRICULAM VITAE
Name : SAMI AKHTAR MOHAMMED
E Mail ID : sami_akhterss AT yahoomail.com
Sami_akhtersss AT rediffmail.com
Date of Birth : 05th Apr 1966
Nationality : Indian
Marital Status : Married
Religion : Islam
Language Known : English, Hindi, Urdu

CDC Details : C D C No: MUM XXXXX
Date of issue : 14th Jun 2006
Date of Expire : 13th Jun 2016
Place of issue : India

Permanent/Present Address : Sami Akhtar Mohammed
Orissa Pin : 769001
INDIA

Pride Montana/ ENSCO 91 : Aug 2005 to Jan 2012
** Off Shore Jack up Rig
** Work as an Off Shore Rig Electrician for Saudi Aramco under Pride Arabia Co Ltd & ENSCO Arabia Co Ltd.
** Responsible for trouble shooting. Repair and preventive maintenance on all electrical and generating equipments.
** Maintains/repairs all electrical motors and motor control centre driving various machinery and equipments.
** Maintains/repairs rig manufacturer’s jacking , skidding, Water distillation plant, Sewage treatment plant, Drill Water pumps and winching systems.
** Maintains/repairs Air Condition & Refrigeration plants, Galley Equipments, lighting fixtures and switches fuses, junction boxes including safety equipments, power generators & alarms, Cabling and termination etc.
** Maintains SCR, Elmago Brake & its cooling system, HT/LT Transformers, Cranes, Fire/Gas Detectors & alarm system.
** and performs Company Planned Preventive Maintenance Plan to minimise down time and maximise safety.
** Follows Company policies concerning Safety Meeting, Station Bill assignments.
** Preservation and Inventory control of Electrical Stores.

AL BORZ : Aug 2004 to Jul 2005
** Off Shore Jack up Rig
** Work as an Off Shore Asst Rig Electrician for Iranian offshore oil Company under Selective Marine Services (Dubai) .
** Responsible for trouble shooting. Repair and preventive maintenance on all electrical and generating equipments on Board.
** Maintains/trouble shooting/ Overhauling of all electrical motors and motor control centre driving various machinery and equipments. HVAC / Air Condition & refrigeration Plant.
** Maintains/trouble shooting/Installation/Operation/Termination & Glanding of Controls & Distribution Panels.

Abu Dhabi Ship Building : Nov 2001 to Nov 2003 Work as a Marine Electrical technician.
Installation/Operation/Maintenance/Overhauling/Trouble shooting of Various Naval & Commercial ships /Shipyard Electrical Equipments such as :-
Generators (Make : Caterpillar, Stamford, Detroit, Marapco etc & their associated Controls panels.
** Power Generation & Distribution Systems.
** Light & Heavy duty AC/DC Motors & their associated starters/Controllers. Air Compressors.
** Winches, Cranes, Fire & Bilge Alarm system. Navigational Aids.

Indian Navy : Jul 1985 to Jul 2000
Work as an Electrical Supervisor on board Naval Ships & establishments of Indian Navy. Responsible for Installation, Commissioning, Operation, Planned Preventive & Condition Based maintenance, Testing & tuning trouble shooting of various Electrical Equipments On Board such as :-
** Power generation & Distribution systems up to 33 KV (Sub Station).
** Diesel & Turbo Generators & their associated control panel.
** Boiler & their associated Motors/starter/Controller.
** HT/LT transformers, MCC panels, AC/DC Load Banks with water cooling systems, Crane, Capstan, Winches etc.
** Fire & Gas detection system/ Fire Fighting Equipments.

Academic Qualification :
Graduations (Equivalent) vide Govt of India Gazette No. 9 dated 01st Mar 1986.

Technical Qualification :
Diploma in Electrical Engineering (Equivalent) Certificate vide Gazette of India dated 05th Nov 1983 Part II page 531(Ministry of Defence) New Delhi.

Special Qualification :
(1) Ross Hill Intermediate Course conducted by National Oil well Varco.
(2) Application of Siemens PLC for Rig System conducted by National Oil well Varco.
(3) Basic Offshore Safety Induction & Emergency Training (BOSIET).
(4) Helicopter under Water Escape Training (HUET).
(5) Fire Prevention & Fire Fighting/ Medical First Aid/ Personnel Safety & Social Responsibilities Training Course from “Naval Maritime Academy” Mumbai.
(6) Permit to Work (PTW) /Job Safety Analysis (JSA)/ Gas Tester Training/ H2S Awareness/ Confined Space Entry/ Safe Rigging & Slinging/ Working on height / Lock & Tag out/ Pinch Points/ conducted by Total Safety.
(6) Industrial Safety officer training course from “Soldier Industrial Security Institute” Devlali (Maharashtra) .

Other Experience :
(1) Approximate 10 years practical experience in Computer Application.
(2) Operate Electrical Cranes, Fork Lift, Light Motor vehicles.
(3) Management Preservation & Inventory control of Electrical Stores.

It is certified that above data / Particulars are to the best of my knowledge and will be supported by relevant documents as and when required.

(SAMI AKHTAR MOHAMMED)

[Guest]

Curriculum Vitae
AJAY RAMRAJ SAROJ
Mumbai – 4000 70.
Emailid :ajaysaroj76 AT yahoo.com

Objective :-
The Rig Electrician performs routine preventive maintenance and ensures that machines and equipment continue to run smoothly. The rig Electrician obtains supplies and repair parts from distributors or storerooms. Following a checklist, a rig Electrician may inspect drives, motors and hydraulic systems, check fluid levels, replace filters and perform other maintenance actions. The rig Electriciankeeps records of his work.

Work Experience :-
- Worked as ELECTRICIAN on PRINCES CRUISE SHIP From 18th Jan 2010 to till to date
- Maintenance and repair engine room electrical motors.
- Find out earth fault, rewiring of electrical panel, Maintain electrical reading.
- Maintenance and repair all galley equipment,
- Maintain and repair public area and passenger area lights.

- Worked as ASST. RIG ELECTRICIAN on NOBLE ED HOLTanOffshore Jack Up Oil Rigwith
Jindal Drilling & Industries Ltd. (JDIL) From 1stOct2008to 30thSep 2009
- Install, align, assemble or dismantle, clean, lubricate, move, troubleshoot, inspect, examine, maintain, adjust and repair or replace defective parts of power transmission, vacuum, hydraulic and pneumatic systems, machinery and mechanical equipment, such as pumps, fans, tanks, conveyors, furnaces and generators using hand and power tools, and welding equipment.
- Keep records of work performed.
- Operate hoisting and lifting devices such as cranes, jacks and tractors to position machinery and parts during the installation, set-up and repair of machinery & maintenance of water maker ,Anchor motor, Lifeboat, A.C. compressor, cally, draw works motor gear box.
- Operate machine tools such as lathes and grinders to fabricate parts required during overhaul, maintenance or set-up of machinery.
- Maintenance of Main Diesel engine make caterpillar model D3 -99TA turbo charge after cooled
read blueprints, diagrams and schematic drawings to determine work procedures.

- Worked as ELECTRICIANwithAVA ENGG.From 17th Feb 2007 to 30thMar 2008
- Worked as ELECTRICIAN withGODREJ & BOYCE MFG. CO. LTD. From22ndAug 2006to 04thNov 2006
- Worked as ELECTRICIAN withFIAT INDIA PVT LTD.From 13thApril 2005to 12thApril 2006

Educational Qualification :-
EXAM UNIVERSITY YEAR OF PASSING MARKS
H.S.C Mumbai University March – 2005 50.17%
S.S.C Mumbai University March – 2000 51.20%
NCTVT Mumbai April – 2006 69.20%
ITI Mumbai July – 2003 72.83%

Professional Achievements :-
Passed STCW95 course.
Handling PWD wireman license.

Personal Details :-
Religion : Hindu
Date of Birth : 21st march, 1983
Marital Status : Married
Nationality : Indian
Hobbies : Playing Sports & Music
Languages Known : English, Hindi Marathi

Personal Appraisal :-
- Able to deal, empathetically, with multi-cultural and multi-ethnic groups of people.
- Good communication skills and persistent, ethical and sincere.
- Eager to learn and can easily grasp new techniques.

I hereby state that above statement is true & correct to my belief and knowledge.

Place : Mumbai
Date :

Yours Sincerely,
(Ajay Ramraj Saroj)