www.vectraglobal.com VCT Tooling & Automation Pvt Ltd Chennai : CATIA V5, Unigraphics Design Engineer

[Admin]

VCT Tooling & Automation Pvt. Ltd.
http://www.vectraglobal.com
vectraglobal.com

Designation: Design Engineer
Experience: 0 - 3 Years
Location: Chennai

Job Description
Exp in Unigraphics NX3/NX5 (or) CATIA V5 for Plastic Injection Mould Design, Automotive BIW (Body In White) Tooling Design, Automotive Plastic Component Design, Shipping Rack Design for Automotive Components, Architectural CAD Design

Desired Candidate Profile
Must have experience in Unigraphics NX3/Nx5 (or) CATIA V5

Company Profile
Design of Automotive Tooling & Components for the US Auto Industry

Email Address: hr@vectraglobal.com

Keywords: Unigraphics NX3 NX5, CATIA V5, Plastic Injection Mould Design, Automotive BIW Body In White Tooling Design, Automotive Plastic Component Design, Shipping Rack Design for Automotive Components, Architectural CAD Design

[Guest-IJT]

CURRICULUM -VITAE

KOUSHIK DUTTA RESIDENCE:

E-Mail: tubai.dutta AT rediffmail.com Vill : Nawabpur
Koushikdutta09 AT yahoo.com P.O : Nawabpur
Mobile: 9474396892 Dist : Hooghly
Phone No: (03212) 225188 Pin : 712701


OBJECTIVE:

Seeking a position to utilize my skills & abilities in the industry that offers competitive at the same time a learning environment to contribute my level best and myself different from the others.

EDUCATIONAL DETAILS:

Degree Dicipline Board/University Institution/college Year of passing Marks Obtained
Secondary GENERAL W.B.B.S.E. Moshat A.M.High School 2001 65.87%
Higher
Secondary SCIENCE W.B.C.H.S.E Sheakhala B.M.High School(H.S.) 2004 54.1%

B.Tech.
E.I.E W.B.U.T Murshidabad
College Of
Engineering &
Technology,
Berhampore
2008 7.34
(DGPA)
SKILLS:

Well known subjects: Principles of electronics, Industrial instrumentation.
INDUSTRIAL EXPOSURE:

Undergone in plant training in: NTPC Limited, Farakka.
Team size : 4
Role : Familiarization training in the department of operation & maintenance.
Duration : 30 days.
Project Description: This project deals about operation & maintenance of an entire system which generate power.

PROJECT DETAILS:

ACADEMIC PROJECT (B.TECH):
Title : Microcontroller Based DC motor Speed Measurement and Control System.
Team size : 4 .
Role : Calibration & Measurement.
Duration : 45 Days.
Project Description : This project focuses on measurement and control of the DC motor speed by using 8051 microcontroller, 555 timer, TSOP1738 infrared sensor, infrared LED, 3 digit seven segment display & one single blade DC motor.

JOB EXPERIENCE:

Worked with Ani infogen pvt ltd as a software developer from july 2008 to December 2008.
After that worked as a graduate engineer trainee with Essel kitchenware Ltd. Dankuni, Hooghly, from april 09 to march 10.

TRAINING:
A three month’s Training on “Automation Technology”(mainly consist of PLC,SCADA & HMI) from WEBEL Automation & Convergence Academy,DN-53,Serctor V,salt lake city,Kolkata-700091

PERSONAL DETAILS:

Date Of Birth: 18th December,1985
Nationality: Indian
Sex: Male
Marital status: Single
Language Known: English, Bengali(can read and speak as well write), Hindi(Only can speak)
Hobbies: Listening Music, Reading Books, Drawing.

ABOUT MYSELF:
I think that I am honest and hard working person that can help to achieve one’s desired goals in life. I have friendly attitude that can help me to get success in any field.
I hereby declare that all the information furnished above is true to the best of my knowledge and belief.

Date:24.6.10
.............
Koushik Dutta

[Guest]

i am madhu gupta doing b.tech from institute of instrumentation engg(formally usic)kurukshetra university. i have also done three year diploma in computer engg. my objective is to enhance technical and professional skills and provide best solutions to the Clients and end Users for the assignment I am working in.my field of expertise is LABVIEW, MATLAB, KIEL,PROTIUS, EMBEDDED SYSTEM. I dont have any experience but i assure you a best quality work. I am famous for my never say die attitude. I have leadership quality too and my dream from childhood is to work with a company like yours. thank you.

[umesh.chunarkar]

CURRICULUM VITAE

Umesh P. Chunarkar
EMAIL- umesh.chunarkar AT rediffmail.com
umesh.chunarkar116 AT gmail.com

OBJECTIVE
Seeking middle level assignment in DESIGN ENGINEER to enhance efficiency of the company and to contribute to the highest potential to achieve the objective of organization that will impact company’s growth and enrich my technical and professional skills by obtaining a responsible and challenging position where my education and work experience will have valuable application.

QUALIFICATION
- S.S.C. with 44.69 % from Amravati Board,
- H.S.C. with 49.12 % from Amravati Board,
- B.E. Mechanical Engineer with 63.21 % from Amravati University,
- P.G. Tool Design & Cad Cam with 76.92 % from Indo German Tool Room Aurangabad.

COMPANY PROFILE
As a Engineer,
4 year experience at INDO GERMAN TOOL ROOM , Mumbai.
The government of India in its endeavor to provide right stimulus for the growth of industry in the country – particularly with a objective of helping MSME’s has established Indo German Tool Room, Aurangabad.
A project of Government on India, Government of Federal Republic Of Germany & Government of Maharashtra, Indo German Tool Room (IGTR) an ISO 9001 :2000, ISO 14001:2004 is a centre which nurtures excellence and provides total tooling & training solutions. IGTR is concentrating on an integrated development of the related segments of the industry by way of providing International Quality Tools, Trained Personnel., Consultancy In Tooling & Related Areas & is constantly crossing new frontiers in quest for excellence & beyond.

PROJECTS
- Design & making of press tools & Product design
- Design & making of plastic moulds ,
- Design & making of forging dies ,
- Design & making of cutting tools.
- Design the product, Assembly-

CAD/CAM SOFTWARE PROFICIENCY
- AutoCAD 2006
- Unigraphics NX-6.0/ NX-7.0
- Catia V5 R19
OTHER
- Having good knowledge of tool room machines like lathe,milling,surface grinding,drilling,etc both Conventional & CNC.

[Guest]

i am balaji from chennai

[Guest]

KARTHIK V
e-mail : karthik88ece AT gmail.com
CAREER OBJECTIVE :
To obtain a challenging position in your esteemed Organization where my excellent Technical, Analytical and Communication skills can be put to effective use in contributing to the organization.
EDUCATION :
Institution Qualification Pass Out Year Percentage
Maamallan Institute Of Technology, Sriperumbudur. B.E (ECE) 2009 66%
P.C.K.G Higher Secondary School, Chennai. XII [HSC] 2005 70%
Madras Christian College Higher Sec School, Chennai. X [SSLC] 2003 75%
WORK EXPERIENCE :
Company Name : Boardex India Pvt Ltd
Designation : Researcher
Responsibilities : Updating profiles.
Duration : 28 March 2010 – 30 September 2011
CERTIFICATION COURSES : (OCT 2011 – FEB 2012)
“Advanced Training in Industrial Automation” in Technocrat Automation
- PLC (PROGRAMMABLE LOGIC CONTROLLERS) :
- Siemens : S7 300 - Simatic Manager, CPU312C Version 5.3
- AB (Allen Bradley) : SLC 500 & Micrologix 1000, RSLogix500, V5.5
- ABB : 07KR51, AC1131 Software.
- GE-Fanuc : IC200UEX626-B-Versapro, Version-2.02.
- Keyence : KV24, Ladder Builder for KV, V1.5
- Omron : CP1E & CPM2A, CX Programmer, V6.0
- SCADA (SUPERVISORY CONTROL & DATA ACQUISITION)
- Wonder ware : Intouch Software Version 9.5
- Intellution : Fix 32 Software Version 7.0.
- DCS (DISTRIBUTED CONTROL SYSTEMS) :
- ABB : AC800M
PROJECT :
B.E PROJECT :
- ZigBee surveillance vehicle with robotic arm and integrated wireless camera.

OTHER ACTIVITIES :
- Won second prize in program debugging held at Easwari Engineering College.
- Represented the college tour programme.

INDUSTRIAL VISITS :
- Ashok Leyland, Ennore
- Thulsiyan Steels, Ambattur
- Wabco TVS, Ambattur.

DECLARATION :
I hereby declare that the details above said are true to my belief and faith.

Date:
Place: (KARTHIK V)