Nagarjuna Construction Co Ltd Asansol : STRUCTURAL FABRICATION ENGINEER WALK-IN

[Admin]

Nagarjuna Construction Company Limited.

Designation: WALK-IN INTERVIEWS FOR STRUCTURAL FABRICATION ENGINEERS

Experience: 7 - 12 Years
Location: Asansol

Job Description
Managers / Deputy Managers / Senior Engineers / Assistant Engineers / Junior Engineers / Supervisors: (FAB/BOK)
Graduate/Diploma Engineers in Mechanical engineering with 05 to 20 years of experience in Structural fabrication works and having fair knowledge about planning of work, welding procedures, resource allocation, NDT requirements and material reconciliation of Industrial building / structures / projects.
All positions are currently based in Burnpur, West Bengal. Candidates willing to work anywhere in India should apply. Designations, salary and benefits will be commensurate with qualification and experience.
WALK-IN for an interview on 01-11-2008 and 02-11-2008 from 09:00 AM till 03:00 PM at the address mentioned below.
Hans Regency Hotel,
Sector 1 - Market, Near Ram Mandir,
Bokaro Steel City, Jharkhand - 827 001
Contact on: 06542-240896 / 97 / 98 / 99
To register yourself for walk-in interview, call Mr.Papa Rao on +91 9332029192 / Ms.Jyotsna on +91 40 30525348

Company Profile
Over 27 years of building a strong infrastructure base, an annual turnover close to Rs.3500 crores and above all, the determination to leave the NCC mark of quality in all areas of infrastructure development. Our divisions include Industrial Structures & Buildings, Transportation (Roads, Bridges & Flyovers), Electrical Projects (EHV/HV Substations, Transmission & Distribution Projects), Water & Environment Projects(Pipelines & Treatment Plants), Hydropower Projects, Irrigation Projects. A 4200 strong workforce shares our philosophy of work to exceed expectations and deliver international standards of excellence.

Address:
Nagarjuna Construction Company Limited
6-3-1090/A/7,
IMS House Complex, Near Fortune Katriya,
Rajbhavan Road, Somajiguda,
Hyderabad,Andhra Pradesh,INDIA 500082

Email Address: vinay.v@nccltd.in
http://www.ncclimited.com

Keywords: Structural fabrication works, planning, welding procedures, resource allocation, NDT requirements and material reconciliation, Industrial building, structures, projects

[Guest]

CURRICULAM VITAE
K.KARTHIKEYAN,
kalikarthi_78 AT yahoo.co.in

Career Objective :
Willing to take challenging position in the Engineering/Fabrication. Industry and trying to improve my Knowledge in the Engineering /Design field.

Total experience -13 yrs

Sl.no Name of the company Designation Products No of Years :
1 M/s. Promac engineering industries ltd, Bangalore Manager -Fabrication Cement plant equipments Jan 2010 to till date
2 M/s.Avasarala technologies Ltd ,Bangalore Assistant manager Fabrication
(Production) Nuclear Products, Cold Traps, Vessels(SS&CS), Conveyors
Aug 2007 to Dec2010
3 M/s Southern Wind farm Ltd (RELIANCE GROUP COMPANY, FORMERLY
NEPC INDIA LTD ) Coimbatore Project Manager
(Erection) Wind Turbine- Capacity 225 KW &750KW Aprill’2004-July’2007
4 M/s Mahalakshmi Engineering Enterprises, Trichy -15 Production Engineer Structural (Columns, Beams) Ducts (April’98-April’ 2000)
5 M/sTech Fab Industries
Trichy-15 Production Engineer Structural(Coloumns,Beams) Ducts (June 2001-March’2004)
6 BHEL ,Trichy Technician Apprenticeship training in Quality control &Production Dept. Nuclear Vessels and other components April2000-April2001

Training :
CNC Operator training Programme at Tiruchirappalli Regional Engineering College Trichy –15.

Software Skill Sets :
Knowledge of SAP (MM) :
- Process knowledge ,
- Vendor master creation,
- Material master Creation
- Basic of MM module
- Purchase Requisition
- Purchase Order (material, text and service)
- Sub-contracting -Inventory Management
- Stock Transfer & Stock Transport Orders
- Invoice Verification,
- Batch Manage
- Stock Transfer
- Concepts on MM
- Master data
Operating Systems : Windows xp, Windows 2000, 98, MSDOS.
Programming Languages : C, Pascal.
Package : AutoCAD 2002, Knowledge of Pro-E

Experience :
Presently working in M/S. Promac Engineering industries, Bangalore
Working as Manager (Fabrication-Production)
Roles and Responsibilities :
- Preparation MIS (Management information system)
- Controlling subordinates ,workers(Direct & Indirect)
- Material Planning as per Drawing requirement
- Qualifying the welders as per ASME SEC IX
- Man power allocation
- Train the welders
- Inspecting the Components during production
- Maintaining log books for welding rod storage in oven
- Fixture Planning for to control distortion during welding
- Consumables Requirement planning like Filler metals, Grinding wheels …
- Visual inspection of weldments during welding
- Guide the welders during welding
- Selection of new welders whenever required
- Sending daily report to higher officials

Roles and Responsibilities :
M/s .Avasarala technologies ltd
- Preparation WPS,PQR,WPQ,WDS (As per ASME / AWS Standards)
- Qualifying the welders as per ASME SEC IX
- Preparation MIS (Management information system)
- Material Planning as per Drawing requirement
- Man power allocation
- Train the welders
- Inspecting the Components during production
- Heat in put Techniques for GTAW/SMAW Process to Control Distortion techniques(While stainless steel Fabrication)
- Maintaining log books for welding rod storage in oven
- Fixture Planning for to control distortion during welding
- Consumables Requirement planning like Filler metals, Grinding wheels …
- Visual inspection of weldments during welding
- Guide the welders during welding
- Selection of new welders whenever required
- Sending daily report to higher officials
- Controlling subordinates ,workers(Direct & Indirect)
- Cost consciousness
- We are Fabricating the Nuclear components both Stainless steel and Carbon steel Tanks , Structural’s, Conveyor frames and Pallets as per IS2102,ASME STANDARDS
- Our customers are IGCAR, BARC,AREVA,L&T,FORD,BHAVINI,ISRO,
- Convenience the Customers like NPCIL, IGCAR, BHAVINI
- Co ordinate with team members to achieve the target with in stipulated time
Wind mill Experience

- SOUTHERN WIND FARMS LTD :
[Aprill’2004-July’2007]
- 6 Months worked in MADHYA PRADESH for 750 kw WTG
Roles and Responsibilities :
- Project planning
- Project execution
- Project report submitting
Fabrication Experience
- Mahalakshmi Engineering Enterprises
[April’98-April’ 2000]
- TECH FAB INDUSTRIES ,Trichy
[June 2001-March’2004]
Roles and Responsibilities :
- Preparing Dimensional Report and Inspection Report.
- Inspecting Welding Defects Like Liquid Penetration Inspection Test (LPI), Magnetic Particle Inspection Test, Knowledge About Radiographic Test (RT) and Ultrasonic Test (UT).
- Study of Various Types of Boiler Drawings.
- Inspecting the Boiler Components and Boiler Supporting Structures as per the Given Drawings.
- Preparation of Cutting Plans, Dimensional Reports.
- Inspection we met like BHEL Customers National Thermal Power Corp (NTPC), Indian Institute of Quality Assurance (IIQA), Tata Projects Ltd (TPL), and Quality Evaluation Systems Team Pvt Ltd (QUEST).

Educational Qualification :
MBA (PROJECT MGT) : Alagappa University
Year : June 2009
B.E (MECHANICAL)
Institution : National Institute Of Technology (Formerly REC): Trichy – 620015.
Year : June 2000 to November 2003

D.M.E :
Elective : Automobile Technology
Institution : Arulmigu Kallalagar Polytechnic, Melur, Madurai.
Year : April - 1995 to April -1998

H.S.C :
Institution : K.A.P.viswanatham Higher sec. School,
: Thillainagar, Trichy-18.
Year : April-1995

SSLC :
Institution : K.A.P.viswanatham Higher sec. School,
Thillainagar Trichy -18.
Year : April 1993

Personal Information :
Name : K.KARTHIKEYAN
Father’s Name : M.KALINGARAJ
Date Of Birth : 16 May 1978.
Religion : Hindu
Nationality : Indian
Marital Status : Married
Languages Known : English, Tamil, Hindi. Kannada
Driving License : Valid Two Wheeler (MCWG), LMV Driving
License Valid up to 2024.

[Guest]

JEEVANANDAM D
E-mail : djeeva_1985 AT yahoo.co.in
djeeva_85 AT rediffmail.com .
------------------------------------------------------------------------------------------------------------
Respected Sir,
Discipline Applied for : - Manufacturing Engineer / Project Engineer.

I would like to place me before you as a right candidate for any of the above Disciplines at Intermediate levels. Enclosed herewith my detailed resume for your perusal and kind consideration.
I shall exhibit my motivated sprits and skills in your esteemed organization and assure you of my honesty, Sincerity & hard work.
Awaiting your favorable reply,
Professional Objective :
Looking for a Challenging career in your esteemed Organization that offers professional growth
While being resourceful, innovative, and flexible and to be the part of team working towards Organization’s success.
Summary
- Current Company - Mech Fab engineering works (P) Limited, Maraimalai Nagar, Chennai.
- Degree - B.E Mechanical Engineering
- Current location - Chennai
- Current CTC - 3.6 Lakhs/Annum
- Expected CTC - 5.0 Lakhs / Annum
- Notice Period - With In One Week
Total Experience : 5+ Years.

Organization Designation Duration
Mech Fab Engineering Works (P) Ltd, Chennai.
Sr.Engineer -Production/QC. From March 2007 To Still
Metal Scope India Pvt.Ltd Pondicherry.

Production In charge.
From Dec 2006 To Feb 2007
Fabricon Engg Works (P) Ltd, Pondicherry.
Engineer – Production / Quality From June 2006 To Nov 2006
Technical Skills :
- Operating System : WINDOWS XP
- Package : AutoCAD-2006.
- ISO : Contracting the Internal Audit & Vendor Process Measures & Supplier Rating.
- Non Destructive Testing (NDT) : ASNT Level II. ( RT, UT, PT, MT )
Soft Skills : : Leadership and Motivation Skills, Commitment, Planning and Organization, Flexibility.
In Plant Training Undergone :
- Neyveli Lignite Corporation, India.
Training undergone : Thermal Power Station.
Field Experience :
From April 2006 to till date : Working as Project Incharge (Planning, Production&Q.C). Directly Reporting to M.D
Organization : Mech Fab Engineering Works (Pvt) Limited, Chennai.

A Joint Client between Mech Fab engineering works (p) Limited engaged in Manufacturing & Supply of Sugar Industrial machinery, Cement Plant Machinery, Oil and Gas machinery Equipments like Heat Exchanger, Evaporator Assembly, MDT Vent Stack, Condensate Storage Tank, Pressure Vessels Up to 120 bar Capacity & Boiler Pressure Parts. And Erection & Commissioning of Sugar Industrial Machinery, Cement Plant machinery, Oil & Gas Machinery and Equipment of India and Overseas.
Responsibilities :
- Study the Equipment Structural drawings & Estimation of
Material cost.
- Planning & deciding whether to purchase or subcontract.
- Deciding Purchase Technical Specifications & Quality
Assurance Plan.
- Identifying the Vendors to allocate the various jobs.
- Ordering and follow up with Vendors.
- Releasing of Payments to vendors In Co-Ordination with Accounts Dept.
- Making Negotiation with Vendors Independently for releasing the orders.
- Releasing of Purchase Order and Terms, Conditions of Excise value.
- Fixing of Price for different Components.
- Allocating Standard Electrodes for Jobs to vendors.
- Project monitoring & Co – ordinating by use of PERT Charts.
- Final Inspection & Quality Test like U.T., R.T and DPT
TEST (NDT) Carried out with client.
- Plan, direct and coordinate activities through out all areas of
Production to ensure that target is achieved.
- Preparation of detailed plan from raw material to dispatch.
- After Completion of job arrangement of transport to customer.

PRODUCTS MANUFACTURING :
Boiler Non – Pressure Parts Components :
- Boiler Columns, Tie & Floor Beams, Supporting Structure & etc.
- Ceiling Structure, Coal Bunker, & Vent Stack.
- Manufacturing and Supply of Travelling Gate Assembly.
- Manufacturing and Supply of Air Venturi.
- Manufacturing and Supply of Droplet Separator Assembly.
- Manufacturing and Supply of Cane Carrier Platform and assembly.
- Manufacturing and Supply of DMPIWST Tank and Assembly.
- Bagasse Silo & Supporting Structure.
- Steam Drum Internals Assembly.
- Air Heater Block Casing, Air Pre-Heater, Air Heater Tube Sheet.
- Boiler Header Supports & Steam Drum ‘U’ Rods.
- Economizer Casing, Hopper, Supports.
- Buck Stay Assembly, Wind Box.
- Flue Gas and Air Ducts & Supports, Bracings.
- Roof Truss & Purling, B.L. Heater, Ash Mixing Tank & BL Gun.
- Green Liquor Cooler, Hot Water Direct & In Direct Heater.
- Shaker Clarifier Mechanism, Air Ports, Air Nozzle.
- Over Head Tank, Air Receiver Tank, Smelt Spout Hood.
- Mixing Tank, White Liquor Clarifier.
- Feed Water Storage Tank, Front Wall Lining.
- Manhole & Fire Door Assembly, Peephole Assembly.
- Wash Tank, Blow down & Blow off Tank.
- Flash Tank & MDT Tank.
- Condensate Tank, Acid Tank, Feed Water Tank, Hot Well Tank.
- Surface Condenser & Evaporator Bodies.
- Manufacturing and Supply of Condensate Make up Tank.
PRODUCTS MANUFACTURING :
Sugar Unit Components :
Cane Preparatory Section :
1) Cane Unloader.
2) Arrangement of Cane Carrier.
3) Chopper, Leveller, Cutter.
4) Shutter, Fibroses, Fibroses Carrier.
Milling House Section :
1) Inter Carrier, Mill Gang Way.
2) Juice Tray.
2) Whriler Tank, Gutter.
4) Screened Juice Tank.
Boiling House Section :
1) Juice Heater, Semi Kestner, Evaporator.
2) Juice Sulphitor, Lime Tank, Lime Classifier Tank, Runoff Tank.
3) Vertical Crystallizer, Air Cool, Seed Crystallizer.
4) Continuous Vaccuum Pan, Batch Vacuum Pan, Syrup Tank.

PROJECTS HANDLED :

- M/S. DHARANI SUGARS LIMITED.
(110 TPH Boiler & Sugars Unit)
- ITC LIMITED, MAHARASHTRA.
- M/S. KRISHAN VENI SUGARS LIMITED.
(110 TPH Boiler & Sugars Unit)
- CHETTINAD CEMENT LTD, ARIYALUR.
- M/S. JAY MAHESH SUGARS LIMITED.
(135 TPH Boiler & Sugars Unit)
- ACTION ISPAT LTD, JARSHUGUDA, ORRISA.
- M/S. SIRUGUPPA SUGARS LIMITED.
(110 TPH Boiler & Sugars Unit)
- CAUVERY POWER GENERATION LTD, TAMILNADU.
- M/S. DHANALAKSHMI SUGARS LIMITED.
(110 TPH Boiler & Sugars Unit)
- M/S. RAJESHREE SUGARS LIMITED.
(110 & 50 TPH Boiler & Sugars Unit)
- M/s. FINCHAA SUGARS LIMITED.
(125 TPH Boiler & Sugars Unit)
- TNPL, KARUR, TAMILNADU.
- IND-BHARATH THERMAL POWER LTD, TUTICORIN.
Clients :
- GEA COOLING TOWER TECHNOLOGIES (I)
PVT.LTD, Chennai
- ENMAS ANDRITZ (P) LTD, Cheenai.
- F.L SMIDTH MINERALS LTD, Chennai.
- FIVES CAIL- K C P, Chennai.
- GREENESOL POWER SYSTEMS (P) LTD, Bangalore.
- BGR ENERGY SYSTEMS LTD, Chennai.
- THERMAX LTD.
- METSO POWER LTD, CHENNAI.
- SHRIRAM EPC LTD, CHENNAI.
- L&T LIMITED, CHENNAI.
TRAININGS & SEMINAR:-
- Thermal Power Plant Training – NPTI, Neyveli.
MEMBERSHIPS:-
- Indian Society of Mechanical Engineers

[Unregistered]

CURRICULUM VITAE
NAME :-CHIRANJIT NAYEK

PERSONAL DETAILS :
State :-West Bengal,
Mail : chiranjitnayek77 AT gmail.com
Date of Birth : 23th’March, 1990
Sex : Male.
Marital Status : Single.
Nationality : Indian.
Language : Bengali, English, Hindi.

Career Objective :
I believe in putting the best of my effort in whatever I do and come out with the best possible result. I am eager to take new challenges and responsibilities. I think my attitude towards hard work will result in a long lasting mutually beneficial relationship with your organization.
Educational Qualifications(General) :

EXAMINATION NAMEOF THE INSTIUTION BOARD/UNIVERSITY PERCENTAGE :
Madhyamik Kharar Sri Aurobindo
Vidyamandir W.B.B.S.E 46.50
Higher Secondary (Arts) Kharar Sri Aurobindo
Vidyamandir W.B.C.H.S.E 56.00

Hobbies :-
1. Playing cricket.
2. Gardening.

Declaration :-
I do hereby declared that all the information furnished above are true and correct to the best of my knowledge.

Date : 14/03/2013 Place:Berhampore… ……………………..
Signature

[Unregistered]

MY RESUME :
NAME : DINESH SHRIPAD SARAF.
DATE OF BIRTH : 13/04/1959
Dhavali Ponda Goa 403401, INDIA.

emai ID : dsaraf59 AT gmail.com / dsaraf61 AT gmail.com

EDUCATIONAL QUALIFICATIONS :
1. (X) S.S.C. (passed in 1975)
2. XII Science (passed in 1977)
3. Diploma in Mechanical Engineering (passed in 1980)
Presently I am running my own business of Structural Fabrication and Erection and Roofing works under title of SARAF INDUSTRIAL SERVICES for last 20 years from Jan 1992 onwards.

EXPERIENCE :
1. 5 Years as Service Engineer / Mechanical Engineer (from 1980 to 1985)
2. 5 Years as WORKSHOP MANAGER for Fabrication & Erection Engineers (from 1986 to 1991)
3. 20 Years as Proprietor of my own firm SARAF INDUSTIAL SERVICES which undertakes Structural Fabrication & Erection and Roofing works for all type of Industries in Goa.

My responsibilities includes :
1. Visiting clients for their requirement of Structural fabrication & Roofing works and collecting drawings and necessary data like location and dimensions and specifications.
2. Studying the drawings, suggesting the changes in specifications and design if necessary.
3. Preparing drawings of Structural steel like TRUSSES, COLUMNS, PURLINS, BRACINGS etc. if required.
4. Preparing quotation and Bar Chart and submitting to clients and negotiating with client.
5. Preparing and submitting the Bill of Quantity on receipt of order for procurement of material.
6. Negotiating with Subcontractors and finalizing the terms and conditions of subcontract.
7. Execution of project in coordination with other related agencies and completion of project within schedule time limit maintaining necessary quality.
8. Preparing the Bill of quantity and bills for the work completed and submitting the Bills to client.
9. Finally follow up with the clients till the payment is received.

SPECIAL TRAININGS / COURSES COMPLETED :
1. Entrepreneurship Development Programme organized by ECONOMIC DEVELOPMENT CORPORATION OF GOA, DAMAN &DIU LIMITED at Panaji Goa from May 1987 to July 1987.
2. Course in AutoCAD 2000i (Basic) from 17 Oct, 2001 to 23 Nov, 2001 by EDC CAD CENTRE Panaji Goa.
3. 6 months In-plant Training at Cummins diesel sales and service ltd. Pune Maharashtra,India.
4. 6 months field Training at Western India Sales and Services GOA.
5. 1 month Inplant Training at TVS Motors, (at Chennai) Authorized dealer of Ashok Leyland Ltd., Chennai.

Some of my clients for whom I have executed similar jobs in the past. :
KODAK (India) LTD.
Nestle (India) Ltd.
MRF LTD.,
Larsen & Toubro
ALPHA LAVAL LTD.
KORES (India) LTD.
Emerrck (India) LTD.
McDowell and co. Ltd.
Ranbaxy (India) LTD.
National Institute of Oceanography, Dona Paula Goa.
Crompton Greave Ltd. (for Goa Electric and Fans Ltd.)
P.W.D. Goa Govt.
Goa Cricket Association
Chowgule $Co. Pvt. Ltd.
M Venkat Rao Infra Projects Pvt. Ltd.
Damodar Mangalji & co. Pvt. Ltd.
Manjeet & co.
Kamat Construction Pvt. Ltd.
Kamat Const. & Rsorts Pvt. Ltd.
Shrem Resorts Pvt. Ltd.
Conscient Infrastructure Pvt. Ltd.
Taj Vivanta, Goa
R B S Candiaparcar
Premier Builders.
Sunshine Builders.
Rjeev Builders.
Mandovi Distilleries & Breweries Pvt. Ltd.
Sunshine Electric co. Pvt. Ltd.
S S V Electricals.
Cement Brick Industries
Micron Industies
Mtruchaya Trust.
Apex Computer & Engineering Services.
Mahalsa Sausthan
Pack A Well.
Agencia Commercial Internacional

DETAILS OF EXPERIENCE (From 1980 to 1991) :
1. Worked as Jr, Design Assistant for GOA SHIPYARD LTD for 6 months (from Oct,1980 to March 1981)
2. Worked as Service Engineer for Western India Service Centre, Authorized dealer of Kirloskar Cummins Ltd. For 2 years, 4 months (from March 1981 to July 1983)
3. Worked as Jr. Mechanical Engineer for V.M. Salgaocar & Bro. Pvt. Ltd. For 1 year (from July 1983 to June 1984)
4. Worked as Research Engineer/Service Engineer for Fabril Gasosa / Agencia Sequeira, Authorized dealer of Ashok Leyland Limited for 1 year, 6 months ( from June 1984 to Dec, 1985)
5. Worked as WORKSHOP MANAGER for Structural Fabrication/Erection Engineers (Jaywant Steel Industries) for 5 years (from Jan 1986 to Dec, 1991
Presently I am running my own business of Structural Fabrication and Erection under title of SARAF INDUSTRIAL SERVICES for last 20 years from Jan 1992 onwards.

Following is the list of some of prestigious Projects executed by me :
1. 140 MT Structural Fabrication and Erection for R.B.S. CANDIAPARCAR for their MUNICIPAL MARKET COMPLEX at Panaji Goa. In 2002-2003.

2. 180 MT Structural Fabrication and Erection for M. Venkat Rao Infra Projects Pvt. Ltd. For their RAVINDRABHUVAN PROJECT (AUDITORIUM) at Margao Goa.
9 Nos. Trusses of 7.50 mts. Height and 40 mts. Span weighing 8 MT each were fabricated and erected by my team under my supervision in 2004-2005 with the help of chain pulley block as usage of crane was restricted.

3. Installation of Plant & Machineries like Belt Conveyors, Screw Conveyors, Xylos / M.S. Tanks, Piping and other related Machines like Air compressor, Weigh hoppers etc. for BINANI GLASS FIBRES LTD.

4. Dismantling, loading in lorry, unloading at a new location, Installing and aligning of BALLMILL weighing about 32 MT including alignment of Motor and Gearbox for a Iron ore Mine at Goa, India

5.. Many other small and medium size works were executed by us during past 20 years for our other client Manjeet and company, for their esteem clients like PROCTOR AND GAMBLE , CIBA now CINGENTA (I) LTD.
6. Also executed works of structural fabrication, Roofing and Machinery Installation works for many small & medium size companies in different Industrial Estates in Goa.

7. Also completed works of designing fabrication and erection of Structures and Roofing of many small and medium size Industrial Sheds

8. Presently I am handling Structural Fabrication and Erection and Roofing 2 nos. sheds for Mandovi distilleries and Breweries Pvt. Ltd. And other miscellaneous works for Hotel TAJ VIVANTA Goa, and Goa Cricket Association, Goa.

Dinesh Saraf

[Unregistered]

RESUME
BHAGATH KUMAR THADUKA
E mail : bhagathkumarthaduka AT gmail.com
Hyderabad.

CAREER OBJECTIVE :
I am a fresher in the corporate culture, but ready to accept challenges, utilizing my smart working ability and fresh thoughts to benefit the organization and contribute substantially to its development.

ACADEMIC QUALIFICATIONS :
Examination passed Discipline College Year of passing
Class % Of Marks
B.Tech Electrical and Electronics Engineering KG Reddy college of Engineering & Technology 2012 FIRST 68.50
Intermediate M P C Sri Venkateshwara Junior College, Karimnagar
2008 FIRST 81.1
SSC - Sri Saraswathi vidyanikethan, Sircilla 2006 FIRST 67.30

KNOWELDGE IN SOFTWARE :
1. High Level Language : C,C++,Embedded-C
2. Assembly Language : Assembly language for 8051
3. Operating System : Microsoft windows xp/vista/7, Linux.

TRAINED FOR EMBEDDED COURSE :
I have taken 6 months training course on Embedded systems.

MINI PROJECT WORK DETAILS :
Name of the project : VOLTAGE REGULATOR PANEL (VRP)
Description of the project :
This VRP is an automatic voltage regulating and current limiting panel for the auxiliary generator for use of battery charging and to supply control power. The regulator cards BN &BX continuously senses the voltage and current output of auxiliary generator respectively and controls the flow of power to the generator field through power card. In our project we are dealing with voltage regulation of auxiliary generator for the battery charging.

MAIN PROJECT WORK DETAILS :
Name of the project : SOFT START OF 3- INDUCTION MOTOR BY USING 2 BACK TO BACK SCRS CONNECTION

Description of the project :
This project is mainly aims to control the input voltage by means of solid state switches. In this we are gradually increasing the voltage. This voltage is controlled by controlling the conduction angle of switches.

PERSONAL SKILLS :
- I can adjust in any kind of environment.
- I am a good team worker.
- I take responsibility for my actions and am solutions-oriented.
- I can motivate others in their work.

PERSONAL PROFILE :
Father’s name : T.Vishwanatham
Occupation : Journalist
Gender : Male
Date of Birth and age : 13th July, 1991; 22 Years
Religion : Hindu
Nationality : INDIAN
Marital status : Unmarried
Mother Tongue : Telugu
Languages known : Telugu, Hindi and English.
E-mail ID : bhagathkumarthaduka AT gmail.com

OTHER DETAILS :
- SEMINARS :
- Seminar on “COGNITIVE RADIO” in JNTU, Karimnagar.
- Seminar on “OVER VIEW ON FACTS” in KG Reddy college of engineering & technology, Hyd

EXTRA-CURRICULAR ACTIVITIES :
- Participated as a trainer to the school children in the contraptions project.
- Participated in the training program conducted for mofussil journalists.
- Participated in intra college cricket tournament.

DECLARATION :
I hear by declare that the above mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above mentioned particulars.

Date : 08/04/2013
Place : Hyderabad
(T.BHAGATH KUMAR)

[Unregistered]

Fabrication & Erection and Commissioning in Power Project and Cement Project.
Exp-12 years