www.jbt.in Jam Buster Technology Pune : C Net Winforms

[mskavi]

Jam Buster Technologies

Designation: Sr Dev-c#.Net
Experience: 3 - 5 Years
Location: Pune

Job Description
As a part of the organization as a Software Developer you will be responsible for analyze the requirements of EXFO’s customer support team; produce the system requirement design in collaboration with peers. Based on the design deliver high end quality source code. Demonstrate competence in own area; may still be acquiring higher-level skill. Identifies Works with limited guidance on projects within defined criteria. Provides solutions to a diverse range of moderately complex problems.

Analysis: Analyzes software requirements based on inputs from the customer support team, collaboration with peers and experiential knowledge. Produces project requirements containing system functionality and user interface requirements. Determines final requirements in collaboration with peers.

Design: Designs and implements software systems and product enhancements based on requirements specifications. Produces documents related to these efforts including Architecture Specification Documents and Detailed Design Specifications (DDS). Decides approaches, modeling techniques and provides estimations for schedules, technical scope and required project resources. Participates in technical reviews of requirements and systems design with peers.

Develop: Develops and refines programming code for new software development and product enhancements. Determines algorithms and approaches and recommends solutions and resource allocations. Liaises with internal staff and user to ensure capture of all relevant functionality.

Document: Participates in software documentation process by writing first draft versions technical literature for submission to documentation team. Reviews final prior to release and verifies processes have been followed. Reviews documentation authored by peers and makes recommendations for improvement.

Desired Candidate Profile
Technical Requirements

• You are known for your excellent knowledge of SDLC.
• You are known for your excellent concepts of OOPs, OOAD.
• You have excellent written and verbal communication skills.
• You have extensive experience in C# .NET on windows Form based applications.
• You have extensive experience on working on OS like Win 2000, Win XP or Windows Mobile.
• You are known in completing the assigned tasks with minimum supervision with high quality and on time.
• You are known to rely on instructions and pre-established guidelines to perform the functions of the job. Follows disciplined software development practices.
• You have minimum 3 years of experience in the field of Software development in windows form based projects in C# .NET.

Company Profile
JamBuster Technologies (JBT) intends to be the leading provider of intelligent software for the product/technology development. For JBT, it translates into a focus on the informatics for high throughput experimentation and integrated innovation management for optimal product development.

These web and client-server based applications are critical enablers for product centric companies to gain leadership by reducing time-to-market while focusing their resources on highest potential projects, thereby increase probability of success. In essence, we look to be the technology software development partner of tomorrow's product leader, with a focused product line.

We are leading our business with clients such as EXFO, SYMYX, DOW Chemicals, and DuPOnt Engineering & Air Product. JamBuster Technologies (JBT) helped EXFO this process of setting up its India R&D center (a complete turnkey project).We also JBT offers offshore, outsourcing services for Mobile and Scientific Software development.

Address:
Jam Buster Technologies
303 Swasti Apartment
Rd no 6, Kalyaninagar
Pune,Maharashtra,INDIA 0

Email Address: cv@jbt.in

http://www.jbt.in

Keywords: C Net Winforms

[Guest-IJT]

Name : Veera Kumar
Email : kumarrajulapati AT gmail.com
Designation / Skillset : Mechanical Engineer

Resume :
Rajulapati Veera Kumar
Blindness is not a curse it is a challange. Being a blind person I would like to achieve economic independence and dignity by seeking for a job in Mechanical, Electrical, Automobile Industry where Innovation, Complexity, Productivity plays main role.
About me :
I was lost my eye sight in August, 2010.
Before that I have 14 years of experience in various multi national companies. I joined in need based Computer training in Enable India after loosing eye sight.
There are couple of voice reader softwares(Jaws, NVDA etc.) developed for Visually Impaired persons to work on Computers.
Completed computer training by using Jaws. Now I am comfortable with computers and all set to take new assignment.
Some of the areas where I can contribute
- Generate new projects from Customer complaints and repetitive problems for legacy products
- Product transfer documentation from one place to onother place or one system to another system with the help of PDM & PLM
- Project planning, resources allocation, Monitor, Control & delivery of migration projects.
- Creation of Bill of Material for new products and structure changes for legacy products.
- Can contribute ISO, CMMi , and other standard procedures
- Can be suitable as a HR assistant role and perform the activities like Resume filtering, Sending invitation letters for interviews, arranging interviewswith concerned departments and sending the appointment letters
- Can be suitable as a personal assistant and Admin assistant roles
- Can do Data entry job
- Can do Call centres job
Core Competencies (As Per Previous experience) :
- A dynamic Six Sigma Certified professional with 14 years of experience in Product design & development, Continuous engineering, Reverse engineering, tool design, manufacturing and Project management activities
- Good experience in product design of plastic & sheet metal components in Electro Mechanical & Automobile domain
- Good exposure in generation of concepts & feasibility
- Hands on experience on Failure Modes & Effect Analysis and Tolerance analysis
- Good exposure in GD&T (ISO 8015)
- Expertise in Sheet metal Design, Solid Modelling, Detailing, Assembly, using Pro/E
- Expertise in Product Life Cycle Management, Product data management, engineering change requests and creating structures
- Strong in MS office (Excel, Word, Power Point) applications
- Products worked on : Switch gears, Load Centres, Safety switches, AC disconnects, Circuit breakers, Timers, Dimmers, Thermostats, Pushbuttons, Rotary switches, Cable outlets etc.
- Experience in IEC, UL, NEMA & IP standards
Executive Summary :
- Worked as a Team Leader with BPL Telecom Engineering Services group, Bangalore from 21-06-07 to 18-10-10. Deputed to Schneider Electric Company from 08-08-07 to 31-07-10.
Worked on New product development projects of Installation Systems and controls products.
- Worked as a Lead Engineer with GE India Innovation Centre, Hyderabad in Power distribution equipment division for 7.9 years, from 20-09-1999 to 20-06-2007. Leading the Quality/ Continuous engineering projects in Residential Electrical products like Load centres, Meter Socket Load Centre, AC Disconnect, Safety Switch, Residential Circuit breakers.
- Worked as an Engineer with Jyoti Ltd, Baroda in CAD/CAM department for 1 Year, from 01-08-1998 to 16-09-1999. Involved in the design and development of Moulds, Jigs and Fixtures.
- Worked as an Engineer with Kinetic Honda Motors Ltd, Indore in Tool Design department for 2 years, from 02-09-1996 to 21-07-1998.Involved in Surface modeling of Dies and Moulds and Tool path generation for Manufacturing.
IT Skills
3D Modeling : Pro-E 2001 & Wildfire2.0, Auto Surf and CAMAX
2D Detailing : AutoCAD, Pro-E 2001 and Wildfire2.0
Project Data Management (PDM) : Pro/Intralink 3.3
Project Life Cycle Management (PLM) : My work place (GE) and Symphony (Schneider)
Tolerance Analysis : Crystal Ball, Tolerance Manager, basic knowledge in CETol
Organisational Experience
BPL Telecom Engineering Services Group, Bangalore Jun’07-oct’10
Team Leader(Schneider Electric Company)
- Worked as a team member in Aurora/Exxact Project, which was won the “2011 Red dot design award” in Product design catagory.
- Worked as a Patent Animator to validate the innovative ideas and got the applause award from the Management.
Role
- Design & development of Electro mechanical products comprises of plastic and sheet metal components
- Develop Engineering requirement specification documents based on service functions & constraints provided by the marketing team. The aim of this document is used to understand and technically validate all the requirements of project
- Investigate and development of technical solutions to the service functions called concepts
- Conduct design review meetings with partner to finalize and optimize the concept as per the functionality, ease of manufacturing & Cost
- Refine the parts as per the design guide rules along with proper drafts for plastic parts
- Mould flow analysis by using plastic adviser to identify the best location of gate, plastic flow, Fill time, Injection pressure, Pressure drop, weld lines, Air traps, Cooling quality, Sink marks estimation.
- Perform Theoretical simulation to analyze the critical areas and propose modifications if any
- Conduct DFMEA to identify potential failure modes, its effects in a function of product and identify actions to make design robust.
- Conduct design for manufacturing & assembly reviews
- Optimize the tolerances after performing the tolerance analysis by using statistics to predict future variations of functional conditions depends on making reasonable statistical assumptions
- Make Prototypes to verify the design, check form and fit and assembly on parts
- Engineering Drawing or Transferring tolerances to the drawings compliance with the GD&T as per the ISO 8015 standards for tooling
- Once the tooling has been manufactured, it has to be qualified against the statistical assumptions and models used during development
- Execute pilot run to validate the product and it’s sub-systems fulfils it’s specification. Generate qualification plan and acceptance criteria for Field test as per the IEC standards
- Bill of material generation with the help of PLM
- Liaison between Schneider Electric and BPL Telecom
- Facilitated contract resources to Schneider Electric for the recruitment process
- Conducted interviews to help the HR in recruitment process
- Conducted knowledge sharing sessions on projects and products worked on
- Conducted training programs on GD&T and Tolerance analysis
GE India Innovation Centre, Hyderabad Sep’99-Jun’07
Lead Engineer
Role
- Lead and execute Continuous Engineering projects in Power distribution equipments of enclosed products consists of sheet metal & plastic components
- Develop design concepts and conduct technical reviews with Chief Engineer
- Create complete designs based on conceptual ideas
- Conduct FMEA to identify potential failure modes and develop control plans
- Tolerance analysis, Prototyping and Validation
- Implement cost reduction principles where appropriate
- Control drawing and model releases through an engineering change process
- Communicate frequently to the plant and head quarters in US, understand their requirements and solve quality problems in legacy products
- Apply Six Sigma/DFSS tools in design process
- Helping Plant to execute PCTO and Growth Projects
- Others – UL, CSA, Utility
Jyoti Ltd., Baroda Aug’98-Sep’99
Engineer (CAD/CAM Department)
Role
- Design and development of moulds and fixtures
- Solid and Surface modeling of plastic injection mould components on Pro/E
- Building of large assemblies
- Creation of Manufacturing drawings
- Performing Quality check.
- Manufacturing of the Mould parts, assembly and Trails
- Maintaining good rapport with and among all team members to maintain quality out put
Kinetic Honda Motors Ltd., Indore Sep’96-Jul’98 Engineer (Tool Design Department)
Role
- Wire frame modeling of Press tools, Plastic Mould and Die-casting dies using Auto cad 12
- Conversion of 2D drawings to 3D surface modeling with the help of Auto Surf
- 3D models for electrodes for moulds and dies
- Tool path generation
- Checking the tool path on wooden piece
- Manufacturing of dies and moulds using CAMAX
- Manual programs for CNC MAKINO milling machine with Fanuc Controller
Academic Credentials
2009 B.Tech. (Mechanical) from Institute of Mechanical Engineering.
1996 Post Diploma in Tool Design from Central Institute of Tool Design.
1995 Diploma in Mechanical Engineering from V.K.R & V.N.B Polytechnic College.
Accolades
Bagged Appreciation award for outstanding contribution in supporting the Various Plants in US for improving the product quality 5X times in GE
Certification :
Six Sigma Green Belt Certified
Trainings Attended
- Six Sigma
- New Product Introduction Awareness
- Design for Reliability Awareness
- Cost Out Awareness
- Communication & Presentation Skills
- Creative Thinking
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4361871
Date & Time : 12th Jul 2011 10:41 AM (UTC)
IP Address : 180.215.54.42
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 Firefox/3.6.18
Predicted Country : --