www.elgi.com Equipments Ltd Coimbatore : Mechanical Engineer

[Admin]

Elgi Equipments
http://www.elgi.com

Keywords: FEA Noise and Vibration Fluid Mechanics

Designation: Research Engineer
Experience: 3 - 5 Years
Location: Coimbatore
Education: UG - B.Tech/B.E. - Mechanical
PG - M.Tech - Mechanical
Industry Type: Industrial Products/Heavy Machinery
Functional Area: Engineering Design, R&D
Posted Date: 04 Oct 2008

Job Description
- Identify the gaps between the product cost, quality performance as existing vis-à-vis possibilities
- Conduct exhaustive literature survey and evaluate the present state of the part
- Define and Validate technical concepts
- Convert the concept into detailed design
- Validate each part design towards technology objective
- Sourcing of materials, prototype parts and products
- Generate detailed technical documents of the products
- Handover the technology to the product development group.

Desired Candidate Profile
- M.Tech Mechanical (Fresher)/ BE Mechanical minimum 5 years of experience in the below mentioned skill sets:

- The candidate should have strong exposure to Thermodynamics
o Compressors-Screw, Reciprocating or Centrifugal
o Rotating Equipment
o Turbines
- Machine design – Bearings, Design of structural members- FEA, Shaft design, Gear design
- Structured Dynamics-Campbell diagram
- Noise & Vibration Analysis
- Selection of Coupling anti Vibration mounts
- Heat Transfer
- Fluid Mechanics
- Aerodynamics of Rotating equipments

Company Profile
Elgi Equipments Ltd is the flagship company of the Elgi Group, Asia's largest integrated Air Compressor and Automotive service equipment manufacturer.For over 4 decades ELGI, a leading Indian multinational has been reaching out to discerning clients in more than 40 countries across the world. ELGI now offers opportunities to career -conscious and self motivated professionals to be part of a team that's been the front-runner in technological innovations and world -class service.

ELGI's products are used in a wide range of applications in areas ranging from mining, defence, transport, pharmaceuticals, power, oil, railways, chemicals, textiles, printing to ship building, paper, electronics, telecommunications, medical, food & beverages and plastics.

In fact, starting from the paint on your wall to the car you drive, from the medicines you take to the leather bag you carry, ELGI's products have been used either in their production, maintenance or usage.

Executive Name: Raj kannan S / Sangeetha N

Address:
Elgi Industrial Complex
Trichy Road
Singanallur
Coimbatore - 641 005
India.

Email Address: rajkannan@elgi.com hiringmanager@elgi.com

Telephone: 91-422-2589310,2589118, 91-422-2589555
Fax: 91 422 2573697

Reference ID:
Research Engg-Technology Development

[Guest-IJT]

RESUME

Devendra S Rahangdale Mo.NO.9637921170
C/o Hol Appartment,Dalvi Nagar,Chinchwad,Pune
R.No. 92713323645
E-mail ID- devend.086@gmail.com
deva.086@rediffmail.com
deva.086@hotmail.com

Objective
To obtain a challenging and responsible position where I can contribute to the successful growth of organization, using my skill and hard work.

SYNOPSIS

* Over 1.8 years of experience in 3D Modeling Quality Assurance department.
* Aug. 2008 to till date at CADTECH services as a CAD engineer.
* 1 years at TATA MOTORS LTD. as a Trainee Engineer in CVBU by team Lease Pvt. Ltd., in Quality Assurance Department.
* Hands on experience of Catia V5 R17 such as Part Modeling, wireframe & Surface Modeling, Assembly, Drafting, Detailing.
* Work on CAD Software’s CATIA V5 R-17, AUTO-CAD.
* Knowledge of quality systems like TS 16949, TPM, KAIZEN,5S & POKAYOKE.

Industrial Experience

(1)Company Name
Designation
Period
Tata Motors Ltd, Pune
TraineeEngineer
Aug. 2007 to Aug 2008

Working as Diploma Trainee in Quality Assurance – Press shop reporting to Manager – Quality Assurance.

Job Profile:

* Auditing of sheet metal parts at appropriate & final stages.

* Doing SPC study (Attribute type) for different press operation for conformance level.
* Checking of sheet metal panel on inspection fixture.
* Component drawing study for PLP, Datum & matching area.
* Participate in study of rejection & analysis.
* Control plan study & preparation, monitoring process as per control plan.
* Analysis of problem by 5 why, 8D format to find root cause.
* Having through knowledge of BIW
* Having good knowledge about long member, cross member & reinforcement of frames.


(2)Company Name
Designation
Period
Cad-Tech Institute, Chinchwad, Pune
Cad Engineer
Aug. 2008 to till date

Job Pro file:

* Projects for 3D Modeling,Surfacing,Assembly&Drafting in CatiaV5,Pro-e& A-cad & give approval to concern company.

* Designing, Drafting & Detailing for Grating work in Auto-cad 2006.
* Solid modeling projects done in Catia V5 & Pro-e.
* Sheet metal component done in catia V5.
* Visiting to new company for getting new projects
* Modifying the components as per customer requirement.
* Daily reporting to head of department

Educational Qualification

* Ssc. From Nagpur university with 56.96%(2002)
* Hsc. From Nagpur university with 64.17%(2004)

* Diploma in Engineering (June 2007)

Branch: Mechanical – M S B T E, Mumbai
Percentage: 71.54%


Additional Qualification (Merits)

* Diploma in CAD/ CAM:
* CATIA V5 (R16/17)


Duration: 3 Months
Part Modeling, Surfacing, Assembling and Drafting done.

* PROO-E: 3 Months

Part Modeling, Surfacing, Assembling and Drafting done.

* Auto-Cad: Adequate knowledge about Auto-Cad.

*
o Live Project: Part Modeling & Assembling done for Connecting rod complete.

Client: Bharat Forge Ltd, Pune.

*
o Live Project: Part Modeling & Assembling done for Piston complete.

Client: USHA Auto Ltd, Gurgaon.

3. Live Project: Part Modeling done for shock absorber.
Client: Gabrial India Ltd.

4. Live Project: Grating Work.
Client: Reliance Industries.
5.BLOWER ASSEMBLY
Description: - making 3D model from 2D drafting vies given in drafting sheet.
Work content: -part modeling, pad, shaft, shell, chamfer, radius, hole, multi section solid, drafting & detailing
Client: - CADTECH solution, Pune

Computer Knowledge

* Operating systems: Windows 2000, XP
* Software known: MS - Office


Extraurricular Activity

* Participated District level Cricket tournament & represented our school in Year 2006

* Runner up in Carom tournament during second year Diploma.
* Hobby of reading news paper, engineering drawing reading.

Seminar: - 1. Wire Drive System
2. Group Technology

Project:- Path Finder

Personal Details
Permanent Address : AT: Banjaritola Po: Kalimati, Ta: Amgaon,
Dist: Gondia. (MS)
Present Address : C/o Hol Apartment, Dalavi Nagar, Chinchwad,Pune.
Date of Birth : 13 NOV 1986
Nationality : Indian
Marital status : Single
Speak, Read & Write : English, Marathi,

I hereby declare that the above information is true to best of my knowledge


PLACE: PUNE (DEVENDRA RAHANGDALE)

[Guest]

RESUME
M.PRABHU,
Email : prabhum918 AT hotmail.com
CAREER OBJECTIVE
To be part of an organization where I can learn new things, plan for success and achieve targets, so as to make significant contribution to the firm’s progressive growth.
EDUCATIONAL CREDENTIALS
COURSE INSTITUTION BOARD/UNIVERSITY DURATION PERCENTAGE
B.E (MECHANICAL) J.J. College Of Engg.& Tech. Anna University 2007-2011 78.06
HSC Cheran Matric. Hr. Sec. School Karur. State Board 2005-2007 84.75
SSLC Cheran Matric. Hr. Sec. School Karur. Matriculation 2004-2005 83.45
AREA OF INTEREST
- Designing.
DESIGNING SOFTWARES
- AutoCAD.
- Pro-E.
PROJECT EXHIBITED
- “Exhaust Calorimeter” in J.J .College Of Engg.& Tech., Trichy.
- Rapid Prototyping in PSG Institute of technology, Coimbatore.
INPLANT TRAINING
- TNPL, Kagithapuram, Karur.
- E.I.D PARRY Sugar Factory, Pugalur.
- LOTUS TVS, Erode.
ACHIEVEMENTS
- Got 3rd prize in Aero Modeling.
- Went to Tire-2 in Paper Presentation on “IMPACT OF NANO MATERIALS IN AIR FRAMES”
COCURRICULAR ACTIVITIES
- Active Member in SAE.
- Active Member in TECHNICAL COMMITTEE of our Department..
- Active Member of NATIONAL ENTREPRENEUR NETWORK.
- Department Representative for E-JOURNALS.
EXTRACURRICULAR ACTIVITIES
- Zone Runner and University 3rd in “SHUTTLE COCK”.
- District Runner in “SHUTTLE COCK”.

[Guest]

M.HARISH LAL
E-Mail ID : harish.laal AT gmail.com
SKETCH
- Experience in PPAP & FMEA documents, SPC, 7 QC tools, 5S and 8D report, Root cause analysis.
- Experience in using Trimos , Video measuring scope and Other instruments.
- I have more than three KAIZEN /YEAR is implemented in LLS.
- Experience in ISO document preparation at quality side.
- Handling Calibration of measuring instruments.
- Experience in Microsoft Excel, Microsoft word, Microsoft power point presentation, etc...
OBJECTIVE
- Determined to become an organizer towards Customer satisfaction with leading corporate of hi-tech environment with committed & dedicated people.
- To be a successful leader and a key player in challenging, Creative and professional environment.
- Desire to be a total solution provided for Quality Control and Production.
PROFESSIONAL EXPERIENCE [LLS]
ABOUT LLS
LLS is an ISO 9001/2008 & ISO 13485/2003 [MEDICAL DEVICES] company with an annual sales turnover of 40 crores and is a sister concern of Lakshmi Machine works (LMW). LLS is one of the leading manufacturers of precision plastic components covering the sectors like Medical equipments, ATM machines, cameras, Automobiles and Electrical. Equipped with imported CNC Injection Molding machines like ENGEL & ARBURG and more than 700 dies are running at LLS & Vendor end. It is a towards six sigma company.

TRAINING ATTENDED
- ISO 9001/2008.
- ISO 13485/2003.
- Geometric dimensions & tolerances.
- 7QC tools.

SPECIAL SKILLS
- CNC Programming, Maintenance & EDM.
- UniGraphics NX4.
STRENGTH
- Quality conscience, interest to learn and work on new projects.
- Mentality to work Hard.
- Positive and practical approach with self-confidence.
- Accept Responsibility.
Page 1 of 3
EXPOSURE
- Quality Assurance.
- Production.
- Vendor development.
- Dispatch.
- ISO system functions in all the relevant areas.
RESPONSIBLITIES OF EXPOSURE
1) QUALITY
- ISO document preparation.
- Measuring instruments Calibration.
- FMEA & PPAP documents preparation.
- 8D report preparation.
- SPC.
- Daily quality performance report to management.
- Customer return rejection analysis.
- Non conformance registration and analysis for in house.
- 5S following in quality department.
- Response for customer requirement.
- Following final, inward & patrol inspection, setup approval.
- Knowledge in 7QC tools.
- Flow chart for assembly sequence of operation.
- Control plan preparation for all components.
- Vendor rating preparation.
- 8D follow up at vendor end.
- Prepare Visual check plan for all Components with Photograph.
- Prepare Work instruction for all Measuring instruments & components
2) PRODUCTION
- Production monitoring by shop floor control system in accordance with ISO quality system.
- Analyze Trouble shooting in production.
- Implementation ‘5S’ concept of house keeping for machine shop.
3) VENDOR DEVELOPMENT
- Co-ordinate with Vendor Development People, Audit for Quality Requirement at Vendor end.
4) DISPATCH
- To conduct Dock Audit at dispatch, verify quantity and Quality issues and to given effective packing standard for all the components.
5) ISO
- To Attn internal audit & prepare ISO Documents at quality side.
Page 2 of 3
EDUCATIONAL QUALIFICATION

DETAILS OF WORK EXPERIENCE
1 . Lakshmi Machine Works [Unit – 1]
Position : Industrial Trainee
Experience : 1 year
2 . Lakshmi Life Sciences Limited
Position : Asst. Engineer (QA Dept.)
Experience : From Nov-2005 to till today

[Guest]

Resume
DEGREE : Master of Engineering
BRANCH : Production Engineering(PDC)
PERSONAL DETAILS
NAME : Karthikeyan . S
e-mail : psgplacements AT vsnl.net e-mail: skarthimek AT gmail.com
Course Institution Board/ University Year of Completion Marks % / CGPA
X Sri Gopal Naidu Higher Secondary School, Coimbatore. State Board 2004 88.6
XII Sri Gopal Naidu Higher Secondary School, Coimbatore. State Board 2006 73.53
B.E Sri Krishna College of Engineering & Technology, Coimbatore. Anna University 2010 71.56
M.E PSG College of Technology, Coimbatore. Anna University 2012 7.03*
*CGPA upto third semester
COMPUTER PROFICIENCY
Languages : Fundamentals of Turbo C 3.0 , HTML.
Packages : Microsoft Office 2007,Star Office..
Software : Pro/ENGINEER,Autocad,Ansys.
Platforms Used : Microsoft Windows XP, Windows Vista,
Microsoft windows 2007.
TRAINING DETAILS
- Training in Ambal autos, Coimbatore.
- Kundha power station, Ooty.
- Shanthi Gears, Coimbatore.
- LMW, Coimbatore.
ELECTIVES
1. Design Of Automotive Systems.
2. Computational Fluid Dynamics.
3. IT in Manufacturing.
4. Database management Systems.
FIELDS OF INTEREST
1. Product design and Development.
2. Rapid Prototyping.
PROJECT WORKS UNDERTAKEN
1. Design And Fabrication Of “Spring Rolling Machine”.
2.“Flash Butt Welding Parameters For Low Alloy Steels Using Defect Analysis”. (A project from BHEL,Trichy).
3. Re-design of material handling device for stress relieving furnace.(A project from ROOTS INDUSTRIES. LTD.,Coimbatore).
CO-CURRICULAR ACTIVITIES
- Active Participation In Institutions/Association/Paper Presentations.

- Active member Production Engineering Association.
- Active member of The Institution of Engineers (I) Student chapter of PSG College of Technology.
- Presented paper in KRIYA, PSG college of technology.
- Presented paper in VEL TECH Engineering college.
EXTRA CURRICULAR ACTIVITIES
- College team Volley Ball player [ZONE WINNERS ANNA UNIVERSITY CHENNAI-2010].
- Exponent Volunteer of NSS at sshool level and attended camp for 15 days.
- Best NSS student award in 2006, Sri Gopal Naidu Higher Secondary School.
- Active member of “ENTREPRENEURS CLUB” PSG College of Technology.
- Attended one month inplant training in PSG COMMUNITY RADIO, PSG College of Technology.
- Active member of Society of Automotive Engineers(SAE), I represent as membership chair of SAE Collegiate club, Sri Krishna College Of Engineering And Technology.
- Attended two days training program in PSG college of Technology on the topic PNEUMATIC CIRCUITS AND DESIGN organized by FESTO.
- Attended “Entrepreneurship Awareness Programme” sponsored by all India council for technical Education(AICTE)
- Coordinated Trekking Program and Seminar at college level, Sri Krishna College Of Engineering And Technology.
- Coordinated events in “Technical Symposium”, Sri Krishna College Of Engineering And Technology.
- Active member of College cultural club, Sri Krishna College Of Engineering And Technology.
- Organized cultural events in Sri Krishna College Of Engineering And Technology.
HOBBIES :
- Singing
- Listening to music
- Photography
I, KARTHIKEYAN. S, do hereby confirm that the information given above is true to the best of my knowledge.
SIGNATURE : _________________________

[Guest]

I wish to be employed in your recognized company