Black Cat Engineering and Construction Qatar : Welding Inspector

[Admin]

Black Cat Engineering and Construction
Designation: Welding Inspector
Experience: 5 Years
Location: Qatar

Job Description
Degree or Diploma with CSWIP 3.1,
Minimum 5 years experience in the field of Oil & Gas.

Desired Candidate Profile
Company Profile
BLACK CAT CONSTRUCTION is a leading EPIC Contractor in the State of Qatar for the Oil & Gas Industry.
Specialties include:
EPIC Multidiscipline Projects
Civil / Structural

Email Address: opu2@asmacs.net

Keywords: Degree or Diploma with CSWIP 3.1, Minimum 5 years experience in the field of Oil & Gas.

[Guest]

Chandran.V
Position Desired : QA/QC Inspector (Welding /Piping/Tank)
Mail Id : vchandran1980 AT gmail.com

Career Objectives

Seek a challenging and admirable position in a reputed organization which may utilize my full potential based on my education and experience .Position should have an opportunity for carrier development and growth with enhancement of skill and expertise.
Summary of Experience
As the details of the resume testify below, I hold a bachelor degree in Automobile Engineering, with certificated course like AWS, API 653 and ASNT Level II.I have more than 9 years professional experience in Oil & Gas field construction and worked as QC inspector (Welding/Piping/Tank),worked with standards like SABIC, ASTM, ASME, API. I ensured that the projects get implemented as per specification in stipulated time with quality. Having equipped and expertise with various latest engineering tools and techniques, my professional career is to produce cost-effective solutions for the organization. I can handle high pressure environments with ease and open mind and can also acts as a good team player.
Educational summary
Professional Qualification :
- Bachelor of Engineering in Automobile from Institute of road and transport technology, Bharathiar University,Coimbatore,Tamilnadu,india with Distinction (1998-2002).
Additional Qualification :
- AWS CWI Certified Welding Inspector. (Certificate No.09023941)
- API 653 – Above ground Storage Tank Inspector.(Certificate No.40416)
- ASNT Certified Penetrating Testing Level II
- ASNT Certified Radiography Testing Level II
- ASNT Certified Ultrasonic Testing Level II
- ASNT Certified Magnetic Testing Level II
Computer Skills :
- Sound Knowledge in AUTO CAD
- Sound Knowledge in Micro Station
- Could operate effectively with Microsoft office tools namely word, excel, power point etc
EPIC for Emergency and Safety College- Ship Mockup structure, Ras Laffan
Professional Experiences
Assignment in Abroad
Name of the Company : ERAM Engineering WLL,Qatar
Name of the Project : EPIC for Emergency and Safety College- Ras Laffan
Position : QC inspector (Welding/Piping).
Period : June 2011 to till date
Job Profile :
- Monitoring the welding activities before, during and after welding
- Monitoring welding activities in Ship Mockup structure.
- Reviewing ISO spool fabrication drawings and NDE matrix.
- Witnessing NDT activities like PT,MT etc
- Preparing of inspection reports like DWR, Fit up etc and maintains these records.
- Check welding procedure specification and individual welder qualification record.
- Check and record welding parameters and verify compliance with approved WPS.
- Provide necessary technical assistance to sub contractor during erection and modification
- Set up a numbering system for the welds, Compile and maintain isometric containing weld numbers and welders identification.
- Ensure that copies of applicable QC plans (QC procedures when necessary) are available at the locations of work.
- Liaise with the area superintendent for corrective action against non-conformances.
- Ensure fulfillment of all inspection and test requirements at all stages as per the QCP and contract requirements and maintain pertinent records.
- Monitor welder performance, receive and review NDT reports.
- Monitor subcontractor’s performance for compliance with quality requirements, wherever applicable.
Name of the Company : JGC Arabia Limited (EPC)
Name of the Project : NCP-North Plot Construction, KSA,
Position : QC inspector (Welding/Piping/Tank).
Period : October 2009 to May 2011
Job Profile :
- Check the pipe spool fabrication based on isometric drawing, QCP and applicable code.
- Conduct integrity inspection and testing activities as per inspection procedures.
- Reviewing ISO spool fabrication drawings and NDE matrix.
- Check dimensions, Orientation, Configuration, Material Traceability, Transfer of heat number Etc.
- Inspect the carbon steels, Low Alloy steels (P11, P22), LTCS, Stainless steel piping from fabrication level to erection level.
- Ensure the implementing of company standard and procedures for welding operations.
- Witnessing the PWHT, HT, FN, PMI activities and review the required documents.
- Witnessing the Hydro testing, Pneumatic testing, and Gravity testing (Leak testing) for both above ground and underground piping.
- Coordinated with the key personnel involved in QA/QC department to sort out problems if raised.
- Offered joints for NDT activities to check welder performance based on client requirements.
- Perform visual inspection after fabrication and released spools for painting and erection.
- Monitoring the welding activities before, during and after welding
- Witnessing for Welder qualification & Procedure qualification
- Verify calibration status of measuring and monitoring devices used for the project
- Raising NCRs in case of deviation from codes and standards.
- Implemented test packages review, line checking, punch listing and alignment checks prior to further test up to reinstatement.
- Coordinate with sub contractor and client on quality issues.
- Witness for all NDT activities such PT, RT, MT and pressure test such air leak test and hydro test.
- Recording of inspection reports and maintain these records.
- Participating in weekly QC meeting and conducting tool box meeting for welders
- Monitoring all welding activities and reviewing all related welding and NDE reports.
- Reviewing test package, doing pre hydro test line walk, preparing punch items and releasing test packages according to procedures.
- Provide necessary technical assistance to contractor during erection and modification.
Name of the Company : Sinopec E&C Middle East Co.
Name of the Project : Saudi Kayan U&O Project (K-080 Area) KSA.
Position : QC inspector -Welding
Period : May 2008 to September 2009
Job Profile :
- Check the welder qualification and welding procedure as per work procedure specification.
- Witness for all testing activities with the client and third party get the final documentation after testing approved by them.
- Responsible in inspection, evaluation and acceptance of ongoing and completed of piping works both in the fabrication and installation correct configuration
- proper welding execution confirming to applicable specification and approved project procedure.
- Check individual weld passes, interpass cleaning and interpass temperature.
- Dimensional check of weld and preparation of inspection report.
- Monitor the work progress and ensure uniformity and consistency in the application of procedure in conformance of project specification requirement.
- Ensure that all piping fabrication/installation are properly carried out and that all examination and test required are performed with satisfactory result
- Perform welding inspection to ensure that all welding activities are properly executed
- Submit inspection punch list clearing in order to close some categories which will affect the holding over of dossier prior to start commission.
- Check welding procedure specification and individual welder qualification.
- Check welds preparation, fit up, cleanliness. Preheat etc.
- Check welding variables with welding procedure specification
- Check placement and sequence of individual weld passes.
- Check back gouged surfaces, inter pass cleaning/temperature.
- Carrying out the line inspection, issue of punch list for piping
- Ensure that all welder and welding specification are fully qualified and implemented.
- Prepare daily progress report for fit up and welding.
- Witness all NDT such PT,RT,MPI and pressure test such air test and hydro test
Assignment in India
Name of the Company : VKN Industries, Trichy, India
Name of the Project : BHEL|Trichy
Position : Quality Engineer
Period : June 2005 to April 2008
Name of the Company : Surya Engineering Services, Trichy, India
Name of the Client : BHEL,Trichy
Position : Site Engineer
Period : June 2002 to May 2005

[Guest]

Rajeesh M.M
E-mail :rejimash2009 AT gmail.com
Objective :
To contribute my skills and expertise in a progressive organization with strong support of an excellent
team for the over all development of the organization and there by enhancing self-growth.
Professional Experience :
Worked as Mechanical Engineer from 16-02-2004 to 28-11-2004 at ESSAR Project-
BALLADILA-VISAGH. Slurry Water Pipe line
Worked as a Mechanical Engineer from 15-04-2006 to 30-03-2007 at MAB Construction.Pvt
LTD Project : SREERAMPADSAGAR Waterline
Worked as a Mechanical Engineer from 01-04-2007 to 04-03-2009 at SHREYA ENG. &
CONSTRUCTIONS Project : GODAVARI LIFT Irrigation
Worked as Mechanical Engineer from 01-04-2010 to 25-01-2011 at M. Sreenivasa
Constructions.

Educational Qualifications :
COURSE
SSLC
PDC
DIPLOMA IN MECHANICAL
ENGINEERING
BOARD/UNIVERSITY
Board of Public Examination
University of Calicut
State Board of Technical
Education
YEAR OF
PASSING
Mar 1997
April 1999
May 2002
PERCENTAGE
82%
48%
67%
Professional course :
COURSE
C.N.C PROGRAMING & OPERATIONS
A.S.N.T LEVEL II Affiliation in Non Destructive Testing
(R.T, U.T, P.T, & M.P.T)
Q SCAN NDT Services
Institute
Year
Sreehari C.N.C Institute 2003
Thrissur
2009
Personal strength :
§ Adaptable to any situation.
§ Good Co-ordination Skills.
§ Leadership quality.

[Guest]

[RESUME OF LOURDHU RAJ .I

i_lourde AT rediffmail.com
ilourde AT yahoo.in
CAREER OBJECTIVE :
To succeed excel in my professional carrier and meet by "employers ultimate satisfaction' through my knowledge and skill by ensuring effective services.
EDUCATIONAL QUALIFICATION :
- Diploma in Mechanical Engineering (First Class)
- ASNT Level - II (UT,RT,MT,PT)
- Registered welding Inspector CSWIP 3.1 cert no 40853.
- Ms Office
EMPLOYMENT DESCRIPTION :
Position : QC Engineer
With M/s Jones Fab, Trichy
Duration : Jun-2008 - till date
Job profile
- Development and ongoing implementation of quality deliverables such as, Inspection and test plans and field Inspection sheets.
- Undertake surveillance and completion inspection of steel work fabrication, surface treatment and pre-assembly functions.
- Issuing and following up of Non-Conformance Reports and field Discrepancies.
- Review and collation of subcontractor Manufacture's Data reports and provide assistance with production of project Manufacture's Data reports.
- Undertake other tasks to support the projects and /or contracts as required.
- Verifying that approved welding procedures, methods and consumables are being used by qualified personnel on all areas of the project.
- Verifying that all construction and fabrication activities have been conducted in accordance with procedures and items conform to engineering specifications, design and codes of practice.
- Conducting visual inspections of welds and repairs of welds in accordance with procedures and codes of practice.
- Monitor welder repair rates in accordance with job quality requirements.
- Provide technical guidance for welding sequence and distortion control in accordance with procedures and job requirements.
- Prepare and issue progressive inspection reports and inspection release notes.
- Review and maintain the inspection and NDT reports
- Preparation and submission of test packages weld map, DIR, NDT reports and other project requirements.
- Preparation of punch list for the job before hydro test.
- Monitoring and witnessing for cleaning, hydro testing and drying activities for station piping.
- Monitoring and witnessing the activities, hydro testing dewatering, air drying, vacuum drying and nitrogen purging for line pipe.
- Conduct internal audits to ensure compliance with internal quality system.
(2) Position :QC Engineer
With M/s Panorama Contracting & Engg. Services, Doha, Qatar, W.L.L.,
Duration : Dec 2006 - Apr 2008
Job Profile
- Perform the daily welding activities as per PQP / ITP.
- Ensure welder's are qualified to the applicable WPS.
- Ensure welding parameters are as per approved WPS.
- Set-up a numbering system for the welds, compile and maintain in ISO metrics drawing sheet.
- Carry out inspection as per the PQP / ITP and contract requirements.
- Preparing daily welding reports verify weld map and ensure compliance to NDT requirements.
- Carried out material inspection before welding process.
- Monitor welder performance and review continuity of qualification.
- Ensure the fit-up clearance for weld such as root face, root gap, included angle, surface condition, and tack welding.
- Ensure the welding consumable as per WPS.
- Monitor welding process, electrode baking and holding temperature.
- Perform visual inspection on weld joints and declare acceptance / repair in accordance with relevant standards, codes and contract specification.
- Review of RT film and NDE reports and maintain
- Execution of all intermediate and final dimensional inspection as per requirement of the approval drawing and quality plan.
- Giving the input to planning engineer with respect to schedule.
- Forecast and plan the activity as per the agreed schedule.
- Plan for resource mobilization.
- Procurement co-ordination and vender follow-up.
- Preparing the recovery schedule meet the progress as planned.
- Giving critical feed back to supervisor to resolve.
- Preparing the site daily progress report.
- Carrying out in process inspection daily.
- Ensuring the availability of latest - AFC documents, approved procedures, drawing etc., in the site for the day to day activities.
- Identifying the quality related potential non conformities and implement corrective measure.
(3) Position :QC Engineer
With M/s Tool Fab Engineering Works, Trichy.
Duration : Feb 2005- Nov 2006
Job Profile :
- Execution of all intermediate and final dimensional inspection as per requirements of the approved drawing and quality plan.
- Under take inspection of welding activities.
- Providing guidance to and influence personal development for welder.
- Influence equipment and consumables selection and waters relating to welding in general.
- Advising engineering, maintenance and contractors regarding welding procedures and practices for design and plant work.
- Filed welding and materials inspection material control punch listing.
- Mention and review work done by QA / AC inspection.
- Mention welder performance and review continuity of qualification.
- Ensure welder's works are qualified to the applicable WPS.
- Explain the WPS to the welder for welder qualification test and witness in association with client / TPI representative as required.
- Review daily welding report verify weld map and ensure compliance to NDT requirements.
- Ensure the fit-up clearance for weld such as root face root gap, included angle, surface condition and treat welding.

(4) Position : NDT CO-ORDINATOR
With M/s Severt NDT Inspection service severt Doha Qatar. W.L.L
Duration : Oct 2005 – Dec 2005
Job Profile :
- Co-ordination with NDT and heat treatment crew to carry out requirement test on the weld joint and evaluation of test result.
- Handled projects as a site in charge for NDT Inspection.
- Submitting daily, weakly & Monthly reports on the NDT activities done.
- Transportation of source from site to site.
- Co-ordination with third party inspection agencies and Qatar petroleum.
- RT, MT, PT, UT. Carried out on piping and tanks.
- Radiography interpretation.
(5) Position : Mechanical Engineer
With M/s Cethar Vessels Ltd, TRICHY
Duration : June 1995 – Aug 2005
Job Profile
- Over seeing all welding production and QA issues.
- Over seeing all construction work being done by contractors.
- Quality reviews and NCR's hydro test, reporting and surveillance.
- Supervising and organising welding & QA / QC activities.
- Coordinating NDT & heat treatment works.
- Coordinating inspections to ensure it meets required standards.
- Visual inspection of prefabrication piping spools as per project drawings and specification.
- Maintain quality records and required specified in the documented procedures.
- Ensure calibration status of testing and measuring instruments and welding equipment.
- Witnessing and reviewing of all NDT reports.
- Monitoring hardness test before and after PWHT.
- Interpretation of NDT as per applicable standards and specification.
(6) Position : Mechanical Engineer
With M/s Sri Lakshmi Industries, Trichy
Duration : Feb 1992 – May 1995
Job profile
- Prepare and issue progressive inspection reports and inspection release notes.
- Supervision, visual weld inspection and test activities.
- Assisting in developing weld procedures & technical work instructions
- Preparation of dimension inspection reports.
- Providing dimensional and welding technical guidance.
- Reviewing contract deliverables with respect to dimension, tests and welding records testing experience would be desirable but not essential.
- Maintenance of Quality registers.

(7) Position : Tech-Up
With M/s Bharat Heavy Electricals Ltd., Trichy
Duration : Nov 1990 – Nov 1991
Job Profile
- Involved drawing preparation tubes and pipes for power, desalination, gas and petro chemical plants. Releasing of group manufacturing specification GMS raisal of raw material.
- Preparation of strength calculation for pressure parts for getting the design approval from Chief Inspector of Boiler.
- Verify approved welding procedures, methods and consumables are being used by qualified personnel on all projects.
- Verify all construction and fabrication activities have been conducted in accordance with the appropriate procedure/s and items confirm to project engineering specifications, design and supplier / vendor shop drawings, and codes.
- Conduct visual inspections of welds and repairs of welds in accordance with PSN procedures, codes of practice and purchase order requirements.
- Co-ordinate and witness all mechanical and non-destructive testing when directed.
- Monitor Welder repair rates in accordance with job quality requirements.
- Provide technical guidance for welding sequence and distortion control in accordance with procedures and job requirements.
(8) Position : Supervisor
With M/s Uma Fabrication, Trichy
Duration : July 1988 – Oct 1990.

Job Profile :
- Verifying that approved welding procedures, methods and consumables are being used by qualified personnel on all areas of the project.
- Verifying that all construction and fabrication activities have been conducted in accordance with procedures and items confirm to engineering specifications, design and codes of practice.
- Conducting visual inspections of welds and repairs of welds in accordance with procedures and codes of practice.
- Monitor welder repair rates in accordance with job quality requirements.
- Provide technical guidance for welding sequence and distortion control in accordance with procedures and job requirements.
- Prepare and issue progressive inspection reports and inspection release notes.

[Guest]

hi sir,
I Am now in Qater, with employment visa with NOC, i want to chenge my preasent visa if u can your organization. i will forward my resume for your kind consideration.
haneefa kuttiyil
Haneefa Kuttiyil Kovummal
E– Mail : Haneefamoideen AT gmail.com , haneefakuttiyil AT yahoo.com
---------------------------------------------------------------------------------------------------------------------
Objective : Obtain a challenging position with a company, offering opportunity for growth and advancement utilizing my 14 years of gulf experience and skills.
Skills :
- Held many responsibilities in the Organization which requires strong organizational skills.
- Ability to work under pressure and even under highly stressed environment.
- Ability to organize materials and information in a methodical manner.
- Ability to communicate information clearly and accurately.
- Honest and Hardworking.
- Ability to work effectively with minimal supervision and training.
- Can handle work in multi-racial and multi-national environment.
- Excellent Communication Skills.
Education :
- 1989 Calicut University Kerala, India Bachelor of Arts ( B A )
- Micro Computer Education
- Diploma on in Computer Application Certificate course in Data Entry
- Typing speed – 50 WPM
- Bits – Tact Tact Certificate in Advanced Business Management System.
Computer Proficiency :
- Operating Systems : Windows 2000, Windows 9x, Windows XP
- Application Software : Excel, Lotus, MS Word, Word Perfect, Access, Clipper, Power Point, Dace Easy & Internet.
Interests and Activities :
- Reading, Traveling & Making good friends.
Languages Known :
- English, Arabic, Hindi and Malayalam.
Work experience :
1. 2003 - 2009 M/S IAL Logistics Emirates LLC. Dubai. UAE. Working as a Field Operation Staff.
a. All Customs Documentations (Port Rashid, Jebel Ali & Cargo Village).
b. Payments and Documents Delivery.
c. CFS Activities like Inspection, Cross stuff, Seal Change, Ship shore Ship, Vehicle Export, Import and Export Inspection, LCL Export, CFS Payments.
d. All Dante activities like Export, Import, and Air to Air, Payments and Airway Bill Execution.
e. E-Mirsal 1 & 11 Document Processing, Office Documentation, and Customers Dealing.
Jebel Ali Activities :
- Customs Related Works like E-Mirasal 1, Payments, Documents Delivery, all CFS Activities, Export and Import Documentation, Terminal Activities.
- Jebel Ali Emigration Works, Visa Procedures, Payments, Visa Renewal.
- Container Handling like Stuffing, Surcharge, Inspection and Municipality activities.
- Issuing Delivery Orders, Collecting Payments and Date Extending.
- Taking Care of Ware House Operations like, Stock Checking, Container Destuffing and Distribution.
2. 1997 - 2003 M/S. AL Bustan center - Dubai (Five Star Apartments Including Shopping Malls) worked as an Accounts Assistant.
a. Preparing Individual Income Statements.
b. Maintaining Files.
c. Catering Management Travel Requirements.
d. Handling day – to – day office mails and attending incoming calls.
e. Store keeping for office stationeries.

[Unregistered]

NAME : TAMILMARAN.M
Email : : tamil.jjmech AT gmail.com

A growthdriven professional with almost 3yrs experience in QA/QC and Welding activites; proven experience of combining strong technical skills, expert process knowledge, communication skills and multitasking capabilities to positively contribute to organizational operations.

Seeking position in QA/QC ENGINEER / WELDING ENGINEER

Profile at a Glance :
Accomplished Inspector with insightful experience in Quality Assurance, Quality control, Welding engineering in sector.
A proactive leader and planner with expertise in Project Quality Plan, Inspection & test planning, Project specific quality related method statements for fabrication/welding/NDT/Handling & Transportation/Hydro Static/Painting procedures etc.
Expertise in Liaising with Clients, Representatives, and ASME Authorized Inspectors, Surveyor and TPIs.
Keen communicator with ability to relate to people across all hierarchical levels in the organization.
Excellent communication, interpersonal and analytical skills with spearheading innovative projects during the career span.
Currently associated with UNISCO L.L.C., Sohar Indestrial Estate , OMAN as In ENGINEER – QA/QC & Welding.

FUNCTIONAL SKILLS :
Well experienced in construction & inspection of pressure vessels, process piping and structures.
Experienced in evaluation & review the WPS, PQR, WPQR using various international codes.
Experienced in evaluation & review the subcontractor’s quality management system, ITP, PQP etc..
Experience in handling SALALAH AIRPORT OMAN projects activity evolved right from starting till project close out.
Dexterous in overall preparation, supervising preparation and submission of QC Dossier.
Skillful in identifying Nonconformance, addressing Non conference report (NCR) and resolving then with proper corrective and preventive action.

Superior Working Acquaintance In Code :
ASME Sec I, II, V, VIII, IX;
ASME B31.1, B31.3 & B 31.4,
AWS D 1.1, API 1104
EN 10204, EN 10025

WORK EXPERIENCE :
UNISCO INDUSTRIAL SERVICES CO. L.L.C (UNISCO), SOHAR , SULTANATE OF OMAN
Quality Assurance/Quality Control Inspector (JUL 2012 – Till Date)

Key Responsibilities :
Reviewing applicable project drawings, specifications and other related documents.
Involved in preparation and implementation
o of Project quality plan (PQP)
o of inspection and test plan (ITP)
o of other QC Procedures and method statement for job execution
o of PWHT instruction sheet according to applicable construction code and project specifications
o of concession request and getting approval on the same from the Client,
o and revision of the ASME Quality Manual
Coordinating with client, representatives, third party inspectors, suppliers for inspection requirements of the project.
Strong technical knowledge in ASME , API,EN , material standards.
Finalizing the subcontractors for NDT, PWHT..
Inspection of structural fabrication, pressure vessel, pipeing & welding activities using SMAW,FCAW,SAW,GTAW& GMAW process.
Controlling over all activities for ASME coded jobs as per the Company's ASME QC Manual.

Handling various welding responsibilities :
o Reviewing of project requirement and preparation of project weld plans.
o Preparing new WPS / PQR based on project requirements.
o Preparing of WPS/PQR using various international standards like ASME IX , AWS D 1.1 , AWS D 1.6 ,
o Welder qualification using various international standards.
Detection and monitoring of hydrogen induced crack, stress corrosion crack in process piping.

Valve inspection : Witness calibration and testing for different types of valves used in oil fields.
Crosscountry pipeline welding, Ultrasonic & Interpretation of Radiographic inspection.
Well conversant in piping isometric and fabrication drawings.
Blasting & painting Inspection ( Surface preparation, Whether condition)
Using various NDT gauges for WFT & DFT measurement. Holyday detection for paint defects & damages.
Coordination with supervisor incharge & QC personal prior to release of all finished product.
System implementationComputer Formats to status reporting, monitoring & Inspection
Final documentation of handling over.

Current Projects :
Currently handling SALALAH AIRPORT PROJECT, about more than 4500ton applying Strong technical knowledge in BSEN specifications as QA/QC ENGINEER.

Projects Accomplished :
Project : Biomass Energy CenterPhase:4 (DIAGEO, Scotland)
Client : M/s Dalkia Utilities Services PLC, UK.
Project Details : Fabrication of Super Heater Coils, Economizer Modules, Headers,
Panels, Riser Supply Pipe, Bed Coil, Boiler Banks and Structural.

Project : Bhushan Power and Steel Ltd., Orissa.
Client : M/s ThyssenKrupp Industries India Pvt Ltd., Pune.
Project Details : Fabrication of Riser & Supply Tubes, Super heater coils & Screen Panels

Project : 1x110 TPH Water Tube Boiler.
Client : M/s HPCL Biofuels Ltd., Bihar.
Project Details : Fabrication of Super heater Coils and Headers.

PREVIOUS ASSIGNMENT :
G.B. ENGINEERING ENTERPRISES PRIVATE LIMITED ,Pudhukubi , Tamilnadu, India.
QA/QC Engineer ( NOV 2010 – JUN 2012)
Responsibilities :
Involved in fabrication activities from material receiving through welding and testing of pressure prates and pressure vessels

PROFESSIONAL DEVELOPMENT :
Technical Credentials :
Certified Welding Inspector (CSWIP 3.1) from TWI Certification No : 64170

ASNT LEVELII Certifications in :
Radiography Test
Ultrasonic Test
Magnetic Particle Test
Dye Penetrant Test
Film Interpretation & Evaluation(RTFI)

Courses and Seminar :
Attended seminar on “Welding Technology” conducted by Ador Welding Limited.

EDUCATION :
2010 B. Tech (Mechanical) from JJ College of Engineering & Technology, Trichy . (Affiliated to Anna University, Chennai

COMPUTER SKILLS :
MSOFFICE
AUTO CAD

PERSONAL PARTICULARS :
Name : Tamilmaran.M
Date Of Birth : 07061986
Sex : Male
Languages Known : English & Tamil
Passport No : H9048225
Email : tamil.jjmech AT gmail.com
Contact Address :unindsco AT omantell.net.om

b]DECLARATION [/u][/b]:
I hereby declare that the above written particulars are true to the best of my knowledge and belief.

Date : Tamilmaran.M
Place : Trichy.