HVAC Engineer : Resume CV

[MUQTAAR]

SYED. MUKTHAIR AHAMED
Email Id : muqtaars AT gmail.com
MECHANICAL ENGINEER (HVAC & PLUMBING AND BUILDING SERVICE)
SUMMARY :
A proficient Mechanical Engineer with 12 years of experience and strong analytical and technical skills. Good understanding of blueprints, schematics and technical drawings. Adept in executing onsite projects as per approved design plans. Expertise in the HVAC & Plumbing and Building Service domain. Recognized for efficient supervision and handling of a range of projects in India and Saudi Arabia.
KEY STRENGTHS :
- HVAC & Plumbing and Building Service
- HVAC Profetional Designing with SMACNA standard
- HVAC Equipment Selection
- DUCT Professional Designing with SMACNA standard
- Duct, Grills and Equipment Execution on SITE
- Installing Firefighting System
- Installing Water Supply System And Drainage System
- Plumbing Execution (Drainage, Water Supply, Firefighting)
- Inter-Departmental Co-ordination (Electrical, Structural and Architectural)
- Efficient Management
- Good Interpersonal Skills
Designing Skills (Shop Drawing) :
- HVAC (Heating Ventilation and Air Condition)
- Water Supply (Gravity System, Pressure System and Pipe Networking System).
- Drainage (External & Internal)
- Plumbing (in American Standard)
- Firefighting (External & Internal), following with NFPA

Calculations Skills :
- Heat Loud Calculation (Block Loud Calculation)
- Exhaust Calculation
- Sealing Diffuser & Grill Calculations
- Fresh Air Calculation
- Duct Calculation. (Equal Friction)
- Presser gage & Inch of water gage Calculations
- Duct heater Calculation.
- Chill water pipe sizing Calculation
- Pump head selections
- Equipment selections
Drawing Skills :
- Comfortable with Architectural drawings
- Proficient in preparing HVAC & Plumbing Designing Drawings in Auto CAD 2000, 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2012, & 2013.
- Skilled in preparing ducting design and calculation in Metric and British systems in SMACNA Standard
- Capable in preparing Fabrication HVAC. Plenum Box from FCU & GRILL and Circular Fittings Ducts. Rectangular Fittings, Ducts and ECT. All Fabrications are done as per company standard.
- Site Co-ordination Drawings
- HVAC Fabrication in AutoCAD and Lentak CAM
- Designing and Shop drawings
- Preparing As Built Drawings
- Specialization in 2D. Touch in 3D

CAREER OVERVIEW :
I have been a part of esteemed companies in Saudi Arabia where my expertise as a Mechanical Engineer along with my specialty in HVAC & Plumbing and Designing were appreciated. Installation and maintenance of a range of supply and drainage systems are my areas of expertise. I am looking for companies where I can dexterously utilize my skills. I am looking for opportunities in Mechanical Maintenance Engineering (HVAC & Plumbing), HVAC Design Engineering, MEP Co-ordination Engineering, HVAC Maintenance Engineering, MEP Supervising Engineering, HVAC site Execution Engineering or Supervising.
WORK EXPERIENCE :
1. Smart Power. Electro Mechanical Contracting Company Feb 2012 till Date
Location : Doha-Qatar
Designation : Mechanical Engineer
Job Sites :
- Faisal El Atteiah Big Villas
- 20 General Villa’s
2. Saudi Oger. LTD. Sep 2005-Aug 2011
Designation : HVAC Design Engineer
H.O.B. Engineering Deportment-Riyadh
OgerClim.Engineering Dirayah – Riyadh
Job Sites :
Team : HVAC Site Engineer & Designing
- South abhor Palace. Buildings.54E, 75, 92, 97, 99, 99a, 103, 106, 745a (JEDDHA )
- AL Salaam Palace. Buildings. 12, Building 105, ( JEDDHA )
- Hawiya Palace. Buildings.201, 211, 215, 217, 218, 402, 406, (TAIF)
- Khalidia Residence Modifications [Villa Prince] (JEDDHA)
- Villa Naeem-Private Residence Project in Naeem Quarter. ( JEDDHA )
- Yamama Palace. Buildings. 21, 22, 37, 38a, 38b, 40a,40b, 41c (RIYADH)
- Alpha Royal Diwan ( RIYADH )
- King Khalid Diwan ( RIYADH )
- KAMC Royal Clinic ( RIYADH )
- Rowad Royal Diwan ( RIYADH )
- Banban Helth Club ( RIYADH )
- King Abdulah TENT ( RIYADH )
- V.R.B.H TENT ( RIYADH )
- L.H.P.R Hotel – King Abdulaziz International Conference centre (RIYADH)

2. Al-Othaishan. Engineering Feb 2000-Aug 2005 :
Location : Riyadh
Designation : HVAC & Plumbing Design Engineer
Job Sites :
- General 50 Bed Hospital (Ministry Of Health) – Khulays.
- General 50 Bed Hospital (Ministry Of Health) – Dhulam
- General 50 Bed Hospital (Ministry Of Health) – Thuraban.
- Prince Abdul Aziz Bin Musaid Hospital AR-AR (Ministry Of Health)
- General 50 Bed Hospital (Ministry Of Health) – Najran (Thar)
- General 50 Bed Hospital (Ministry Of Health) – Najran (Yadama)
- King Fahd Armed Force Hospital –Jeddah (Ministry Of Defense and Aviation)
- Royal Saudi Navy Force Administrative Building – Riyadh
- Prince Sultan Cardiac center- Riyadh
- Technical College of Rafha- Rafha
3. Sri Rama Krishna Construction 1998-1999
Location : CUDDAPAH, India
Designation : Mechanical Design Engineer

EDUCATIONAL QUALIFICATIONS :
- Diploma in Mechanical Engineering from Govt. Polytechnic College, Anantapur- Andra Pradesh, India (1997 to 1999)
- Diploma in HVAC Designing from JACIR Impermatic, Kadapa- Andra Pradesh, India in 1999
- Diploma in AutoCAD from Gayatri Institute of Hardware Technology, Hyderabad, Andhra Pradesh (India) in 2000
IT SKILLS :
- AutoCAD Version R14
- AutoCAD 2000 to 2013
Operating Systems
- WIN95
- WIN98
- WIN 2000
- WIN ME
- WIN XP
PERSONAL DETAILS :
Age : 40 years
Languages Known : English, Arabic, Urdu, Hindi, and Telugu
Nationality : Indian

[Guest]

Dear Sir,

This is reference to our telephonic discussion had today morning. As requested please find attached my CV which I hope you will find interesting.

I am a Mechanical Engineering graduate from National Institute Of Technology, Calicut (formerly Known as REC) with thirty plus years experience in A/C & Air Pollution Control Equipment and Systems. Working with following companies I gained vast experience in design and execution of APC Equipment's.

Air Condituonig Corporation Limited - Chennai - Birla Company
Flakt India Limited - A Swedish company who was a leader in APC technology

Batliboi Environmental Engineering Limited : A air & water treatment company

Shriram EPC Limited : A Chennai based EPC multy division company
KSB AG Germany & KSB India : Manufacture of large pumps and pumping systems world wide.

I also have following fellowships :
FIE : Fellow of Indian Institute of Engineers
Chartered Engineer - India
Life Member : Indian Institute of Plant Engineers
BE (Mech) from NIT Calicut
DBA - Diploma in Business Administration form St. Josephs College of Business Administration, Bangalore.
PG Certificate in Marketing from IIM Bangalore (Deputed by Flakt India)

I trust above information together with my education qualification and experience will meet your requirements and will favour me with an interview. Looking forward an earlier response from your side

Best Regards,

M K Pavithran
Bangalore - 560 076
Mail : pavithran.marayankandy AT gmail.com / pmarayankandy AT yahoo.com